How to export and import from AIX to solaris a whole schema with different

how to export and import from AIX to solaris a whole schema with different character set
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses WE8ISO8859P1 character set (possible charset conversion)
Import terminated successfully with warnings.

The conversion between the character sets on the two servers are handled automatically. Export from one server will export the data given the character set defined on that server. Import into another server will import the data given the character set defined on that server, performing a conversion if necessary. This can be a problem when going from single-byte to a multi-byte character set. In your case, the warning is simply for your information, shoule be no real problem given the character sets you're using.
For more info...check out (pertains to 9i):
Export
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96652/ch01.htm#1006791
Character Ste Migration
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96529/ch10.htm#1656
HTH

Similar Messages

  • How to export and import signatures for addon Signature Auto Paste Prefill Fourms?

    Working with TB 24.7.0 and add-on Signature Auto Paste Prefill Fourms 4.2. I want to copy (export) the signatures to another computer where I want to import them. The developer of the add-on was not able to help me. The export function gives you three choices of format. The import function does NOT work.
    Can anyone provide detailed instructions on how to export and import the signatures from one computer to another? I am using windows XP.
    Bob Ptaker

    If the add-on author is unable to assist you, what hope do us mere mortals have

  • How to Export and Import the schemas

    How can i export & import the schema's ? pls give me some example on how to do it.
    Could anyone pls show the commands to retrieve the Tablespace information... i mean what its initial size.. and how much of space has been used...
    ur reply is very much appreciated
    regards
    Muraly

    user11136977 wrote:
    Hi all,
    i am trying to export / import, need to know the commands
    =>how to export and import full schemas from 1 user to another
    =>how to export and import database
    =>how to export the tablespaces
    RegardsNo version, must be 10g then.
    All you asked and much more in the Utilities guide.
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/exp_imp.htm#i1023560
    HTH
    Aman....

  • How to export and import Portal Components

    Hi,
    I had developed few components like (Forms, Reports, Frames etc.,) in Oracle Portal release 2. Now, I need to make available all the components on my Client's machine. I like to know how to export and import these components.
    If any can help in this, it will be a great help for me...
    Thanks in Advance...
    Sudheer

    Hi,
    I had developed few components like (Forms, Reports, Frames etc.,) in Oracle Portal release 2. Now, I need to make available all the components on my Client's machine. I like to know how to export and import these components.
    If any can help in this, it will be a great help for me...
    Thanks in Advance...
    Sudheer Hi Ravikanti,
    Here are two things you can do to get started.. In 9iAS Release 2, Export/Import functionality is provided via a set of export/import utilities included with 9iAS Portal.
    1) If you have not had the opportunity yet, a good place to start is to download and review the Oracle9iAS Portal 9.0.2.2 Export/Import FAQ posted on portalcenter.oracle.com.
    Here is the URL for the Portal 9.0.2.2 Export/Import FAQ:
    http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/DEPLOY_PERFORM/EXPORT_IMPORT_FAQ_1127.HTM
    2) For official documentation on Portal 9.0.2 Export/Import, refer to the Task Help in the Online Documentation for Portal Import/Export (accessible from the question mark help icon within the "Browse Transport Sets" wizard.)
    Best Regards,
    Harry

  • How to export and import template and dimensions mumbers between 2 appset

    hi expert:
          1.How to export and import template and dimensions mumbers between two application set
          2. In Our project Requirement ,
              we moust be  develop our planning in develop evn application set , distribute template and
              dimension mumbers to another  Qas applications set .
         3. how can  i   package our template in dev application set  and Anti-package to Qas application set
             with BPC  system tools?
         4. This  Requirement  is  from  our Security control Dep. we must be change template version or dimension
              mumber with system tools.
         5.thanks for your help!

    Ian,
    So, in other words, you're saying that it's not possible to export directly objects (like smart albums) that reside outside of projects?
    I know, for example, you can "export" anything created inside a folder by dragging and dropping the folder to another library; but you then have to rebuild the library to get the new folder and its contents to be recognized. For my library, this takes too much time to do.

