How to export user master data in SAP HANA?

We have a HANA server SP7 and we need to migrate it to a new server which will also be HANA SPS7. However the backup/restore approach is not to be used as confirmed by client. We are going to perform a export/import of all the important schemas. The question here is how to take an export of the users and roles in this scenario

Hi Meenu,
As Michael mentioned you can't export roles and users in a general way.
To add to it, you can always export users and roles if they are created used development workbench. That means if your developer has created any repository roles or users using development workbench or WebIDE you can export them by assigning those roles/privileges to a package/delivery unit. Make use of studio/HALM/CTS for that.
However to export users and roles created by admin workbench using gui can't be exported.
Happy HANA
**Deepak Chodha

Similar Messages

  • How to send User Master Data through XI

    Dear SAP gurus,
    We are currently configuring the e-recruiting module on a separate server than HR (following the SAP standard). 
    As our CUA is not connected to the E-REC systems, we are looking for a way to send properly the User Master Data from HR systems.  We have seen that the report RSCUSND enable us to send iDoc with message type USERCLONE, but this repport can be only run from the CUA then we can t use it.
    Another solution is to make a client copy with the profile SAP_USER, but we can t use this solution because in order to get the User Master Data in a real time we should make the copy each 15 minutes.
    We can t figure out with the question, what is the standard way to send User Master Data to our E-Recruiting module
    Regards
    Hadrien

    HR side:
    1-Below t-code is what you should go through:
    SM59
    BD64
    WE20
    WE21
    2-The key interface object is as below(I used it in LSMW, XI should be the same):
    Business Object      HRMASTER    
    Method               SAVEREPLICAMULTIPLE        
    Message Type         HRMASTER                   
    Basic Type           HRMASTER02                 
    XI side:
    1- The XI has the HR interface package in IR. You just need to select those you need.
    2-Goto ID and do interface mapping between IDOC interface & XI outbound interface
    All above is the skeleton processes. U can consult with XI consultant in details.
    Hope helpful..

  • How to download (export) user master data from java code

    Hi,
          I've an requirment. I need to export the user master through java code from a dual stack system
    The requirment is like an autmated of what we do in indentity management export.
    Thanks in advance
    Regards,
    mcsekar_21

    Solved it..
    Wrote a bean using UME factory, to download, upload and modify.

  • How to export user using date range

    Hia , i am using Oracle10g my object to export user (pibs) all tables in pibs have
    created_date column
    i wan to export user pibs using date range created_date between 01-jan-07 and 05-jan-07
    pls help me

    Check out the QUERY clause.
    http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14215/exp_imp.htm#CEGFIAGE
    If you're using Datapump, check out Filtering during export operations.
    http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_export.htm#g1022624

  • How to batch upload some data into SAP system?

    Hi All:
    I'm a SAP key user in our company, I want to know how to batch upload master data into SAP system? What t-code we can use for batch input?
    Thanks in advance!

    Hi,
    I think at least there are four methods for batch input which you can use in SAP system:
    Standard mass change t-code: for example, MM17 for mass change of material master data, you can find the mass change t-code under the relevant function module;
    T-code SCAT, you can use to record and generate the simple batch input template, it's easy to use for key user;
    T-code LSMW, it's another transaction to generate batch input template, it's often used at the beginning of SAP rollout;
    ABAP program, of course, ABAP is a universal tool for everything, you can use ABAP to generate a batch input program to upload data into SAP system as well.
    So you had better contact your SAP support department, help you to upload data!
    Good luck
    Tao

  • Export and import change document for user master data

    Dear Gurus,
    I have two queries on change document for user master data:
    1. Are there any approaches to export and import change document for user master data?
    We often do system copy from PRD to QAS for UAT and troubleshooting. Before system copy we export the user master data from QAS and then import after the copy process. We would like to keep the change document for user master data on QAS from being refreshed from PRD for security reason.
    2. Change document for Role change in QAS
    When the role is created or modified in DEV and then transported to QAS, the role change document doen't include this change log. The role change document in QAS only records those role changes directly made in QAS.
    Could you advise this is by SAP design or are there any approaches to record this transported role change  in the role change document in QAS?
    Thanks
    YBY

    1. Perhaps you want to consider a system copy to a "virtual system" for UAT?
    2. Changes in QAS (as with PROD as well) will give you the delta. They should ideally be clean... You need to check the source system.
    Another option is to generate the profiles in the target system. But for that your config has to be sqeaky clean and in sync, including very well maintained and sync'ed Su24 data.
    Cheers,
    Julius

  • How to upload the master data from legacy to SAP

    Hi Frends,
    how to upload the master data from legacy system to SAP System once the configuration is over.how to carry forward the open items of vendors and customers while uploading.who will upload functional consultantsor ABAPER.
    please clarify me
    Regards
    Sap Guru

    Hi ,
    use LSMW  or BDC for uploading Master & transaction data.
    This work is done by the Respective Functional team.
    Chandra

  • How to load master data from SAP R/3 system like Customer master...........

