How to Export the files to the Sandbox system

Hello Experts,
I'm new to HANA and started using the HANA sandbox.
As per the instructions in the document "SAP HANADatabase u2013 Development Guide Beta Preview" page 26, I have downloaded the file in my LAPTOP but I dont know how to load those files in the sandbox desktop!
I have tried saving the file using the URL In the HANA sandbox and saved the same in the desktop but not sure as to how to proceed
"Please download the file into a directory on the SAP HANA appliance, e. g. /home/guest/sflight and unzip it using the command" as stated in the document.
Can you please guide this step to understand the same better?
Many thanks in advance
Raman

I have got the help from the other files.. hence closing this thread.

Similar Messages

How to export a file keeping the original timecode

Hello all,
I'm struggling to find out the way to do the following:
I have an entire footage file and from that I need to cut specific interviews to be translated however I must keep the original timecode where I extracted these interviews from so the editor knows where to place the subtitles (as s/he will be using the file as a whole and because it is a foreign language they won't know the correct place).
Does anyone know how to do this? Using FCP7 btw.
Thank you so so much!!!

You cannot export a single QT file that has multiple timecodes embedded into it. What you can do is drop on the TIMECODE READER filters onto the clips so that they visibly show the timecode on the screen as reference.

HT2203 How do I export a file from the new iMovie 10.0.2 to iPod size?

How do I export a file from the new iMovie 10.0.2 to iPod size? I used to be able to do this and it would save as a m4v file but I can no longer do this and the files are too big.

iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
iTunes: Frequently asked questions about viewing and syncing videos
You may need a third-party computer app like HandBreak. That one is free and has preset outputs for iOS devices

How to hide the file name (the bizarre number assigned by the camera) when exporting an image version in aperture from an album. Pl understand I want to keep the file name in the project library version.

how to hide the file name (the bizarre number assigned by the camera) when exporting an image version in aperture from an album. Pl understand I want to keep the file name in the project library version.

Within Aperture you have Images, which are constructed on-the-fly from two files (the Master and the Version). You get an image-format file _only_ when you export an Image. You select the file name (usually a scheme) when you create an image-format file (that is, when you export). Look under "Aperture→Presets→File Naming" for built-in Presets. You can, of course, create your own or customize any provided.
The Preset is applied to only the file newly created by your "export" command. It is not applied to the Image in Aperture (unless you rename your Versions or your Masters).

Generate a PDF export and getting the file or the bytestream to modify it

Hi everybody
I have a web dynpro application and want to get the bytestream or the PDF file itself.
Is there a function (RFC, J2EE-Method, ABAP methode/class) where I can say
"Hey function, generate a PDF export of a BI report and save the PDF file <br>somewhere in the KM or return the bytestream of the PDF"
I must be able to define following parameters
-BI template name
-values for the selection mask (the same as the BEx BI-Commands to prefill a field in the selection mask)
-KM path + filename (if the function saves the file in the KM)
What I already tried:
Broadcast to KM
I can start the broadcast automatically using the report RSRD_BROADCAST_STARTER. But the problem is that I can't generate a broadcast setting and so I'm not able to define the filename and selectionmask data dynamically.
Package RSRD
When you enter the transaction SE80 and look for the package "RSRD" there are a lot of interesting classes and methods. But I couldn't figure out how to call them to generate a PDF export of a BI report.
FM RSADOB_PDFREPORT_GENERATE
This function module have all the parameters I wish. The problem is that it does not work anymore. It's just an internal test for the SAP guys themselves.
So ...
Have anybody an idea how to solve this?
How to generate a PDF export of a BI report and fill the selection mask and get the PDF (as bytecode or file in the KM) ?
Thanks lot
Klaudio

hi,
Like you said.. steps are simple and clearly mentioned in guide.
1. create a variable of type string
2. after configuring the file adapter , go to corresponding receive activity , go to properties tab
3. search for a property with name as jca.file.FileName . This basically keeps track of file name
4. for this property, give the value as name of variable created in step 1 above
5. Use this variable anywhere in assign / transform
HTH,
Ketan

How to do CHECK IN the files for the document?

