How to export at 72 DPI, rather than 71.98 DPI

Hi all,
CS5, OS X 10.6.4
Australia (system set to metric measurements)
Images being exported from FW here have a 71.98 DPI resolution despite Document Image Size having Resolution set to 72DPI exactly.
Any tips, workarounds?

I like Jim's answer on this—i.e., a pixel is a pixel. If an application is attempting to render the image based on ppi (or dpi) information, then it's really performing a sort of previewing, or sizing simulation. And I'd look to see if that feature can be turned off.
Mac's Preview application has long offered this option, under various names, and it can be turned on or off within Preferences. Here's how that preference appears in OS 10.6. It's the bottom option, "Size on screen equals size on printout", that accounts for pixel density in its image rendering. For example, an image set to 72 ppi will suddenly increase in size (on a typical screen) when this option is chosen.
Speaking of Preview, it includes an option to adjust Resolution under the Tools > Adjust Size command. (I believe you'd want to deselect "Resample Image" before making any adjustments in this dialog.) If Fireworks is letting you down, perhaps this option could help you out in a pinch.
It might be helpful here to know what application is providing you with the specific dpi information and/or what application is "receiving" these graphics. If the saved graphic is reopened in Fireworks, does Fireworks still indicate 72dpi? Is it simply rounding up? Does dpi fluctuate slightly between graphics of different pixel dimensions?
Finally, if the metric system is somehow an issue here, have you tried using metric sizing instead? (Following is the Modify > Canvas > Image Size... dialog within Fireworks 8, with 72ppi being converted to 28.346 pixels/cm.)

Similar Messages

How do I download a PDF rather than viewing it in Safari?

How do I download a PDF rather than viewing it in Safari?
Version 5.1.3

I believe you can save it after it is viewed in Safari.
Barry

How to get the actual value rather than pixel value in vision assistant

how to get the actual value rather than pixel value by vision assistant in my program.As shown in the figure this is my programme this is the result But i want to get this result

Check the documentation for the "ADF Dialog Framework"
It may help
Atilio

How do I restore from iCloud rather than from backup point from six months ago?

how do I restore from iCloud rather than from a backup point from six months ago? on iTunes I don't see the option to select. can I restore and see this option directly from the iPhone?

Welcome to the Apple Community.
iCloud BackUp and Restore

How do i delete a letter rather than backspace

how do i delete a letter rather than backspace

If you touch the end of the word, you get a magnified "bubble" that you can drag to the right edge of the character you want to replace, then one backspace deletes it and you type the correction. For straight typing ,it's easier just to use the delete key, but I sometimes use the bubble method when typing Latin, because I must enter a lot of long vowel signs that are a pain to retype.

IPhoto 11 exporting reverts to original rather than edited

I am using iPhoto 11 ver. 9.2.2. When I edit my photos, and then export, the resulting jpg has reverted to the original rather than the edited version. I have tried deleting my user preference file, resarting, all to no avail. I want the exported file to be the edited photo.

How are you exporting?
If using File -> Export, make sure the Kind is set to anything except 'Original'
Assuming that's the case:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

How to specify application by extension rather than mime type (e.g., docx as word, not xml)

When I try to open a link to a file.docx or file.xlsx, FF sees it as an xml file and wants to open it in my default xml application. I can select Word or Excel (I have Office 2010 installed), but a) it doesn't remember that in the applications list, so I have to browse applications each time, or b) if I set it to always use that type, it tries to open docx in Excel or xlsx in Word, depending on last usage. How can I specify applications by file extension instead of seeing these as the same type of file?
Thanks,
Ian
FF 15.0.1, Win 7, Office 2010

I don't know if the source server sends the right mime type - it probably doesn't. In fact, now you mention it, I'm not sure I've tried this from any sites except one, which is the one giving me problems. I'll try contacting them about fixing their mime types. Assuming though that they can't or won't fix it, the question still remains - is it possible to set application by extension rather than by mime type?
Yeah, I can definitely save it and open it, just trying to take the easiest possible route for a quick view.
Thanks.

How to switch a realy once rather than repeatedly

Hi,
I am using a TB-2627 terminal block in a PXI-2527 relay multipleaxer and i am having trouble switching a relay.
In the terminal block i have a simple pos and neg which goes out to a enable button on my rig. I want to open and close this relay. I have taken part of the relay switching example but no matter what i try, when i press "close relay" rather than just staying closed it keeps openeing and closing really fast continuously.
Can anybody help me or share a bit of code that will enable me to simply keep the realy open or closed?
Kind Regards,
Kieran

Hi!
Just post your code!
I guess that switching is inside a while loop that is continuously launched...looking at your code would help!
graziano

How to export in smaller widescreen format than p720?

How can I set presets in PE7 such, that the exported video has the same hight/widh as the original?
I am shooting with KodakZi8 WVGA modus, which is 16:9 but smaller than 720p. In PE7 I only found the option to set to "widescreen" in 720p. In manual presets the height/width fields are disabled. If I export with MPEG widescreen presets, the videos are blown up to 720p and get blurry.
Appreciate hints to FAQs and former threats, too (didn't found any, though)
Niko

Video from a still cameras will likely need to be converted to a more traditional video codec before it can be successfully edited in Premiere Elements, per my books and the FAQs to the right of this forum.
http://forums.adobe.com/thread/415317?tstart=0
AVI files are likely MJPEG-AVIs, and they can be converted with Windows MovieMaker.
MOV files can be converted using Super or, better, Quicktime Pro.
Once your files have been converted to DV-AVIs, you can edit them in a project using the standard DV 16:9 project settings.

