How to export multiple separate tracks as one song from Logic to iTunes?

I know how to export the separate tracks that i have recorded, but i want to be able to save all of the tracks into one song, in other words, i want to be able to take my recording from logic 8 and export the entire thing, not just separate tracks, into a file that iTunes can read. Any help/suggestions?

Select "Bounce" (upper right part of Logic arrange window) and make sure MP3 is check under "Destination". This will cause all tracks to be written to a single MP3 stereo file. However, if you have any tracks muted they will not be included in the bounce. Also, make sure no track is "Solo" else you will only get THAT track.
I am assuming that you have mixed all the tracks and done any "mastering".
Once the MP3 file is generated just drag it into iTunes, right click on the song, and then select Get Info and the "Info" tab to assign Artist/Album/etc.
It is very easy......

Similar Messages

How do you export a drum track to Music XML from Logic Pro

I have a song in Logic Pro with a compound drum track that consists of a Drummer subtract as well as a manually written drum track using the same kit (for specific fills and kicks) as well as a drum line with auxilliary percussion. I kinda figured there was no way to combine the subtracts, so I am OK exporting each to Music XML separately (although if someone knows how to combine, I am all ears). I created a new software instrument using the same drum kit as the Drummer track and options-dragged the Drummer track to the new software instrument to convert it. However, when I view the Score Editor window for ANY of the three drum tracks, it does not come up in drum notation, but in bass cleff. The Style is blank and I don't know how to change it to drums.
I want to export to MusicXML to give my drummer music, so I am exporting this to Musescore.
Does anybody know how to export drum tracks properly? I am using Logic Pro 10.0.7
Thanks in advance!

Thanks for the quick response!
I got the Join part, but when I look at the Score view for the song below I don't get the characteristics editor your screenshot shows (see attachment one). However, I can pull this up if I select on the regions in the track I want and select Window -> Score Editor. However, under Style, I can select the pulldown with a bunch of pre-defined options, non-of which are "#Drums". How does one put #Drums into the Style field (see second attachment)?

How do i upload ONE song from my pc itunes library to icloud?!!!!

Hi,
I just recently imported a song from a cd to my pc into itunes. I need to access it on another one of my Ios devices. The status of the icloud status of the song in itunes on my pc says waiting. Does anyone know how to upload that one particular song to icloud for access on my ios devices?
Thanks!
PLEASE HELP!!!!!

Hello there mmmnl5,
You may need to quit iTunes, perhaps restart the computer and use the Update iCloud function outlined here.
Some songs appear to be missing from iTunes Match
Songs purchased from multiple Apple IDs
Songs containing DRM (Digital Rights Management) may not appear, or may appear grayed out in iCloud. This can occur if your computer is not authorized for playback of that content. Try authorizing your computer, then manually update iTunes Match.
To determine what Apple ID your computer needs to be authorized for, locate and select the song in your iTunes library.
Choose File > Get Info.
In the Summary tab, locate the Account Name field in the right column and write it down.
Click OK.
Choose Store > Authorize this Computer.
Type in the account name from the Summary field and its password. Click Authorize.
Choose Store > Update iTunes Match.
From: iTunes Store: Troubleshooting iTunes Match
http://support.apple.com/kb/ts4054
Since your computer is already authorized you can skip that part.
All the best,
Sterling

Help, How to export multiple mono tracks?

I have eight tracks of master audio that has been captured to FCP with the video. I have sent the timeline to soundtrack to create individual mono timestamped BWF for each track (very important).
I have each of the tracks submitted to submixes. When I play the timeline you can see that each track has distinct audio assigned. Now when I export, telling the program to export all submixes, it only puts audio on tracks one and two. It is however creating 8 wav files.
Now here is the odd thing, it was working for the first 4 day of the shoot. Now it has decided to crap out. Was I just getting lucky before, and if so. What settings should I have to achieve what I need.

