How to export to CS3

Can anyone tell me if CS3 can open CS4 files?
If not, how do I export to CS3? I can't find the dialogue to select "save as" an earlier version of FW.

The biggest issue is that CS3 uses the old type engine and CS4 uses
the Adobe type engine. You'll be prompted to update your fonts and
text areas may get repositioned. NO way to be sure unless you try. S
long as you don't save the file with the same name, you won't have to
worry about any permanent impact.
Jim Babbage

Similar Messages

How to export keywords, CS3 to CS4

I have CS3 on my old computer, under Win XP, and CS4 on my new, under Windows 7 RC. I have about 20,000 photos, all with Bridge keywords, applied in CS3.
The photos are on an external HD. (They're also backed up in at least 3 places.) In my old computer the photos taken in the past 5 years have keywords in Bridge. In my new computer the same photos, on the same drive, have no keywords, though earlier ones do.
I have done all the things I'm supposed to do: trashed my Bridge prefs, deleted the entire cache, rebuilt it by reindexing, exported the keywords from the old computer to the new, exported the cache to individual folders as well as a centralized cache. Nothing works. I'm faced with a long, hard job of re-applying keywords to 10,000 or so files.
Is there anything I can do?
Can anyone tell me why half my photographs have retained their keywords and the other half lost them? I thought keywords were embedded in the metadata, and that the metadata survived transportation from one system to another, and over the web, and so forth. It's dismayingto learn that I spent so much time working out a system for keywords, and applying them, only to find that I've got to do it all again.
I don't think it's anything to do with Windows 7 RC, which seems stable and well-behaved.
Mary

Curt
>Just to be clear CS4 you see some, but not all keywords, or in CS4 you see no keywords?<
I've made more sense of the problem. It's to do with Olympus Raw files - .orf. I've been shooting in Olympus camera raw since 2004.
My workflow is: import the raw files into Bridge via a card reader; rename them in Bridge as [filename].ORF, apply keywords, edit them in Adobe Camera Raw, save them as [filename].PSD (or sometimes .TIF or .JPG), move the PSDs to a working folder, edit them in Photoshop, and finally move them to a 'Finals' folder.
In Bridge CS3, in my old computer, I can see all keywords for ORF files. I can also see all keywords for the working and final PSDs, TIFs and JPGs.
In Bridge CS4, in my new computer, I cannot see any keywords for ORF files, or for the working and final PSDs, etc.
I can only see keywords for files which started life as TIFs - photos scanned with my negative scanner or flatbed scanner.
This is also true in both Bridge CS3 and Bridge CS4 in my new laptop, which is running XP Pro. I could see the keywords in my old laptop, but not in my new one.
>If you right click on file info in Bridge do you have the keyword listed in keyword box? Do the same with Windows Explorer and see if keyword is listed in Properties/details.<
'Keyword' isn't listed in Windows Explorer, though everything else under the sun is.
The keywords are listed if I right click in Bridge CS3 on a file in my old computer. And if I click on Advanced, and expand the categories, e.g. XMP or Dublin Core Props, I get a heading 'xap:Keywords (bag container)', and a list of all the keywords attached to the file.
But the same file in CS3 in the laptop, or CS4 in laptop or new computer, has no keywords in Advanced.
I've had a quick look on the web for topics connected with Olympus camera raw/orf/losing keywords, but so far haven't found anything.
Mary

How to export Fw CS3 Symbol Library to Fl CS3 ?

Is it possible to export Symbols created in Fireworks CS3 to
Flash CS3 Professional witout losing their properties?

