How to Export Iphone application Recorded data to PC using wi-fi ?
Hi,
I have made Iphone application.
In my application whatever data i have recorded; all that data i want to export to the Computer using the application.
Is there any way available to sent data to computer using wifi using developed application?
Can we use Bluetooth or Http connection to send application from device to the PC?
if we can than how can we manage the bluetooth and how to use it without Jailbreaking?
if any body has any solution,please give any code or any link or any other solution which would appreciated.
Thanks,
Mishal
Seen this thread yet?
http://discussions.apple.com/thread.jspa?messageID=9864422�
Similar Messages
-
I had a trouble with my lap top and had to format hard disk and install all soft ware again. could any body tell me how to transfer the application and data in my i phone back to itune.
You can't. It still thinks that your iPhone is synced with another iTunes library (the one that you had before you reformatted the hard drive.
-
How to export the text edit data to excel file without splitting the data in excel file?
how to export the text edit data to excel file without splitting the data in excel file?
I have a requirement in SAP HR where in the appraiser can add comments in the area given and can export that to excel file. Currently the file is getting exported but the comments getting split into deifferent rows.
I want the entire comment to be fit in one row.
Please help.
Thank youHi,
if your text edit value is stored in 'lv_string' variable.
then before exporting the value to excel you have to remove CL_ABAP_CHAR_UTILITIES=>NEWLINE
that is '#' from the variable lv_string.
for that use code some thing like this.
REPLACE ALL OCCURRENCES OF CL_ABAP_CHAR_UTILITIES=>NEWLINE in lv_string WITH space.
I think this will do the trick. -
Does anyone know how to get an application you had once without using App Store?
Does anyone know how to get an application you had once without using App Store?
Because I'm underage and I couldn't get it back.
I just want it back, I'm not going to use any money in App Store...When you say you "had it once", how did you get it then? The App Store has only been around for a few years, so there are lots of apps out there that you would once get from the developer, but now they're only available on the App store. Which app(s) are you referring to?
-
How can we share and transfer data at Labview using the internet
How can we share and transfer data at Labview using the internet
Dr. Eugene Berman, Moran Kamilyan and Ravit Bar[email protected] wrote:
How can we share and transfer data at Labview using the internet
Check these links:
Basic TCP/IP Communication in LabVIEW
Data Sockets
Integrating the Internet into Your Measurement System -
How to export iPhone keyboard shortcuts to iPad
Dear all,
May I check how can I export keyboard shortcuts on my iPhone to iPad?You can sync data (bookmarks, contacts, photos, movies…) of your various apple products using itunes Sync.
After installing it to your computer, connect the iOS device to your computer using the included USB cable and select it in iTunes under Devices on the left-hand side.
Then set up which items are to be synced: Click the corresponding tabs in iTunes to specify which information you want synced between the iOS device and your computer.
Sync your data.
If you don’t wanna go through all that trouble, you can use follow these step-by-step guides:
For Windows: How to transfer iPhone contact to iPad on PC
For Mac: How to transfer contact/music from iPhone to iPad on Mac
Hope they will do you a favor. -
How to export message body and data from Table to Excel from outlook 2010
I usually get Employee announcement in emails and I need to compile excel sheet from all these emails to know change in status of employee from previous line to current line .
Dear Concerned,
The change in status of the following employee has been carried out as per following details:
New Status
Change in Job
Effective Date
01-Feb-2015
Employee Name
Ricky ponting
Employee Code
4982
Designation
Sourcing Executive (Secondment)
Job Group
1A
Department
Sourcing & Supply Chain
Unit
Technology Sourcing
Division
Finance
Location
sydney
Reporting Line
Mr Micheal king
Note: Ricky Ponting was previously working as
Tariff Implementation Support Officer XYZ organization was reporting to
Mr Robin Sing
I need working code that export about HTML table data as well last Note : full line so that I can have an excel file of 2000 Employees whoes status have been changed and I can easily sort out from which previous line they were reporting to new line and I
can get in touch with the new line for any Access rights re-authorization exercise on later stage .
