How to export all versions but not masters?

Here's the conundrum:
I have 800 event photos in an Aperture project. I stamp adjustments to all of them. So, now I have 800 stacks, each with a master RAW image and an adjusted version. In each stack, the unadjusted master is the default pick.
If the stacks are closed and I Export Versions, I get 800 JPEGs rendered from the unadjusted masters. If I open all stacks, select all, and Export Versions, I get 1,600 JPEGs rendered from both the masters and the versions.
How in **** do I select the 800 adjusted versions for export without having to command-click on each one?
Is there no way to automatically export just the versions?
The only approach I've found is to select the versions and make them the picks in their stacks, one by one. Then I can close the stacks, select all, and Export Versions. This is painfully time-consuming. I can't even just select the versions one by one and then batch promote them to pick status. I not only have to select the versions one by one, but I also have to promote them one by one.
Argh!
Am I missing something here? Please help.

More trickery:
Select all the images in the project you are going to create adjusted versions of.
Press option V to make stacked versions. Don't deselect anything!
Control click one of the versions and select New from selection > Album
The new album appears and you can name it
Now you have the new versions as album picks (check mark) in the stacks
Close all the stacks with Option semicolon
The new versions are now on the top of the stacks in the new album
Adjust each image as needed (no need to open the stacks)
In the original project the stack picks are untouched
In the album they are adjusted
I think this will speed your workflow somewhat when combined with turning off the automatic versions. Generally speaking with Aperture you want to create new albums for everything you do. They are very flexible and let you go back to practically anything you have done and modify it.

Similar Messages

How to create a custom control of a button where the look will be applied to all others but not the Boolean text?

Hi all
I would like to create a customized button as a master so that if I change the look of the master all other buttons will change too.
I have done this with a custom control as a "strict type def" otherwise the look will not change BUT If I do this as a strict type def I cannot change the Boolean text anymore which should be different on every button.
How can I create a master control of a button where the look will be applied to all others but not the Boolean text?
Stay Hungry, Stay Foolish
Solved!
Go to Solution.

Steve Chandler wrote:
I don't think you can do that. I just looked and as I suspected the Boolean text property is read only for strict typedefs so you cannot use property nodes to change the text.
As a workaround just make it a typedef. When you want to change the look open the typedef and make it strict, make your changes, then make it non strict again. You will have to update the Boolean text again for all instances. Kind of a pain. Maybe this is something for the idea exchange.
Kudos for being sneaky.
I like these creative work-arounds!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Mobile Version: How to see all highlights and notes we made in a PDF document?

Mobile Version (Android): How to see all highlights and notes we made in a PDF document?

I'm moving your topic to the Android forum.

I cannot get GPS Only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX

It seems like I cannot get GPS only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX, garmin blueChart mobile, and a GPS monitoring tool. All show no signal. If I turn on cell and wifi, it says I get gps signal, but can't tell if that is from the GPS chip, or just from cell and wifi only (maybe with some gps mixed in)? Any ideas on how to get iPad working with GPS only??

Roger that. Thanks for your time.
System:
Windows 7 64bit
Processor: AMD phenom IIX4 965
RAM: Gskill Ripsaw F3-12800CL7D-4GBRM (2-2GB sticks)
GPU:EVGA Classified Nvidia GeForce GTX 560 Ti 448 core
PSU: Kingwin 1000W laser gold (LZG-1000)
Yes. tried the one ram stick, no go. I have been trying to boot off/install the windows 7 disk but am unable to get to the point where windows starts installing after its gathering information portion of the install. I can get to the disk selection screen of the install with the WD HD on SATA port 2 but then get the "cant install messages" when I try to select the Vertex 3. Yes I can see the Vertex 3 Drive as well as the WD drive at this point. some times I have to hit "scan" a couple of times.

How to publish iWeb online but not through iCloud but someone else?

How to publish iWeb online but not through iCloud but someone else?
Mybe Google or woodpress,
Or publish iWeb online with iCloud WITHOUT upgrading Lion?

iWeb will still be around but as Jeff pointed out if you want a blog with visitors comments you should consider converting your iWeb blog to WordPress. Rage Software has created an applicaiton that will convert your current iWeb blog w/visitor comments to a Wordpress blog. You can get the application here: Convert Your iWeb Blog to a WordPress Blog.
If you don't have visitor comments then the iWeb blog will continue to work for you on a 3rd party FTP server.
If you have photo pages in your website with the accompanying slideshow you'll need to read the following:
It's now confirmed that iWeb and iDVD have been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. HOWEVER, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
In addition the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on.
HOWEVER, the iLife 11 boxed version that is still currently available at the online Apple Store (Store button at the top of the page) and those copies still on the shelves of retailers will include iWeb and iDVD.
OT

In v.11, how can I capture video but not audio from a camera?

