How to export output to Excel (or file that can be opened by excel).

Hi,
Have just installed SQL Developer.
Have entered an SQL statement and Executed the Statement. Now I want to save the result in Excel. But I cannot find a way to save the result. When I choose to save I only save the SQL statement.
Please advise.
Thanks,
Anja

Found it!
Just do a right click somewhere on the statement or output and export as csv.
Anja

Similar Messages

  • How do I burn a CD or DVD that can be opened on a Windows PC?

    How do I burn a CD or DVD that can be opened on a Windows PC?
    Here's what we tried - and none of this worked when we tried the CD and DVD at our local library on their Dell, Compaq and IBM PCs.
    1. We have 11 documents composed in Word (2004) in .rtf format with many, many photos embedded. The documents are in a folder.
    We first created a disk image of the folder using Disk Utility: File> Create image from folder. Once we had the .dmg which was about 1.16 GB we burned this onto a DVD choosing no compression and no encryption. This DVD worked fine on the MBP but it wasn't even recognized by any of the PCs at the library.
    2A. We tried to compress the folder to burn it onto a CD. In DU, by choosing compression with no encryption we reduced it to about 530MB. For some unknown reason when we tried to burn this onto a CD using DU, we got the message that the CD didn't have enough space. It is a 700MB CD so that made no sense - does anyone know why this would occur?
    2B. So, we went to the Finder to use its burn option. We were able to put the 530MB compressed folder which we created in DU onto a CD using the Finder. Again, this worked fine on the Mac. At the library this CD was recognized by the PCs, but Word couldn't open it. Once we got a message that it was too large to be opened (bigger than 32MB!) - the librarian did not recognize this as a default that they might have set. Mostly, we got the message that Windows could not open the document.
    What should we have done? What should we do to achieve this? I know there must be a way.
    Mrs H

    K Shaffer wrote:
    The .zip file created by File> Create Archive in the Finder menu bar, would suffice;
    but if traveling as far as India, you could consider taking along a USB flash memory
    dongle with the file(s) on there as backup to the one you put on a DVD or CD media.
    Thanks for the extra info, K.
    This sounds like a good idea, but the CD is a gift for a friend in India and presenting him with a flash drive just won't be the same. (Although I suppose we could take the drive with us and burn something there - but that's too risky if it fails on the ground and besides, what we'd have on the drive would be Mac created, unless you have an idea on how to get around that - DU DVD/CD master? convert?)
    {Little space is gained by putting a .dmg file inside a .zip file; I've checked with some
    of mine and often it isn't really a deal maker to add a step in this process.}
    The original folder as a dmg was 1.16GB too big for a CD. As a compressed file done in DU it was about 530MB and as a zip it is 450 or thereabouts. The files are on the MBP and I am on the G4 now and it is not turned on.
    The fairly easy to use application the link takes you to, has almost no learning curve.
    It will not compress an item, but you can easily; to include putting items in folders and
    then use Create Archive to make them one package...
    The Burn 2.3 utility makes Mac+PC compatible disc recordings, in DVD and CD media.
    The simple interface is why it is handy. Otherwise, one could probably get by with the
    other methods which are native to the Mac; through other steps...
    I'm not sure what I am gaining at this point in time by doing this - if you both think archive (zip) and burn from finder will work.
    This does sound like something we can definitely use in the future, thanks.
    Mrs H

  • Max number of files that can be opened in harddrive through AEBS?

    What is the maximum number of files that can be opened in a external hard drive (Lacie 500 GB, USB 2.0) connected through the AEBS? Looks like there is a limit.
    When I am trying to 'seed' files through a bit-torrent client (Azureus 2.5.0.4) many of them give an error "Error: too many open files". I never had this error before.
    When I tried to delete a file in the hard drive, I got the error "too many open files". Then I stopped 'seeding' in Azureus and I was able to delete the file.

    Thanks Chris,  it has almost become unwieldy now at this stage ... I'm actually thinking of calling another template for certain sections
    I belive this is possible..

