How to export audio from PPro CS6/CC to AJA KiPro?

Hello everyone.
First off, let me state up front that I know all of the specs when creating a ProRes file that will playback on a KiPro.  Our shop just switched from FCP 7 to Adobe PPro, and the exports are not working, BUT I believe it's only because we don't know how to select the correct options for the export.
We can see Video, so I think we are fine on the picture side, but what I am looking for is a way to be able to get the audio codec to be these settings:
- Stereo
- Linear PCM
- 48kHz
- 24-bit
- Little Endian
I just don't know where to look for the audio settings to insure that this is really what I am exporting...  in the export media window, I have been choosing the following:
I have also tried exporting the files as "Mono", but the sound continues to either not play at all or playback with what sounds like massive distortion.
Any help is appreciated.  Thanks.
-PJ

Well, those settings will give you the first four, but the last is not a user option.  It comes out as it comes out and you can't change it.  I just don't know if it comes out as big or little.

Similar Messages

  • How do I import custom export presets from PPro CS6 to PPro CC?

    In CS6 I have a big list of custom export settings specific to the various broadcasters that I upload content to; would like to not have to rebuild them all in CC.  How can I transfer them over?  I cannot find where the custom export presets are stored in the system.  Mac OSX 10.7.5

    Here's what I did on a PC.  Should work similarly on a Mac.
    Open Adobe Media Encoder CS6.
    Select your customer preset.
    From the "Preset" menu, select "Export", and choose somewhere to temporarily save the preset file.
    In AME CC, you then need to import these files.

  • How to export video from camera to ipad

    How to export video from camera to ipad

    Pad2, the new iPad Supported Video Formats & Movie Formats
    H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
     Cheers, Tom

  • How to export photos from photo gallery to my iPad

    How to export photos from photo gallery to my iPad

    I had no trouble finding the "Export" tools in the "File" menu. They are greyed out when no photo is selected, but they are functional after selecting one or more photos.
    I agree that it would be nice to have the "Reveal in Finder" option back, but they probably don't want us mucking about inside the Photos library structure.

  • How to export photos from lap to to ipad

    how to export photos from lap top to ipad,i keep draging them in ipad devise logo,photos jump back in place.if i click on to export in i photo,it only would go to files??????help!!

    Use the photo set up in the iTunes sync
    LN

  • How to export photos from iMac to iPad and iPhone

    How to export photos from iphoto to my iPad and iPhone the easiest way.

    There are a number of methods including:
    Via iTunes and USB cable: iTunes: Syncing photos - Apple Support
    Via Photo Stream: http://support.apple.com/en-us/HT201317
    Via 3rd party app: http://www.photosync-app.com
    Via 3rd party cloud services such as Dropbox

  • How to export photos from one iPad to another

    How to export  photos from one iPad to another

    Sending the photos over WiFi might be the easiest way for you to accomplish this. The Wireless Transfer App should work. You will both have to download the app on your own devices. Read about it here.
    http://www.wirelesstransferapp.com/

  • How to export pictures from my ipad to my computer

    HOW TO EXPORT PHOTOS FROM MY IPAD ?

    How to Transfer Photos from an iPad to a Computer
    http://www.wikihow.com/Transfer-Photos-from-an-iPad-to-a-Computer
    Importing Personal Photos and videos from your iOS device to your computer.
    http://support.apple.com/kb/HT4083
    Also check out the Photo Manager Pro app.
    https://itunes.apple.com/us/app/photo-manager-pro/id393858562
     Cheers, Tom

  • How to export data from a Oracle table to a delimited file?

    I know how to load delimited file into a table, but how to export
    data from a Oracle table to a delimited file?
    Thanks in advance.

    Try looking at this link, it's long but there's three different solutions discussed in it. If you look at Barbara Boehmer's
    solution in her posts in the link below you'll see that she's addressed your concerns with spool files.
    Re: utl_smtp and triggers

  • How to export data from a spread sheet which has multiple work sheets?

    How to export data from a spread sheet which has multiple work sheets to a single text file with fixed length fields?

