How to export ALL my GPS data with photos?

Hi,
I hope you can help me save a lot of time.
For various reasons I have abandoned Aperture 3 in favour of Lightroom 5, and as part of the process (severl months ago) I exported all my 30,000 photos out of my aperture library along with sidecar files so that I would be able to keep my metadata. All but a few gopro phots are geotagged, however I have now discovered that for 14,000 of these images no GPS data was included in the sidecar file.
As far as I have been able to research I have two options. First to re-build the library by re-exporting the files, merge this with my current Lightroom library and hope I don't get any duplicates. Or, secondly, re-tag the 14,000 photos manually or from the GPX files I still have hanging around.
What I really would like to know is if there is a 3rd option?
What would be nice is a way to export only the GPS data and time stamps for all 30,000 and then use that as a track in Lightroom...is that possible?
Thanks for any help

I'm not aware of a way to do that from Aperture but it should be possible to script that ability.
Just run through all the images and have the script output the EXIF data you want. Not to difficult if you have any Applescript experience. If not I'm afraid you will need to resort to your other options.
regards

Similar Messages

Add or edit geotag (GPS) data with Photos App

Geotag is an EXIF metadata associated with a single photo that give the geographical location of where the photo has been taken. At this time, the geotag EXIF is fully supported by Photos (we see the location on a map) and we have the option to strip the information when we share the photo. To work with Photos, the EXIF geotagging info must be embedded with the photo when it is transferred from the camera to the Photos App.
However, many cameras don't have a GPS that sets the photo location. The geotag must be added later manually. Some photo editing software strip EXIF data (or just Geotag data) and sometimes these photo editor apps set geotag of their own (the location where the picture is edited, not the original location where the picture comes from).
It would be nice to add a geotag addition/edition feature to Photos.app.

Now that iCloud drive keeps the photo library synced between all devices it would be nice if there was a way to edit tags, geotags, descriptions, etc. on iCloud.com as well as IOS.
I tested to add GPS using AppleScript, but most of the EXIF field are readonly and we cannot change the GPS tags with Apple Script in iPhoto. It was possible to do that in Aperture, but does not work in Photos.
Right now, it is best to add GPS before importing to Photos.

How to delete all previous icloud data from current icloud after sighning in with the current icloud account

so i sighned into someone elses device with the current icloud account and i sighned out. Some of the icloud data from the other device is now on mine. All i want to know is how to delete all the icloud data in my current icloud account from the other icloud account

Hello ,
I had the same problem and i have done everything manually.
It's a shame that Apple doesn't put a "Reset to factory Settings" button or simply "Delete all data from iCloud.com". That way, it would be much simpler for everyone including myself.
Winston Churchill is right unfortunately . Happy deleting !
Kind Regards,
Moonburn

How to export All computer list with operating system from AD and all attributes like disable or enable and OU location also?

how to export All computer list with operating system from AD and all attributes like disable or enable and OU location also?
I have tried with dsquery below but status is not showing there.
dsquery * -filter "(objectCategory=computer)" -attr name operatingSystem

last logon user name - not really stored (or lined) with computer object. However, you can get this info during the logon process or from the computer. Here is method:
http://portal.sivarajan.com/2010/07/user-profile-and-os-info-powershell.html
Santhosh Sivarajan | Houston, TX | www.sivarajan.com
ITIL,MCITP,MCTS,MCSE (W2K3/W2K/NT4),MCSA(W2K3/W2K/MSG),Network+,CCNA
Windows Server 2012 Book - Migrating from 2008 to Windows Server 2012
Blogs: Blogs
Twitter: Twitter
LinkedIn: LinkedIn
Facebook: Facebook
Microsoft Virtual Academy:
Microsoft Virtual Academy
This posting is provided AS IS with no warranties, and confers no rights.