Curt
>Just to be clear CS4 you see some, but not all keywords, or in CS4 you see no keywords?<
I've made more sense of the problem. It's to do with Olympus Raw files - .orf. I've been shooting in Olympus camera raw since 2004.
My workflow is: import the raw files into Bridge via a card reader; rename them in Bridge as [filename].ORF, apply keywords, edit them in Adobe Camera Raw, save them as [filename].PSD (or sometimes .TIF or .JPG), move the PSDs to a working folder, edit them in Photoshop, and finally move them to a 'Finals' folder.
In Bridge CS3, in my old computer, I can see all keywords for ORF files. I can also see all keywords for the working and final PSDs, TIFs and JPGs.
In Bridge CS4, in my new computer, I cannot see any keywords for ORF files, or for the working and final PSDs, etc.
I can only see keywords for files which started life as TIFs - photos scanned with my negative scanner or flatbed scanner.
This is also true in both Bridge CS3 and Bridge CS4 in my new laptop, which is running XP Pro. I could see the keywords in my old laptop, but not in my new one.
>If you right click on file info in Bridge do you have the keyword listed in keyword box? Do the same with Windows Explorer and see if keyword is listed in Properties/details.<
'Keyword' isn't listed in Windows Explorer, though everything else under the sun is.
The keywords are listed if I right click in Bridge CS3 on a file in my old computer. And if I click on Advanced, and expand the categories, e.g. XMP or Dublin Core Props, I get a heading 'xap:Keywords (bag container)', and a list of all the keywords attached to the file.
But the same file in CS3 in the laptop, or CS4 in laptop or new computer, has no keywords in Advanced.
I've had a quick look on the web for topics connected with Olympus camera raw/orf/losing keywords, but so far haven't found anything.
Mary

How to export height quality gif frm Flash CS3?

Hi,
When i export a .GIF movie from Flash CS3 , the movie quality is not good, here is some dot dots in the gif movie.
How to export height quality gif ? . Kindly explain pls as soon possible...
Thanks & Regards
Mohan

GIF is a color restricted format with on/off support for transparency. There's really no settings you can tweak to output a better GIF. You have a drop-down during GIF sequence export to allow transparency, select the amount of colors (up to 256) and you can choose dither to save a little filespace. The only 2 things in there that really matter are dither and amount of colors used to export.
If your content is very similar (e.g. not a lot of complex gradients/shadows/etc) and is limited in color use turning down the amount of colors used and dithering is your only option.
Make sure you're exporting the GIF via "Publish Settings" so you get a single animated GIF and not file->export->movie because this creates a separate sequence of GIF images for each frame.

How to export / import workspaces from CS3 to CS5

How to export / import workspaces and other preference settings from CS3 to CS5.

copy the files from
(username)/library/preferences/AICS3settings/en_us/workspaces
to
(username)/library/preferences/AICS5settings/en_us/workspaces

How to export sequence to P2 card?

Hi everybody
I saw a tutorial in Adobe webpage explaining how to export sequence back to P2 Card, as Premiere CS3.2 (updated) is able to recreate, from a edited timeline, all the folder and file system needed to be read on a P2 card under mxf format.
This can be a great way to export full resolution HD edited footage from one PC to another.
Unfortunately, I cannot find "export to P2" choice in my menu. I get export to Encore, to Tape, but no "P2" mention. But this mention appear in the Adobe tutorial... concernig any version from Premiere CS3.1
How comes this feature doesn't appear anywhere into the menu of my Premiere pro CS3, version 3.2?
Any clue?
Thanks

I found the link explaining how to do it.
http://livedocs.adobe.com/en_US/PremierePro/3.0/help.html?content=WSE32B8568-2904-4e95-861 A-F09F75AA6C7B.html
Here is what they say:
"Select the sequence or clip in the Timeline panel or Project panel.
(Optional) If exporting from the Timeline, set a timeline marker, numbered 0 on the frame you want used as the P2 icon for the exported.
If you do not set this marker, the first frame of the sequence will appear as the P2 icon by default.
Choose File > Export > Export To P2."
Problem is that: I don't get any "export to P2" at this place in my Premiere CS3.2

How to export all the site files to the new computer

I'll be buying a new computer soon and need to export all the
site files (usernames and passwords) to that. I know how to export
individual site information, but the passwords are encrypted. Also,
is there way to save all sites at once and then just transfer that
to the new machine?