Yes, we are. The problem is unique, meaning that when we try aiff exports the full 8 channels right properly. But wav files don't only right the first two. We need to use wav since the tracks will be going to pro tools for the conform and mix.

How to handle multiple threads to read one line from a file each time?

Dear Sir or Madam,
I'm new to multiple threads java programming. What I want to do is as following:
1. I'm writing a program to read one line of text from a very large file, and then do some process on this one line of text, then read the next line of text from this file, then process on this line of text, ...... When reach the end of the file, close the file.
This is a single thread scenario.
2. To fullly untilized computer resource, I want to create multiple threads to process this large file.
One thing is very important is that each line of text in the large file has to be read sequentially. This means that the first line of text in the large file is read first, then the second line, then the third line ......
My question is that if I create multiple threads to process the same file, how can I make sure that different threads will read the line of text from the same file sequentially?
I don't have enough experience on java multiple threads programming, so it will be very appreaciated if you can help me on this as soon as you are available.
Thanks and regards,
Steven Wu

A better solutoin would be to have a single thread that reads each line an puts it into a queue, and then multiple threads reading from the queue to process these lines.
This will only be effective if the amount of processing to be done on each line is very large compared to how long it takes to read the line, or if you have more than one CPU on your machine.

How do I record separate tracks through my Mixer in logic?

Hello All,
I am trying to record two seperate instruments at the same time into logic through my Xenyx Q502 USB Mixer so they are recorded on two sperate tracks (one track for microphone, the other for guitar) but am struggling as to how to do this. I have the Microhone in input one and the guitar in input two on my mixer. The problem that arrises is that both of these inputs record on the same track in logic and are not recorded as indivudal tracks. How do I make them record as indivudal tracks?
Thanks,
T.Hobbs.

TryfanH wrote:
Hello All,
How do I make them record as indivudal tracks?
Thanks,
T.Hobbs.
Stop recording on a stereo track!
Record on two mono tracks, one set to Input 1, the other set to Input 2
http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=39%26se ction=5%26tasks=true
You might want to go here and read.... "Exploring Logic Pro"
http://documentation.apple.com/en/logicpro/

HT204406 I cannot download one song from iCloud in iTunes.

All other songs are fine! It could be a corrupt file - but how did it get matched and uploaded in the first place?
This is for iTunes on both Windows and Mac.

When you delete the local track are you removing the original and the listing from iTunes.
Express Lane

How to join two or more separate tracks into one track

I have a CD of music that I want to import. It is a study tool so all the tracks are parcelled up for easier examination- i.e. Beethoven's Symphony no. 5 in C Minor is not one long track, it is cut into 28 separate tracks ranging in time from 26 seconds 2:31 (minutes).
What I want to do is make all 28 tracks into one track so there is continuous play. I've tried the gapless album option. It didn't do the trick. Now I can just select continuous play button, but for things like 'party shuffle' it doesn't quite work - you end up with a 30 second blurb of a song.
Any suggestions?

Insert the CD.
Select the songs you want as one track then menu Advanced -> Join CD tracks, then import the CD.

How to delete multiple music tracks

how to delete multiple music tracks?

I think rendering the audio has to do with the way I import to FCE. This is how I bring video into FCE because it seems to be the only way I can get it to work. I run my video camera through a digital coverter which runs a firewire into my Mac. I then import the video into imovie. After that is done, I do a drag and drop of the imovie into FCE. I have to render the audio because it just beeps if I don't when I play it back in FCE. I tried using the video capture in FCE but it keeps telling me it is unable to capture (my gues is the cameras are too old and the digital converter in not compatable with FCE or Mac). So once the video and audio footage is in FCE, if I click the green button on the left hand side, my rendered audio becomes a red line. However, I can click the same button on the upper video portion, and it drops the video out so I can see video clips on the lower levels and not just the first one on top. So that's why I render the audio. I can see all twelve audio tracks already. Tom- would making the change you suggest still help? Great book by the way also.

HOW DO I MAKE SEPARATE TRACKS????

