How to export and import dependent tables from 2 different schema

I have a setup where schema1 has table 1 and schema 2 has table2. And table 1 from schema1 depends upon table 2 from schema 2.
I would like to export and import these tables only and not any other tables from these 2 schemas with all information like grants,constraints.
Also will there be same method for Oracle 10g R1,R2 and Oracle 11G.
http://download.oracle.com/docs/cd/B12037_01/server.101/b10825/dp_export.htm#i1007514
Looking at this For table mode it says
Also, as in schema exports, cross-schema references are not exported
Not sure what this means.
As I am interested in only 2 tables I think I need to use table mode. But if I try to run export with both tables names, it says table mode support only one schema at a time. Not sure then How would the constraints would get exported in that case.
-Rohit

worked for my 1st time I tried
exp file=table2.dmp tables="dbadmin.temp1,scott.emp"
Export: Release 10.2.0.1.0 - Production on Mon Mar 1 16:32:07 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Username: / as sysdba
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
server uses WE8ISO8859P1 character set (possible charset conversion)
About to export specified tables via Conventional Path ...
Current user changed to DBADMIN
. . exporting table TEMP1 10 rows exported
EXP-00091: Exporting questionable statistics.
Current user changed to SCOTT
. . exporting table EMP 14 rows exported
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
Export terminated successfully with warnings.

Similar Messages

How to export and import Guide Procedure from one portal to another portal

Hi all,
I have accomplished a Guide Procedure on one portal, but I want to export this Guide Procedure and import it to another portal, please tell me what can I do?
Best regards & Thanks!

Sam,
Did you get to check this help document yet.
http://help.sap.com/saphelp_nw70/helpdata/EN/69/31d0cdb7094d00aa11f935221fb5bf/frameset.htm
Hope this helps.
Good Luck!
Sandeep Tudumu

How to export and import signatures for addon Signature Auto Paste Prefill Fourms?

Working with TB 24.7.0 and add-on Signature Auto Paste Prefill Fourms 4.2. I want to copy (export) the signatures to another computer where I want to import them. The developer of the add-on was not able to help me. The export function gives you three choices of format. The import function does NOT work.
Can anyone provide detailed instructions on how to export and import the signatures from one computer to another? I am using windows XP.
Bob Ptaker

If the add-on author is unable to assist you, what hope do us mere mortals have

How row migration get eliminated by export and import the table.

Hi ,
Please let me know,how row migration get eliminated by export and import the table.
Another method,deleting migrated rows and inserting those rows from copied table,
i think the concept behind this method is,inserting these rows into new block.
pls correct me if i am wrong.
Thanks,
Kumar.

Hi!
You can also use ALTER TABLE MOVE command, or if you are on 9i you can use DBMS_REDEFINITION package.
If you have a maintainance window the easiest way would be to use alter table move.
Regards,
PP

How to export and import from AIX to solaris a whole schema with different

how to export and import from AIX to solaris a whole schema with different character set
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses WE8ISO8859P1 character set (possible charset conversion)
Import terminated successfully with warnings.

The conversion between the character sets on the two servers are handled automatically. Export from one server will export the data given the character set defined on that server. Import into another server will import the data given the character set defined on that server, performing a conversion if necessary. This can be a problem when going from single-byte to a multi-byte character set. In your case, the warning is simply for your information, shoule be no real problem given the character sets you're using.
For more info...check out (pertains to 9i):
Export
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96652/ch01.htm#1006791
Character Ste Migration
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96529/ch10.htm#1656
HTH

How to export and import database from command line?