Hi ,
By using BAPI_DOCUMENT_CHECKIN2 Function module I am uploading the Files for the Document number.
My problem is - After uploading the files to the document number the files are not in check in status.
I want the files to be checked in after uploading the from the FM.
Can anyone tell me what I am missing ? How to do check in the files.
I am passing the following values to FM.
      ls_files-SOURCEDATACARRIER = ls_file-DATA_CARRIER.
      ls_files-WSAPPLICATION     = ls_file-application.
      ls_files-DESCRIPTION       = ls_file-file_desc.
      ls_files-STORAGECATEGORY   = ls_file-category.
      ls_files-DOCFILE           = ls_file-doc_path.
      ls_files-CHECKEDIN         = 'X'.
    CALL FUNCTION 'BAPI_DOCUMENT_CHECKIN2'
      EXPORTING
        DOCUMENTTYPE            = ls_file_data-dokar
        DOCUMENTNUMBER          = ls_file_data-doknr
        DOCUMENTPART            = ls_file_data-doktl
        DOCUMENTVERSION         = ls_file_data-dokvr
      IMPORTING
        RETURN                  = ls_return
      TABLES
        DOCUMENTFILES           = lt_files
    COMPONENTS              =
    DOCUMENTSTRUCTURE       =
I appriciate you response on this.
Thanks in advance.

Hi,
Check the values you are passing into ls_files .
you dont need to pass checkedin = 'X'.
and check the storagecategory field - this should not be blnak.
files-SOURCEDATACARRIER = lsfile-DATA_CARRIER.
ls_files-WSAPPLICATION = ls_file-application.
ls_files-DESCRIPTION = ls_file-file_desc.
ls_files-STORAGECATEGORY = ls_file-category.
ls_files-DOCFILE = ls_file-doc_path.
ls_files-CHECKEDIN = 'X'.
This FM will work. No issues just check the values you are psssing into this LS_FILES structure.
Rest of the fields are corect.
Thanks,
Murali.

How to do Check in the files for the document number?

Hi ,
By using BAPI_DOCUMENT_CHECKIN2 Function module I am uploading the Files for the Document number.
My problem is - After uploading the files to the document number the files are not in check in status.
I want the files to be checked in after uploading the from the FM.
Can anyone tell me what I am missing ? How to do check in the files.
I am passing the following values to FM.
      ls_files-SOURCEDATACARRIER = ls_file-DATA_CARRIER.
      ls_files-WSAPPLICATION     = ls_file-application.
      ls_files-DESCRIPTION       = ls_file-file_desc.
      ls_files-STORAGECATEGORY   = ls_file-category.
      ls_files-DOCFILE           = ls_file-doc_path.
      ls_files-CHECKEDIN         = 'X'.
    CALL FUNCTION 'BAPI_DOCUMENT_CHECKIN2'
      EXPORTING
        DOCUMENTTYPE            = ls_file_data-dokar
        DOCUMENTNUMBER          = ls_file_data-doknr
        DOCUMENTPART            = ls_file_data-doktl
        DOCUMENTVERSION         = ls_file_data-dokvr
      IMPORTING
        RETURN                  = ls_return
      TABLES
        DOCUMENTFILES           = lt_files
    COMPONENTS              =
    DOCUMENTSTRUCTURE       =
I appriciate you response on this.
Thanks in advance.

Any answers for this?
Thanks.

How to move the file in the same system

Hi ,
         i have a small dought in moving the file along the system from DEV 20 to DEV 30 .
And how to have check boxes to each record in a alv list .
and how to have values to the combobox as alist .
Please let clear me some of the doughts i have .
Thanks ,
vinay .

