How to export some records of a table

oracle:
version 2.11, right click the grid, there is a export function, i can export some records,
version 3.0.04, i can't find the export function, this feature is very useful to me , but why you remove it ?

For some (I find odd) reason - probably an attempt to reduce confusion between the database export as a whole, they renamed it to Unload.
Ta,
Trent
Edited by: trent on Apr 14, 2011 11:51 AM
From the release notes:
Exporting and Importing: The Importing and Exporting wizards have been updated to support a wider range of choices. During the early adopter release cycle Export was renamed to Unload and Import to Load. Following user feedback, we have reverted to the original terms of Import and Export. You'll find these on the Tools > Database Export menu, and Export... on the context menus for Tables and Views and on Data Grids. Import Data is available on table context menus.(bolded for emphasis)
http://www.oracle.com/technetwork/developer-tools/sql-developer/rel3-ea-relnotes-189445.html
Actually, it says its renamed back - I havent used the production release yet, so it should be there. Maybe you are on an EA still?

Similar Messages

How to export some data from the tables of an owner with integrity?

Hi to all,
How to export some data from the tables of an owner with integrity?
I want to bring some data from all tables in a single owner of the production database for development environment.
My initial requirements are: seeking information on company code (emp), contract status (status) and / or effective date of contract settlement (dt_liq_efetiva) - a small amount of data to developers.
These three fields are present in the main system table (the table of contracts). Then I thought about ...
- create a temporary table from the query results table to contract;
- and then use this temporary table as a reference to fetch the data in other tables of the owner while maintaining integrity. But how? I have not found the answer, because: what to do when not there is the possibility of a join between the contract and any other table?
I am considering the possibility of consulting the names of tables, foreign keys and columns above, and create dynamic SQL. Conceptually, something like:
select r.constraint_name "FK name",
r.table_name "FK table",
r.column_name "FK column",
up.constraint_name "Referencing name",
up.table_name "Referencing table",
up.column_name "Referencing column"
from all_cons_columns up
join all_cons_columns r
using (owner, position), (select r.owner,
r.constraint_name fk,
r.table_name table_fk,
r.r_constraint_name r,
up.table_name table_r
from all_constraints up, all_constraints r
where r.r_owner = up.owner
and r.r_constraint_name = up.constraint_name
and up.constraint_type in ('P', 'U')
and r.constraint_type = 'R'
and r.owner = 'OWNERNAME') aux
where r.constraint_name = aux.fk
and r.table_name = aux.table_fk
and up.constraint_name = aux.r
and up.table_name = aux.table_r;
-- + Dynamic SQL
If anyone has any suggestions and / or reuse code to me thank you very much!
After resolving this standoff intend to mount the inserts in utl_file by a table and create another program to read and play in the development environment.
Thinking...
Let's Share!
My thanks in advance,
Philips

Thanks, Peter.
Well, I am working with release 9.2.0.8.0. But the planning is migrate to 10g this year. So my questions are:
With Data Pump can export data just from tables owned for me (SCHEMAS = MYOWNER) parameterizing the volume of data (SAMPLE) and filters to table (QUERY), right? But parameterizing a contract table QUERY = "WHERE status NOT IN (2,6) ORDER BY contract ":
1º- the Data Pump automatically searches for related data in other tables in the owner? ex. parcel table has X records related (fk) with Y contracts not in (2,6): X * SAMPLE records will be randomly exported?
2º- for the tables without relation (fk) and which are within the owner (MYOWNER) the data is exported only based on the parameter SAMPLE?
Once again, thank you,
Philips
Reading Oracle Docs...

Goto: How to export some data from the tables of an owner with integrity?