In v.11, how can I capture video but not audio from a camera?

Rodney
I see what you mean....Premiere Elements 10 appears to be the last version that had options for the user to select Capture Video and/or Audio in the its Capture Window.
If you are doing DV data capture firewire into the Premiere Elements 11 Capture Windows and want a final file without audio and you cannot do this at the camera level, then consider....
1. Do the Capture "to the Timeline" - video linked to audio result on the project's Video Track 1
a. Right click the Timeline DV AVl and select Delete Audio and then edit accordingly.
or
b. Import the DV AVI but, when you go to export it, in the export settings, remove the check mark next to Audio so that the export contains only the video portion.
Publish+Share/Computer/AVI with Presets = DV NTSC Standard
Please let us know if any of that worked for you.
Thank you.
ATR

How to export all the man page in mac to PDF?

How to export all the man page in mac to PDF?
I have tried "man -t cat | pstopdf -i -o ~/Desktop/cat.pdf" but this only output one page.
How could I dump all the man pages to pdf with one or few command as possible?
The other question is, I copy all the man pages form /usr/share/man, they are .gz.
After I unzip them and open with less, texteidtor, ultraeditor, all the formate are weird.
Is there any tool could open them with the right formate as man does?
I know the man in linux uses the tool "less" to read man pages. How about mac???

I use Bwana. Copy all and paste into TextEdit. Then, save it. This is the beginning for diskutil:
diskutil(8)               BSD System Manager's Manual              diskutil(8)
NAME
     diskutil -- Modify, verify and repair local disks.
SYNOPSIS
     diskutil [quiet] verb [options]
DESCRIPTION
     diskutil manipulates the volume-level structure of local disks. It pro-
     vides information about, and allows the administration of, the partition-
     ing scheme of disks, optical discs, and AppleRAID sets.
VERBS
     Each verb is listed with its description and individual arguments.
     list [-plist | device]
                List disks. If no argument is given, then all disks and all
                of their partitions are listed.
                If -plist is specified, then a property list will be emitted
                instead of the normal user-readable output. If a device is
                specified, then instead of listing all families of whole disks
                and their partitions, only one such family is listed. In that
                case, specifying either the whole disk or any of its slices
                will work. The -plist and device arguments may not both be
                specified at the same time.

How to export All computer list with operating system from AD and all attributes like disable or enable and OU location also?

how to export All computer list with operating system from AD and all attributes like disable or enable and OU location also?
I have tried with dsquery below but status is not showing there.
dsquery * -filter "(objectCategory=computer)" -attr name operatingSystem

last logon user name - not really stored (or lined) with computer object. However, you can get this info during the logon process or from the computer. Here is method:
http://portal.sivarajan.com/2010/07/user-profile-and-os-info-powershell.html
Santhosh Sivarajan | Houston, TX | www.sivarajan.com
ITIL,MCITP,MCTS,MCSE (W2K3/W2K/NT4),MCSA(W2K3/W2K/MSG),Network+,CCNA
Windows Server 2012 Book - Migrating from 2008 to Windows Server 2012
Blogs: Blogs
Twitter: Twitter
LinkedIn: LinkedIn
Facebook: Facebook
Microsoft Virtual Academy:
Microsoft Virtual Academy
This posting is provided AS IS with no warranties, and confers no rights.

How to export all the views in one schema?

Hi,
I have more than 1000 views in one shcema.
How to export all the views in one schema?
Amy