Currently i am using following code thats working fine with the table extraction but NOTE: line is not being fetched with the following code based on following URL
https://techniclee.wordpress.com/2011/10/29/exporting-outlook-messages-to-excel/
Const MACRO_NAME = "Export Messages to Excel (Rev Sajjad)"
Private Sub ExportMessagesToExcel()
Dim olkFld As Outlook.MAPIFolder, _
olkMsg As Outlook.MailItem, _
excApp As Object, _
excWkb As Object, _
excWks As Object, _
arrCel As Variant, _
varCel As Variant, _
lngRow As Long, _
intPtr As Integer, _
intVer As Integer
Set olkFld = Session.PickFolder
If TypeName(olkFld) = "Nothing" Then
MsgBox "You did not select a folder. Operation cancelled.", vbCritical + vbOKOnly, MACRO_NAME
Else
intVer = GetOutlookVersion()
Set excApp = CreateObject("Excel.Application")
Set excWkb = excApp.Workbooks.Add
Set excWks = excWkb.Worksheets(1)
excApp.Visible = True
With excWks
.Cells(1, 1) = "Subject"
.Cells(1, 2) = "Received"
.Cells(1, 3) = "Sender"
.Cells(1, 4) = "New Status"
.Cells(1, 5) = "Effective Date"
.Cells(1, 6) = "Employee Name"
.Cells(1, 7) = "Employee Code"
.Cells(1, 8) = "Designation"
.Cells(1, 9) = "Job Group"
.Cells(1, 10) = "Department"
.Cells(1, 11) = "Unit"
.Cells(1, 12) = "Division"
.Cells(1, 13) = "Location"
.Cells(1, 14) = "Reporting Line"
.Cells(1, 15) = "Note:"
End With
lngRow = 2
For Each olkMsg In olkFld.Items
excWks.Cells(lngRow, 1) = olkMsg.Subject
excWks.Cells(lngRow, 2) = olkMsg.ReceivedTime
excWks.Cells(lngRow, 3) = GetSMTPAddress(olkMsg, intVer)
For intPtr = LBound(arrCel) To UBound(arrCel)
Select Case Trim(arrCel(intPtr))
Case "New Status"
excWks.Cells(lngRow, 4) = arrCel(intPtr + 1)
Case "Effective Date"
excWks.Cells(lngRow, 5) = arrCel(intPtr + 1)
Case "Employee Name"
excWks.Cells(lngRow, 6) = arrCel(intPtr + 1)
Case "Employee Code"
excWks.Cells(lngRow, 7) = arrCel(intPtr + 1)
Case "Designation"
excWks.Cells(lngRow, 8) = arrCel(intPtr + 1)
Case "Job Group"
excWks.Cells(lngRow, 9) = arrCel(intPtr + 1)
Case "Department"
excWks.Cells(lngRow, 10) = arrCel(intPtr + 1)
Case "Unit"
excWks.Cells(lngRow, 11) = arrCel(intPtr + 1)
Case "Division"
excWks.Cells(lngRow, 12) = arrCel(intPtr + 1)
Case "Location"
excWks.Cells(lngRow, 13) = arrCel(intPtr + 1)
Case "Reporting Line"
excWks.Cells(lngRow, 14) = arrCel(intPtr + 1)
Case "Note:"
excWks.Cells(lngRow, 14) = arrCel(intPtr + 1)
End Select
Next
lngRow = lngRow + 1
Next
excWks.Columns("A:W").AutoFit
excApp.Visible = True
Set excWks = Nothing
Set excWkb = Nothing
Set excApp = Nothing
End If
Set olkFld = Nothing
End Sub
Private Function GetSMTPAddress(Item As Outlook.MailItem, intOutlookVersion As Integer) As String
Dim olkSnd As Outlook.AddressEntry, olkEnt As Object
On Error Resume Next
Select Case intOutlookVersion
Case Is < 14
If Item.SenderEmailType = "EX" Then
GetSMTPAddress = SMTP2007(Item)
Else
GetSMTPAddress = Item.SenderEmailAddress
End If
Case Else
Set olkSnd = Item.Sender
If olkSnd.AddressEntryUserType = olExchangeUserAddressEntry Then
Set olkEnt = olkSnd.GetExchangeUser
GetSMTPAddress = olkEnt.PrimarySmtpAddress
Else
GetSMTPAddress = Item.SenderEmailAddress
End If
End Select
On Error GoTo 0
Set olkPrp = Nothing
Set olkSnd = Nothing
Set olkEnt = Nothing
End Function
Function GetOutlookVersion() As Integer
Dim arrVer As Variant
arrVer = Split(Outlook.Version, ".")
