How to export using DNxHD

I've seen many recommendations to use DNxHD for editing purposes.
However, being new to PrPro, I don't know how to export to DNxHD. In the Export Settings window, what option(s) should I choose from the Format drop-down list?

1. You need to familiarise yourself with the interface. See e.g. this help section.
2. Proxy is usually a lower resolution or a lower bitrate footage, with which you temporarily substitute a source footage. Speaking in general terms, PrPro creates proxies under the hood when and editor chooses to render a timeline preview.
Currently PrPro has some flaws in proxies workflow (e.g. it's impossible to relink a video file to an image sequence). Unlike PrPro, After Effects has a nice Placeholders and Proxies workflow, and some time ago I even posted a feature request proposal to introduce similar workflow in PrPro. Fortunately Adobe seems realised that proxy workflow doesn't harm native editing and is about to introduce some enhancement in the upcoming October release.
3. Motion check is a check on your story telling (whether you cut your timeline properly, whether motion graphics elements are animated properly etc.), within which details precision is not crucial.

Similar Messages

How to export a DNxHD file in AME

Im having a bit of a problem. I shot a music video, edited on Premiere, footage was 1080p(24fps) on 60d. I exported the vid using QuickTime and dnxhd as the codec. This gave me about a 6gb file for a 5 minute video. I then put that same file back into adobe media encoder to reexport to h.264, YouTube preset. Thats when the problem starts. While it is encoding something weird happens with the pixels. I see specks of green and yellow that show up on the video when it is done encoding. I tried resizing it to 720p but i got the same result. Can anyone tell me what im doing wrong?
Also is it normal for a 5 minute vid to be around 6gb when exported to dnxhd?
Export settings: QuickTime to DNxHD codec, re-export h.264 to YouTube preset(target bit rate 10, max 40)
Hp pavillion, i5 processor, 6gb of ram, ati radeon graphics
Any help is appreciated, thanks

Try to reflect on the following: you have something in PrPro timeline created out of original footages. You somehow can't export what is in the timeline to H.264 with satisfactorily quality. How adding an extra step to your workflow - exporting what is in the timeline to a digital intermediate - could improve the quality of your further render?
OK, let's move on. First AVCHD camcorders shot with 17 Mbps, nowadays AVCHD cameras shoot with up to 28 Mbps. You hardly need more. If you are not satisfied with the media file quality exported out of YouTube preset (by the way, how do you judge on quality?), start from H.264 HDTV preset. You can hardly be able to playback a movie with 32/40 Mbps in your media player smoothly, thus decrease it to e.g. 28 Mbps or even 17 Mbps.
Choose VBR, 2 Pass so as to get better quality out of smaller file size.
Tick Render at Maximum Depth, if your timeline contains some 32-bit effects.
Check if Maximum Render Quality improves or worsens the quality of your output.

How to export/use stereo guitar effects?

I have recorded on several Guitar Tracks . I used nice effects, like Dublin Delay & other preset guitar track setups. Delays and reverbs are usually stereo effects. But when I exported the tracks ( They are "stereo tracks", although of course recorded mono, from a single guitar) I noticed that both right and left channels are the same. So they are two exactly same mono files. How can I get stereo effects on guitar?

If you use an extreme stereo effect on your track, like a leslie for example, you should hear the difference. (I don't think you can see the result of a modest stereo effect in the waveform of your track).
One foolproof way to find out: Pan your track hard to the left or right and see if the exported file is dead center - which I can't imagine.
A possible reason for your export to sound "less stereo" is a setting in iTunes, like the "Sound Enhancement" option.

AVCHD to DVD: How to export using FCE

I've been using AVCHD for two years now. But when I burn it using the DV format the video thus not look the same from the AVCHD. What would be the best setting to use... Thanks in advance.

Funny thing happened I edited some HDef footage about 1.5 hours worth. I exported it as a QT file into my movies folder. Proceeded to open iDVD and the QT file was not available to import. Noticed QT file was 35gb. Is that why iDVD would not import? I cut a small piece about 1 min and exported it as a QT file and iDVD accepted it.
Is there a work around in FCx that would enable me to export a smaller file to work in iDVD?
I am so sorry for the explanation..I'm a Mac Newbe. Trial and error is taking sooooo much time....

How can I use the versionning tool to make a coherent solution to export

how can I use the versionning tool to make a coherent solution to export all objects used in my project to other db schema for testing as well as for implementation .
I want to know proper steps to Import/export objects.
while I am exporting my Master repository and work repository then again importing the all , no problem comes all the physical logical schema mapping and mapping between interfaces retains but
while I am trying to export and import one or two packages on the ease of testing then I am getting so many mismatches manually I am setting all why so?
required ur suggestion
Palash Chatterjee

kelly-bot wrote:
Thanks for the tip, but like I said, I dont want to always have to use the arrow keys. Is it not possible to actually DRAG one pixel at a time? I recently upgraded to CC from CS3 and I keep running into things that feel like a downgrade. Super disappointed.
Our posts overlapped there. Are you saying you could reliably drag one pixel with CS3?
What other issues are you having? Things like the Crop tool can feel strange at first, but I promise you you'll never want to use Classic mode once you get used to it.

