How to Export a RGB

I have to send a company a photo in RGB format - I can convert it from JPEG to RGB, but can not get it to export out of Photoshop Elemement 11 - Also I really am not sure what RGB is, perhaps I don't need to know, but maybe it would help - I got a file onto my desktop that I believe was saved as RGB, but can not remember how I did it?
Also can I share from Photoshop Elements 11 to other sites such as Istock or FB?
THANKS Twigs99

In full editor, expert mode, go to Image menu>Mode, and check RGB color.
JPEG is a file format. After you have finished editing in PSE, go File>save as, and for the file format select JPEG.
Hope that this clears up the confusion for you.

Similar Messages

How to export grayscale (not RGB) from LR3

I am processing hundreds of scanned B&W negatives and want to work on them in Lightroom. However, grayscale is not an option in 'export', so I have to export as RGB (@ 3 times the size), then open them in Photoshop, and change them back to grayscale - a crazy convoluted workflow!
Am I missing something, or is there really no way to export grayscale out of Lightroom?

I would like to find a plausible explanation as to why a color scan of a monochrome original is better than a monochrome scan. It is a thoroughly established law of physics that the information content of a fully predictable signal is zero. What I mean is that if the R, G and B channels of the monochrome are identical, then “upgrading” from a single-channel scan to a three-channel scan produces perfectly predictable results (two additional channels, identical to the first one) and NO new information. But what if the R, G and B channels of the monochrome are not identical? What is the cause and source of this difference?
Assumption 1: all sub-pixels (RGB) of the scanning head are co-located (scan precisely the same spot of the original). In this case any difference between the color channels is simply processing errors (nonlinearities, inter-channel differences in calibration), and a 3-channel scan produces no new information over a 1-channel scan.
Assumption 2: the three sub-pixels are slightly offset to each other. In this case each channel scans a slightly different set of spots from the original, and combination of the three channels might produce additional information (extra resolution, if the channels are properly combined).
Further along this line of thought: I guess assumption 2 is correct and the three sub-pixels are slightly offset to each other. Perhaps all scanners are designed to work with color originals and the conversion to monochrome in the scanner is less than optimal, and should be done in post-processing rather than in the scanner? Another line of thought: even if the original and its digital representation are monochrome, we are using three-color monitors to view monochrome images. Operating systems use technologies (eg Microsoft’s Crystal View) that use the three-color sub-pixels to antialias black-and-white text. Because humans’ visual acuity for color is much lower than the acuity for monochrome, the colored sub-pixels used for antialiasing are not normally perceived as colored blotches but rather as smoother gradations in grayscale. Along this line of thought, it might be possible that a three-color version of a monochrome image produces smoother gradations of tone than a monochrome version of the same image does, when viewed on a three-color monitor.
Just speculating, of course, in absence of solid knowledge.
Antero

How to export a data as an XML file from oracle data base?

could u pls tell me the step by step procedure for following questions...? how to export a data as an XML file from oracle data base? is it possible? plz tell me itz urgent requirement...
Thankz in advance
Bala

SQL> SELECT * FROM v$version;
BANNER
Oracle DATABASE 11g Enterprise Edition Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE    11.1.0.6.0      Production
TNS FOR 32-bit Windows: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
5 rows selected.
SQL> CREATE OR REPLACE directory utldata AS 'C:\temp';
Directory created.
SQL> declare
2    doc DBMS_XMLDOM.DOMDocument;
3    xdata XMLTYPE;
4
5    CURSOR xmlcur IS
6    SELECT xmlelement("Employee",XMLAttributes('http://www.w3.org/2001/XMLSchema' AS "xmlns:xsi",
7                                  'http://www.oracle.com/Employee.xsd' AS "xsi:nonamespaceSchemaLocation")
8                              ,xmlelement("EmployeeNumber",e.empno)
9                              ,xmlelement("EmployeeName",e.ename)
10                              ,xmlelement("Department",xmlelement("DepartmentName",d.dname)
11                                                      ,xmlelement("Location",d.loc)
12                                         )
13                   )
14     FROM   emp e
15     ,      dept d
16     WHERE e.DEPTNO=d.DEPTNO;
17
18 begin
19    OPEN xmlcur;
20    FETCH xmlcur INTO xdata;
21    CLOSE xmlcur;
22    doc := DBMS_XMLDOM.NewDOMDocument(xdata);
23    DBMS_XMLDOM.WRITETOFILE(doc, 'UTLDATA/marco.xml');
24 end;
25 /
PL/SQL procedure successfully completed.
.