GetOutlookVersion = arrVer(0)
End Function
Function SMTP2007(olkMsg As Outlook.MailItem) As String
Dim olkPA As Outlook.PropertyAccessor
On Error Resume Next
Set olkPA = olkMsg.PropertyAccessor
SMTP2007 = olkPA.GetProperty("http://schemas.microsoft.com/mapi/proptag/0x5D01001E")
On Error GoTo 0
Set olkPA = Nothing
End Function
Sub DebugLabels()
Dim olkMsg As Outlook.MailItem, objFSO As Object, objFil As Object, strBuf As String, strPth As String, arrCel As Variant, intPtr As Integer
strPth = Environ("USERPROFILE") & "\Documents\Debugging.txt"
Set olkMsg = Application.ActiveExplorer.Selection(1)
arrCel = Split(GetCells(olkMsg.HTMLBody), Chr(255))
For intPtr = LBound(arrCel) To UBound(arrCel)
strBuf = strBuf & StrZero(intPtr, 2) & vbTab & "*" & arrCel(intPtr) & "*" & vbCrLf
Next
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objFil = objFSO.CreateTextFile(strPth)
objFil.Write strBuf
objFil.Close
Set olkMsg = Application.CreateItem(olMailItem)
With olkMsg
.Recipients.Add "[email protected]"
.Subject = "Debugging Info"
.BodyFormat = olFormatPlain
.Body = "The debugging info for the selected message is attached. Please click Send to send this message to David."
.Attachments.Add strPth
.Display
End With
Set olkMsg = Nothing
Set objFSO = Nothing
Set objFil = Nothing
End Sub
Function StrZero(varNumber, intLength)
Dim intItemLength
If IsNumeric(varNumber) Then
intItemLength = Len(CStr(Int(varNumber)))
If intItemLength < intLength Then
StrZero = String(intLength - intItemLength, "0") & varNumber
Else
StrZero = varNumber
End If
Else
StrZero = varNumber
End If
End FunctionDear Graham
I am already big fan of yours and using mail to many Addin from years from word 2007 to Word 2010 :) and still loving it and I use it for access re-authorization from Lines for application accesses . I tried and finally got understanding of the Extract to
mail Addin and after tweaking excel - Text To columns and other few things finally i was able to get the required data - from morning to now :) I am happy to see your provided guidance
Thanks alot - by the way why your Mail to many add-in is so slow now these days :) previous versions usually help me send 1000 emails in 10 minutes now it takes long time :) -
How to export a continous waveform data from a while loop?
Hello there,
I need to add noise signal to my waveform which is read from a binary file. I use noise generate vi (deleted the density part) from NI example as my sub VI, and put it into a while loop in order to get the continous noise signal, but I don't know how to export this data. There's no waveform come out from the noise waveform output tunnel (on the while loop). I used output tunnel, didn't work, tried shift register, didn't work... Can anybody help?
Also, how to fix the dt problem for the noise generate vi and my original data ( from binarty file)
Thanks in advance!
Wendyhi
I think notifier can do the trick (an example is shown in the master-slave template).
Another possibility can be a FG (or action engine, look for the nugget ActionEngine, it will change your LV-coding life !)
N -
How to export mail message body data detectors information, not address bok
Is there anyway to export Apple mail's "data detectors" information within the message body other than to the address book? I don't want to export the other non detector information contained in the body of the message. I would also like to include From, Subject and Date. Preferably the export result would be in a organized comma format.
Any suggestions?
Thanks in advance.James,
Two routes to try come to mind, the first being Applescript. Mail is obviously "aware" of the info contained in the detectors, and of course it knows all about what is contained in the header. You can probably use Applescript to extract the desired data, placing it in a Text Edit document. It has been some time since I haves used Applescript myself, so I won't be much help in guiding you. Regardless, you would need to teach yourself how to use Applescript, even with assistance.
The other route to take would be to drag these emails out of Mail to the Finder, creating standard text files. You could then handle them in one of the command line text editors- scripted, of course- to extract and format the needed data. Again, this is something you'd need to explore on your own.
Since these messages all have the same formatting, it is simply a matter of identifying the data you need, then placing that data in a properly formatted text document. Generally speaking, this is part and parcel of what both Applescript be text editors do.
Scott -
How to export the single cube data from SAP repository
Hi ,
I have a requirement to export the single cube data ( there was so many cubes in the SAP repository) as an XML file or a .csv file or a flat file.
And also looking for how to do cube quering?
Thanks in advance ,
Ramakrishna ThotaHI RK,
1. You can use Open Hub service to export data into CSV or File Format.
2. You can also use RSCRM_REPORT transaction to export data in to File, for this you need to create query first.
3. You can also use APD to generate file of your cube data.
thanks
Ramesh Babu -
How to sign iPhone application using developer certificates
Hello,
will anyone tell me that how to sign the iPhone application using developer certificate and one more thing that how will i get the developer certificate.