I am trying to export my old database into new server.
However, I want to export and import that database from command line.
Is it possible?
Thanks.
SZ

I used this command
exp username/password@database full=y
my export log file is as follwing:
Connected to: Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
With the Partitioning and Java options
PL/SQL Release 8.1.5.0.0 - Production
EXP-00037: Export views not compatible with database version
EXP-00000: Export terminated unsuccessfully

Export and Import of table

Dears,
I need to export two tables from PRD and import to QAS.
Size of table is 1 GB and 3 GB.
Please confirm:
1--Do i need any downtime for export and import of table
2- How much time will it take in this export process.
Please suggest.
Shivam

I cannot tell you how much time it will take. are you still using Pentium 3 processors? are you on 4 quad-core CPU? are you on IDE disk? SATA disks? on a fast and big powerful SAN?
This being said, I would say roughly 10 minutes. but as you understand, this is just a wild guess.
for downtime, you did not tell us the table names. This being said, try to export on a low usage period.

Exporting and importing just table definitions

Hi,
I have this production database that has a huge amount of data in it. I was asked to set up a test database based on the exact same schema as the live database. When I tried to do an export (from live) and import (to test), with the parameters rows=N and compress=y, the target (test database) data file will still grow enormously, presumably because of the huge number of extents already allocated to the table in the live database. My test database of course, has a limited hard-disk space.
Is there a way to export and import the table definitions without having the target database experiencing a huge growth in the size of the tablespace?
Thanks,
Chris.

If an export with compress=n is still creating initial extents that a too large, you can still build with the import file but it will take a little work.
run imp with indexfile=somefile.sql
when imp is finished, edit somefile.sql by:
1. remove all the REM statements.
2. remove all the storage clauses (tables and indexes)
Make sure your tablespaces have a small (say 1k) default initial extent.
run imp again with rows=n
All your tables and indexes will be created with the default tablespace initial extent.

How to Export and Import the schemas

How can i export & import the schema's ? pls give me some example on how to do it.
Could anyone pls show the commands to retrieve the Tablespace information... i mean what its initial size.. and how much of space has been used...
ur reply is very much appreciated
regards
Muraly

user11136977 wrote:
Hi all,
i am trying to export / import, need to know the commands
=>how to export and import full schemas from 1 user to another
=>how to export and import database
=>how to export the tablespaces
RegardsNo version, must be 10g then.
All you asked and much more in the Utilities guide.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/exp_imp.htm#i1023560
HTH
Aman....

How to export and import the Portal Components

Hi,
I had developed few components like (Forms, Reports, Frames etc.,) in Oracle Portal release 2. Now, I need to make available all the components on my Client's machine. I like to know how to export and import these components.
If any can help in this, it will be a great help for me...
Thanks in Advance...

The migration of any Portal DB provider components, has the following steps.
Assume that you are migrating a form component form_X.
1) Click the export link of the form_x.
(this will take you to create transport screen).
2) Specify a name of the transport set which you are going to create. (eg., "My form_X transportset")
(Since the objects are migrated using a container which is in other words called as 'Transport Set').
3) In that select the export now button.
(this will mark your form component form_X for export).
4) Verify that the status of the transport is 'Extract Complete'
(check with the browse transport screen in Export/Import Portlet under Admin tab).
5) Now, the object information is extracted into transport set tables used by Portal Export/Import Utility.
6) Go to that particular transport set, (browse transport) and download the script available.
7) That script will lead you to various steps,
(create a dump ).
8) In the target instance, import that dump using the same script again.
9) Merge the contents of the dump (form_X information) into any of the application.
(Import option => in the export/import portlet under admin tab).
10) Verify that the status of the transport set is 'Merge Complete'.
Now, the object is migrated and ready for use.
(Here are explaining the export/import process in detail.
You can refer the export/import manuals.
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/INTERNALPRODDEVFOLDER/TECHREADINESS/CM_PUBLISHING/EXPIMP/EXPORT_IMPORT_LOB0.PPT

How to export and import Portal Components

Hi,
I had developed few components like (Forms, Reports, Frames etc.,) in Oracle Portal release 2. Now, I need to make available all the components on my Client's machine. I like to know how to export and import these components.
If any can help in this, it will be a great help for me...
Thanks in Advance...
Sudheer