How to export the text edit data to excel file without splitting the data in excel file?

how to export the text edit data to excel file without splitting the data in excel file?
I have a requirement in SAP HR where in the appraiser can add comments in the area given and can export that to excel file. Currently the file is getting exported but the comments getting split into deifferent rows.
I want the entire comment to be fit in one row.
Please help.
Thank you

Hi,
if your text edit value is stored in 'lv_string' variable.
then before exporting the value to excel you have to remove CL_ABAP_CHAR_UTILITIES=>NEWLINE
that is '#' from the variable lv_string.
for that use code some thing like this.
REPLACE ALL OCCURRENCES OF CL_ABAP_CHAR_UTILITIES=>NEWLINE in lv_string WITH space.
I think this will do the trick.

I have a 3GS iPhone, version 3.1.2. I have never plugged my phone into a computer or synced with iTunes. If I do so now, I will I lose everything? What steps need to be taken to ensure that all of my data, contacts, photos, etc. are not lost?

I have a 3GS iPhone, version 3.1.2. I have never plugged my phone into a computer or synced with iTunes. If I do so now, I will I lose everything? What steps need to be taken to ensure that all of my data, contacts, photos, etc. are not lost?

IOS: how to back up http://support.apple.com/kb/HT1766

How to export all the man page in mac to PDF?

How to export all the man page in mac to PDF?
I have tried "man -t cat | pstopdf -i -o ~/Desktop/cat.pdf" but this only output one page.
How could I dump all the man pages to pdf with one or few command as possible?
The other question is, I copy all the man pages form /usr/share/man, they are .gz.
After I unzip them and open with less, texteidtor, ultraeditor, all the formate are weird.
Is there any tool could open them with the right formate as man does?
I know the man in linux uses the tool "less" to read man pages. How about mac???

I use Bwana. Copy all and paste into TextEdit. Then, save it. This is the beginning for diskutil:
diskutil(8)               BSD System Manager's Manual              diskutil(8)
NAME
     diskutil -- Modify, verify and repair local disks.
SYNOPSIS
     diskutil [quiet] verb [options]
DESCRIPTION
     diskutil manipulates the volume-level structure of local disks. It pro-
     vides information about, and allows the administration of, the partition-
     ing scheme of disks, optical discs, and AppleRAID sets.
VERBS
     Each verb is listed with its description and individual arguments.
     list [-plist | device]
                List disks. If no argument is given, then all disks and all
                of their partitions are listed.
                If -plist is specified, then a property list will be emitted
                instead of the normal user-readable output. If a device is
                specified, then instead of listing all families of whole disks
                and their partitions, only one such family is listed. In that
                case, specifying either the whole disk or any of its slices
                will work. The -plist and device arguments may not both be
                specified at the same time.

ST03 Export: How to export all instances and task types?

I am exporting ST03 data using SAP GUI
I can export data for a single task type and a single instance.Is there a way I can export the Time Profile data for all instances and all task types in a single export? Can I do a single export rather than NxM exports?
Also, when I export to a text file, there is a header that reports the instance, data, and task type. When I export to excel file I only get the table, not the header info. Is there a way to to get the header info into the excel export?
Is this the appropriate forum for these questions?
Any help is appreciated.
Thanks.
Tim

I moved this question to an ABAP forum. Here's the [thread|ST03 Export: How to export all instances and task types?;.
Tim

All my GPS data disappeared

This is something that happened twice.
Suddenly, all my GPS data disappeared from the entire catalog.
Fortunately, I could recover them from my catalog backup.
I can't make out how this could have happened.
Did anyone experience the same problem ?

There are two cases
Case 1 : This happened under LR 5 or even LR 4 a couple of weeks or even months ago. The GPS data got erased everywhere and could not be recovered.
Case 2 : This happened under LR CC. I was lucky to be aware of that problem because shortly after this loss I tried to find photos for a specific location. But there was no GPS data available. By reloading the apparently uncorrupted catalog everything was fine again.
What I think happened
Since all GPS data for the entire catalog disappeared in one instant, I think that the problem lies in my catalog. There must be a file containing a link from the photos the GPS date (or the other way round). I think that link got corrupted or was erased.
In case 1 unaware of this loss I browsed and accessed the photos thereby gradually erasing the GPS data in the photos until none was left.
In case 2, since this is an unforeseen event for LR, the GPS data in the photos were not immediately erased. And I did not access the photos. By reloading an uncorrupted catalog everything was fine again.
Unfortunately I cannot trace what event caused the catalog to get corrupted. All I know is that I was creating and deleting collections.
Believe me, I now constantly check the presence of GPS data via the metadata filter "GPS data".
Does this make any sense to you ?