Hi to all,
Help please: How to export some data from the tables of an owner with integrity?
My thanks in advance,
Philips

Thanks, Peter.
Well, I am working with release 9.2.0.8.0. But the planning is migrate to 10g this year. So my questions are:
With Data Pump can export data just from tables owned for me (SCHEMAS = MYOWNER) parameterizing the volume of data (SAMPLE) and filters to table (QUERY), right? But parameterizing a contract table QUERY = "WHERE status NOT IN (2,6) ORDER BY contract ":
1º- the Data Pump automatically searches for related data in other tables in the owner? ex. parcel table has X records related (fk) with Y contracts not in (2,6): X * SAMPLE records will be randomly exported?
2º- for the tables without relation (fk) and which are within the owner (MYOWNER) the data is exported only based on the parameter SAMPLE?
Once again, thank you,
Philips
Reading Oracle Docs...

How to insert some records in one table and some records in another table

Interview question
how insert records in two tables by using trigger
CREATE or REPLACE TRIGGER Emp_Ins_Upd_Del_Trig
BEFORE delete or insert or update on EMP
FOR EACH ROW
BEGIN
if UPDATING then
UPDATE emp2
SET
empno = :new.empno,
ename = :new.ename
--, job = :new.job
--, mgr = :new.mgr
--, hiredate = :new.hiredate
, sal = :new.sal
--, comm = :new.comm
--, deptno = :new.deptno;
sdate = :new.sdate,
edate = :new.edate
end if;
if INSERTING then
INSERT INTO emp2
VALUES
( :new.empno
, :new.ename
--, :new.job
--, :new.mgr
--, :new.hiredate
, :new.sal
--, :new.comm
--, :new.deptno
new.sdate,
new.edate);
end if;
if DELETING then
DELETE FROM emp2
WHERE empno = emp2.empno;
end if;
END;
it is working fine but he wants to insert some specific litimit on one table and some specified limit of records in one ..
In this senerio can i insert records by use count of records...
please help me..

Can you be more specific on the "Limit"
Conditional insert can be used in this case.

How to delete a record from BSEG table

Dear Experts,
How to delete a record from BSEG table.
If there possible to delete some records from transparent table ?
Please help.
Regards,
Tan

Hi,
Deleting a record from a standard table can be done only if table maintenance exists - Cehck tcode - SM30. But it is not advisable to delete records, coz the records may be dependent on many other tables. If u delete in a single place, there may be chance that inconsistency in the data happens and hence will affect ur financial statements.
Pls. assign points, if useful
Regards,
Sridevi

Regarding how to delete the record in internal table

Hi experts ,
how to delete the record in intarnal table after validating the data,
if record contains invalid fields?
i am giving my code see this and give me the answer?
loop at it_data into wa_data .
Validate Cost Center
    READ TABLE it_kostl INTO wa_kostl WITH KEY kostl = wa_data-kostl BINARY SEARCH.
    IF sy-subrc NE 0.
      PERFORM update_error_log USING wa_data
                                     text-004.
    ENDIF.
Validate source file material ( material number )
loop at it_mara into wa_mara .
read table it_ausp into wa_ausp with key atwrt = wa_data-i_matnr .
           if sy-subrc NE 0 .
   PERFORM update_error_log USING wa_data
                                       text-002.
delete it_data-objek .
     else.
read table it_mara into wa_mara with key matnr = wa_ausp-objek .
       if sy-subrc EQ 0 .
       wa_data-objek = wa_mara-matnr.
       wa_data-matkl = wa_mara-matkl.
     ENDIF.
     Modify it_data from wa_data .
endif.
*endloop.
Validate unit of measure (unit)
    READ TABLE it_t006 INTO wa_t006 WITH KEY msehi = wa_data-unit .
    IF sy-subrc NE 0.
      PERFORM update_error_log USING wa_data
                                     text-003.
    endif.
Validate delivery location ( storage location )
    READ TABLE it_lgort INTO wa_lgort WITH KEY del_loc = wa_data-del_loc.
    IF sy-subrc NE 0.
      PERFORM update_error_log USING wa_data
                                     text-001.
         if wa_data-flag ='x' .
      delete it_data from wa_data .
    endif.
    ENDIF.
endloop.