  • How to export and import the lsmw

    Hi Friends,
    How to export and import the objects in lsmw
    from dev to qas(quality) systems........
    its urgent.........
    regards,
    venu.

    best way is to create a transport and move it to other enviroments
    There are two ways of Transporting for this. Can choose any one.
    Goto the LSMW Transaction
    1)Extras>Export Projects>(Give the Project name)
    In next screen(Choose what subproject, routines, etc.. you wan to copy then, Export Rules-->Export((Will prompt for file name)
    A text file will be downloaded.
    In the Target System
    Goto LSMW Extras-->Import Projects and give the text file which was downloaded.
    2)Extras-->Generate Change Request
    Assign a change request which is basically a transport request and you can then get this transported from one system to another through the basis route.

  • How to export and import reports and presentations?

    Hi Guys,
    how to export and import reports and presentations from Analyzer 7.2 to Web Analysis 11.1.1.
    Can you plz tell me the procedure.
    Thanks

    Hi,
    Like I mentioned earlier, you can export documents and presentations to local computers and/or mapped drives.
    - Exported documents take ARD extension & presentations take APT extension.
    To export the current document, select File, then Export, then Current Document. In the Save dialog box, indicate your local drive/network location to which the file is to be saved and click OK.
    I believe- Analyzer 7.2 also has the wizard to let you Export docs. & Presentations.
    - Natesh

  • How to export and import on another computer whole database connection

    Hi
    how to export and import on another computer whole database connection with all contents ?
    step by step

    From the "source" computer do this:
    1) Open SQLDeveloper.
    2) Right click on the main connections node and choose export connections.
    3) Select the connections you want exported and choose a file name and location to save them.
    4) Save the file by clicking OK then copy it to the destination PC.
    On the "destination" PC assuming you have already installed SQLDeveloper do this:
    1) Open SQLDeveloper.
    2) Right click on the main connections node and choose import connections.
    3) Browse to the connections file you copied earlier and select the connection you saved.
    4) Complete the import by clicking OK and you are done.
    Mind that this is sufficient only if you have only basic connections, if you have TNS connections you will also need to manually copy the Tnsnames file from the "source" PC to the "destination" PC and set the
    Tools -> Preferences -> Database -> Advanced Tnsnames directory
    to the directory where you copied the Tnsnames file.

  • How to export and import the Portal Components

    Hi,
    I had developed few components like (Forms, Reports, Frames etc.,) in Oracle Portal release 2. Now, I need to make available all the components on my Client's machine. I like to know how to export and import these components.
    If any can help in this, it will be a great help for me...
    Thanks in Advance...

    The migration of any Portal DB provider components, has the following steps.
    Assume that you are migrating a form component form_X.
    1) Click the export link of the form_x.
    (this will take you to create transport screen).
    2) Specify a name of the transport set which you are going to create. (eg., "My form_X transportset")
    (Since the objects are migrated using a container which is in other words called as 'Transport Set').
    3) In that select the export now button.
    (this will mark your form component form_X for export).
    4) Verify that the status of the transport is 'Extract Complete'
    (check with the browse transport screen in Export/Import Portlet under Admin tab).
    5) Now, the object information is extracted into transport set tables used by Portal Export/Import Utility.
    6) Go to that particular transport set, (browse transport) and download the script available.
    7) That script will lead you to various steps,
    (create a dump ).
    8) In the target instance, import that dump using the same script again.
    9) Merge the contents of the dump (form_X information) into any of the application.
    (Import option => in the export/import portlet under admin tab).
    10) Verify that the status of the transport set is 'Merge Complete'.
    Now, the object is migrated and ready for use.
    (Here are explaining the export/import process in detail.
    You can refer the export/import manuals.
    http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/INTERNALPRODDEVFOLDER/TECHREADINESS/CM_PUBLISHING/EXPIMP/EXPORT_IMPORT_LOB0.PPT

  • How can I transfer contacts from one iPad to a new iPad with different iCloud addresses?

    how can I transfer contacts from one iPad to a new iPad with different iCloud addresses?

    One way would be to e-mail them from yourself to yourself. That would totally avoid the different ID issue.