hi,
Try this sample code.
You have to populated internal table in at selection screen output and pass it to fm VRM_SET_VALUES.
AT SELECTION-SCREEN OUTPUT.
PERFORM ADD_VALUES_TO_KOART.
COMMENT = 'Account type'.
*&      Form ADD_VALUES_TO_KOART
*       Fill the values in dropdownlistbox
FORM ADD_VALUES_TO_KOART .
TYPE-POOLS: VRM.
DATA: MY_LIST TYPE VRM_VALUES,
        VALUE LIKE LINE OF MY_LIST.
DATA : BEGIN OF I_TAB OCCURS 0 ,
         KOART TYPE C,
         END OF I_TAB.
CLEAR I_TAB.
I_TAB-KOART = 'A'.
APPEND I_TAB.
CLEAR I_TAB.
I_TAB-KOART = 'D'.
APPEND I_TAB.
CLEAR I_TAB.
I_TAB-KOART = 'K'.
APPEND I_TAB.
CLEAR I_TAB.
I_TAB-KOART = 'M'.
APPEND I_TAB.
CLEAR I_TAB.
I_TAB-KOART = 'S'.
APPEND I_TAB.
CLEAR I_TAB.
*& Filling the list structure with values from MARA table
LOOP AT I_TAB.
    VALUE-KEY = SY-TABIX.
    VALUE-TEXT = I_TAB-KOART.
    APPEND VALUE TO MY_LIST.
ENDLOOP.
*& Finally calling the function module to create the list box.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      ID     = 'MYLIST'
      VALUES = MY_LIST.
ENDFORM.                    " ADD_VALUES_TO_KOART
Regards,
Sailaja.

I need to convert PDF file to Word Document, so it can be edited. But the recognizing text options do not have the language that I need. How I can convert the file in the desired of me language?

I need to convert PDF file to Word Document, so it can be edited. But the recognizing text options do not have the language that I need. How I can convert the file in the desired of me language?

The application Acrobat provides no language translation capability.
If you localize the language for OS, MS Office applications, Acrobat, etc to the desired language try again.
Alternative: transfer a copy of content into a web based translation service (Bing or Google provides a free service).
Transfer the output into a word processing program that is localized to the appropriate language.
Do cleanup.
Be well...

How to see the file at the application server

HI TO ALL SDNERS ,
                             THIS IS MY CODE WHERE TO CHECK THE DOWNLOADED FILE AT THE APPLICATION SERVER.IN TCODE AL11 I HAVE SEEN THERE IS NO FILE GETTING CREATED.WHEN TRANSFERRING THE SY-SUBRC VALUE IS ZERO.
Program Name        : ZME11_BDC.
Title               : PURCHASE INFORMATION RECORD LOAD PROGRAM
Program Objective   : THIS PROGRAM READS IN THE PURCHASE
                      INFORMATION FILE. IT CREATES A BDC SESSION TO
                      USE TO LOAD THE PURCHASE INFORMATION RECORDS
                      INTO SAP using the ME11 Transaction.
REPORT ZME11_BDC no standard page heading MESSAGE-ID ZHNC line-size 55.
            constants declaration
constants: c_x value 'X',
           c_sess type apqi-groupid value 'zcustomer',
           c_xd01 type tstc-tcode value 'ME11'.
              DECLARING VARIABLES
DATA: V_MSG(255),
      V_ERREC TYPE I,"NO OF FAILED RECORDS
      V_LINES."NO OF RECORDS
       FLAG DECLARATIONS
DATA: FG_DATA_EXIST VALUE 'X',"CHECK FOR DATA
      FG_SESSION_OPEN VALUE ''.
      STRUCTURES AND INTERNAL TABLE DECLARATIONS
TYPES :BEGIN OF TY_PIR,
         LIFNR TYPE EINA-LIFNR,
         MATNR TYPE EINA-MATNR,
         EKORG TYPE EINE-EKORG,
         WERKS TYPE EINE-WERKS,
         VERKF TYPE EINA-VERKF,"sales person
         TELF1 TYPE EINA-TELF1,"telephone
         URZLA TYPE EINA-URZLA,"country
         REGIO TYPE EINA-REGIO,"region
         APLFZ(5),"plan deleivery time
         EKGRP TYPE EINE-EKGRP,"purchase group
         NORBM(13),
         NETPR(13),
     END OF TY_PIR.
DATA : IT_PIR TYPE TABLE OF TY_PIR,
       WA_PIR LIKE LINE OF IT_PIR.
DATA: BEGIN OF IT_BDCDATA.
INCLUDE STRUCTURE BDCDATA.
DATA END OF IT_BDCDATA.
DATA : BEGIN OF IT_BDCMSG.
INCLUDE STRUCTURE BDCMSGCOLL.
DATA END OF IT_BDCMSG.
                  SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : FNAME TYPE RLGRAP-FILENAME.
SELECTION-SCREEN END OF BLOCK B1.
                       AT SELECTION ON VALUE REQUEST
AT SELECTION-SCREEN ON VALUE-REQUEST FOR FNAME.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
   PROGRAM_NAME        = SYST-CPROG
   DYNPRO_NUMBER       = SYST-DYNNR
   FIELD_NAME          = ' '
IMPORTING
   FILE_NAME           = FNAME.
                         START OF SELECTION
START-OF-SELECTION.
PERFORM F_GET_DATA USING FNAME
                   CHANGING IT_PIR.
PERFORM F_GENERATE_DATASET USING FNAME
                           CHANGING IT_PIR WA_PIR.
*&      Form F_GET_DATA
      text
     -->P_V_FNAME text
     <--P_IT_PIR text
FORM F_GET_DATA USING    P_FNAME LIKE FNAME
                 CHANGING P_IT_PIR LIKE IT_PIR.
DATA: LV_FILE TYPE STRING.
LV_FILE = FNAME.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = LV_FILE
   FILETYPE                      = 'DAT'
HAS_FIELD_SEPARATOR           = 'X'
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
IMPORTING
FILELENGTH                    =
HEADER                        =
TABLES
    DATA_TAB                      = P_IT_PIR
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF P_IT_PIR IS INITIAL.
FG_DATA_EXIST = ''.
ENDIF.
ENDFORM.                    " F_GET_DATA
*&      Form F_GENERATE_DATASET
      text
     -->P_V_FNAME text
     <--P_IT_PIR text
FORM F_GENERATE_DATASET USING    P_V_FNAME LIKE FNAME
                         CHANGING P_IT_PIR LIKE IT_PIR
                                  P_WA_PIR LIKE WA_PIR.
MESSAGE I001(ZHNC).
*OPENING FILE AT THE APPLICATION SERVER FOR WRITING
OPEN DATASET FNAME FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF SY-SUBRC EQ 0.
MESSAGE I002(ZHNC).
LOOP AT P_IT_PIR INTO P_WA_PIR.
SPLIT P_WA_PIR AT '*' INTO P_WA_PIR-LIFNR
                           P_WA_PIR-MATNR
                           P_WA_PIR-EKORG
                           P_WA_PIR-WERKS
                           P_WA_PIR-VERKF
                           P_WA_PIR-TELF1
                           P_WA_PIR-URZLA
                           P_WA_PIR-REGIO
                           P_WA_PIR-APLFZ
                           P_WA_PIR-EKGRP
                           P_WA_PIR-NORBM.
*TRANSFER THE FILE FROM INTERNAL TABLE TO APPLICATION SERVER
MESSAGE I003(ZHNC).
TRANSFER P_WA_PIR TO FNAME.
ENDLOOP.
*CLOSING THE FILE AT THE APPLICATION SERVER
CLOSE DATASET FNAME.
ENDIF.

