How to export from CR2 to JPEG with GPS coordinates [LR5.7]

I have CR2 files with GPS coordinates. During export to JPEG I lost GPS information. How to get JPEG's with GPS coordinates?

See using lightroom 5.7.1 not all the meta-information is copied when exporting pictures

Similar Messages

Exporting From FCE to IDVD With Chapters How long

Exporting From FCE to IDVD With Chapters How long will the DVD hold??? if i have an hour and 40 minutes of HD footage all cut together with FCE and has been saved as a movie file, how many hours will IDVD let me burn to it?
if i run over the allowed amount will it say i need to drop quality, i am editing loads at the moment and dont want to get to the end and it come up with an error message. also will idvd include the chapter markers if i export with them?

Sure, no problem.
1. Go to Project > Project Info in iDVD.
2. Make sure "DVD Type" is set to a single-layer DVD.
3. Under "Encoding," choose "Best Performance." Is the arrow solidly in the green portion of the quality bar? If so, go ahead and burn your disc.
4. If not, choose "High Quality." Again, go ahead and burn your disc if the arrow is solidly in the green.
3. If the arrow still isn't in the green, select Professional Quality. If the arrow's in the green, burn your disc. If not, you'll have to delete some of the menus (scene selection, etc.) or menu content and check again. You should be able to burn up to 2 hours if you don't have a lot of other menu content.

How to Export from table view to Excel (not BI query)?

There is a 'How to' document explaining how to export from an iView using a BI query:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/47fe4fef-0d01-0010-6f87-ed8ecb479123
However:
This 'How-To' document is using an example of a BEx query. I am not using a BEx query, therefore I do not have an "Info port". How can I download to Excel from a table view that is not an iView of a BI query? (It is just a internal table coming from a BAPI).

keenneth,
i am using the query from SQL server, i am having the same problem of not having info port. so did you find a work around for exporting to excel with filters for non sap queries ?
any body who had come across this situation , plz guide me.
thanks in advance
ravi

Bridge: when I want to export from .psd to .jpeg the export window opens but the target (Ziel) window is empty, thus no target can be selected. This happens since a brigde shut down after "out of memory"

Bridge: when I want to export from .psd to .jpeg the export window opens but the target (Ziel) window is empty, thus no target can be selected. This happens since a brigde shut down after "out of memory"
Felix

Not quite following your terminology.
Möchten Sie es vielleicht mal auf Deutsch versuchen?

How to export from lightroom to premeire pro?

How to export from lightroom to premeire pro?

You cannot export directly from Lr to another program.
You have to export to your hard drive and then open them in Premiere.

How to export from Address Book to Microsoft Outlook

I am using a mail merge program that requires cvs or test files of address cards in order to operated. I can't figure out how to export from Address Book in any other format than Vcard. Does anybody know how to either export in text or covert Vcard files to text or CVS?

Try Address Book Exporter.

Exporting from FCP for use with PC

Hey all,
Trying to deliver a high-med quality 8 minute video from FCP for use with a PC. I've tried exporting both a .mov and .avi using DVCPro50, but neither are readable through the PC. Best I can get is sometimes audio will show up. Does anyone have a good solution for exporting from FCP for use with a PC?
Thanks again for your help!

I don't think DVCpro50 codec is available on a PC. I think panasonic has a special license with apple only, so you need to try a different codec for the avi.

Re-Importing DNGs which were exported from CR2s

Going forward, I'm sure this issue could be solved by a workflow change, but for now, I have a small problem:
I shoot a ton of images (20,000+ per year) and process in Lightroom. I have a workflow where I export my .CR2 originals as DNG for archiving to an external drive, to free up space on my local drive. Once they're copied over, I delete the folders from my Mac's hard drive via the Finder, which leaves the previews still searchable within Lightroom. This is great for searching and referencing archived stuff that I don't necessarily need to re-edit.
However, when I do need to re-edit something, once I copy the folder from the exernal drive back to its original location on my local HD for editing in LR, Lightroom doesn't recognize the files automatically since they now have a different file extension. I must click each thumbnail's question mark and point it to the file in question. Lightroom will not apply this same action to nearby photos.
Any thoughts on how to speed this up rather than addressing each image, one-by-one?
Thanks in advance for any insight.