  • Is it possible to embed a file that can be opened with another app in IBA?

    We're making a music instructional book and would like to "embed" a .tef file that can be opened by the free tefPad reader:
    https://itunes.apple.com/us/app/tefpad/id517830471?mt=8
    I don't think it is possible, but wanted to see if there is some trick we haven't found.
    Thanks much for any insights.

    Check  the iBooks Author,      > Help  > Media and Graphics and  / or if you an iTunes Connect account, open and > > Deliver your Content on the right of  some  of the options are links to a number of PDF, Asset Guides, Formatting guides etc,.
    iBooks Authur has a few  widgets and  there are  many thrid party widget  makers online such as Bookry, who  may also be able to create what you want if its technically possible - at a price.

  • Create a PDF file that can be opened in PS

    Hello,
    I a cartographer that is creating a map with thousands of contour lines (among many other layers) in .ai.  Unfortunately, I can't open this map in PS.  PS will think for upwards of 10 hours trying to rasterize this file (and at that point it was about 1/100th converted).  If I turn the contour layer off, PS can open/rasterize the file in a matter of minutes.
    My goal is to open this .ai file in PS and then save it as a .tiff for printing. Does anyone know how to go about doing this?  FYI, I have opened this file in InD and exported it as a PDF, but PS can't open it either.
    Thanks,
    kru

    Hello Larry,
    I have an information plug-in that gets a little more specific.  In all I have 850,000 verticies (2 points and a connecting line segment) which equates to about 5,250 paths.  I can't simplify too much, however, I have simplified the paths 5 x at 99%.  If I try to simplify at just 95% my contour lines will not line up with my streams and valleys.
    Do you know the maximum amount of verticies that can be handled?
    Thanks,
    kru

  • Why Adobe Reader XI cannot open a pdf file that can be opened with Reader 9?

    Why Adobe Reader XI cannot open a pdf file within a browser that can be opened with Reader 9?

    Hi Steve,
    Sorry, I cannot post a URL to the file because it is for intenal use only.
    I noticed that the pdf file can be opened outside of IE browser if I disable the Adobe Reader add-on (active-X) in IE browser. If I enable the Reader add-on, the Reader cannot complete the file download. The progress bar goes in a half way, and stays there.
    Just FYI, the pdf file was created by Distiller 7. Do you think it is the issue of Reader add-on? Thanks.

  • Max files that can be opened

    hi,
    i am getting an error "Too many files open".
    I am closing the streams i dun want but just that I have to open many files.....
    what is the max number that can be opened? is there any way to increase this number?
    thanks

    is there anyway to increase this upper limit?
    i'm on win2k on a P4 machine.... I am using WordNet Java interface and it opens up a new file everytime I have to find a synonym (and i'm doing it recursively).....
    or any alternative to WordNet?

  • How can I increase the number of .pdf files that can be open at once from 20?

    I like the new integrated pdf viewer in Firefox a lot because I'm constantly browsing datasheets at work. However, it seems to have a limit of 20 simultaneous files. The machine I'm working has no danger of running out of memory any time soon, so is there a setting I can change to increase this limit?
    Thanks.

    hello michael, this limit is not directly related to pdf-files in the internal viewer, but you can try the following to work around the issue: enter '''about:config''' into the firefox location bar (confirm the info message in case it shows up) & search for the preference named '''dom.workers.maxPerDomain'''. double-click the preference and set it to a higher value.

  • Zip a file that can be opened with winzip

    I have a bit of a problem in finding a solution, to how to I compress a file and open it again with winzip?? PLease can anyone help me!?

    Here is an abap implementation of gzip / gunzip. Enjoy.
    If you find it useful, please post a followup. The same goes if you find bugs, or make any improvements. As usual without any warranty, use at your own risk.
    It is useful when you need to upload hughe file with gui_upload.
    [SCN Wiki GZIP|http://wiki.sdn.sap.com/wiki/display/profile/GZIP]

  • How to export report to excel and to text file in previewer

    How to export report to excel?
    And, it takes long time for generate report to rtf or pdf file in previewer.
    How to speed up the process? or, it's better generate report to text file directly by Run_product?
    Please help!