This is a multi-part message in MIME format.
------=_NextPart_000_0039_01C852A0.8D4985F0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Choose Site > Manage Sites and then use the Export feature
in the Site =
Manager. You'll have an option to export all settings
(including =
username and password). DW stores them in .ste files, which
you can =
later use the Site Manager to Import.=20
By the way, the Import/Export features work with multiple
files, just do =
a multi-select before clicking the Export button and select
multiple =
.ste files when importing.
Best - Joe
Joseph Lowery
Vice President of Marketing, WebAssist
Author of Dreamweaver CS3 Bible
"Mikkola" <[email protected]> wrote in
message =
news:[email protected]...
> I'll be buying a new computer soon and need to export
all the site =
files=20
> (usernames and passwords) to that. I know how to export
individual =
site=20
> information, but the passwords are encrypted. Also, is
there way to =
save all=20
> sites at once and then just transfer that to the new
machine?
>
------=_NextPart_000_0039_01C852A0.8D4985F0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.6000.16587"
name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY>
<DIV><FONT face=3DArial size=3D2>Choose Site
> Manage Sites and then =
use the=20
Export feature in the Site Manager. You'll have an option to
export all =
settings=20
(including username and password). DW stores them in .ste
files, which =
you can=20
later use the Site Manager to Import.
</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>By the way, the
Import/Export features =
work with=20
multiple files, just do a multi-select before clicking the
Export button =
and=20
select multiple .ste files when
importing.</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Best -
Joe</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Joseph
Lowery<BR>Vice President of =
Marketing, <A=20
href=3D"
http://www.webassist.com">WebAssist</A><BR>Author
of <A=20
href=3D"
http://www.idest.com/dreamweaver/">Dreamweaver
CS3 =
Bible</A></FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>"Mikkola"
<</FONT><A=20
href=3D"mailto:[email protected]"><FONT
face=3DArial=20
size=3D2>[email protected]</FONT></A><FONT
face=3DArial =
size=3D2>> wrote=20
in message </FONT><A =
href=3D"news:[email protected]"><FONT=20
face=3DArial =
size=3D2>news:[email protected]</FONT></A><FONT=20
face=3DArial size=3D2>...</FONT></DIV><FONT
face=3DArial size=3D2>> =
I'll be buying a=20
new computer soon and need to export all the site files
<BR>> =
(usernames and=20
passwords) to that. I know how to export individual site
<BR>> =
information,=20
but the passwords are encrypted. Also, is there way to save
all <BR>> =
sites=20
at once and then just transfer that to the new=20
machine?<BR>></FONT></BODY></HTML>
------=_NextPart_000_0039_01C852A0.8D4985F0--

How to export app list in iTunes to csv or text file?

How to export an app list in iTunes libtary to csv,text, or Excel compatable file format?

Hi Peter,
I found out what caused the Script not running on CS3. In my workstation, there are multiple versions of ExtendScript Toolkit (cs, 2 and CS4). When I am working on the Script it default to the latest version which is ExtendScript Toolkit CS4, so it will refer to CS4, activate and launch CS4.
After pulling my hair finding the cause. I finally search and found ExtendScript Toolkit 2 which work for CS3. I shut down ExtendScript Toolkit CS4 and test the same exact Script . It works perfectly. So if you try to run this Script on CS3. Make sure at the prompt message to see if it will run on Adobe InDesign CS3, then it will run fine. In reverse, if you run the Script on CS4, make sure to check your ExtendScript Toolkit CS4 otherwise it will do nothing like I experienced. Great!
Below is my final code for the Script. This Script will capture all link elements' name as text file so I can search batch of elements from the central server for all pick up logos, images, artworks... to prep for my page assembly workflow. Hope this will help anyone have the same interest. All credit to Peter. Thank for all your help and support.
#target indesign;
try
link_name = app.documents[0].links.everyItem().name;
var f = app.documents.add ().textFrames.add ();
f.geometricBounds = [0.5,0.5,"266mm","203mm"];
f.contents = link_name.sort (caseless).join ("\r");
catch (_){}
function caseless (a, b)
return a.toLowerCase() > b.toLowerCase()
Kenn Nguyen