That is indeed the procedure for importing playlists. Been using it a lot, trying to get these playlists to re-import.
iTunes requires .m3u or XML for playlist import. iTunes doesn't import playlists in text (.txt) format, even though that's the default format when you export them.
If I'd run an import immediately after exporting a playlist I'd have caught this. But who would expect that iTunes might not accept its own default playlist export format for playlist import?
The problem: how to extract and use the information in the text files iTunes exported.

How to export from iPhoto 6 to SD card?

Hi: I've purchased a digital picture frame. It takes an SD card. My question is how to export photos from the folder I've placed them in onto the SD card. The digital frame doesn't have a USB cable connection. Should I take this one back and get one with a USB cable to transfer that way? Thx

Walt: If I'm correct in understanding that the question is how to copy pictures onto the card when the frame can't be connected to the Mac, the solution is a $10 USB card reader. Remove the card from the frame, insert it in the reader, connect it to the Mac, and copy the pix from that folder Terence has advised you to export them to. Then return the card to the frame.

How to Export from iPhoto in time-taken order.

In the archived discussion "http://discussions.apple.com/message/11510994#11510994" entitled "Exporting from iPhoto Library to hard disk for archiving", LarryHN said to "...use the export option to name files sequentially...". If you're wondering what option that is, I believe it is File -> Export... -> File Export -> Use album name. That causes your iPhoto Library to be output in the order you see them within iPhoto because iPhoto creates the files with sequentially numbered file names prefixed by the album name, such as "Library - 01.jpg", etc. Thanks Larry

It's not marked as a question, it was my mistake... I responded to the How to... as a question and not as an instruction...
Regards
TD

How to export from FCP to Flash .FLV ?

Hello All;
Could someone explain how I export a Final Cut Studio project to .FLV ? I read many places that it can be done but I do not have any such option (That I can find) on the FCP File menu or File Export menu.
Currently, I'm exporting to Quicktime and then using the Flash Video Encoder that came bundled with Flash but I am not getting very good quality and I'm wasting a lot of time trying it over and over again.
Thanks.
Tim

wtd wrote:
Currently, I'm exporting to Quicktime and then using the Flash Video Encoder that came bundled with >Flash...
Then theoretically access to this FLV export option should be visible in other areas where you would perform a QuickTime Export.
In FCP, for example, you could go to the menu: File > Export > Using QuickTime Conversion:
Once clicked, an additional panel is going to appear. At the bottom of said panel will be a toggle that says "Format". By clicking this button you will reveal the other options available to you. With the Flash component installed you should have access to an option: "Flash Video (FLV)":
Once you've selected this you can then click the "Options" button and this will open a final panel where you can adjust all the parameters of the exported movie. Should look like this:
That is one way to do it.
Another way to do all this would be to build a Compressor preset. All the above export options, if available in FCP, are going to be available to Compressor as well. You could set up a preset and save it in Compressor, or even save it out as a droplet that you can drop exported movies onto. Simply dropping onto a droplet triggers the FLV encode.
One final "workaround" would be to export to H.264 and then change the resulting movies extension from .mov to .flv. This will cause it to open in Flash, usually. Flash Player 9 Update 3, released on December 3, 2007 allowed for the playback of H.264 with Flash. So as long as the end-user has this version of Flash, or newer, on their end—then playback should not be an issue.
Hope that helps.

Cannot find how to export from Pages to ePub

I have Pages '09, and looked on Apple's tutorials for how to export as an ePub file... It says just click share, export, ePub, but I do not have an ePub option. My only options are PDF, Word, RTF, and Plain Text. Am I missing something very obvious?

It's interesting that 'they' have decided to NOT let folks on 10.4 produce an ePub (from Pages). I understand that I cannot 'do' the whole ePub consumer side on this machine but I was hoping to get a bit of a headstart while on the road. (The mini at home base is running 10.6 and is my ePub production environment. That version of iWork9 does have the later Pages, which is why I was surprised when I could not find the same UI on my 'travel' machine.)
As to why I don't upgrade the G4? I need one machine that can run Classic. So it will live at 10.4.11 for the rest of its life.
I have my fingers crossed that today's announcement will include a suitable Macbook Air update ... one that is not too wide and/or too high. (The 13" 'books have been too large a footprint to replace my trusty 12" so I've been holding out...)