I'm trying to find out how to export my apple contacts to the Salesforce software and they need to be in a csv format and I don't know if this is possible and how to do it if it is?

I'm trying to find out how to export my apple contacts to the Salesforce software and they need to be in a csv format and I don't know if this is possible and how to do it if it is?

I think there are third-party programs which will do that, but you can also do it with Automator:
See the links in my post, here: https://discussions.apple.com/message/22390873#22390873
The file or clipboard contents will be in Tab Separated vars, so you'll have to open with a spreadsheet program and save as Comma Separated Vars format.

In SSMS after creating the query Report, how to export excel the same report from SSMS

for Beginners in SSMS after the report is created , how to export the same report to excel, I did try the option to task and export and follow the procedure, this procedure does not export the same report, the one was created, unless I am missing some steps,
is there a way to do just like we do in SSRS go to solution explorer, and properties and add the Target Server URL or not
in SSMS,
after I save the report it saves in project , can some one please guide me how to do it, and what steps I am doing wrong,
any help will be great. I am not technical person, just starting to learn from internet.
thanks in advance.

As you have said you are not a technical person try using Import Export wizard.
Refer this link
http://www.mssqltips.com/sqlservertutorial/203/simple-way-to-import-data-into-sql-server/
And another simplest one is to copy the result set from the query window. Right click the result and select "Copy with Headers".
Regards, RSingh

How to export best quality gif animations in flash

how to export best quality gif animations in flash

GIF is a color restricted format with on/off support for transparency. There's really no settings you can tweak to output a better GIF. You have a drop-down during GIF sequence export to allow transparency, select the amount of colors (up to 256) and you can choose dither to save a little filespace. The only 2 things in there that really matter are dither and amount of colors used to export.
If your content is very similar (e.g. not a lot of complex gradients/shadows/etc) and is limited in color use turning down the amount of colors used and dithering is your only option.
Make sure you're exporting the GIF via "Publish Settings" so you get a single animated GIF and not file->export->movie because this creates a separate sequence of GIF images for each frame.

How to export data with column headers in sql server 2008 with bcp command?

Hi all,
I want know "how to export data with column headers in sql server 2008 with bcp command", I know how to import data with import and export wizard. when i
am trying to import data with bcp command data has been copied but column names are not came.
I am using the below query:-
EXEC master..xp_cmdshell
'BCP "SELECT * FROM   [tempdb].[dbo].[VBAS_ErrorLog] " QUERYOUT "D:\Temp\SQLServer.log" -c -t , -T -S SERVER-A'
Thanks,
SAAD.

Hi All,
I have done as per your suggestion but here i have face the below problem, in print statment it give correct query, in EXEC ( EXEC master..xp_cmdshell @BCPCMD) it was displayed error message like below
DECLARE @BCPCMD
nvarchar(4000)
DECLARE @BCPCMD1
nvarchar(4000)
DECLARE @BCPCMD2
nvarchar(4000)
DECLARE @SQLEXPRESS
varchar(50)
DECLARE @filepath
nvarchar(150),@SQLServer
varchar(50)
SET @filepath
= N'"D:\Temp\LDH_SQLErrorlog_'+CAST(YEAR(GETDATE())
as varchar(4))
+RIGHT('00'+CAST(MONTH(GETDATE())
as varchar(2)),2)
+RIGHT('00'+CAST(DAY(GETDATE())
as varchar(2)),2)+'.log" '
Set @SQLServer
=(SELECT
@@SERVERNAME)
SELECT @BCPCMD1
= '''BCP "SELECT
* FROM   [tempdb].[dbo].[wErrorLog] " QUERYOUT '
SELECT @BCPCMD2
= '-c -t , -T -S '
+ @SQLServer +
SET @BCPCMD
= @BCPCMD1+ @filepath
+ @BCPCMD2
Print @BCPCMD
-- Print out below
'BCP "SELECT
* FROM   [tempdb].[dbo].[wErrorLog] " QUERYOUT "D:\Temp\LDH_SQLErrorlog_20130313.log" -c -t , -T -S servername'
EXEC
master..xp_cmdshell
@BCPCMD
''BCP' is not recognized as an internal or external command,
operable program or batch file.
NULL
if i copy the print ourt put like below and excecute the CMD it was working fine, could you please suggest me what is the problem in above query.
EXEC
master..xp_cmdshell
'BCP "SELECT * FROM
[tempdb].[dbo].[wErrorLog] " QUERYOUT "D:\Temp\LDH_SQLErrorlog_20130313.log" -c -t , -T -S servername '
Thanks, SAAD.