Thanksya i got the solution, just go through the following link...
you will also know how we do that..
http://developer.apple.com/iphone/library/documentation/Xcode/Conceptual/iphonedevelopment/120-Running_Applications/runningapplications.html
http://developer.apple.com/iphone/library/documentation/Xcode/Conceptual/iphonedevelopment/128-Managing_Devices/devices.html#//appleref/doc/uid/TP40007959-CH4-SW38 -
How can deploy the application and data to client?
As I know, I can burn a CD with http://mobileserver/setup/webtogo/setup.exe and distribute this CD to client to install web-to-go Client.
But how can I create a package for client to install my application and data?
What tools should I use? Where can I get the information?
Can you give/show me a simple example to make a package and install the package?
Thanks a lot.Only the carrier to whom the device is locked can unlock it.
StraightTalk is not a supported carrier... not all features may work. -
Right now I am working on a data communication programme. The time of reading digital signal and recording data is more than I expected, which is about 100 microsecond. I need to reduce the time. The software I am using is Visual C++ 6.0. I use two DAQ boards, which are PCI-6024E and PCI-MIO-16E. I have set the priority of Visual C++ to be realtime by task manager. The operating systme is Windows XP.
I am wondering how to set the interrupt of reading or writing data to be the highest and stop any other kind of interrupt.
Thanks in advance!The primary limitation you will encounter when trying to do high speed
digital I/O using your E-Series hardware is that the digital lines are
all software timed. This means that for each and every digital
read it is necessary for your software to issue a command to your
hardware, read a single point, then receive the response from the
board. This prevents you from performing digital operations at
very high speed. In general, I would say that 100 microseconds is
a very good response using software-timed digital I/O on a Windows
computer.
It is difficult to make a good recommendation without more detail about
what you are trying to do. You may need to consider switching to
a Real-Time operating system, or upgrading your DAQ hardware to a board
that will allow you to time your digital acquisitions on the board
itself. These devices, such as the m-Series DAQ or the PCI-653x
series, would allow you to use hardware triggers for your digital
acquisitions, change detection, and buffered data acquisitions to
reduce the software overhead involved in a rapid acquisition. -
How to export iPhone contact to yahoo contact
Hi,
I am Hitesh Motee please guide me to export contact(address book)
from my ios device to yahoo contact
thanx
Hiteshhttp://www.instructables.com/id/How-to-export-contacts-from-iPhone-to-PC-Outlook /
-
How to hide iPhone applications from Family Share?
How do you hide an iPhone application in Family Share? I am able to hide applications on my iPad by swiping right-to-left and selecting Hide, but that does not work on my iPhone. I’m running iOS 8 on an iPhone 5s.
Family members can hide content, which won't be shared
If a family member wants to prevent other family members from seeing something that they have purchased they can hide their purchase. Content that has been hidden by a family member will not be shared with other family members. You can hide content on an iOS device or iTunes/App Store/iBooks on OS X, for example in the App Store on an iOS device you simply navigate to the Purchased tab and swipe on something you want to hide and press the 'hide' button.I have an iPhone 4s running iOS 8 and was able to hide an iPhone app by going to App Store:Updates (bottom right):Purchased:My Purchases and swiping left on an app to show a red HIDE button and selecting it. Unhiding the app requires going to the iTunes store on your Mac or PC and unhiding it (see iTunes Store: Hiding and unhiding purchases).
Maybe you are looking for
-
Running the latest version and most current update of snow leopard. Have 250 GB on computer. Have Intel core I7 2.66 Ghz processor. My computer is about 2 yrs. old. So processor and memory are not an issue. I want to upgrade to Lion, but cannot do th
-
I have a Mac leopard. Did a recent recommended update. When it finished,I restarted then a window came up to enter Master Password. I don't know what it is and when I try to enter one, the window shakes so I am unable to use computer at all.
-
Firmware update to 1st generation Ipod touch
Any suggestions on updating my 1st generation iPod Touch? I bought the update on iTunes but it won't let my computer won't let me update it to iOS 3.1.3 from iOS 1.1.5
-
Hi, What is the report/Query should be used to extract the output of invoices which are outstanding as on date. e.g. if I want to see the information of what are the outstanding amount as on 31st March,2010 then which report/query will provide the sa
-
Notification option in settings
So I just activated my iphone 4 and I don't have the notification option in settings. The phone was ordered online and it was unlocked. Please assist. everything i find online relates to jailbroken iphones. I would greatly appreciate any insights. Oh