Hi,
I had developed few components like (Forms, Reports, Frames etc.,) in Oracle Portal release 2. Now, I need to make available all the components on my Client's machine. I like to know how to export and import these components.
If any can help in this, it will be a great help for me...
Thanks in Advance...
Sudheer Hi Ravikanti,
Here are two things you can do to get started.. In 9iAS Release 2, Export/Import functionality is provided via a set of export/import utilities included with 9iAS Portal.
1) If you have not had the opportunity yet, a good place to start is to download and review the Oracle9iAS Portal 9.0.2.2 Export/Import FAQ posted on portalcenter.oracle.com.
Here is the URL for the Portal 9.0.2.2 Export/Import FAQ:
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/DEPLOY_PERFORM/EXPORT_IMPORT_FAQ_1127.HTM
2) For official documentation on Portal 9.0.2 Export/Import, refer to the Task Help in the Online Documentation for Portal Import/Export (accessible from the question mark help icon within the "Browse Transport Sets" wizard.)
Best Regards,
Harry

How to export and import template and dimensions mumbers between 2 appset

hi expert:
      1.How to export and import template and dimensions mumbers between two application set
      2. In Our project Requirement ,
          we moust be develop our planning in develop evn application set , distribute template and
          dimension mumbers to another Qas applications set .
     3. how can i   package our template in dev application set and Anti-package to Qas application set
         with BPC system tools?
     4. This Requirement is from our Security control Dep. we must be change template version or dimension
          mumber with system tools.
     5.thanks for your help!

Ian,
So, in other words, you're saying that it's not possible to export directly objects (like smart albums) that reside outside of projects?
I know, for example, you can "export" anything created inside a folder by dragging and dropping the folder to another library; but you then have to rebuild the library to get the new folder and its contents to be recognized. For my library, this takes too much time to do.

How to export and import the lsmw

Hi Friends,
How to export and import the objects in lsmw
from dev to qas(quality) systems........
its urgent.........
regards,
venu.

best way is to create a transport and move it to other enviroments
There are two ways of Transporting for this. Can choose any one.
Goto the LSMW Transaction
1)Extras>Export Projects>(Give the Project name)
In next screen(Choose what subproject, routines, etc.. you wan to copy then, Export Rules-->Export((Will prompt for file name)
A text file will be downloaded.
In the Target System
Goto LSMW Extras-->Import Projects and give the text file which was downloaded.
2)Extras-->Generate Change Request
Assign a change request which is basically a transport request and you can then get this transported from one system to another through the basis route.

How to export and import reports and presentations?

Hi Guys,
how to export and import reports and presentations from Analyzer 7.2 to Web Analysis 11.1.1.
Can you plz tell me the procedure.
Thanks

Hi,
Like I mentioned earlier, you can export documents and presentations to local computers and/or mapped drives.
- Exported documents take ARD extension & presentations take APT extension.
To export the current document, select File, then Export, then Current Document. In the Save dialog box, indicate your local drive/network location to which the file is to be saved and click OK.
I believe- Analyzer 7.2 also has the wizard to let you Export docs. & Presentations.
- Natesh

How to export and import on another computer whole database connection

Hi
how to export and import on another computer whole database connection with all contents ?
step by step

From the "source" computer do this:
1) Open SQLDeveloper.
2) Right click on the main connections node and choose export connections.
3) Select the connections you want exported and choose a file name and location to save them.
4) Save the file by clicking OK then copy it to the destination PC.
On the "destination" PC assuming you have already installed SQLDeveloper do this:
1) Open SQLDeveloper.
2) Right click on the main connections node and choose import connections.
3) Browse to the connections file you copied earlier and select the connection you saved.
4) Complete the import by clicking OK and you are done.
Mind that this is sufficient only if you have only basic connections, if you have TNS connections you will also need to manually copy the Tnsnames file from the "source" PC to the "destination" PC and set the
Tools -> Preferences -> Database -> Advanced Tnsnames directory
to the directory where you copied the Tnsnames file.

How to export and import dependent tables from 2 different schema

Similar Messages

Maybe you are looking for