  • How to export and import dependent tables from 2 different schema

    I have a setup where schema1 has table 1 and schema 2 has table2. And table 1 from schema1 depends upon table 2 from schema 2.
    I would like to export and import these tables only and not any other tables from these 2 schemas with all information like grants,constraints.
    Also will there be same method for Oracle 10g R1,R2 and Oracle 11G.
    http://download.oracle.com/docs/cd/B12037_01/server.101/b10825/dp_export.htm#i1007514
    Looking at this For table mode it says
    Also, as in schema exports, cross-schema references are not exported
    Not sure what this means.
    As I am interested in only 2 tables I think I need to use table mode. But if I try to run export with both tables names, it says table mode support only one schema at a time. Not sure then How would the constraints would get exported in that case.
    -Rohit

    worked for my 1st time I tried
    exp file=table2.dmp tables="dbadmin.temp1,scott.emp"
    Export: Release 10.2.0.1.0 - Production on Mon Mar 1 16:32:07 2010
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Username: / as sysdba
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    Export done in US7ASCII character set and AL16UTF16 NCHAR character set
    server uses WE8ISO8859P1 character set (possible charset conversion)
    About to export specified tables via Conventional Path ...
    Current user changed to DBADMIN
    . . exporting table                          TEMP1         10 rows exported
    EXP-00091: Exporting questionable statistics.
    Current user changed to SCOTT
    . . exporting table                            EMP         14 rows exported
    EXP-00091: Exporting questionable statistics.
    EXP-00091: Exporting questionable statistics.
    Export terminated successfully with warnings.

  • How to export and import database from command line?

    I am trying to export my old database into new server.
    However, I want to export and import that database from command line.
    Is it possible?
    Thanks.
    SZ

    I used this command
    exp username/password@database full=y
    my export log file is as follwing:
    Connected to: Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
    With the Partitioning and Java options
    PL/SQL Release 8.1.5.0.0 - Production
    EXP-00037: Export views not compatible with database version
    EXP-00000: Export terminated unsuccessfully

  • How to export and import database from one laptop to another?

    hi,
    plz anyone help me to export and import one of my user in the database to another laptop.....
    i hav absoulutely no knowledge in doing this, plz some one help to do it from scrap...
    thanks in advance for ur kind help

    what's the oracle version on Source and Target Database release version? Take a look at the below links.
    [http://wiki.oracle.com/page/Oracle+export+and+import+]
    [Import_Export_FAQ|http://www.orafaq.com/wiki/Import_Export_FAQ]
    Export
    [Oracle Export Utility|http://www.psoug.org/reference/export.html]
    [Oracle Import Utility|http://www.psoug.org/reference/import.html]
    HTH
    Anantha

  • How to export and import complete organization structure?

    Hello,
    I wanna import many (maybe 300) organization XML ObjectGroups in the right order.
    I tried something like that (see the code below),... but this solution only works for one file.
    <?xml version='1.0' encoding='UTF-8'?>
    <!DOCTYPE Waveset PUBLIC 'waveset.dtd' 'waveset.dtd'>
    <Waveset>
    <ImportCommand name='include' file='c:/import/org001.xml'/>
    <ImportCommand name='include' file='c:/import/org0011.xml'/>
    <ImportCommand name='include' file='c:/import/org002.xml'/>
    </Waveset>I tried to use wildcards like *,%,... the result is an error message :(
    e.g.
    file='import/org001*.xml'/>Has anyone experiences with that case?
    There are an another way to export and import complete organization structure in IDM 8.x ?
    greets and thx

