How to export selected slice..

how i can export different slices, without loosing the
root??. Because for each export, i must browse my pc to find the
folder where the files are.

sabcinia wrote:
> Yes. I first export normally to that location... but
then, when i continue with
> the rest of slices, i must browse again. i don't know
why. i only find a way to
> do it. I change de name of the folder where the .png is
located, and open again
> the file, and then export the slices. if i don?t change
the name, i can't keep
> the root.
What version of Fireworks?
St�phane Bergeron
reach : connect : communicate
http://www.webfocusdesign.com
blog : tutorials : articles : gallery
http://www.pixelyzed.com

Similar Messages

How to export selected comments thru code

Hi,
Is there any api by which we can export selected/some comments thru code. As exportAsFDF exports all the comments of the document.
Regards,
Arvind

I believe there are plugin Apis for serializing a subset of comments. Also in Javascript
Sent from my iPad

How to export selected columns in a table using expdp of oracle10g

Hi all..
I have a table with 10 columns and i want to export only 4 columns(selected columns) data using expdp
Pl. tell me if we can do this and if yes what is the syntax.
Thanks..
Sekhar

That's not possible, you could use QUERY to specify where clause but not columns in select clause,
for example,
QUERY=employees:'"WHERE department_id > 10 AND salary > 10000"'
you could use
create table2export as select c1,c2,c3,c4 from tableof10columns;and export the temp table.

How to Export Selected PageItems as Snippets (CS5/ActionScript)

I want to select certain PageItems on a page and export them as snippets. The problem is that as far as I can tell, the exportFile() method works only on PageItem for snippets. I can not make a Group out of them and export that Group, because making a Group out of the selected PageItems would make them lose their original Layer, and I must preserve their Layers.
What do I do?
TIA,
mlavie

I believe there are plugin Apis for serializing a subset of comments. Also in Javascript
Sent from my iPad

FW CS3 - how to export multiple panel headers?

Hi,
I have typical web diesign issue but it seems that it is
difficult or even
imposible to achieve with FW CS3. Maybe somebody can help me.
I have to create 2 sets of headers (title + background) for 2
graphic
panels. First set of headers (for first panel) cosist of 6
variants. Second
set contains only 2 variants. It is important to keep
position of both
groups of headers becouse background underneath them is
different and
headers are semi-transparent. Each of variant of headers is
kept on separate
frame. In this case, if 6 frames is created then 6*2=12 files
will be
exported but I need only 8. Of course I could remove
unexpected files by
hand but real project is large and number of unexpected files
is about
100!!! It is almost impossible to keep in mind what files
should be
removed.
Is any way to create as many files as I need?
Regards,
Marek

Hi Marek:
As I said in solution one, you must create a WEB sub layer.
You cannot
share a main web layer to other pages, but you can share a
web sub layer
to other pages. Select the web layer on a page and then
create a new
sublayer OF the web layer. Then choose Share Layer to Pages
from the
Layer options menu. Add your slices to that web sub layer.
Then the one
set of slices become common to all pages you choose to share
the web sub
layer with.
If you need different slice dimensions on each page, that
won't work,
and you will have to have independent slices on each page, as
you
probably do now.
As for the other risk, well, you will just have to be careful
of what
you do. Sounds a bit trite, I know, but that's all I can
think of, other
than using a new folder for those exports.
If you do accidentally export to many graphics, yuo can
always sort by
time and delete them, then re export and ensure the proper
options are
selected or deselected.
Marek wrote:
>> 1) you want to resize a slice across multiple pages
>
> Not necessarily - generarlly I would like to have access
to slice editing.
> It is hard to fit slices across pages because I can't
show on one page
> posiotion of slices placed on another one (excluding
master page slices
> which are unusefull because produces files on each page
- even on those
> which don't contain graphics for use on web page).
>
>> 2) You want to have a different number of
frames/states for certain slices
>> on different pages.
>
> The only thing I would like to achieve is to have
possibility of creation of
> unpredictable number of panel headers (customers can
request more headers in
> later time). I can't use separate slices for each
version of panel header
> because all headers looks good only particular place in
graphic design. Note
> that I want to avoid producing unusefull files which
would be generated when
> frames are used.
>
>> Solution for # 1: Put your slices on a web SUB LAYER
and share that layer
>> across the pages you want to have common slicing
for. This layer only
>> needs to be created once. Then, when you resize the
slice, it will resize
>> on all pages sharing the web sublayer.
>
> It could be solution but I can't see any option allowing
to share or not
> sublayer. Do you mean to use master page to share
slice(s) among pages?
>
>> Solution for # 2: Add your frames/states to the
pages you need them.
>> Select a slice and right-click on the slice. Choose
Export Selected Slice.
>> Deselect Current Frame only (and possibly Current
page)in the export menu.
>> Export your slices.
>
> Hmmm... this is also solution but very risky. Notice
that state of option
> "current frame only" is not remembered and I'm afraid
that one careless
> export can produce hundreds of files hard to select and
remove, especially
> when destination folder contains many other files.
>
>> This works fine in CS4 and CS3 with one notable
exception; in both
>> applications, the original slice name is ignored,
and Fireworks exports
>> the frames/states based on the page name.
>>
>> Example:
>>
>> original slice name: panel_top
>> final graphic name(s): page 1.gif, page 1_f2.gif,
page 1_f3.gif etc . ..
>>
>> I have not had time yet to try out exporting
multiple selected slices to
>> see what happens to the file names. Will try to make
time to do that
>> tonight.
>
> No no ... it works fine. The slice names are used.
>
>
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
Adobe Community Expert
http://tinyurl.com/2a7dyp
.:Author:.
Lynda.com -
http://movielibrary.lynda.com/authors/author/?aid=188
Peachpit Press -
http://www.peachpit.com/authors/bio.aspx?a=d98ed798-5ef0-45a8-a70d-4b35fa14c9a4
Layers Magazine -
http://www.layersmagazine.com/author/jim-babbage