    How to load master data from SAP R/3 system like Customer master, materioal master , vendor master.............

    Hi Bramha,
            Check ...........
    Re: master data loading in BI 7.0
    /message/4708129#4708129 [original link is broken]
    Re: Master data loading.
    Regards,
    Vijay.

  • How to delete the sales org information from BP Master Data in SAP CRM 5.0

    Hi Guruu2019s
    How to delete the sales org information from BP Master Data in SAP CRM 5.0
    Thanks...
    Mahesh Pasupunuri

    Hello
    There is a report attached to [SAP Note 725857|https://service.sap.com/sap/support/notes/725857] that performs the deletion.
    Regards
    Joaquin

  • How to edit employee master data form in SAP B1 9.1?.

    Hi all,
    I have a problem in SAP B1 9.1.
    Is it possible to edit form of Employee Master Data in SAP B1 9.1 without creating an Add-On? Likes how other forms can be edited.
    Please anyone can help me.

    Hi Edey,
    Can you please refer to this link:
    How to create add-on of a system form in sap b1 9.0?
    or 9.1?.

  • How to load master data in sap bpc 7.0

    Hi ,
      how to load master data in sap bpc 7.0?plz give me the steps also?
    Thank u

    Hello Devi,
    There are three ways you can load Master Data in BPC
    1) Copy and paste.
    Download master data in flat file .Copy the  master data and paste in members of dimension after that process the dimension.
    2) Using SISS Pakage - load Flat File into BPC-Cube
    3) Using SQL Command.
    Thanks.
    With regards,
    Anand Kumar

  • Error : please mention output device in user master data

    I am new to ABAP development.I have created a smartform of address as a main window,then call the function module in a report program. When i run that report program, i m getting screen asking for output
    device saying "please mention output device in user master data".
    In main window, i have selected an address number whose details is to printed in the form,but instead of displaying the address, it's asking for output device.
    can you please tell me where lies the error & how to get rid of that?

    Hi Anupam,
    Refer this [wiki|https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/massAddressorLabelPrintinginSMARTFORMS]
    Regards,
    Sravanthi

  • UPLOAD MASTER DATA FROM SAP GL TO ACCOUNT DIMENSION

    hi
    how can i upload master data (chart of account) from BW 0GL account info object to BPC Account Dimension ?
    how can i upload the hierarchy, there is no hierarchy in ECC for the chart of account

    SAP offers free content + documentation in the form of rapid-deployment solutions (RDS). 
    In the Extended Financial Planning Rapid-deployment solution, there is a module called G/L Financial Planning which includes the full load of SAP-based account dimension from SAP ERP to BPC via BW. This content introduces BPC-based Package Links as a best practice way to load master data (including the account hierarchy and transaction data).  You can download the content and documentation from the highlighted page above or HERE.
    SAP also offers free training on the EPM rapid-deployment solutions in the EPM RDS Academy 2015 on SAP JAM. If the link to the Academy does not work, please register HERE and SAP will invite you.

  • Update Master Data From SAP R/3

    Hi ,
    Im new for CRM. How to upload the Master data ( Customer , Material ) to CRM.
    Any configuration possible .. pls let me know
    Prakash

    Hi Prakahs,
    You have to do a initial download in order to connect both systems and make data transfer process available.
    You can guide from SAP best practices allocated in:
    <a href="http://help.sap.com/bp_crmv340/CRM_DE/BBLibrary/html/BBLibrary.htm">http://help.sap.com/bp_crmv340/CRM_DE/BBLibrary/html/BBLibrary.htm</a>
    Please follow building blocks C73, B01, C71 y B09 in order to do it.
    Hope this helps
    Regards
    Javier Merino
    Please reward answer if you're satisfied.
    Message was edited by: Javier Merino Vivar

  • How to fill the master data in ecc

    Hi,
             0product_attr having zero records i ecc,how to fill the master data in ecc can you pls provide me the setps?
    Regrads,
    devi.

    Hi Devi,
    Loading data is ECC is not the part of BI Activities. Contact your functional consultant to load data. 
    BDC and LSMW both are used for loading data into SAP system.
    Or ask even directly they can create in ECC.  If it is for your testing purpose, it is better to ask them to create master in source system .
    Thanks
    BVR

Maybe you are looking for