Hello,
I made a similar program. You can have a look at it.
*&      Form write_to_app_server
      text
--> p1        text
<-- p2        text
FORM write_to_app_server.
To get filename
PERFORM get_filename.
To write into the application server
OPEN DATASET g_filename_with_path FOR OUTPUT IN TEXT MODE.
IF sy-subrc = 0.
    LOOP AT <l_table> INTO <l_line>.
      TRANSFER <l_line> TO g_filename_with_path.
    ENDLOOP.
    CLOSE DATASET g_filename_with_path.
ELSE.
    CLOSE DATASET g_filename_with_path.
ENDIF.
To send mail
PERFORM send_mail.
ENDFORM.                    " write_to_app_server
*&      Form get_filename
      text
--> p1        text
<-- p2        text
FORM get_filename.
DATA : l_log_path TYPE filepath-pathintern
                      VALUE 'Y28M_DOWNLOADS_BACKGROUND' .
CALL FUNCTION 'FILE_GET_NAME_USING_PATH'
       EXPORTING
            client                     = sy-mandt
            logical_path               = l_log_path
            operating_system           = sy-opsys
            file_name                  = p_fname
       IMPORTING
            file_name_with_path        = g_filename_with_path
       EXCEPTIONS
            path_not_found             = 1
            missing_parameter          = 2
            operating_system_not_found = 3
            file_system_not_found      = 4
            OTHERS                     = 5.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " get_filename
You may find it useful.
Regards,
Karuna.

How can i get also the files in the root directory and how can i for testing add items of IEnumerable FTPListDetail to List string ?