I am a toddler teacher and I am trying to make a CD of the songs that we sing in the classroom. I recorded each song as a separate track but when I send it to itunes to record onto a CD it stays as one last track. PLEASE HELP!!!

solo each track before export (press the little headphone icon)

How To Install Multiple OBIEE Instances On One Linux Machine

Hi,
OS: Red Hat ES 5.2
OBIEE : 10.1.3.4
We one development server(Linux) where one OBIEE 10.1.3.4 was installed with os user as 'ora1a' (Deployed on Oracle Application Server 10.1.3.4)
and now I have installed OBIEE 10.1.3.4 on same Linux Server with different user(ora2b) and different mount point (Deployed on Another Oracle Application Server 10.1.3.4 )
But My OBIEE was not working and I came to know that only one can be working by default.
After following few notes i have update NQSConfig.inc and odbc.ini with different ports ie from 9704 to 9725 and bounced BI server and presentation server
But still its not working can any one tell me what are all needs to update to make it work
Thanks in advance
Regards,
Bhanu Chander
Reference's i used: HOW TO: Install Multiple OBIEE Instances On One UNIX Machine (Doc ID 605582.1)

Hi
I was not much clear about what you are telling
See my first OBIEE instance URL is http://hostname18.oracle.com:7777/analytics (As i deployed OBIEE on Application server 10g(OAS1))
and second one is http://hostname18.oracle.com:7778/analytics (As i deployed OBIEE on another Application server 10g(OAS2))
Also My port for first OBIEE instance is 9704 and second one is 9725(Which i changed to this)
Now tell me what are all i should update
Thanks,
Bhanu Chander

How to keep multiple function modules under one Web service

Hi Experts,
I have Three RFC function modules and i need to create one web service for these three RFC function modules. I know How to crearte a web service for one function module.
please suggest me How to keep multiple function modules under one Web service.
Thanks in advance
Lakshminarayana

Hi Lakshmi,
The best way to do it is to assign all the three RFC Enabled FM's to one function group. Later on the top menu in Utilities you get an option to Create a Webservice from a Function Group.
You can create one single Webservice using all the the 3 FM's.
I hope this helps.
Thanks,
Manu

How to setup multiple base station under one network?

How to setup multiple base station under one network? I have 6 rooms but one airport base station makes really difficult to get good signal from every rooms. I wonder if I can setup multiple airport base stations talking to each other under the same network to build up the signal strength will help solve this problem. But, is it possible? How?

One route would be to utilize a "roaming" network. In a roaming network, you would connect multiple AirPort Extreme Base Stations (AEBS) to the same Ethernet. Of course, this would require that your home is already wired for Ethernet.

Multiple MIDI tracks to one instrument?

The plugin is Ultrabeat.
I like putting the kick onto one MIDI track
the snare into another MIDI track,
hats on another, etc....
Problem is, all of the MIDI tracks that route to the Ultrabeat
are the actual instrument track that has the plugin inserted onto it.
So MUTING one track mutes all the audio coming out of
the Ultrabeat Instrument track.
An attempt at a workaround is: create a Multi-instrument
in the Environment, and connect it to the Ultrabeat.
But then MUTING the MIDI tracks doesn't do anything.
The MIDI tracks play even when MUTED.
So I'm guessing Region Muting is the way we do it?
Selecting individual regions for muting and solo-ing
instead of muting and soloing the track ?
So..the MUTE button on a MIDI track is there for...NO REASON.
It's just a button that doesn't do anything.
Well.. this MIDI track has muted and non-muted regions on it.
I guess I'll need to remember which ones are muted and which
are not ?
This couldn't possibly have been something that was thought over
and planned.
Nobody in their right mind would design it this way on purpose.
A solution would be to allow MIDI tracks to be MUTED using the 'M' button

