How to export HD?
Thanks so much for the help guys! I think I'm cursed! :(
I have CS4 and can't figure out how to export my HD sequence as uncompressed HD. I tried uncompressed AVI and MOV (compression "none") but had to change the height and width up to 1920x1080 thinking that would make it HD. Apparently it didn't because it doesn't look very good. It's faded and stretched vertically too much. That doesn't make sense because the source and ouput have the exact same size! Grrr!
BTW, I don't think it's exporting the color finesse 2 adjustments I made on it. I have the full version of CF2 installed using the latest update to CS4 in the plug-ins folder. It worked on the sequence fine, but when it goes to the exporter I don't see the corrections in the outputted file. And when I try to use H.274 or whatever it's called and use the HD setting (the only output option I see that says HD) it gives an error saying that Color Finesse needs to be installed using the AE installer. But Premiere and AE are on the same installer file. There's just one! I'm so confused!!!
Sorry for the confusion. I was at the exporting step. However, if you think that part of the problem that I'm having is that I imported a file with a codec that's giving PPro problems, then I need to go back and reconvert the original file and then import that into PPro. Does that make sense? I know it's a bit confusing.
Here's the ultimate plan, step-by-step:
1) I have footage in a codec that PPro won't recognize (it's what the news station used for their broadcast)
2) I have to convert that footage into some type of file the PPro will recognize.
3) I then import that footage into PPro and do editing, replacing the audio track with my own and making some edits and color correction using color finesse 2.
4) I then will export that footage as HD.
5) Then I will convert that exported footage into something smaller.
6) I will then upload it to Vimeo and place it on my website.
The problem I'm having is with step 4. What's being exported does not look right and does not look like HD, it's faded and blurry like SD. Color Finesse 2 has an error message when trying to export.
So my question is this
A) what exact settings do I need in PPro to export the footage as lossless HD?
B) why is color finesse 2 giving me an error message saying it has the wrong "flavor" installed?
C) If the problem is that I used H.246 to convert the footage back in step 2, what codec should I use and how can I do that using an FFMpeg gui program (FFMpeg is the only program that can decode the xdvb codec the original file used)?
Hopefully, that helps clear things up.
Similar Messages
-
How to export a data as an XML file from oracle data base?
could u pls tell me the step by step procedure for following questions...? how to export a data as an XML file from oracle data base? is it possible? plz tell me itz urgent requirement...
Thankz in advance
BalaSQL> SELECT * FROM v$version;
BANNER
Oracle DATABASE 11g Enterprise Edition Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS FOR 32-bit Windows: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
5 rows selected.
SQL> CREATE OR REPLACE directory utldata AS 'C:\temp';
Directory created.
SQL> declare
2 doc DBMS_XMLDOM.DOMDocument;
3 xdata XMLTYPE;
4
5 CURSOR xmlcur IS
6 SELECT xmlelement("Employee",XMLAttributes('http://www.w3.org/2001/XMLSchema' AS "xmlns:xsi",
7 'http://www.oracle.com/Employee.xsd' AS "xsi:nonamespaceSchemaLocation")
8 ,xmlelement("EmployeeNumber",e.empno)
9 ,xmlelement("EmployeeName",e.ename)
10 ,xmlelement("Department",xmlelement("DepartmentName",d.dname)
11 ,xmlelement("Location",d.loc)
12 )
13 )
14 FROM emp e
15 , dept d
16 WHERE e.DEPTNO=d.DEPTNO;
17
18 begin
19 OPEN xmlcur;
20 FETCH xmlcur INTO xdata;
21 CLOSE xmlcur;
22 doc := DBMS_XMLDOM.NewDOMDocument(xdata);
23 DBMS_XMLDOM.WRITETOFILE(doc, 'UTLDATA/marco.xml');
24 end;
25 /
PL/SQL procedure successfully completed.
. -
I'm trying to find out how to export my apple contacts to the Salesforce software and they need to be in a csv format and I don't know if this is possible and how to do it if it is?