What i get is only the directories and files that in other nodes. But i have also files on the root directory and i never
get them. This is a screenshot of my program after i got the content of my ftp. I'm using treeView to display my ftp content:
You can see two directories from the root but no files on the root it self. And in my ftp server host i have files in the root direcory.
This is the method i'm using to get the directory listing:
public IEnumerable<FTPListDetail> GetDirectoryListing(string rootUri)
var CurrentRemoteDirectory = rootUri;
var result = new StringBuilder();
var request = GetWebRequest(WebRequestMethods.Ftp.ListDirectoryDetails, CurrentRemoteDirectory);
using (var response = request.GetResponse())
using (var reader = new StreamReader(response.GetResponseStream()))
string line = reader.ReadLine();
while (line != null)
result.Append(line);
result.Append("\n");
line = reader.ReadLine();
if (string.IsNullOrEmpty(result.ToString()))
return new List<FTPListDetail>();
result.Remove(result.ToString().LastIndexOf("\n"), 1);
var results = result.ToString().Split('\n');
string regex =
@"^" + //# Start of line
@"(?<dir>[\-ld])" + //# File size
@"(?<permission>[\-rwx]{9})" + //# Whitespace \n
@"\s+" + //# Whitespace \n
@"(?<filecode>\d+)" +
@"\s+" + //# Whitespace \n
@"(?<owner>\w+)" +
@"\s+" + //# Whitespace \n
@"(?<group>\w+)" +
@"\s+" + //# Whitespace \n
@"(?<size>\d+)" +
@"\s+" + //# Whitespace \n
@"(?<month>\w{3})" + //# Month (3 letters) \n
@"\s+" + //# Whitespace \n
@"(?<day>\d{1,2})" + //# Day (1 or 2 digits) \n
@"\s+" + //# Whitespace \n
@"(?<timeyear>[\d:]{4,5})" + //# Time or year \n
@"\s+" + //# Whitespace \n
@"(?<filename>(.*))" + //# Filename \n
@"$"; //# End of line
var myresult = new List<FTPListDetail>();
foreach (var parsed in results)
var split = new Regex(regex)
.Match(parsed);
var dir = split.Groups["dir"].ToString();
var permission = split.Groups["permission"].ToString();
var filecode = split.Groups["filecode"].ToString();
var owner = split.Groups["owner"].ToString();
var group = split.Groups["group"].ToString();
var filename = split.Groups["filename"].ToString();
var size = split.Groups["size"].Length;
myresult.Add(new FTPListDetail()
Dir = dir,
Filecode = filecode,
Group = group,
FullPath = CurrentRemoteDirectory + "/" + filename,
Name = filename,
Owner = owner,
Permission = permission,
return myresult;
And then this method to loop over and listing :
private int total_dirs;
private int searched_until_now_dirs;
private int max_percentage;
private TreeNode directories_real_time;
private string SummaryText;
private TreeNode CreateDirectoryNode(string path, string name , int recursive_levl )
var directoryNode = new TreeNode(name);
var directoryListing = GetDirectoryListing(path);
var directories = directoryListing.Where(d => d.IsDirectory);
var files = directoryListing.Where(d => !d.IsDirectory);
total_dirs += directories.Count<FTPListDetail>();
searched_until_now_dirs++;
int percentage = 0;
foreach (var dir in directories)
directoryNode.Nodes.Add(CreateDirectoryNode(dir.FullPath, dir.Name, recursive_levl+1));
if (recursive_levl == 1)
TreeNode temp_tn = (TreeNode)directoryNode.Clone();
this.BeginInvoke(new MethodInvoker( delegate
UpdateList(temp_tn);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
foreach (var file in files)
TreeNode file_tree_node = new TreeNode(file.Name);
file_tree_node.Tag = "file" ;
directoryNode.Nodes.Add(file_tree_node);
numberOfFiles.Add(file.FullPath);
return directoryNode;
Then updating the treeView:
DateTime last_update;
private void UpdateList(TreeNode tn_rt)
TimeSpan ts = DateTime.Now - last_update;
if (ts.TotalMilliseconds > 200)
last_update = DateTime.Now;
treeViewMS1.BeginUpdate();
treeViewMS1.Nodes.Clear();
treeViewMS1.Nodes.Add(tn_rt);
ExpandToLevel(treeViewMS1.Nodes, 1);
treeViewMS1.EndUpdate();
And inside a backgroundworker do work how i'm using it:
var root = Convert.ToString(e.Argument);
var dirNode = CreateDirectoryNode(root, "root", 1);
e.Result = dirNode;
And last the FTPListDetail class:
public class FTPListDetail
public bool IsDirectory
get
return !string.IsNullOrWhiteSpace(Dir) && Dir.ToLower().Equals("d");
internal string Dir { get; set; }
public string Permission { get; set; }
public string Filecode { get; set; }
public string Owner { get; set; }
public string Group { get; set; }
public string Name { get; set; }
public string FullPath { get; set; }
Now the main problem is that when i list the files and directories and display them in the treeView it dosen't get/display
the files in the root directory. Only in the sub nodes.
I will see the files inside hello and stats but i need also to see the files in the root directory.
1. How can i get and list/display the files of the root directory ?
2. For the test i tried to add to a List<string> the items in var files to see if i get the root files at all.
This is what i tried in the CreateDirectoryNode before it i added:
private List<string> testfiles = new List<string>();
Then after var files i did:
testfiles.Add(files.ToList()
But this is wrong. I just wanted to see in testfiles what items i'm getting in var files in the end of the process.
Both var files and directoryListing are IEnumerable<FTPListDetail> type.
The most important is to make the number 1 i mentioned and then to do number 2.