How to EXPORT a concurrent program from one instance to another

Hi,
I am new to EBS.
How to EXPORT a concurrent program from one instance to another. I dont want to use FNDLOAD.
Is there any other way from where we can export the concurrent program to anothere instance from CLIENT connection server.
Thanks
Asis

Hi;
What is EBS version? Why you dont use FNDLOAD?
Pelase see below thread
Move concurrent program to prod
Move concurrent program to prod
Regard
Helios

How to export Tabel? (Exporting and Importing of RFCDES table)

Hi,
We are doing system Refresh on qualitysystem,
I want to export the Tables and reimport them after system refresh
Tables like: RFCDES
How can export this table ?
How to import the table?
It is very urgent, Please give me the solution as soon as possible
Note: we are using BRTOOLS
Points awarded
Regards,
Ravi

Hi Ravi,
Create a control file like "rfcdes_export.ctl"
export
file '/usr/sap/data/export_rfc.dat
delete from rfcdes
select * from rfcdes
Take the export :
R3trans -w rfcdes_export.log rfcdes_export.ctl
Create the control file "rfc_import.ctl"
import
file '/usr/sap/data/export_rfc.dat'
Import it:
R3trans -w rfc_import.log -u 1268 rfc_import.ctl
Hope it will help you.
Best Wishes.
Kumar

How to export photos from photo gallery to my iPad

How to export photos from photo gallery to my iPad

I had no trouble finding the "Export" tools in the "File" menu. They are greyed out when no photo is selected, but they are functional after selecting one or more photos.
I agree that it would be nice to have the "Reveal in Finder" option back, but they probably don't want us mucking about inside the Photos library structure.

How to export photos from lap to to ipad

how to export photos from lap top to ipad,i keep draging them in ipad devise logo,photos jump back in place.if i click on to export in i photo,it only would go to files??????help!!

Use the photo set up in the iTunes sync
LN

How to export photos from iMac to iPad and iPhone

How to export photos from iphoto to my iPad and iPhone the easiest way.

There are a number of methods including:
Via iTunes and USB cable: iTunes: Syncing photos - Apple Support
Via Photo Stream: http://support.apple.com/en-us/HT201317
Via 3rd party app: http://www.photosync-app.com
Via 3rd party cloud services such as Dropbox

How to export photos from one iPad to another

How to export photos from one iPad to another

Sending the photos over WiFi might be the easiest way for you to accomplish this. The Wireless Transfer App should work. You will both have to download the app on your own devices. Read about it here.
http://www.wirelesstransferapp.com/

How to export pictures from my ipad to my computer

HOW TO EXPORT PHOTOS FROM MY IPAD ?

How to Transfer Photos from an iPad to a Computer
http://www.wikihow.com/Transfer-Photos-from-an-iPad-to-a-Computer
Importing Personal Photos and videos from your iOS device to your computer.
http://support.apple.com/kb/HT4083
Also check out the Photo Manager Pro app.
https://itunes.apple.com/us/app/photo-manager-pro/id393858562
 Cheers, Tom

How to export data from a Oracle table to a delimited file?

I know how to load delimited file into a table, but how to export
data from a Oracle table to a delimited file?
Thanks in advance.

Try looking at this link, it's long but there's three different solutions discussed in it. If you look at Barbara Boehmer's
solution in her posts in the link below you'll see that she's addressed your concerns with spool files.
Re: utl_smtp and triggers

How to Export a RGB

Similar Messages

Maybe you are looking for