I think there are third-party programs which will do that, but you can also do it with Automator:
See the links in my post, here: https://discussions.apple.com/message/22390873#22390873
The file or clipboard contents will be in Tab Separated vars, so you'll have to open with a spreadsheet program and save as Comma Separated Vars format. -
In SSMS after creating the query Report, how to export excel the same report from SSMS
for Beginners in SSMS after the report is created , how to export the same report to excel, I did try the option to task and export and follow the procedure, this procedure does not export the same report, the one was created, unless I am missing some steps,
is there a way to do just like we do in SSRS go to solution explorer, and properties and add the Target Server URL or not
in SSMS,
after I save the report it saves in project , can some one please guide me how to do it, and what steps I am doing wrong,
any help will be great. I am not technical person, just starting to learn from internet.
thanks in advance.As you have said you are not a technical person try using Import Export wizard.
Refer this link
http://www.mssqltips.com/sqlservertutorial/203/simple-way-to-import-data-into-sql-server/
And another simplest one is to copy the result set from the query window. Right click the result and select "Copy with Headers".
Regards, RSingh -
How to export best quality gif animations in flash
how to export best quality gif animations in flash
GIF is a color restricted format with on/off support for transparency. There's really no settings you can tweak to output a better GIF. You have a drop-down during GIF sequence export to allow transparency, select the amount of colors (up to 256) and you can choose dither to save a little filespace. The only 2 things in there that really matter are dither and amount of colors used to export.
If your content is very similar (e.g. not a lot of complex gradients/shadows/etc) and is limited in color use turning down the amount of colors used and dithering is your only option.
Make sure you're exporting the GIF via "Publish Settings" so you get a single animated GIF and not file->export->movie because this creates a separate sequence of GIF images for each frame. -
How to export data with column headers in sql server 2008 with bcp command?
Hi all,
I want know "how to export data with column headers in sql server 2008 with bcp command", I know how to import data with import and export wizard. when i
am trying to import data with bcp command data has been copied but column names are not came.
I am using the below query:-
EXEC master..xp_cmdshell
'BCP "SELECT * FROM [tempdb].[dbo].[VBAS_ErrorLog] " QUERYOUT "D:\Temp\SQLServer.log" -c -t , -T -S SERVER-A'
Thanks,
SAAD.Hi All,
I have done as per your suggestion but here i have face the below problem, in print statment it give correct query, in EXEC ( EXEC master..xp_cmdshell @BCPCMD) it was displayed error message like below
DECLARE @BCPCMD
nvarchar(4000)
DECLARE @BCPCMD1
nvarchar(4000)
DECLARE @BCPCMD2
nvarchar(4000)
DECLARE @SQLEXPRESS
varchar(50)
DECLARE @filepath
nvarchar(150),@SQLServer
varchar(50)
SET @filepath
= N'"D:\Temp\LDH_SQLErrorlog_'+CAST(YEAR(GETDATE())
as varchar(4))
+RIGHT('00'+CAST(MONTH(GETDATE())
as varchar(2)),2)
+RIGHT('00'+CAST(DAY(GETDATE())
as varchar(2)),2)+'.log" '
Set @SQLServer
=(SELECT
@@SERVERNAME)
SELECT @BCPCMD1
= '''BCP "SELECT
* FROM [tempdb].[dbo].[wErrorLog] " QUERYOUT '
SELECT @BCPCMD2
= '-c -t , -T -S '
+ @SQLServer +
SET @BCPCMD
= @BCPCMD1+ @filepath
+ @BCPCMD2
Print @BCPCMD
-- Print out below
'BCP "SELECT
* FROM [tempdb].[dbo].[wErrorLog] " QUERYOUT "D:\Temp\LDH_SQLErrorlog_20130313.log" -c -t , -T -S servername'
EXEC
master..xp_cmdshell
@BCPCMD
''BCP' is not recognized as an internal or external command,
operable program or batch file.