I synced with iMac itunes and got many more contacts than I want on the iPhone. How can I delete multiple contacts rather than having to do so one at a time?

I synced my iPhone with itunes and iMac and got many more contacts than I wanted on my iPhone. How can I delete quite a few of them at one time as opposed to deleting one at a time?

iTunes does not handle the import of photos/videos from the iPhone's Camera Roll.
If this is not the computer you sync your iPhone with, you should have been provided a warning message that your iPhone is associated with an iTunes library on another computer and when trying to transfer any iTunes content from a different computer, a warning message is provided indicating that all iTunes content on the iPhone will be erased first.
When connecting an iPhone to iTunes on another computer, none of the options under the various tabs for the iPhone sync preferences with iTunes are selected automatically. This means you had to select Sync Contacts under the Info tab for your iPhone sync preferences with iTunes on your wife's computer.
Assuming you are syncing contacts with a supported address book app on your computer, connect your iPhone to Tunes on your computer and without syncing, under the Info tab for your iPhone sync preferences below the Advanced section, select Contacts for replace info on this iPhone followed by a sync.
For importing photos/videos from the Camera Roll which can be done with a computer that is not used for syncing the iPhone since syncing with iTunes is not involved.
http://support.apple.com/kb/HT4083

How do I send a SMS rather than a iMessage message?

I want to send a SMS message to my mothers phone (thats not a iPhone) from my iPhone. I have my mothers e-mail and Phone number in my contacts for her. So I hit messages and select my mothers name and then type my message. Tap send, then it says delivered. Everything hunkie doorie, au contraire. The message is sent to my mothers iPod not her phone. I still what to keep the e-mail so I can face time her iPod but I still want to text her on her phone. How can I send a message as a SMS rarther than a iMessage message?
Thanks.

You might try removing your mother's email address from her contact info on your phone. If that works you could set up a different contact (misspelled or somehow different) for her email to use with facetime. I used to do this all the time to more efficiently separate home/work/cell numbers. This might be a sloppy work around, but it might work until there are different options in the settings. This is just an idea. I really have no clue if it will work. Good luck.

TS4118 ive moved from mobile me to icloud but on my iphone calendar all dates that i input are under mobile me still. obviously these dont shoe up on my mac. how do i copy them across rather than having to manually input 1 at a time

ive moved from mobile me to icloud. however on my iphone all calendar updates are still under my old mobile me account. how can i copy them all over to icloud in 1 go so that they show up on my mac calendar?

Download this
https://itunes.apple.com/gr/app/xcalendar-lite-export-import/id556510747?mt=8
To backup your Cal before you try to merge .me and .iCloud calendars.
I don't know if the .me account settings works like iCloud. In iCloud you can turn off the Calendar from settings by keeping the event in the iPhone's local account. Then you can turn ON calendar in iCloud settings and you will prompted to merge them.

How to view stills as individual rather than sequences in file browser

i have a lot of stills, which happen to be numbered, and i need to browse them
for use in motion 3. the file browser is showing them as numbered sequences.
how can i defeat that behavior so i can see each individual image for import?
thanks,
BabaG

Right down at the bottom right hand side of the File Browser, you will see two buttons. Click on the left hand one that looks like rectangles receding into the distance.
That should fix it!
Peter

How can I have firefox install rather than save new apps?

whenever I need to install any thing, Firefox gives two options to save or cancel. I need neither, I need to install without saving. how can I do that?
Thanks
Sam

Toddzilla,
There are a couple different ways to append to excel files. A couple links that might get you going are:
Can I Add New Data to an Existing Excel File Without Erasing Old Data?
Append Data to an Excel Document Every Iteration Using Report Generation Toolkit
Are you trying to write over cells B6 or B7, or are you trying to append within the cell itself?
Hopefully this can get you on the right track. When I append to files I tend to insert rows or append to the end of the file.
Scott A
SSP Product Manager
National Instruments

How to get fresh jsp 'page' rather than from cache?

Hello
I am using about 5 jsp pages. some of the jsp call other JSPs. When a jsp calls another jsp (by button clicking), the target jsp opens but it does not shown the fresh contents. I have to make it fresh by clicking the fresh botton of IE explorer. How can I get fresh jsp when it is called from another jsp? Will be grateful for any help.
I am using IE5 and tomcat4.0

You need to tell IE not to cache your pages. For IE 5 something like this should work:
<HTML>
<HEAD>
<TITLE>---</TITLE>
<META HTTP-EQUIV="Pragma" CONTENT="no-cache">
<META HTTP-EQUIV="Expires" CONTENT="-1">
</HEAD>
<BODY>
</BODY>
<HEAD>
<META HTTP-EQUIV="Pragma" CONTENT="no-cache">
<META HTTP-EQUIV="Expires" CONTENT="-1">
</HEAD>
</HTML>

How to export at 72 DPI, rather than 71.98 DPI

Similar Messages

Maybe you are looking for