How to export a video at a moderate certain format and size in premiere CC 2014: No Huge File Results!

I have the latest version of Adobe Premiere, CC 2014 but whenever I want to render and export a video that is typically 70 megabytes in size I can't seem to always see how big the file will end up being for all the formats and I don't want to end up with a video larger than 250 to 300 megabytes in size just for the extremely best or highest quality even though I want the video to be well polished and in better quality than I usually get thee, These videos are usually imported as mp4. What file version of mp4 or otherwise would give me an originally imported video of 70 megabytes an output of no more than or around 300 megabytes or even less without compromsing video quality? I don't want a huge file size as I am uploading it to my YouTube channel via their web interface on another person's machine and they don't have Premiere and only has a DSL connection. So what video output settings should I use for a good quality video that isn't smaller than the original but the same size or a bit higher and not extremely large like MOVs and sometimes mp4s usually are depending on what you do to it and it is outputted.?

Export
Format: H.264
Preset: YouTube (make sure this matches the dimensions of your sequence)
You could further adjust the Target Bitrate but the preset is already setup for a good quality file for upload.
You can also do further reading on Video Bitrates.

Similar Messages

I'm trying to find out how to export my apple contacts to the Salesforce software and they need to be in a csv format and I don't know if this is possible and how to do it if it is?

I'm trying to find out how to export my apple contacts to the Salesforce software and they need to be in a csv format and I don't know if this is possible and how to do it if it is?

I think there are third-party programs which will do that, but you can also do it with Automator:
See the links in my post, here: https://discussions.apple.com/message/22390873#22390873
The file or clipboard contents will be in Tab Separated vars, so you'll have to open with a spreadsheet program and save as Comma Separated Vars format.

How to export HD-project to .avi including HD-quality and timecodes

Hi,
I have an iMovie HD 6 project that I have imported from my Sony HDR-HC3 HD video camera. The project is a HD-1080i-25 project. I want to export this project to an AVI keeping the HD quality (same quality as the DV-tape). What settings should I use to make this happen? I don’t want to export it as a QuickTime .mov file but as an .AVI file that I am able to play in a media player that supports HD. I also want to keep the 16:9 format and timecodes. One other purpose with this file is as a backup (if the DV-tape should be damaged) so it must be possible to import it into iMovie again if that should be necessary.
Is all this possible?
Thanks in advance.
Jarle

Your best option is to export to .dv using the Full Quality DV preset. It will preserve all quality including the timecode.
On the other hand the Expert export settinngs of iMovie 5 and 6 are buggy because exporting via the expert settings as a DV stream or .avi deinterlaces video and loses the timestamp!!
Workarounds: Export .dv via the Full Quality preset (this is more convenient anyway). Exporting as .dv (or DV-encoded .avi) via QuickTime Player Pro also preserves interlacing and timecode.
http://www.sjoki.uta.fi/~shmhav/iMovieHD_6_bugs.html#expertsettings
If you export via QuickTime Player Pro, then use the following settings:
Export: Movie to DV Stream
DV Format: DV
Video format: PAL (I am European)
Scan: Interlaced (notice that this option only sets the corresponding flag -- it does not do ANYTHING else to the video!)
Aspect Ratio: 16:9 (this options also sets the corresponding flag so other apps can properly treat the file)
Audio Format Rate: 48.000 kHz (I believe there is not much difference between locked vs unlocked audio -- unlocked seems to be the default)

Hello guys! Do you know how to make a video smaller on imovie? Not by size or trim, i mean simply show the video as small as possible in the middle of the screen! Please text back.

Hello guys! Do you know how to make a video smaller on imovie? Not by size or trim, i mean simply show the video as small as possible in the middle of the screen! Please text back.

Go to the Map, Background & Animatic Browser (last button in the centre tool bar alongside the Transition button). Drag the Black background (or any background) to your project. From an Event, drag the video selection directly onto the Black clip in the project. As you drop the video clip, a pop-up menu will appear. Select Picture in Picture.
Your video will appear as a small picture within the black clip. Click on it and reposition it to the centre of the viewer, using the yellow guide lines to get the exact centre position. Resize the Picture in Picture if desired by dragging the corner handles.
NOTE: You may need to extend the duration of the Black clip to match the duration of the video clip. Double-click on the Black clip to open the Inspector, then adjust the duration there.
John
Message was edited by: John Cogdell - added NOTE

Need advice/guidance on how to export .FLV videos for my website.

Can anyone help me?
I am trying to embbed a .swf/.flv video into my website,
using dreamweaver and flash cs4. But when i do so, and i load the
video, the .FLV playback componet wont load or the browser dosent
even try to load the data at all, it just plays the video. So users
cant mute, have volum control, pause, stop or anything. Can someone
please help me? i looked all over the net for 2 days and cant find
a single turtorial or anything. I know alot of website use .FLV but
how? and how do you export it?

You need three parts for the flv playback: the swf, the flv,
and the video player skin swf. If you create the flv from your
Flash movie by importing the original video, Flash should make all
of those parts for you. Upload each of these files to your server
and the file should play as expected.
Can you describe in more detail what you are doing that may
be different?

How to export to video while MCs included

hi there. I develop almost a timeline based animation but i
have some movie clips in it. i need to export my swf to video
formats like .avi or .mpg or .mov but when i exported it, movie
clips were ignored. do i need to deal with after effect or other
3rd party softwares? i can't believe if there's no native way. do
you have any idea?