I have a new imac and am trying to transfer files from my old gateway using a flashdrive. I cannot figure out how to export from itunes to the drive.

I am trying to import my itunes library from my old gateway computer to a new imac. I cannot figure out how to export the library from the gateway computer to a flash drive to transfer.

Copy the entire /Music/iTunes folder to /Music/ on the new computer.
That is all you need to do.

How to export from Outlook 2011 to Outlook 2013?

As an Outlook user of old when I bought my Mac I was keen to try out Outlook 2011 for Mac which managed to import my Windows PSTs without any issues.
However, now I have a Windows 8 machine running Outlook 2013 I want to go the other way and I don't see any easy way of doing so.
I'm hoping that someone can tell me how I export all of my mail from Outlook 2011 to Outlook 2013
without having to buy a 3rd party tool given the investment I've already made in the Microsoft platform.
Many thanks in advance.
Many thanks and kind regards, Cliff Hobbs Microsoft MVP - ConfigMgr/ SMS (2004 - Present) Owner FAQShop.com - Giving You the FAQs | http://www.faqshop.com/wp/

As an Outlook user of old when I bought my Mac I was keen to try out Outlook 2011 for Mac which managed to import my Windows PSTs without any issues.
However, now I have a Windows 8 machine running Outlook 2013 I want to go the other way and I don't see any easy way of doing so.
I'm hoping that someone can tell me how I export all of my mail from Outlook 2011 to Outlook 2013
without having to buy a 3rd party tool given the investment I've already made in the Microsoft platform.
Many thanks in advance.
Many thanks and kind regards, Cliff Hobbs Microsoft MVP - ConfigMgr/ SMS (2004 - Present) Owner FAQShop.com - Giving You the FAQs | http://www.faqshop.com/wp/
Hi,
As in my estimation, it’s not viable to export Outlook 2011 to Outlook 2013 Windows 8 without having any third party tool, somehow without any payment it is possible, by using any free trial version for limited file conversion you can try any reliable third
party tool but for multiple or unlimited Mac OLM files conversion you have to make use of a third party tool. In the midst of various third party tools it’s too complicated to find out that, which tool is reliable for making this conversion.
Or else can try manual procedure for this conversion, but its lengthy and no surety. Outlook Mac Exporter software is one of the reliable tool for exporting Mac Outlook 2011 items to PST file format. You also can try this tool and I am sure it will provide
you desiring Outcome by exporting OLM files to PST file format.
Read more through this article: http://articles.abilogic.com/39444/transfer-olm-pst-windows-outlook.html

How to Export from Numbers 09 to Address Book or print mailing labels?

I need to know how to export contact information that is part of a Numbers sheet to Address Book and to be able to print mailing labels. I do not have to print from Address Book but do need to produce address labels. I've tried a number of things from the help menus in Numbers 09, Address Book, Word and Excel for MAC 2011. I probably just don't have a grasp fo what I'm supposed to do. Thanks much!

nushuz,
I can sympathize if you're having trouble following the directions. Address Book will reject what looks like a perfectly good CSV file if it doesn't like the data it finds inside.
Here's what I have found to be the best way to create a CSV from Numbers for Address Book import...
Drag an Address Book contact to a Blank Sheet in Numbers. That's a Sheet in which you have deleted the default table.
This will give you a properly formatted table for conversion to CSV, and you just have to add all your contact data to the table you just created. Before you begin though, it's a good idea to Unhide all Hidden Columns, and there are probably many. Hover over any Column Label and click the menu triangle, selecting "Unhide All Columns", or words to that effect.
After you have all your data situated in the table, Share > Export > CSV and then Import to Address Book.
Jerry

How to export from CR2 to JPEG with GPS coordinates [LR5.7]

Similar Messages

Maybe you are looking for