How to export ALL my contact groups ( 20) from Outlook 2010 on one machine to Outlook 2010 on two other machines

My problem is how to export ALL my contact groups (>20) from Outlook 2010 on one machine (finally established with great pains from a more user-friendly client) to Outlook 2010 on two other computers. All the help files I've seen refer to
export/import of only a single Group.
Outlook seems to be an extraordinarily limited and user-hostile environment for managing an address book. By way of comparison, the Mulberry client I've been using for years (which is no longer supported) run circles around Outlook for ease of
handling -- everything in the address book, groups and individual, can be exported and imported in a single file. My computer support staff have warned me about the difficulties of handling groups in Outlook. Is Microsoft really that incompetent,
or just sadistic ?
Thanks for your help with this.

After a lot of screwing around I finally hit on a solution, which is to export and import contacts using a .pst file (which transfers both individuals and groups) rather than a .csv file -- which transfers only individual contacts but leaves groups untouched.
Why isn't there a clear and simple message from Microsoft saying this in all the so-called Help files on moving contacts in Outlook?

If i associate my apple id with another email will i lose my icloud data or i will still be able to access all my stored data with the new linked to my apple id email address?

hi there
if i associate my apple id with another email will i lose my icloud data or i will still be able to access all my stored data with the new linked to my apple id email address?
i mean i am not signing up for a new account, just changing my old id primary email which is my apple id login into account.
in other words, www.icloud.com will recognize that it is still me if i login on the site? will i be able to see there all my stored information?
and if i change my password, does it automatically changes the @icloud.com password which should be the same as my apple id pass?
thanks

After opening the email it shoud of had you enter the Apple ID and password. Using certian web browser's can cause errors. You can adjust securty settings (big pain) or you use another browser. Using Firefox or Safari should do the trick.
Let me know if using Firefox or Safari resolved it.

How to export all the views in one schema?

Hi,
I have more than 1000 views in one shcema.
How to export all the views in one schema?
Amy

Hi,
It's not a very easy question, I have develop a script wich create a script to create view from old database to new database :
/* &1: Oracle SID Source
/* &2: Oracle Schema Source
SET HEAD OFF
SET VERIFY OFF
SET PAGESIZE 0
SET LONG 40000000
SET LONGCHUNKSIZE 2000
SET LINESIZE 2000
SET FEEDBACK OFF
CREATE TABLE RECREATE_VIEW(VIEW_NAME VARCHAR2(30), TEXT LONG);
/* Selection du texte de la vue */
DECLARE
w_text long;
w_text_debut long;
w_text_column long;
w_view varchar2 (30);
w_schema varchar2 (8):='&2';
CURSOR w_cursor IS
SELECT a.view_name, a.text
FROM dba_views a
WHERE a.owner = w_schema;
CURSOR w_column IS
SELECT DECODE (ROWNUM,
1, 'CREATE OR REPLACE FORCE VIEW ' || '&' || '1..'
|| a.table_name || chr(10)
|| '('
|| a.column_name
|| DECODE (ROWNUM, nbcolumns, ')' || chr(10) || 'AS' || chr(10), ',' || chr(10))
FROM (select column_name,table_name
FROM dba_tab_columns
WHERE owner = '&1'
AND table_name = w_view
order by column_id ) a,
(SELECT COUNT (1) nbcolumns
FROM dba_tab_columns
WHERE owner = '&1'
AND table_name = w_view
GROUP BY owner, table_name) b
order by rownum;
BEGIN
OPEN w_cursor;
LOOP
FETCH w_cursor INTO w_view, w_text;
EXIT WHEN w_cursor%NOTFOUND;
w_text_debut := NULL;
w_text_column := NULL;
OPEN w_column;
LOOP
FETCH w_column INTO w_text_column;
EXIT WHEN w_column%NOTFOUND;
w_text_debut := w_text_debut || w_text_column || ' ';
w_text_column := NULL;
END LOOP;
CLOSE w_column;
w_text := w_text_debut||w_text||';';
insert into RECREATE_VIEW(VIEW_NAME, TEXT) VALUES (w_view, w_text);
COMMIT;
w_text := NULL;
w_view := NULL;
END LOOP;
CLOSE w_cursor;
END;
SPOOL scripts_views_&1..sql
PROMPT SPOOL scripts_views_&1..log
PROMPT
SELECT TEXT
FROM RECREATE_VIEW;
PROMPT
PROMPT SPOOL OFF
PROMPT
SPOOL off
PROMPT /* Formattage du fichier SQL */
!sed 's/[ ]*$//' scripts_views_&1..sql > aprilia.tmp
!rm scripts_views_&1..sql
!mv aprilia.tmp scripts_views_&1..sql
DROP TABLE RECREATE_VIEW;
EXIT
I hope that help you.
Nicolas.