How do I select one version from multiple stacks and export?

I have a color copy and B&W copy of 800 images. I want to export the B&W versions only. How do I select just the B&W versions in the stack at one time without having to click on 800 images?

If you check the filenames, you'll see that the versions have a version name tagged on the end, like "Version 2" when I did a quick monochrome mix of one of my own. Make a smart album with the search term set for text being "Version 2" and you should end up with all the b&w versions. That is, assuming you made them all in the same way and they're all Version 2 versions. Since the initial version would not have the term "Version" attached, you could make the search term "Version" and it would fill with all the 2nd and 3rd et al. versions.
Just a thought. Give it a try.
Mark

How to export only selected columns of WD ALV to excel

Hi,
I have WD ALV report with EXPORT button (since standard button was not working properly i just hide that and added custom one) & standard dropdown to choose layout. Out of 20 columns user may choose n number of columns, the same number of columns i need to transfer to xls. How to export only selected columns to xls. Any method or FM to filter number of columns being transfer to xls. please advise
Rgds
sudhanshu

Hi,
Where exactly we are (or going to be) using this reference i.e., CL_SALV_WD_CONFIG_TABLE. Im passing contents, filename & MIME type as:
call function 'SCMS_STRING_TO_XSTRING'
    exporting
      TEXT   = TEXT
    importing
      BUFFER = XTEXT.
WDR_TASK=>CLIENT_WINDOW->CLIENT->ATTACH_FILE_TO_RESPONSE(
**path to the word file
    I_FILENAME = 'WDP.xls'
String Variable
    I_CONTENT = XTEXT
File Type
    I_MIME_TYPE = 'EXCEL' ).
In CL_SALV_WD_CONFIG_TABLE we have few methods related to column settings however not sure where exactly we will be using this class reference. can you please give some idea so that i can do some r&d in that.
Rgds
Sudhanshu

How to pass select-option filed to Function Module Exporting Parameter

Hi,
    How to pass select-option filed to Function Module Exporting Parameter.
Thanks