Risa no.
What i mean is this. This is a screenshot of my ftp server at my host(ipage.com).
Now this is a screenshot of my program and you can see that in my program i have only the directories hello stats test but i don't have the files in the root: htaccess.config swp txt 1.txt 2.png....all this files i don't have it on my treeView.
What i want it to be is that on my program on the treeView i will also display the files like in my ftp server.
I see in my program only the directories and the files in the directories but i don't see the files on the root directory/node.
I need it to be like in my ftp server i need to see in my program the htaccess 1.txt 2.png and so on.
So what i wrote in my main question is that in the var files i see this files of the root directory i just don't know to add and display them in my treeView(my treeView is treeViewMS1).
I know i checked in my program in the method CreateDirectoryNode i see in the first iteration of the recursive that var files contain this root files i just dont know how to add and display them in my treeView.
On the next iterations when it does the recursive it's adding the directories hello stats test and the files in this directories but i need it to first add the root files.

When I go to my downloads folder on my dock and click the file all the content shows up but as soon as I go to open it in the finder, I get a blank window. Has anyone else had this problem, if so, How do you fix it.

When I go to my downloads folder on my dock and click the file all the content shows up but as soon as I go to open it in the finder, I get a blank window. Has anyone else had this problem, if so, How do you fix it. I also cant delete anything from this folder because of it. Any help would be greatly appreciated.

Hey Allen,
I am having the same issue here in September. How did yor situation get resolved. My iPad Siri works great. My iPhone 5 Siri has been out of comission (OOC) for almost a month and I am beginning to get a little frustrated since Siri works so well in July....ANY assistance would be highly appreciated... Thanx

HT2518 How do I transfer music from an external hard drive to my itunes on my mac? I have put the files into the itunes media, but they are not showing up in iTunes!

How do I transfer music from an external hard drive to my itunes on my mac? I have put the files into the itunes media, but they are not showing up in iTunes!

Hi, did you try iTunes>File>Import?

How can I get a pdf. to open in Safari, all i'm getting is a new window with a black, blank page, instead of the pdf., and I don't want to save the file to the desktop, Safari didn't use to do that, and I don't have Adobe in the internet plug in folder.

How can I get a pdf. to open in Safari, all i'm getting is a new window with a black, blank page, instead of the pdf., and I don't want to save the file to the desktop, Safari didn't use to do that, and I don't have Adobe in the internet plug in folder.

Hi
Please take a look to this thread Re: Can I refresh the browser rather than open a new tab?

How to download a file from the net and save it into .txt format in a datab

Can some one show me a tutorial on how to download a file from the net and save it into .txt format in a database?
Thank you,

http://java.sun.com/docs/books/tutorial/networking/urls/readingWriting.html

How to Export the files to the Sandbox system

Similar Messages

Maybe you are looking for