NULL
if i copy the print ourt put like below and excecute the CMD it was working fine, could you please suggest me what is the problem in above query.
EXEC
master..xp_cmdshell
'BCP "SELECT * FROM
[tempdb].[dbo].[wErrorLog] " QUERYOUT "D:\Temp\LDH_SQLErrorlog_20130313.log" -c -t , -T -S servername '
Thanks, SAAD. -
How to EXPORT a concurrent program from one instance to another
Hi,
I am new to EBS.
How to EXPORT a concurrent program from one instance to another. I dont want to use FNDLOAD.
Is there any other way from where we can export the concurrent program to anothere instance from CLIENT connection server.
Thanks
AsisHi;
What is EBS version? Why you dont use FNDLOAD?
Pelase see below thread
Move concurrent program to prod
Move concurrent program to prod
Regard
Helios -
How to export Tabel? (Exporting and Importing of RFCDES table)
Hi,
We are doing system Refresh on qualitysystem,
I want to export the Tables and reimport them after system refresh
Tables like: RFCDES
How can export this table ?
How to import the table?
It is very urgent, Please give me the solution as soon as possible
Note: we are using BRTOOLS
Points awarded
Regards,
RaviHi Ravi,
Create a control file like "rfcdes_export.ctl"
export
file '/usr/sap/data/export_rfc.dat
delete from rfcdes
select * from rfcdes
Take the export :
R3trans -w rfcdes_export.log rfcdes_export.ctl
Create the control file "rfc_import.ctl"
import
file '/usr/sap/data/export_rfc.dat'
Import it:
R3trans -w rfc_import.log -u 1268 rfc_import.ctl
Hope it will help you.
Best Wishes.
Kumar -
How to export photos from photo gallery to my iPad
How to export photos from photo gallery to my iPad
I had no trouble finding the "Export" tools in the "File" menu. They are greyed out when no photo is selected, but they are functional after selecting one or more photos.
I agree that it would be nice to have the "Reveal in Finder" option back, but they probably don't want us mucking about inside the Photos library structure. -
How to export photos from lap to to ipad
how to export photos from lap top to ipad,i keep draging them in ipad devise logo,photos jump back in place.if i click on to export in i photo,it only would go to files??????help!!
Use the photo set up in the iTunes sync
LN -
How to export photos from iMac to iPad and iPhone
How to export photos from iphoto to my iPad and iPhone the easiest way.
There are a number of methods including:
Via iTunes and USB cable: iTunes: Syncing photos - Apple Support
Via Photo Stream: http://support.apple.com/en-us/HT201317
Via 3rd party app: http://www.photosync-app.com
Via 3rd party cloud services such as Dropbox -
How to export photos from one iPad to another
How to export photos from one iPad to another
Sending the photos over WiFi might be the easiest way for you to accomplish this. The Wireless Transfer App should work. You will both have to download the app on your own devices. Read about it here.
http://www.wirelesstransferapp.com/ -
How to export pictures from my ipad to my computer
HOW TO EXPORT PHOTOS FROM MY IPAD ?
How to Transfer Photos from an iPad to a Computer
http://www.wikihow.com/Transfer-Photos-from-an-iPad-to-a-Computer
Importing Personal Photos and videos from your iOS device to your computer.
http://support.apple.com/kb/HT4083
Also check out the Photo Manager Pro app.
https://itunes.apple.com/us/app/photo-manager-pro/id393858562
Cheers, Tom -
How to export data from a Oracle table to a delimited file?
I know how to load delimited file into a table, but how to export
data from a Oracle table to a delimited file?
Thanks in advance.Try looking at this link, it's long but there's three different solutions discussed in it. If you look at Barbara Boehmer's
solution in her posts in the link below you'll see that she's addressed your concerns with spool files.
Re: utl_smtp and triggers -
How to export data from a spread sheet which has multiple work sheets?