Hi,
It's not a very easy question, I have develop a script wich create a script to create view from old database to new database :
/* &1: Oracle SID Source
/* &2: Oracle Schema Source
SET HEAD OFF
SET VERIFY OFF
SET PAGESIZE 0
SET LONG 40000000
SET LONGCHUNKSIZE 2000
SET LINESIZE 2000
SET FEEDBACK OFF
CREATE TABLE RECREATE_VIEW(VIEW_NAME VARCHAR2(30), TEXT LONG);
/* Selection du texte de la vue */
DECLARE
w_text long;
w_text_debut long;
w_text_column long;
w_view varchar2 (30);
w_schema varchar2 (8):='&2';
CURSOR w_cursor IS
SELECT a.view_name, a.text
FROM dba_views a
WHERE a.owner = w_schema;
CURSOR w_column IS
SELECT DECODE (ROWNUM,
1, 'CREATE OR REPLACE FORCE VIEW ' || '&' || '1..'
|| a.table_name || chr(10)
|| '('
|| a.column_name
|| DECODE (ROWNUM, nbcolumns, ')' || chr(10) || 'AS' || chr(10), ',' || chr(10))
FROM (select column_name,table_name
FROM dba_tab_columns
WHERE owner = '&1'
AND table_name = w_view
order by column_id ) a,
(SELECT COUNT (1) nbcolumns
FROM dba_tab_columns
WHERE owner = '&1'
AND table_name = w_view
GROUP BY owner, table_name) b
order by rownum;
BEGIN
OPEN w_cursor;
LOOP
FETCH w_cursor INTO w_view, w_text;
EXIT WHEN w_cursor%NOTFOUND;
w_text_debut := NULL;
w_text_column := NULL;
OPEN w_column;
LOOP
FETCH w_column INTO w_text_column;
EXIT WHEN w_column%NOTFOUND;
w_text_debut := w_text_debut || w_text_column || ' ';
w_text_column := NULL;
END LOOP;
CLOSE w_column;
w_text := w_text_debut||w_text||';';
insert into RECREATE_VIEW(VIEW_NAME, TEXT) VALUES (w_view, w_text);
COMMIT;
w_text := NULL;
w_view := NULL;
END LOOP;
CLOSE w_cursor;
END;
SPOOL scripts_views_&1..sql
PROMPT SPOOL scripts_views_&1..log
PROMPT
SELECT TEXT
FROM RECREATE_VIEW;
PROMPT
PROMPT SPOOL OFF
PROMPT
SPOOL off
PROMPT /* Formattage du fichier SQL */
!sed 's/[ ]*$//' scripts_views_&1..sql > aprilia.tmp
!rm scripts_views_&1..sql
!mv aprilia.tmp scripts_views_&1..sql
DROP TABLE RECREATE_VIEW;
EXIT
I hope that help you.
Nicolas.

ST03 Export: How to export all instances and task types?

I am exporting ST03 data using SAP GUI
I can export data for a single task type and a single instance.Is there a way I can export the Time Profile data for all instances and all task types in a single export? Can I do a single export rather than NxM exports?
Also, when I export to a text file, there is a header that reports the instance, data, and task type. When I export to excel file I only get the table, not the header info. Is there a way to to get the header info into the excel export?
Is this the appropriate forum for these questions?
Any help is appreciated.
Thanks.
Tim

I moved this question to an ABAP forum. Here's the [thread|ST03 Export: How to export all instances and task types?;.
Tim

Characteristic 0DOC_NUMBER is available in M version but not in D

Hi,
While installing cube Sales overview - 0SD_C03 in simulate mode, the system is throwing following error :
'Characteristic 0DOC_NUMBER is available in M version but not in D'. This error is shown for other objects also like .
so pls let me know . how to resolve

Txs for ur reply.
i did the same before
and i tried doing it again and again. but the same problem..
its already active.
still the same problem when i do the installation for cube

How to export ALL my contact groups ( 20) from Outlook 2010 on one machine to Outlook 2010 on two other machines

My problem is how to export ALL my contact groups (>20) from Outlook 2010 on one machine (finally established with great pains from a more user-friendly client) to Outlook 2010 on two other computers. All the help files I've seen refer to
export/import of only a single Group.
Outlook seems to be an extraordinarily limited and user-hostile environment for managing an address book. By way of comparison, the Mulberry client I've been using for years (which is no longer supported) run circles around Outlook for ease of
handling -- everything in the address book, groups and individual, can be exported and imported in a single file. My computer support staff have warned me about the difficulties of handling groups in Outlook. Is Microsoft really that incompetent,
or just sadistic ?
Thanks for your help with this.

After a lot of screwing around I finally hit on a solution, which is to export and import contacts using a .pst file (which transfers both individuals and groups) rather than a .csv file -- which transfers only individual contacts but leaves groups untouched.
Why isn't there a clear and simple message from Microsoft saying this in all the so-called Help files on moving contacts in Outlook?

Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder., Is there

Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder., Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder.

Bridge will do the job. View > Sort > ByType. Then you can choose a group of one type and put the files in a separate folder.

I change my Pc and don't found my Original DVD from my Acrobat 9 STANDARD. I have the Key and found in Internet the Pro Version, but not the Standard Version. Where can i download the Standard Version?

I change my Pc and don't found my Original DVD from my Acrobat 9 STANDARD. I have the Key and found in Internet the Pro Version, but not the Standard Version. Where can i download the Standard Version?

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'.

I have a pdf file, how do it ONLY View but not can get changed, I mean locked

I have a pdf file, how do it ONLY View but not can get changed, I mean locked?

Use the Security tab in the properties of the document.

How to export all versions but not masters?

Similar Messages

Maybe you are looking for