    You can generate report to tab delimite format that can be imported to excel.
    As for the performance question, because reports can't specify what format when you run against previewer, so I don't know what previewer you are talking about. Generate to file is always faster than to your application previewer (assume) because you have one more step after output generated in the file: read from file and render it. Depends on the render and size of the output, it may have significant performance difference.
    Thanks,
    -Shaun

  • How to Export multiple photos from pdf files?.

    Good day.
    How to Export multiple photos from pdf files?.
    Thanks.

    Hello
    how to reach from file menu ?.
    Running Adobe reader 9 version 9.3.0
    Thanks again.

  • Hello! I was just wondering how to export a movie in quicktime so that it is playable on the sony psp. Thanks in advance Tom

    Hello!
    I was just wondering how to export a movie in quicktime so that it is playable on the sony psp.
    Thanks in advance
    Tom

    I assume all is rendered at 100% and you Mixed Down (in the Sequence Menu).
    It sounds like it may be one of those quirky things like a key stroke character used in the file name that OSX doesn't like.
    Al

  • How can I import a movie into iMovie 09 from a hard drive?  The movie will open and play in idvd but breaks into separate files that can't be downloaded when I try to import.  Can it be done?

    How can I import a movie into iMovie 09 from a hard drive?  The movie will open and play in idvd but breaks into separate files that can't be downloaded when I try to import.  Can it be done? I am trying to create a disc of player highlights for a collegiate coach, and I am using movie files downloaded to my hard drive from a DVD created on a PC. 

    No unfortunately it won't open in quicktime either.  It does the same thing that Imovie does, separates it into two file folders audio and video, and if i select video it opens to reveal 8 files that cannot be selected.  VIDEO_TS.BUP, VIDEO_TS.IFO, VIDEO_TS.VOB,VTS_01_0.BUP, VTS_01_0.IFO, VTS_01_1.VOB, VTS_01_2.VB, VTS_01_3.VOB.  All of which cannot be opened or selected.
    Opening it in Idvd and folllowing your suggestion works and I get a format code of NTSC.  Is that the same?  Thank you for your time and response.
    CaCanuck

  • I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?

    I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?

    Hi, I'm helping StringSinger2 with this problem.
    The previously installed version is Pages 3.0.3 (the same as from iWork 08). This version (Pages 3.0.3/iWork 08) is incompatible with Pages 5.
    That is why it would be helpful to install iWork 09, which is the version between the two. It will open the older 08 files, and its saved files are readable by the new Pages5.
    SO...
    When I try to install iWorks 09 from my retail DVD the error message is "the installer is damaged". (I know the dvd is good, I installed iWorks09 to my laptop today.) Is the "installer" part of the system files? And - If that is damaged is there a patch for that?
    Many Thanks!

  • How do you change the program ALL files of a type open with?

    Hello. I run Parallels Desktop for Mac on this system. Since I upgraded to v3, OS X wants to open my Mac Word/Excel/Etc... files using the MS Office installed in windows XP from PD. I don't always have PD running, and do not want it to start up to use the programs on it. I know, not a Mac problem... But, my question is this:
    Is there a way to change the program that ALL files of a certain type (ex: pdf, doc, txt, etc...) will start? I have tried the OPT+RT CLICK which says to ALWAYS open this file with xxx.... but that only flags that single file. I want every file that I ever open anywhere on my system/network to use the program I specify. This is simple to do in Win XP, and I'm guessing there's a way to do it in OS X.
    Help/information appreciated.
    Thank you,
    Scott
    MacPro Quad Xeon 3.0GHz   Mac OS X (10.4.9)   16 GB RAM - 1TB Internal RAID1

    Well, with the program Onyx, I've found that LaunchServices database is the culprit. To fix this I just pick a type of file I want to change. Right click the file, choose get info, and change the program it opens with, then click the change all button. Done!
    Cool.
    Scott

Maybe you are looking for