How to export a data as an XML file from oracle data base?

could u pls tell me the step by step procedure for following questions...? how to export a data as an XML file from oracle data base? is it possible? plz tell me itz urgent requirement...
Thankz in advance
Bala

SQL> SELECT * FROM v$version;
BANNER
Oracle DATABASE 11g Enterprise Edition Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE    11.1.0.6.0      Production
TNS FOR 32-bit Windows: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
5 rows selected.
SQL> CREATE OR REPLACE directory utldata AS 'C:\temp';
Directory created.
SQL> declare
2    doc DBMS_XMLDOM.DOMDocument;
3    xdata XMLTYPE;
4
5    CURSOR xmlcur IS
6    SELECT xmlelement("Employee",XMLAttributes('http://www.w3.org/2001/XMLSchema' AS "xmlns:xsi",
7                                  'http://www.oracle.com/Employee.xsd' AS "xsi:nonamespaceSchemaLocation")
8                              ,xmlelement("EmployeeNumber",e.empno)
9                              ,xmlelement("EmployeeName",e.ename)
10                              ,xmlelement("Department",xmlelement("DepartmentName",d.dname)
11                                                      ,xmlelement("Location",d.loc)
12                                         )
13                   )
14     FROM   emp e
15     ,      dept d
16     WHERE e.DEPTNO=d.DEPTNO;
17
18 begin
19    OPEN xmlcur;
20    FETCH xmlcur INTO xdata;
21    CLOSE xmlcur;
22    doc := DBMS_XMLDOM.NewDOMDocument(xdata);
23    DBMS_XMLDOM.WRITETOFILE(doc, 'UTLDATA/marco.xml');
24 end;
25 /
PL/SQL procedure successfully completed.
.

I'm trying to find out how to export my apple contacts to the Salesforce software and they need to be in a csv format and I don't know if this is possible and how to do it if it is?

I'm trying to find out how to export my apple contacts to the Salesforce software and they need to be in a csv format and I don't know if this is possible and how to do it if it is?

I think there are third-party programs which will do that, but you can also do it with Automator:
See the links in my post, here: https://discussions.apple.com/message/22390873#22390873
The file or clipboard contents will be in Tab Separated vars, so you'll have to open with a spreadsheet program and save as Comma Separated Vars format.

In SSMS after creating the query Report, how to export excel the same report from SSMS

for Beginners in SSMS after the report is created , how to export the same report to excel, I did try the option to task and export and follow the procedure, this procedure does not export the same report, the one was created, unless I am missing some steps,
is there a way to do just like we do in SSRS go to solution explorer, and properties and add the Target Server URL or not
in SSMS,
after I save the report it saves in project , can some one please guide me how to do it, and what steps I am doing wrong,
any help will be great. I am not technical person, just starting to learn from internet.
thanks in advance.

As you have said you are not a technical person try using Import Export wizard.
Refer this link
http://www.mssqltips.com/sqlservertutorial/203/simple-way-to-import-data-into-sql-server/
And another simplest one is to copy the result set from the query window. Right click the result and select "Copy with Headers".
Regards, RSingh

How to export best quality gif animations in flash

how to export best quality gif animations in flash

GIF is a color restricted format with on/off support for transparency. There's really no settings you can tweak to output a better GIF. You have a drop-down during GIF sequence export to allow transparency, select the amount of colors (up to 256) and you can choose dither to save a little filespace. The only 2 things in there that really matter are dither and amount of colors used to export.
If your content is very similar (e.g. not a lot of complex gradients/shadows/etc) and is limited in color use turning down the amount of colors used and dithering is your only option.
Make sure you're exporting the GIF via "Publish Settings" so you get a single animated GIF and not file->export->movie because this creates a separate sequence of GIF images for each frame.