Hi,
DATA: BEGIN OF ITAB5_WRK OCCURS 0,
        KUNNR     TYPE KNKK-KUNNR, "CUSTOMER #
        SBGRP     TYPE KNKK-SBGRP, "CREDIT REP
        KLIMK     TYPE KNKK-KLIMK, "CREDIT LIMIT
        NAME1     TYPE KNA1-NAME1, "CUSTOMER NAME
        SKFOR     TYPE KNKK-SKFOR, "TOTAL A/R
        AMT1      TYPE KNKK-SKFOR, "CURRENT
        AMT2      TYPE KNKK-SKFOR,                          "01-30
        AMT3      TYPE KNKK-SKFOR,                          "31-60
        AMT4      TYPE KNKK-SKFOR,                          "61-90
        AMT5      TYPE KNKK-SKFOR,                          "91-120
        AMT6      TYPE KNKK-SKFOR,                          "OVR 120
        BZIRK     TYPE KNVV-BZIRK,
      END OF ITAB5_WRK.
SELECT-OPTIONS P_COMP     FOR T001-BUKRS
SELECT KUNNR SBGRP FROM KNKK
         INTO TABLE ITAB5_WRK
         WHERE SBGRP IN P_REP
           AND KUNNR GE '0001000000'
           AND SKFOR NE 0.
LOOP AT ITAB5_WRK.
    DELETE ADJACENT DUPLICATES FROM ITAB5_WRK COMPARING KUNNR.
ENDLOOP.
PERFORM GET_CREDIT_LIMITS.
*=======================================================================
IF P_DIST NE SPACE.
    LOOP AT ITAB5_WRK.
      SELECT SINGLE * FROM KNVV WHERE KUNNR EQ ITAB5_WRK-KUNNR
                                  AND VKORG EQ P_COMP
                                  AND VTWEG EQ '20'
                                  AND SPART EQ '10'
                                  AND BZIRK IN P_DIST.
      IF SY-SUBRC EQ 0.
        MOVE KNVV-BZIRK TO ITAB5_WRK-BZIRK.
        MODIFY ITAB5_WRK.
      ELSE.
        DELETE ITAB5_WRK.
      ENDIF.
    ENDLOOP.
ENDIF.
*==============================================================
LOOP AT ITAB5_WRK.
    MOVE: 'F/S'            TO WRK-KKBER,
           ITAB5_WRK-KUNNR TO WRK-KUNNR.
    PERFORM AGING.
    ADD: W_SNFAE TO ITAB5_WRK-AMT1,
         W_SFAE1 TO ITAB5_WRK-AMT2,
         W_SFAE2 TO ITAB5_WRK-AMT3,
         W_SFAE3 TO ITAB5_WRK-AMT4,
         W_SFAE4 TO ITAB5_WRK-AMT5,
         W_SFAE5 TO ITAB5_WRK-AMT6,
         W_SFAEL TO ITAB5_WRK-SKFOR,
         W_SNFAE TO ITAB5_WRK-SKFOR.
    MOVE: 'SPEC'            TO WRK-KKBER,
           ITAB5_WRK-KUNNR TO WRK-KUNNR.
    *PERFORM AGING.*
    ADD: W_SNFAE TO ITAB5_WRK-AMT1,
         W_SFAE1 TO ITAB5_WRK-AMT2,
         W_SFAE2 TO ITAB5_WRK-AMT3,
         W_SFAE3 TO ITAB5_WRK-AMT4,
         W_SFAE4 TO ITAB5_WRK-AMT5,
         W_SFAE5 TO ITAB5_WRK-AMT6,
         W_SFAEL TO ITAB5_WRK-SKFOR,
         W_SNFAE TO ITAB5_WRK-SKFOR.
    MODIFY ITAB5_WRK.
ENDLOOP.
FORM AGING.
*CALL FUNCTION 'CUSTOMER_DUE_DATE_ANALYSIS'*
EXPORTING
      BUKRS             = P_COMP
      KKBER             = WRK-KKBER
      KUNNR             = WRK-KUNNR
      RASID             = 'FEND'
      KLIMP             = 'X'
    IMPORTING
      SFAE1             = W_SFAE1
      SFAE2             = W_SFAE2
      SFAE3             = W_SFAE3
      SFAE4             = W_SFAE4
      SFAE5             = W_SFAE5
      SFAE6             = W_SFAE6
      SFAEL             = W_SFAEL
      SNFA1             = W_SNFA1
      SNFA2             = W_SNFA2
      SNFA3             = W_SNFA3
      SNFA4             = W_SNFA4
      SNFA5             = W_SNFA5
      SNFA6             = W_SNFA6
      SNFAE             = W_SNFAE
    EXCEPTIONS
      NO-AGING_SCHEDULE = 1
      NO_TABLE_INPUT    = 2.
CASE SY-SUBRC.
    WHEN 1.
      MESSAGE E999 WITH 'PLEASE ENTER AGING SCHEDULE'.
    WHEN 2.
      MESSAGE E999 WITH 'DO NOTHING ??'.
ENDCASE.
ENDFORM.                    "AGING
Thanks

How to make a "export selection to PNG"?

