How to export Fw CS3 Symbol Library to Fl CS3 ?

Is it possible to export Symbols created in Fireworks CS3 to
Flash CS3 Professional witout losing their properties?

Curt
>Just to be clear CS4 you see some, but not all keywords, or in CS4 you see no keywords?<
I've made more sense of the problem. It's to do with Olympus Raw files - .orf. I've been shooting in Olympus camera raw since 2004.
My workflow is: import the raw files into Bridge via a card reader; rename them in Bridge as [filename].ORF, apply keywords, edit them in Adobe Camera Raw, save them as [filename].PSD (or sometimes .TIF or .JPG), move the PSDs to a working folder, edit them in Photoshop, and finally move them to a 'Finals' folder.
In Bridge CS3, in my old computer, I can see all keywords for ORF files. I can also see all keywords for the working and final PSDs, TIFs and JPGs.
In Bridge CS4, in my new computer, I cannot see any keywords for ORF files, or for the working and final PSDs, etc.
I can only see keywords for files which started life as TIFs - photos scanned with my negative scanner or flatbed scanner.
This is also true in both Bridge CS3 and Bridge CS4 in my new laptop, which is running XP Pro. I could see the keywords in my old laptop, but not in my new one.
>If you right click on file info in Bridge do you have the keyword listed in keyword box? Do the same with Windows Explorer and see if keyword is listed in Properties/details.<
'Keyword' isn't listed in Windows Explorer, though everything else under the sun is.
The keywords are listed if I right click in Bridge CS3 on a file in my old computer. And if I click on Advanced, and expand the categories, e.g. XMP or Dublin Core Props, I get a heading 'xap:Keywords (bag container)', and a list of all the keywords attached to the file.
But the same file in CS3 in the laptop, or CS4 in laptop or new computer, has no keywords in Advanced.
I've had a quick look on the web for topics connected with Olympus camera raw/orf/losing keywords, but so far haven't found anything.
Mary

Similar Messages

How do i transfer a symbol library from .ai cs3 to cs6

how do i transfer a symbol library from .ai cs3 to cs6

You could just copy the ai file to the new folder. All custom symbol libraries are just ai files.
But since CS3 9-slice guides were introduced, so you might want to check your symbols first (if the guides might be applied or if they are correctly not applied - whatever is appropriate)

How to export photos from one library to other?

I have two Aperture's libraries. The first one has my full albums, since 2001, and runs on my 2Tb external HD. The other one, has only the current year's photos, and is storaged on my Macbook Pro local disk.
So I want to export ou migrate all my 2011 photos from my local library to the first one. So I can start the new year (2012) with a new empty library on my mac.
How is the best way to do this?
Thanks.

You should look into Aperture's "Duplicate Project Structure" command to see if it helps. You might be able to set up your 2012 Library prior to "archiving" 2011.
Scroll down this User Manual page.
Duplicating a Project Structure
If you routinely use the same project structure populated with the same types of albums and folders, you can duplicate the structure of an existing project and create a new, empty project with the same arrangement of albums and folders. If the project you’re duplicating has Smart Albums, the settings for those Smart Albums are duplicated as well.
Many users are better served by having one Library, and putting Masters on an external drive as their Library grows too big. If you are interesting in this, ask.

How to export iPhoto Albums to Library or Book?

How can I export iPhoto Albums to the Library or iBook?

You're posting in the iPhoto for iOS forum... you know, iPad, iPhone, etc. That's why I brought up the camera roll. If your question is directed to iPhoto on the Mac, this isn't the right forum. You need to go here:
https://discussions.apple.com/community/ilife/iphoto

How to export photos from iPhoto Library to normal folders?

Hi,
I have been using iPhoto for a long time now, and I have many many thousands of photos well organised with albums and folders in my iPhoto library. However I find some things difficult and inefficient to do in iPhoto and I'm trying to move into other softwares like Photo Mechanics and Lightroom.
One of these things I find hard to do is to backup, I don't want to keep something like three libraries and import from camera into one library and do the same to the other two, switching external drives and computers. Nor do I want to copy a 250GB library once every couple of days, since it takes a while with non-SSD drives. Is there a more effective way to do this?
In the iPhoto "package contents" all my photos are organised by date, which is not really great since I have albums in my library filled with photos from all around my library organised in folders, if that made any sense. Is there a way to export my iPhoto library keeping all my folders and albums intact (also ratings)? Like folders containing photos within folders with the names that were used inside iPhoto? I've already tried using the normal export tool, it doesn't work since it goes by dates or "events".
I have tried the "iPhoto to Disk" software, but I'm curious if there is a better way? Will it be easier to do this in Aperture?
Thanks in advance

export using the option for "subfolder format" - Exporting From iPhoto
Backing up - simplest use TimeMachine - or software like Carbon Copy Cloner that can update only the new portions of the iPhoto library
As to "better than iPhoto to disk" - it is a rest program - what is it that you want to do "better"
And for Aperture questions you will get better answers in the Aperture forum as that is where Aperture uses hang out
And with regards to going into the iPhoto library package contents - don't - it is not supported and is very dangerous - a small mistake there can wipe out your library - there never is a reason to be in it unless instructed by an expert - there simply are no user serviceable parts in it
LN