Is it possible to remove or edit gps data from photos?

Just listened to a Mac Roundtable podcast and they were talking about removing or editing gps data from photos taken with an iPhone but they never explained how to do it.
Is it possible to remove or edit out latitude and longitude info from photo files?

Thanks for this, though after looking at it I'm not too inclined to use an app that requires getting into the terminal. Way too technical for me. But thanks.

I lost my macbook pro and i just got a new one. how can i retrieve the pictures taken with photo booth(old laptop) to my new laptop?

i lost my macbook pro and i just got a new one. how can i retrieve the pictures taken with photo booth(old laptop) to my new laptop?

Well if you don't have the laptop to get the storage drive out of it, and you don't have any previous backups how do you expect to get the photo's?
PhotoBooth is just a program, it stores the files on the computers storage drive, if the computer is lost so are your photo's.
There is nothing you can do to delete or retrieve them using your new computer unless you stored them online someplace.
DId you save them online? iDisk or something else?
I don't use such services because my data is mine and not theirs to snoop through, so if your looking for that sort of help I can't assist you any.

How to export all tracks into audio files with the same duration

Hi everybody.
I am trying to export all the tracks into different audio files.
It's 10 soft. instruments and an audio track. I tried with "File>Export>All Tracks as Audio File but the result is 11 audio files with different lengths. As the song is 3 minutes and 20 seconds I would like every single track to be 3.22 sec long.
How do I do it? In fact, each track is composed not only by played instruments but also by moments of silence.
Thanks!!
Alessandro

sambino wrote:
I tried with "File>Export>All Tracks as Audio File but the result is 11 audio files with different lengths. As the song is 3 minutes and 20 seconds I would like every single track to be 3.22 sec long.
The files are different lengths because each instrument does not stop playing at the same moment. It would accomplish nothing other than waste disk space if Logic appended silence to the end of each file in order to make each track the same length. The different lengths you see mean nothing because the absence of appended silence means nothing.
each track is composed not only by played instruments but also by moments of silence.
Naturally. And that silence is accounted for in your exported files, when the silence appears at the beginning of the track, and when it appears during the track. It just isn't appended at the end because that would be pointless. Consider this project, consisting of four tracks:
When I use the command File > Export > All Tracks as Audio Files, Logic will produce four files that look like this:
The files are not equal in length, which is perfectly fine. What's important is that they all start at bar 1, and will align properly when imported into some other program. So all you need is the command you already used: File > Export > All Tracks as Audio Files. In one step, it will produce all the files you need, and it will produce them correctly.
By using Bounce, you would be gaining nothing except extra work, because you would have to do it separately for each file you wanted to produce. With Export > All Tracks as Audio Files, you get all your files with just one command.
iSchwartz wrote:
exporting tracks means that any panning or automation will not be rendered. So if you want the engineer to put up all of your tracks at unity gain (all faders at zero) and have your tracks & stems reproduce the mix you're hearing at your studio, use bounce, not export.
If you want to have your tracks & stems reproduce the mix you're hearing at your studio, there's no need to go to the extra effort of using Bounce instead of Export. You only need to enable (in the Export dialog) the checkbox "Include Volume/Pan Automation." This is explained on p. 1022. When you do this, any panning or automation will indeed be rendered.

How to export ALL my GPS data with photos?

Similar Messages

Maybe you are looking for