Hi everyone,
I really need to export selected objects (or groups) to PNG... and I need it to be fast, i cant waste time exporting to PDF and converting in photoshop.
I made a script to do this, but the quality is soo poor... so what i want to know is:
-Is it possible to do this with the InDesign SDK?
...and if it is possible, how hard it would be?
Im not really a developer, so i want to know what i have to do, so i can ask a friend to do.... or something like that!
Thanks!
(sorry about my bad english)

InDesign CS4,
step 1. Create SnapshotUtilsEx() with addTransparencyAlpha is kTrue.
SnapshotUtilsEx fSnapshotUtilsEx
          = new SnapshotUtilsEx(
                itemUIDRef,      xScale, yScale, desiredRes, minRes, bleed,
               SnapshotUtilsEx::kCsRGB,
               kTrue, //bool8 addTransparencyAlpha ,
               kFalse);
step 2. Draw() with option ...
     fSnapshotUtilsEx.Draw( IShape::kPreviewMode|IShape::kPrinting );
step3. ExportImageToPNG
    IDFile fileSysFile = target png filename..
   InterfacePtr<IPMStream> pngStream(StreamUtil::CreateFileStreamWrite(fileSysFile, kOpenOut|kOpenTrunc));//, fileType, creator));
   if (pngStream == nil) {
   break;
   status = fSnapshotUtilsEx->ExportImageToPNG(pngStream);

How can I select videos (only videos) and export them from iPhoto?

I know how to export one movie at a time from iPhoto, but I want to export all (or a bunch) of videos at a time. They are mixed in with photos, and on many many different dates. Is there a way to find only the movie files and export them as original files? I my macbook is full and if I export iPhoto stuff as a batch the videos end up being reduced to one frame only (the sidecar file). Please advise. Thanks!!

MacBook Pro
Moving Your iPhoto Library External Drive
iMovie Tutorials
iMove Unofficial FAQ

CC: Selecting slices in "save for web"

Hi,
today, I tried to use the export function "save for web" in Illustrator CC 17.1.0 for the first time in many weeks.
I created a document with some slices. Strangely, in the dialogue of "save for web", the image preview isn't shown in the original size although the setting is set to 100%. It seems, like the preview is only about 50% of the original image size.
Furthermore, it is impossible to select the specific slices for renaming it. Also setting up the preview to 200% doesnt solve the problem.
I already uninstalled illustrator with the uninstall file and downloaded the software from the cloud again. But the problem still exists. I also created a complete new document without success...
I don't get the point. Does anyone have an idea how to fix it?
I'm using Mac OS 10.9.1.
Thanks!

I'm seeing this on both my HiDPI laptop display and an external display where the pixel ratio is 1.
I use Save for Web almost every day, so I suspect there was a bug introduced in the latest version of Illustrator. I've also found that when vector graphics are copied and pasted from Illustrator into Photoshop they come in at slightly smaller dimensions. Could be related?
Using File -> Save Selected Slices... in Illustrator seems to work fine, however.
I'm also on Mac OS 10.9.1, running Illustrator CC 17.1.0 on a Retina MacBook Pro, Mid 2012

How to export a data as an XML file from oracle data base?

could u pls tell me the step by step procedure for following questions...? how to export a data as an XML file from oracle data base? is it possible? plz tell me itz urgent requirement...
Thankz in advance
Bala

SQL> SELECT * FROM v$version;
BANNER
Oracle DATABASE 11g Enterprise Edition Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE    11.1.0.6.0      Production
TNS FOR 32-bit Windows: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
5 rows selected.
SQL> CREATE OR REPLACE directory utldata AS 'C:\temp';
Directory created.
SQL> declare
2    doc DBMS_XMLDOM.DOMDocument;
3    xdata XMLTYPE;
4
5    CURSOR xmlcur IS
6    SELECT xmlelement("Employee",XMLAttributes('http://www.w3.org/2001/XMLSchema' AS "xmlns:xsi",
7                                  'http://www.oracle.com/Employee.xsd' AS "xsi:nonamespaceSchemaLocation")
8                              ,xmlelement("EmployeeNumber",e.empno)
9                              ,xmlelement("EmployeeName",e.ename)
10                              ,xmlelement("Department",xmlelement("DepartmentName",d.dname)
11                                                      ,xmlelement("Location",d.loc)
12                                         )
13                   )
14     FROM   emp e
15     ,      dept d
16     WHERE e.DEPTNO=d.DEPTNO;
17
18 begin
19    OPEN xmlcur;
20    FETCH xmlcur INTO xdata;
21    CLOSE xmlcur;
22    doc := DBMS_XMLDOM.NewDOMDocument(xdata);
23    DBMS_XMLDOM.WRITETOFILE(doc, 'UTLDATA/marco.xml');
24 end;
25 /
PL/SQL procedure successfully completed.
.