How to export / import workspaces from CS3 to CS5

How to export / import workspaces and other preference settings from CS3 to CS5.

copy the files from
(username)/library/preferences/AICS3settings/en_us/workspaces
to
(username)/library/preferences/AICS5settings/en_us/workspaces

How to export photos from library to a flash drive

How do you export photos from your library to a flash drive?

Assuming you're referring to iPhoto on your iMac export the photos to a folder on the Desktop via the File ➙ Export ➙ File Export menu option. Then drag the folder of photos onto the flash drive.
More about exporting out of iPhoto can be found in the following User Tip by Terence Devlin: How to Access Files in iPhoto
OT

How to export my library off my ipod nano to iphone

Hello - Please can someone tell my how to export my music library of nearly 500 songs off my Ipod Nano 2nd generation onto my Iphone 5 - only the purchased songs have been exported in Match.
Thanks

Go to iTunes and Transfer all songs from iPod to Computer after that, you can sync those songs from itunes to your iphone. IF you have all the songs from iPod Nano to the computer, then just simply sync your iphone.
If you have 3rd party music, most likely, those won't transfer. You'll have to get a 3rd party app to get those music back. If you do, I strongly recommend getting MP3 Music Downloader Free (download unlimited music for free)

How to export height quality gif frm Flash CS3?

Hi,
When i export a .GIF movie from Flash CS3 , the movie quality is not good, here is some dot dots in the gif movie.
How to export height quality gif ? . Kindly explain pls as soon possible...
Thanks & Regards
Mohan

GIF is a color restricted format with on/off support for transparency. There's really no settings you can tweak to output a better GIF. You have a drop-down during GIF sequence export to allow transparency, select the amount of colors (up to 256) and you can choose dither to save a little filespace. The only 2 things in there that really matter are dither and amount of colors used to export.
If your content is very similar (e.g. not a lot of complex gradients/shadows/etc) and is limited in color use turning down the amount of colors used and dithering is your only option.
Make sure you're exporting the GIF via "Publish Settings" so you get a single animated GIF and not file->export->movie because this creates a separate sequence of GIF images for each frame.

How to export and import a document library data to a new sharepoint farm

Hi
i have a sharepoint 2010 farm and has one sharepoint web application
in this application it has a document library and this doc library has a 2000 folders and each folder has 2500 documents
, here i how i export upto 500 folders from this doc library to a new sharepoint farm
adil

if your both farm are on same version level then you can use export & import funcation if only Document library required.
Perform export on source farm
Export a site, list, or document library in SharePoint Server 2010
copy the files to target farm and run the import.
Import a list or document library in SharePoint Server 2010
another way is backup the site collection from source and restore it to destination.
for backup: http://technet.microsoft.com/en-us/library/ee748617(v=office.14).aspxFor
restore: http://technet.microsoft.com/en-us/library/ee748655(v=office.14).aspx
there is always 3rd party tool options.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

How to export a symbol as a windows icon?

Is there an easy way to export a LabVIEW symbol as an icon? When putting a VI on the desktop, it would be nice if it had the same symbol as within LabVIEW. Instead, all VIs appear on the desktop with a standard icon. In the past, I copied the symbols to a painting programm, saved it, and converted it by means of shareware programs to a windows icon. My hope is that new LabVIEW versions provide this functionality. Unfortunately, I could not yet find this feature.

Mat,
Similar to a TXT or DOC file, the icon associated with a VI file is linked at the Windows system level. Therefore, there may be some hack that allows you to change the icon for all VIs but not each VI individually.
A colleague suggested a method that might work for you. You can save the VIs in a directory somewhere else and make a shortcut to them on the Desktop. You can then change the icon of these shortcuts.
I hope that works.
Thanks,
Stephen Meserve
National Instruments

How to download Encore CS3 Content/Library

Hello,
I have losed the Encore CS3 media, and I have succesfully to download the program installer, but I can't find in the web the place to download the Encore CS3 content/Library (menus, buttons, etc)
Do you can supply me a link to download it?
Thanks,

There is a separate download for the Encore CS6 functional content... as far as I know, CS3 is "all in one" so when you download the program, everything is included in one install

How to create a c++ shared library (.so) for linux real time (for myRio) with Eclipse to use in LabView?