How to export data with column headers in sql server 2008 with bcp command?

Hi all,
I want know "how to export data with column headers in sql server 2008 with bcp command", I know how to import data with import and export wizard. when i
am trying to import data with bcp command data has been copied but column names are not came.
I am using the below query:-
EXEC master..xp_cmdshell
'BCP "SELECT * FROM   [tempdb].[dbo].[VBAS_ErrorLog] " QUERYOUT "D:\Temp\SQLServer.log" -c -t , -T -S SERVER-A'
Thanks,
SAAD.

Hi All,
I have done as per your suggestion but here i have face the below problem, in print statment it give correct query, in EXEC ( EXEC master..xp_cmdshell @BCPCMD) it was displayed error message like below
DECLARE @BCPCMD
nvarchar(4000)
DECLARE @BCPCMD1
nvarchar(4000)
DECLARE @BCPCMD2
nvarchar(4000)
DECLARE @SQLEXPRESS
varchar(50)
DECLARE @filepath
nvarchar(150),@SQLServer
varchar(50)
SET @filepath
= N'"D:\Temp\LDH_SQLErrorlog_'+CAST(YEAR(GETDATE())
as varchar(4))
+RIGHT('00'+CAST(MONTH(GETDATE())
as varchar(2)),2)
+RIGHT('00'+CAST(DAY(GETDATE())
as varchar(2)),2)+'.log" '
Set @SQLServer
=(SELECT
@@SERVERNAME)
SELECT @BCPCMD1
= '''BCP "SELECT
* FROM   [tempdb].[dbo].[wErrorLog] " QUERYOUT '
SELECT @BCPCMD2
= '-c -t , -T -S '
+ @SQLServer +
SET @BCPCMD
= @BCPCMD1+ @filepath
+ @BCPCMD2
Print @BCPCMD
-- Print out below
'BCP "SELECT
* FROM   [tempdb].[dbo].[wErrorLog] " QUERYOUT "D:\Temp\LDH_SQLErrorlog_20130313.log" -c -t , -T -S servername'
EXEC
master..xp_cmdshell
@BCPCMD
''BCP' is not recognized as an internal or external command,
operable program or batch file.
NULL
if i copy the print ourt put like below and excecute the CMD it was working fine, could you please suggest me what is the problem in above query.
EXEC
master..xp_cmdshell
'BCP "SELECT * FROM
[tempdb].[dbo].[wErrorLog] " QUERYOUT "D:\Temp\LDH_SQLErrorlog_20130313.log" -c -t , -T -S servername '
Thanks, SAAD.

How to EXPORT a concurrent program from one instance to another

Hi,
I am new to EBS.
How to EXPORT a concurrent program from one instance to another. I dont want to use FNDLOAD.
Is there any other way from where we can export the concurrent program to anothere instance from CLIENT connection server.
Thanks
Asis

Hi;
What is EBS version? Why you dont use FNDLOAD?
Pelase see below thread
Move concurrent program to prod
Move concurrent program to prod
Regard
Helios

How to export Tabel? (Exporting and Importing of RFCDES table)

Hi,
We are doing system Refresh on qualitysystem,
I want to export the Tables and reimport them after system refresh
Tables like: RFCDES
How can export this table ?
How to import the table?
It is very urgent, Please give me the solution as soon as possible
Note: we are using BRTOOLS
Points awarded
Regards,
Ravi

Hi Ravi,
Create a control file like "rfcdes_export.ctl"
export
file '/usr/sap/data/export_rfc.dat
delete from rfcdes
select * from rfcdes
Take the export :
R3trans -w rfcdes_export.log rfcdes_export.ctl
Create the control file "rfc_import.ctl"
import
file '/usr/sap/data/export_rfc.dat'
Import it:
R3trans -w rfc_import.log -u 1268 rfc_import.ctl
Hope it will help you.
Best Wishes.
Kumar

How to export to CS3

Similar Messages

Maybe you are looking for