    Hi, Since you are using an program to transform the org structure to XML file,
    why not write another program, just to generate the including list?
    Then import from the file?
    PS: How to generate the organization xml?
    Some file looks like the following? But how to generate those IDs of its parent is a problem...
    <?xml version='1.0' encoding='UTF-8'?>
    <!DOCTYPE ObjectGroup PUBLIC 'waveset.dtd' 'waveset.dtd'>
    <!-- MemberObjectGroups="#ID#Top" displayName="test4" name="096242075B658F30:4D058C8A:12181263D1D:-79e7"-->
    <ObjectGroup name='096242075B658F30:4D058C8A:12181263D1D:-79e7' displayName='test4' creator='Configurator' createDate='1243497029859' lastModifier='Configurator' lastModDate='1243497029859' primaryObjectClass='ObjectGroup'>
    <PathFromTop>
    <List>
    <String>#ID#Top</String>
    <String>#ID#E706-:F4B18168121:1AE80FB6:03F856B570242690</String>
    </List>
    </PathFromTop>
    <MemberObjectGroups>
    <ObjectRef type='ObjectGroup' id='#ID#Top' name='Top'/>
    </MemberObjectGroups>
    </ObjectGroup>

  • How to export and import "Computer Groups" and "Patch approvals" in WSUS 4.0 ?

    Hi,
    I have a query regarding the export and import options for "Computer Groups" and "Patch Approvals" in WSUS 4.0.
    In WSUS 3.2 once we install WSUS 3.0 API Samples and Tools, we get "WSUSMigrationExport" and "WSUSMigrationImport" tools under
    C:\Program Files\Update Services 3.0 API Samples and Tools\WsusMigrate\ folder. 
    Using the 'WSUSMigrationExport' tool we can export the Computer Groups and the Patch Approvals in a XML file. And using the 'WSUSMigrationImport' tool we can import the 'Computer Groups' and the 'Patch Approvals' from that XML file into a different WSUS
    3.2 server. We can run the import tool as below:
    a. Run command prompt as administrator.
    b. In the command prompt, go to C:\Program Files (x86)\Update Services 3.0 API Samples ans Tools\ WsusMigrate\WsusMigrationImport
    c. Type WsusMigrationImport filename.xml TargetGroups None. Press enter; this will import Computer Groups to the WSUS 3.2 server.
       Type WsusMigrationImport filename.xml Approvals None. Press enter; this will import "Patch Approvals" to the WSUS 3.2 server.
    This is easy and useful.
    Now, for WSUS 4.0 I did not find  "WSUS
    4.0 API Samples and Tools". So I installed "WSUS 3.0 API Samples and Tools" in my WSUS 4.0 server. And tried to import a valid XML file in the above mentioned process. But the command returned an error.
    The error says the "Microsoft.UpdateService.Administration.dll" file was not found.
    I further searched in the internet about this issue and I found that the "WSUS 3.0 API Samples and Tools" is not supported in WSUS 4.0 as the .net framework used in "WSUS 3.0 API Samples and Tools" is 2.0 and WSUS 4.0 uses .net Framework
    4.5.
    So, Here are my questions.
    1. Is it correct that "WSUS 3.0 API Samples and Tools" is not supported in WSUS 4.0?
    2. Is "WSUS 4.0 API Samples and Tools" available?
    3. Is there any alternative way in WSUS 4.0 to export and import XML file consisting "Computer Groups" and "Patch Approvals" configurations?
    I need an urgent reply. Thank you in advance.

    Hi Tapojyoti,
    >>1. Is it correct that "WSUS 3.0 API Samples and Tools" is not supported in WSUS 4.0?
    Yes, WSUS 3.0 API Samples and Tools is not supported in Windows Server 2012R2 by default. We may try to rebuild it in Windows Server 2012R2. For detailed information about how the rebuiled, please refer to the readme document of the WSUS 3.0 API Samples
    and Tools.
    >>2. Is "WSUS 4.0 API Samples and Tools" available?
    No, I can't find the WSUS API Samples and Tools for 2012R2.
    >>3. Is there any alternative way in WSUS 4.0 to export and import XML file consisting "Computer Groups" and "Patch Approvals" configurations?
    As I have mentioned above, due to WSUS 3.0 API Samples and Tools is released with source code, we can try to rebuild it in the Windows Server 2012R2.
    If it doesn't work, as a workaround, we can configure the new WSUS server as the replica server of the existing WSUS server. After the synchronization, change the server mode to stand alone.
    Best Regards.
    Steven Lee
    TechNet Community Support

Maybe you are looking for