Hi Naren,
First get the index number of the IT_data table and store it in one variable whose declaration like this.
data: tabix type sy-tabix.
while reading the internal table it_data set the tabix variable.
tabix = sy-tabix.
Instead of the above use below one.
Delete it_data-objek
Use the Below statement it will delete the row from the internal table.
Delete it_data-objek index tabix
Thanks,
Chidanand

How to delete some date in target table at a mapping?

How to delete some date in target table at a mapping?
I extract date from source tabel into target table,
but before extract date I want to delete some date from target?
how to do?

Just to change a bit of terminology in the reply, within the mapping, click on operator properties and choose TRUNCATE/INSERT.
Note that truncate is dependent on constraints, so you probably must disable those before doing this. You can of course do DELETE/INSERT...
Jean-Pierre

How to export data from a Oracle table to a delimited file?

I know how to load delimited file into a table, but how to export
data from a Oracle table to a delimited file?
Thanks in advance.

Try looking at this link, it's long but there's three different solutions discussed in it. If you look at Barbara Boehmer's
solution in her posts in the link below you'll see that she's addressed your concerns with spool files.
Re: utl_smtp and triggers

How to insert a record in ROOSPRMSC table? (accidentally deleted)

Calling an InfoPackage in BW causes short dump, while fixing the short dump issue, accidentally
deleted the "ROOSPRMSC" table entries.
Could you tell me how to insert a record in "ROOSPRMSC" table???

Hi Senthil,
Regards,
Phani Raj Kallur
Message was edited by: Phani Raj Kallur

How can i fetch records from 3 tables in a single query without using join

Hi.
Can any body please tell me <b>How can i fetch records from 3 tables with a single query without using joins</b>
Thanx
prabhudutta

Hi Prabgudutta,
We can fetch the data by using the views concept.
Go throuth this info we can know the how to create view and same like database table only we can fetch the data.
Views conatin the data at runtime only.
Four different view types are supported. These differ in the
way in which the view is implemented and in the methods
permitted for accessing the view data.
Database views are implemented with an equivalent view on
the database.
Projection views are used to hide fields of a table (only
projection).
Help views can be used as selection method in search helps.
Maintenance views permit you to maintain the data
distributed
on several tables for one application object at one time.
step by step creation of Maintenance view:
With the help of the table maintenance generator, you are able to maintain the ENTRIES of the table in SM30 transaction.
It can be set in transaction SE11 - Tools - Table maintenance generator.
Table maintanance Generator is used to manually input values using transaction sm30
follow below steps
1) go to se11 check table maintanance check box under attributes tab
2) utilities-table maintanance Generator-> create function group and assign it under
function group input box. Also assign authorization group default &NC& .
3) select standard recording routine radio in table table mainitainence generator to move table
contents to quality and production by assigning it to request.
4) select maintaience type as single step.
5) maintainence screen as system generated numbers this dialog box appears when you click on create button
6) save and activate table
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
SM30 is used for table maintenance(addition or deletion of records),
For all the tables in SE11 for which Table maintenance is selected , they can be maintained in SM30
Sm30 is used to maintain the table ,i.e to delete ,insert or modify the field values and all..
It creates the maintenance screen for u for the aprticular table as the maintenance is not allowed for the table..
In the SE11 delivery and maintenance tab, keep the maintenance allowed..
Then come to the SM30 and then enter the table name and press maintain..,
Give the authorization group if necessary and give the function group and then select maintenance type as one step and give the screen numbers as system specified..
Then create,,,
Then u will able to see the maintenance view for the table in which u can able to insert and delete the table values...
We use SM30 transaction for entering values into any DB table.
First we create a table in SE11 and create the table maintenance generator for that Table using (utilities-> table maintenance generator) and create it.
Then it will create a View.
After that from SM30, enter the table name and Maintain, create new entries, change the existing entries for that table.
Hope this resolves your query.
Reward all the helpful answers.
Rgds,
P.Naganjana Reddy