Google "export video from flash":
Flash Professional Help | Exporting Graphics and Videos
http://www.fladev.com/tutorials/how-to-export-video-from-flash/
Flash CS6 Tutorial - Export as Movie / Video - YouTube

How to export a video in Final Cut Pro to Facebook

hey guys, im trying to export a video for facebook and i cant seem to get the settings right for the life of me. any suggestions?
Scott

H.264...800mbps or 300mbps. Compressor has Quicktime 7 streaming presets for this.
Shane

Problem Exporting a Video Originally Imported using F4V Format

the last version of flash i used with Macromedia Flash MX. Now i'm using Flash CS6, in fact this is my first time using it and i've been trying to get this task done for just over 12 hours now but i can't seem to figure it out....
I have 3 videos that i split up into 3 scenes using windows live movie maker
then i used media encoder to convert all the cenes to F4V
From there, i imported the first Scene of each video into individual layers in Flash CS6 used the "Load external video with playback Component Method
The reason why i use that method was because when i use the other method with the video in FLV format the video and audio was out of sync when i exported/test scene
with the load external video method it works perfect in test scene... pretty much the way i want it to, however when i export the video it doesn't even play my best guess is that's because each video is only on one keyframe. and needs to be converted and action added.
am i right? where do i go from here? how can i export these scenes... what am i missing?

these are the supported youtube formats:
.MOV
.MPEG4
.AVI
.WMV
.MPEGPS
.FLV
3GPP
WebM
and, of those, only mov and avi can be exported from flash pro. those exports are usually unsatisfactory because flash pro is not a video editing program. ie, you are using the wrong tool for the job.
check adobe premiere.

I can´t send my videos fom my PC to my Ipad because the videos are in the .MP4 format and not in the .mp4, is there other types of .mp4 and then how I can send my videos to my Ipad?

Hello everybody!
I have a problem with my videos, well first of all I took videos with a camera for my school proyects and then I want to send those videos to my Ipad but there is a problem because when I tried to send my videos it said that those videos could not be synced and then I checked the video´s properties and it says that the format of those videos are .MP4 instead of the .mp4 format and i want to ask the community if there are other types of .mp4 formats and how I can send my videos?
Please reply because I really need those videos for my school proyect.
(sorry if my english is bad I dont use to speak english)

Please upload the distmgr.log and PkgXferMgr.log to Skydrive and post the link here.
Juke Chou
TechNet Community Support

How do I watch videos in Windows Media Player format?

How do I watch videos that are made in Windows Media Player format?

http://www.telestream.net/flip4mac/overview.htm
Message was edited by: WZZZ

Exporting a video, but it comes out the wrong size

When I export a video, i am trying to have it come out 1280 X 720 (720p) but when I export it, it comes out 720 X 480 (480p) Any ideas why?
I am using After Effects CS6 and here are the settings

No. Quicktime is NOT A CODEC. It's a media container like an avi or mxf. It contains files encoded using codecs.
Codec = COde DECode. Get it?
You just keep exploring those Output Module settings and eventually you'll stumble on a whole big list of codecs: Animation.... Photo JPEG... PNG... Motion JPEG... and so forth.
If you're lucky, the list will include the codec in which your original footage was encoded.

How to export an eloqua report to a (ftp) server and schedule this export

I would like to export an eloqua report to a (ftp) server and schedule this export. I want to pick this report up by another tool like Qlikview.
Liesbeth

if it is something to do with having report admin rights is there a way to still export report data without these admin rights? is it possible to just export report data as activity data in the normal import/export section within the setup menu? is there a problem using filezilla client and oracle eloqua together for this?

Video card GeForce 820m is compatible with CUDA in Premiere CC 2014?

Hello, I bought an Asus notebook and I wonder if the GeForce 820m graphics card is compatible with CUDA in Premiere CC 2014? Tks.

Export
Format: H.264
Preset: YouTube (make sure this matches the dimensions of your sequence)
You could further adjust the Target Bitrate but the preset is already setup for a good quality file for upload.
You can also do further reading on Video Bitrates.

How to get batch job o/p in PDF format and automatically saved to xyz loc

Hi Experts,
Our requirement is we want output of background job in PDF format and this PDF generated should be saved in some xyz path at OS level.
Why doing this?: Business don't want hard copy o/p of some batch jobs but only want to save this output in pdf format to some OS location for future use.
We could achieve above objective by archiving method (but for some reason we cant adopt it).
So guys please propose solution in detail regarding above problem "how to get o/p in PDF format and automatically get saved to xyz location"
System : 4.0B
OS : Windows NT
Database : Oracle
Thanks in advance

Hi guys,
Thanks guys for your invaluable advise.I asked abaper to use the above report for pdf conversion. But I have another problem that o/p of batch job should come in japanese language but when i check spool or hard copy o/p its not coming in readable form (seems something like machine language) . I dont what is the reason there must be some basis setting to get the batch job o/p in japanese language.
Please help me.
thank you

How to export a video with an alpha channel that can be switched off

Hi!
I'm stuck with something that I think might have a simple solution:
I need my video to have an alpha channel while still keeping all the RGB information in place too. This is for Syntheyes, which can take the alpha channel for a video and use it as a garbage matte while tracking.
The problem is that if I draw a mask around my video and then export as a PNG (with alpha), the RGB information seems to be gone even when I choose to ignore the alpha channel. I know how to edit the alpha channel in Photoshop while still keeping the RGB elements untouched, but how should I do that in AE?
Any help will be appreciated!

Okay I will answer my own question:
This worked as soon as I did a proper export as a PNG image sequence. I did my tests with only single frames by using the "save frame as file" -function, which did not work properly (the rbg information was gone).
So the simple solution to this question was:
Draw a mask on the video layer and export with alpha. The RGB will be there, even though the mask hides it in AE.

How to export a video at a moderate certain format and size in premiere CC 2014: No Huge File Results!

Similar Messages

Maybe you are looking for