In SSMS after creating the query Report, how to export excel the same report from SSMS

for Beginners in SSMS after the report is created , how to export the same report to excel, I did try the option to task and export and follow the procedure, this procedure does not export the same report, the one was created, unless I am missing some steps,
is there a way to do just like we do in SSRS go to solution explorer, and properties and add the Target Server URL or not
in SSMS,
after I save the report it saves in project , can some one please guide me how to do it, and what steps I am doing wrong,
any help will be great. I am not technical person, just starting to learn from internet.
thanks in advance.

As you have said you are not a technical person try using Import Export wizard.
Refer this link
http://www.mssqltips.com/sqlservertutorial/203/simple-way-to-import-data-into-sql-server/
And another simplest one is to copy the result set from the query window. Right click the result and select "Copy with Headers".
Regards, RSingh

How to export best quality gif animations in flash

how to export best quality gif animations in flash

GIF is a color restricted format with on/off support for transparency. There's really no settings you can tweak to output a better GIF. You have a drop-down during GIF sequence export to allow transparency, select the amount of colors (up to 256) and you can choose dither to save a little filespace. The only 2 things in there that really matter are dither and amount of colors used to export.
If your content is very similar (e.g. not a lot of complex gradients/shadows/etc) and is limited in color use turning down the amount of colors used and dithering is your only option.
Make sure you're exporting the GIF via "Publish Settings" so you get a single animated GIF and not file->export->movie because this creates a separate sequence of GIF images for each frame.

How to export data with column headers in sql server 2008 with bcp command?

Hi all,
I want know "how to export data with column headers in sql server 2008 with bcp command", I know how to import data with import and export wizard. when i
am trying to import data with bcp command data has been copied but column names are not came.
I am using the below query:-
EXEC master..xp_cmdshell
'BCP "SELECT * FROM   [tempdb].[dbo].[VBAS_ErrorLog] " QUERYOUT "D:\Temp\SQLServer.log" -c -t , -T -S SERVER-A'
Thanks,
SAAD.

Hi All,
I have done as per your suggestion but here i have face the below problem, in print statment it give correct query, in EXEC ( EXEC master..xp_cmdshell @BCPCMD) it was displayed error message like below
DECLARE @BCPCMD
nvarchar(4000)
DECLARE @BCPCMD1
nvarchar(4000)
DECLARE @BCPCMD2
nvarchar(4000)
DECLARE @SQLEXPRESS
varchar(50)
DECLARE @filepath
nvarchar(150),@SQLServer
varchar(50)
SET @filepath
= N'"D:\Temp\LDH_SQLErrorlog_'+CAST(YEAR(GETDATE())
as varchar(4))
+RIGHT('00'+CAST(MONTH(GETDATE())
as varchar(2)),2)
+RIGHT('00'+CAST(DAY(GETDATE())
as varchar(2)),2)+'.log" '
Set @SQLServer
=(SELECT
@@SERVERNAME)
SELECT @BCPCMD1
= '''BCP "SELECT
* FROM   [tempdb].[dbo].[wErrorLog] " QUERYOUT '
SELECT @BCPCMD2
= '-c -t , -T -S '
+ @SQLServer +
SET @BCPCMD
= @BCPCMD1+ @filepath
+ @BCPCMD2
Print @BCPCMD
-- Print out below
'BCP "SELECT
* FROM   [tempdb].[dbo].[wErrorLog] " QUERYOUT "D:\Temp\LDH_SQLErrorlog_20130313.log" -c -t , -T -S servername'
EXEC
master..xp_cmdshell
@BCPCMD
''BCP' is not recognized as an internal or external command,
operable program or batch file.
NULL
if i copy the print ourt put like below and excecute the CMD it was working fine, could you please suggest me what is the problem in above query.
EXEC
master..xp_cmdshell
'BCP "SELECT * FROM
[tempdb].[dbo].[wErrorLog] " QUERYOUT "D:\Temp\LDH_SQLErrorlog_20130313.log" -c -t , -T -S servername '
Thanks, SAAD.

How to export selected slice..

Similar Messages

Maybe you are looking for