How to identify new records in a table using OBIEE

Hi,
I have price change table as and when a record comes into this table i have to generate an alert. Then show a report with the price changes on which i can invoke an action to go into my transactional system to make the chnage. And once the change is made the process again starts to look for any new price chnage records that are recieved.
Could anyone pls tell me how to identify new records in a table.
Rgds

SELECT ID, LastName, FirstName,
RANK() OVER (PARTITION BY LastName,
FirstName ORDER BY ID) AS SeqNumber
FROM
(SELECT ID, LastName, FirstName
FROM Customers
WHERE (LastName, FirstName) IN
(SELECT LastName, FirstName
FROM Customers
GROUP BY LastName, FirstName
HAVING COUNT(*) > 1)

How to SELECT ALL records of a TABLE VIEW in the BSP page

Hi All,
In the BSP portal, I am displaying some data(multple records) in the form of a table using the BSP TAG <htmlb:tableView>. I wrote the logic in the 'VIEW' of the BSP application which will be triggered by the controller. I have used the attribute selectionMode = "MULTISELECT" to have a Check Box to select a row.
My requirement is to have a button/checkbox on the first column of the header of the table view. By clicking on this, it should select/desect all the records of the table. Could someone please help me how to do this? What attribute I should use in the tableview to get the button in the header row of the table and how to select all the records of the table.?
Please provide your valuable inputs.
Thanks & Regards,
Paddu.

Select all / Deselect all functionality when onRowSelection is there

How to delete some data from GLPCA table

Dear Friends,
We have extracted some data in GLPCA table via the ECPA component. We
want to delete these records ( Doc type and Posting date is known).
However we do not want other data already existing the GLPCA to be
deleted. Is there some Std SAP Trx for deletion of partial/select data
from EIS tables.
Please explain us clearaly how we can delete these records.
Your quick reply for this issue is highly appreciated.
Thanks & Regards,
Naveen Kumar.

Hello,
Please check the use of the report ZDELETE_PCA_DATA_BUKRS (mentioned in the SAP note 1174360), to delete totals from GLPCT.
I am not sure of any deletion reports for GLPCA table.
If you open the Source code of this program, you can see the following information :
"This report provides a possibility to delete actual and plan
*& postings on company code level as an alternative for transaction
*& 0KE1."
I do not have much information on this report as, personally I haven't used this anytime. Please run in 'Test Run' mode first and look for the results.
I hope this helps.
Thanks and regards,
Suresh Jayanthi.

Export specific records from all table? Please help me with my query

hi
there are around 200 tables, I want to take a export of all tables of xyz schema.
My requirement is just a few records of primary key and their relevant records from other tables to be exported by using exp or expdp utility.

Hi Toni...
Thanks for your reply.
Could you please help me understand how to user this expdp query...
and what exactly should i mention in the parfile. I want all relevant records from all tables of primary key. please help me to write a query accordingly.

How to Restore deleted records in other table in oracle database 10g...

Hi All,
i want to restore deleted records of a particular table in other table
suppose:
i perform a query
delete from emp
where deptno =30;
now i wont to restore deptno=30 records in other table, let say in emp1 table
can any one let me know how to do it?
Thanks..

This is what flashback query is for:
orclz> conn scott/tiger
Connected.
orclz> select count(*) from emp;
COUNT(*)
14
orclz> delete from emp where deptno=30;
6 rows deleted.
orclz> commit;
Commit complete.
orclz> create table deleted30 as select * from emp as of timestamp(systimestamp - 5/1440) where deptno=30;
Table created.
orclz> select count(*) from deleted30;
COUNT(*)
6
orclz>

How to export some records of a table

Similar Messages

Maybe you are looking for