Are you talking about MIDI track on external MIDI?
your question seems to be related with Instrument tracks...
there many Muting possibilities in Logic...
I suggest to read the manual serch for "mute track"
As you can see in the manual there are tons of pages and paragraphs about MUTE function in Logic Pro... so I cannot explain all the way to MUTE a Midi or Audio
I can only say that Instruments tracks are not the same as External MIDI track device... *but Muting Instrument track is very similar as Audio and Midi mixed together functions*
'cause the Instruments channels strips are AUDIO CHANNELs STRIPs!
Maybe the following pictures can help
Try to change setting with the one shown below
CPU-savings is not the correct therm and maybe this is caused of misunderstanding...
this set allow you to individually mute the duplicate tracks...
_+The "M" button that you are metioned in your post will works as you need.+_
I'm trying to replay to the O.P question
multiple MIDI tracks to one instrument?
if you need to mute individually tracks of a single instrument the last pictures shows the best setting to achieve the result that you are looking for.
G

How to export all the views in one schema?

Hi,
I have more than 1000 views in one shcema.
How to export all the views in one schema?
Amy

Hi,
It's not a very easy question, I have develop a script wich create a script to create view from old database to new database :
/* &1: Oracle SID Source
/* &2: Oracle Schema Source
SET HEAD OFF
SET VERIFY OFF
SET PAGESIZE 0
SET LONG 40000000
SET LONGCHUNKSIZE 2000
SET LINESIZE 2000
SET FEEDBACK OFF
CREATE TABLE RECREATE_VIEW(VIEW_NAME VARCHAR2(30), TEXT LONG);
/* Selection du texte de la vue */
DECLARE
w_text long;
w_text_debut long;
w_text_column long;
w_view varchar2 (30);
w_schema varchar2 (8):='&2';
CURSOR w_cursor IS
SELECT a.view_name, a.text
FROM dba_views a
WHERE a.owner = w_schema;
CURSOR w_column IS
SELECT DECODE (ROWNUM,
1, 'CREATE OR REPLACE FORCE VIEW ' || '&' || '1..'
|| a.table_name || chr(10)
|| '('
|| a.column_name
|| DECODE (ROWNUM, nbcolumns, ')' || chr(10) || 'AS' || chr(10), ',' || chr(10))
FROM (select column_name,table_name
FROM dba_tab_columns
WHERE owner = '&1'
AND table_name = w_view
order by column_id ) a,
(SELECT COUNT (1) nbcolumns
FROM dba_tab_columns
WHERE owner = '&1'
AND table_name = w_view
GROUP BY owner, table_name) b
order by rownum;
BEGIN
OPEN w_cursor;
LOOP
FETCH w_cursor INTO w_view, w_text;
EXIT WHEN w_cursor%NOTFOUND;
w_text_debut := NULL;
w_text_column := NULL;
OPEN w_column;
LOOP
FETCH w_column INTO w_text_column;
EXIT WHEN w_column%NOTFOUND;
w_text_debut := w_text_debut || w_text_column || ' ';
w_text_column := NULL;
END LOOP;
CLOSE w_column;
w_text := w_text_debut||w_text||';';
insert into RECREATE_VIEW(VIEW_NAME, TEXT) VALUES (w_view, w_text);
COMMIT;
w_text := NULL;
w_view := NULL;
END LOOP;
CLOSE w_cursor;
END;
SPOOL scripts_views_&1..sql
PROMPT SPOOL scripts_views_&1..log
PROMPT
SELECT TEXT
FROM RECREATE_VIEW;
PROMPT
PROMPT SPOOL OFF
PROMPT
SPOOL off
PROMPT /* Formattage du fichier SQL */
!sed 's/[ ]*$//' scripts_views_&1..sql > aprilia.tmp
!rm scripts_views_&1..sql
!mv aprilia.tmp scripts_views_&1..sql
DROP TABLE RECREATE_VIEW;
EXIT
I hope that help you.
Nicolas.

How to export multiple separate tracks as one song from Logic to iTunes?

Similar Messages

Maybe you are looking for