I tried already these Tutorials and Advices but I didn't find a solution:
- http://www.ni.com/tutorial/14625/en/
- http://www.ni.com/tutorial/14690/en/
- http://forums.ni.com/t5/LabVIEW/Shared-Library-on-myrio-Linux-Real-time-system/m-p/2842540/
- http://forums.ni.com/t5/LabVIEW/How-to-create-shared-library-for-linux-real-time-target-in/m-p/28218...
- and some more
I want use c++ codes on linux real time. For testing reasons I want to have a function that adds 2 values and gives the result.
I've done these steps:
1. writing a c++ file in Eclipse (see screensot 2)
2. building a shared library (.so) from my c++ project in Eclipse (with Cross GCC)
3. putting this file on myRio (path: /usr/local/lib/)
4. creating a VI that calls this library from Labview with a "Call Library Function Node" (see screenshot3)
5. Setting the properties for the "Call Library Function Node" (see screenshots 4-7)
After I run this VI i get this error message: LabVIEW: (Hex 0x627) The function name for the ... node cannot be found in the library. To correct this error, right-click the Call Library Function Node and select Configure from the shortcut menu. Then choose the correct function name. (see screenshot1)
I've tried a lot things to solve this problem but I couldn't find a solution. Would be very happy if anyone can help me. I guess that I have to edit my c++ code to export my function (symbol). But I have no idea how to make it. I also tried it with a dll file in the same folder but it didn't help.
Perhaps someone can send an example which works on myRIO.
Thanks!
screenshot1
screenshot2
screenshot3
screenshot4
screenshot5
screenshot6
screenshot7

can see it in the screenshot8 there is a function called "_Z8AddierenddPd" instead of "Addieren". I copied this name to Labview (see screenshot9) and it worked.
I'm sure that there is a way to compile the shared folder with gcc without decorations (mangling). But I don't know how. If someone has a recommendation I would be very glad!
Prepend each function declaration that you want to be available without name decoration with
extern "C" <your function declaration>
Or if you have multiple functions you want to export you can in the header file where you declare your functions simply use:
#ifdef __cplusplus
extern "C" {
#endif
<all your function declarations>
#ifdef __cplusplus
#endif
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How to export an entire model content (tables and charts) to pdf

Hello,
I would like to export a complete model, which includes tables and charts, to pdf.
I am already familiar with [this|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/47fe4fef-0d01-0010-6f87-ed8ecb479123] tutorial but it explains how to do it for a single table and doesn't deal with charts. What I would like to do is take like a screenshot of the entire iView/model content to pdf.

Hi, rbish-
Not for the entire stage. The only thing you could do is to highlight everything and convert it to a symbol, then ensure that you move your triggers and labels to the new symbol. Then you could export an individual symbol, which will also package all of the dependent symbols.
Hope that helps,
-Elaine

How to use the separate symbol in the text field in the adobe form.

Hi,experts,
I dont know how to use the separate symbol to make a paragraph separate into several lines correctly in the text field in the adobe form.
Action:
1. config the ADS successfully.
2. create the adobe form with a mult-line textfield(binding the 'remark' context in the interface of the form) using sfp.
3. create a WDA for invoke the form and transfer the 'remark' context data.
I use the following codes to display the paragraph in the PDF document:
CONCATENATE
'1、aaaaaaaaaaa；'
'2、bbbbbbbbb '
'3、ccccccccccc'
'4、ddddddddd'
INTO remark .
lo_nd_z_hr_php_payslip->set_attribute(
EXPORTING
name = `REMARK`
value = remark ).
But I found all the content aren't paragraph separate correctly in the text field in the adobe form when I run the WDA.
Could you please give me some hints to make the paragraph separate correctly in PDF document? Thanks a lot in advance!
My email is : [email protected]
Best regards,
Tao
Edited by: wang tao on Apr 8, 2008 1:58 AM

Hi,
If it is just a one word value then you could use this in the exist event;
this.rawValue
= util.printx(">?<*",this.rawValue);
This changes the first character (represented by the ?) to uppercase (represented by the >) and all trailing characters (represented by the *) to lowercase (represented by the <).
If you wanted something more general ... if they could also enter a middle name then you could call a function like;
function toTitleCase(textValue)
return textValue.toLowerCase().replace(/\b[a-z]/g, function replacer(match) { return match.toUpperCase(); });
This uses a regex to change all lowercase letters following a word boundary to uppercase.
Bruce

How to export Fw CS3 Symbol Library to Fl CS3 ?

Similar Messages

Maybe you are looking for