    Hello s1,
    saving them as CSV will not give a fixed legth output but, as the naming says, a Character Separated Value file.
    Regards
    Marcus

  • Problem when exporting audio from Premiere Pro v4.2.1 into wave 5.1 format

    Hello to Adobe experts!
    After installing of last updates for Adobe Premiere Pro (v4.2.1) and for Media Encoder (v4.2.0.006) the was a problem:
    Now I cannot to export audio from adobe sequence into uncompressed wave format with 5.1 channels settings. Source m2ts video files in sequence are with 5.1 audio.
    What I doing:
    1) in Premiere I execute "File\Export\Media"
    2) Export settings are:
    - format: Windows Waveform
    - audio codec: Ucompressed
    - basic audio settings: 44100Hz, Channels: 5.1, Sample Type 16bit
    3) After OK button it opens Adobe Media Encoder.
    4) After pressing Start Queue in Adobe Media Encoder there is a message "Error compiling movie. Unknown error"
    In earlier versions it worked fine.
    Can you help me with this problem?
    Alexander

    Here are the options, from a sequence with 5.1 master track:
    and with Surcode:
    Notice that first one does only give stereo as an option. Nothing more. With Surcode it gives you 5.1 sound.

  • How To import collections from Bridge cs6 To Bridge CC

    How To import collection from Bridge cs6 To Bridge CC??
    thx

    How To import collection from Bridge cs6 To Bridge CC??
    A collection is a bunch of aliases to the original files in their original place. If you have upgraded to CC on the same machine you can use the same collection, on a different machine it will possible not find the correct location again.
    On a Mac the path for the saved collections is : User / library/ application Support / Adobe/ BridgeCS6 / collections. Inhere are the saved collections showing the names you gave them. You can copy these collection files to the same location in Bridge CC.
    If you have a different machine you best first choose the collection and add a keyword with the name of the collection to all the files in this particular collection so you can use the find command to easily recreate the collection on your new machine.
    Maybe someone with more knowledge of Windows can show you the correct path but it should be something similar as on a Mac.

  • How to Export data from webdynpro using Jecxcel

    Hi ,
    Can anyone help me how to export data from web dynpro using Jexcel. kindly send me the related links.
    Thanks

    Hi Sandeep,
    Have you refered in the blogs?
    U can find may more document related to this.the below blog helps u in
    Exporting Data from Web Dynpro in Different Formats Using Open Source (POI, JExcel, iText) APIu2019s.
    https://www.sdn.sap.com/irj/sdn/index?rid=/library/uuid/b030e7fb-2662-2b10-0dab-c4aa52c3550b
    Regards
    Supraja

  • How to export events from iPhoto in Iphone 5 to Mac?

    How to export events from iPhoto in Iphone 5 to Mac? Thanks

    Is this waht you want to do?
    It's built into the File Export function of iPhoto 9 (11).  Select what every photos you want and use that option to put each photo in a folder with the Event title it came from as in this test of six randomly picked photos:
    OT

  • I asked how to export favorites from firefox to IE 8. i got how to import from IE8

    i want to know how to EXPORT favorites from firefox to IE 8.
    your instructions told me how to IMPORT from IE8 to firefox.
    now, please tell me how to EXPORT favorites FROM firefox

    In the Bookmarks Manager (Library) there is a toolbar with the Back and Forward button and three other buttons (Organize, Views, Import & Backup).
    * The first (gear) button is the Organize button with basic edit menu items for bookmarks
    * The second button is the Views button that allows to change the sort order for viewing purposes (doesn't sort permanently).
    * The third (star) button is the Import & Backup button that allows to backup and restore a JSON backup and import and export an HTML backup and import bookmarks from other browsers.
    Hover each button to see the tooltip or click each of them to see what they do.
    * https://support.mozilla.org/kb/how-do-i-use-bookmarks

Maybe you are looking for

  • Connecting to servers in ".local" domain

    Hi, all... there's probably a really straightforward answer to this, but can I find it? I'm running 10.5. To access my corporate intranet on a Windows machine on my corporate network, you type the URL "http://intranet"; to access webmail, you type "h

  • Focusing a text field

    Hi, I have an input field in a view. This field is not getting focused when the view appears. What I mean is the cursor is not appearing in the field when the view appears and once the user taps on the field, it is focusing. So without tapping, how w

  • Why Zen X-Fi can't screen

    hi there, I don't why my new Zen X-Fi can't auto screen off when listening music, it needs to lock the player in order to do so... is it too stupid to do that? why not implement this feature to the firmware? thanks

  • How can I turn off a specific shortcut?

    I am trying to turn off a specific shortcut in Lion 10.7.5 When I hold shift and click on the scroll wheel button, the screen flicks left to the widget screen. I want to disable this specific shortcut and no others. Any help would be appreciated!!! T

  • Failed to start a managed process after the maximum retry limit

    Hi, Getting the following error /app/oracle/product/101202/opmn/bin (OID)>opmnctl startproc ias-component=OID opmnctl: starting opmn managed processes... ================================================================================ opmn id=smtest0