How to export data from a spread sheet which has multiple work sheets to a single text file with fixed length fields?
Hello s1,
saving them as CSV will not give a fixed legth output but, as the naming says, a Character Separated Value file.
Regards
Marcus -
How to export some data from the tables of an owner with integrity?
Hi to all,
How to export some data from the tables of an owner with integrity?
I want to bring some data from all tables in a single owner of the production database for development environment.
My initial requirements are: seeking information on company code (emp), contract status (status) and / or effective date of contract settlement (dt_liq_efetiva) - a small amount of data to developers.
These three fields are present in the main system table (the table of contracts). Then I thought about ...
- create a temporary table from the query results table to contract;
- and then use this temporary table as a reference to fetch the data in other tables of the owner while maintaining integrity. But how? I have not found the answer, because: what to do when not there is the possibility of a join between the contract and any other table?
I am considering the possibility of consulting the names of tables, foreign keys and columns above, and create dynamic SQL. Conceptually, something like:
select r.constraint_name "FK name",
r.table_name "FK table",
r.column_name "FK column",
up.constraint_name "Referencing name",
up.table_name "Referencing table",
up.column_name "Referencing column"
from all_cons_columns up
join all_cons_columns r
using (owner, position), (select r.owner,
r.constraint_name fk,
r.table_name table_fk,
r.r_constraint_name r,
up.table_name table_r
from all_constraints up, all_constraints r
where r.r_owner = up.owner
and r.r_constraint_name = up.constraint_name
and up.constraint_type in ('P', 'U')
and r.constraint_type = 'R'
and r.owner = 'OWNERNAME') aux
where r.constraint_name = aux.fk
and r.table_name = aux.table_fk
and up.constraint_name = aux.r
and up.table_name = aux.table_r;
-- + Dynamic SQL
If anyone has any suggestions and / or reuse code to me thank you very much!
After resolving this standoff intend to mount the inserts in utl_file by a table and create another program to read and play in the development environment.
Thinking...
Let's Share!
My thanks in advance,
PhilipsThanks, Peter.
Well, I am working with release 9.2.0.8.0. But the planning is migrate to 10g this year. So my questions are:
With Data Pump can export data just from tables owned for me (SCHEMAS = MYOWNER) parameterizing the volume of data (SAMPLE) and filters to table (QUERY), right? But parameterizing a contract table QUERY = "WHERE status NOT IN (2,6) ORDER BY contract ":
1º- the Data Pump automatically searches for related data in other tables in the owner? ex. parcel table has X records related (fk) with Y contracts not in (2,6): X * SAMPLE records will be randomly exported?
2º- for the tables without relation (fk) and which are within the owner (MYOWNER) the data is exported only based on the parameter SAMPLE?
Once again, thank you,
Philips
Reading Oracle Docs...
Maybe you are looking for
-
Question in the title... Here is a video of me trying to scan and use OCR on two pages. I simply can't scan pages with the software. I bought it a few months ago in order to archive some paper documents, but I never managed to use it because Acrobat
-
PO with account assignment 'A'
Dear All, i need to restrict users to add > 1 per item for account assignment category A My scenario :- Suppose i need to buy 3 pc, each one created as seperate asset for asset master data I need to restrict users to put and accept > 1 on PO quant
-
Problem in Customer Interaction Center
Hi All, I have an issue related to CIC win client. While using the Customer Interaction Centre, enter Partner number and performs a search, the sold to party and bill to party customers brings up the incorrect details. Where should I need to check re
-
IMovie thinks that the external harddisc is a camera
At startup iMovie is telling: "camera xyz detected" and tries to scan it. But xyz is my external USB-harddisc. After e few seconds of scanning iMovie is crashing- This happens also after the 7.01-update.
-
How do I clear the scratch disk?
PS CC keeps telling me my scratch disk is too full. I don"t know where i is ti clear it out. I'm running Windows 8.