How to export book pdf using custom presets for all book files in indesign using javascript

How to export book pdf using custom presets for all book files in indesign using javascript.

Hi jackkistens,
Try the below js code.
Note: you can change your preset name in below (e.g, Your preset name).
var myBook = app.activeBook;
myBook.exportFile(ExportFormat.PDF_TYPE, File (myBook.filePath+"/"+myBook.name.replace(/\.indb/g, ".pdf")), false, "Your preset name", myBook.bookContents, "Book_PDF", false);
example:
var myBook = app.activeBook;
myBook.exportFile(ExportFormat.PDF_TYPE, File (myBook.filePath+"/"+myBook.name.replace(/\.indb/g, ".pdf")), false, "[High Quality Print]", myBook.bookContents, "Book_PDF", false);
thx,
csm_phil

How to export and Import table of another user from user system using expdp

Hi All,
How to export a table 'scott.emp' from system user.
expdp system/password directory=expdp dumpfile=scott_emp.dmp ???? ?? tables=emp ??????????????????????????
thank you
---------------------------------------------------------- Posting solution here to make needed users not to scroll down ------------------------------------------------------
Finally I got it right!!!
Task :- Export table_1 of schema_a from database db1 and Import it to schema_b of database db2 as user other than schema owner
Solution :-
expdp system/pwd directory=expdp tables=schema_a.table_1 dumpfile=schema_a.table_1.dmp logfile=expdp_schema_a.table_1.log
impdp system/pwd directory=expdp tables=schema_a.table_1 dumpfile=schema_a.table_1.dmp logfile=impdp_schema_a.table_1.log remap_schema=schema_a:schema_b remap_tablespace=table_1_tablespace:schema_b_tablespace
Thank You All
Edited by: Ven on Mar 9, 2011 7:52 AM

Just a example
SQL> $expdp system/sys directory=data_pump_dir dumpfile=tests.dmp tables=scott.emp
Export: Release 11.2.0.1.0 - Production on Tue Mar 8 10:39:57 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Starting "SYSTEM"."SYS_EXPORT_TABLE_01": system/******** directory=data_pump_dir dumpfile=tests.dmp tables=scott.emp
Estimate in progress using BLOCKS method...
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 64 KB
Processing object type TABLE_EXPORT/TABLE/TABLE
Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
Processing object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
. . exported "SCOTT"."EMP" 8.570 KB 14 rows
Master table "SYSTEM"."SYS_EXPORT_TABLE_01" successfully loaded/unloaded
Dump file set for SYSTEM.SYS_EXPORT_TABLE_01 is:
C:\APP\MAZAR\ADMIN\ACEME\DPDUMP\TESTS.DMP
Job "SYSTEM"."SYS_EXPORT_TABLE_01" successfully completed at 10:40:01
SQL>

How to Export data from webdynpro using Jecxcel

Hi ,
Can anyone help me how to export data from web dynpro using Jexcel. kindly send me the related links.
Thanks

Hi Sandeep,
Have you refered in the blogs?
U can find may more document related to this.the below blog helps u in
Exporting Data from Web Dynpro in Different Formats Using Open Source (POI, JExcel, iText) APIu2019s.
https://www.sdn.sap.com/irj/sdn/index?rid=/library/uuid/b030e7fb-2662-2b10-0dab-c4aa52c3550b
Regards
Supraja

Re user tip: How can I import a homemade DVD into iMovie for editing? - I've followed instructions so far so good, until I get to "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. " How do I do that?

Re AppleMan 1958 excellent user tip: How can I import a homemade DVD into iMovie for editing? -
I've followed instructions with success until "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. " How do I do that?
I installed MGEG Streamclip 193b8 and used their utility to install quicktimempeg2 and got a message stating it was successfully installed. (I'm on latest Maverick 10.9.2 on iMac) Then I dragged the VIDEO_TS file from my home DVD into the streamclip app. It asked which of 4 files to use, and I selected the first one. Streamclip played the video with the sound. so far so good. but now I cannot figure how to use quicktime player 10.3 to export this vob file out of streamclip.

Thank you for your quick reply and for clearing up my confusion. I'm exporting the first section now. I choose the smallest size, 3x4 but I'd prefer to go higher as this DVD was originally a VHS home movie. I'm wondering if after three conversions (VHS,->DVD->MPEG) the resolution will be so poor as to not support a larger size frame? If it can, what size should I select when I export?

Export using Compressor - How?

I just got DVDSP, v3, and now the "Export>Using Compressor" menu option is available. When I selected it, I couldn't figure out how to get my files to be accessible in Compressor without first doing a "QuickTime Conversion".....
So, why and/or how the purpose for "Export>Using Compressor"???
Or do I even want to do this? From what I read on the forums, it sounds like I will get the best quality final product on my pushing-the-time-limits DVD that was shot with marginally acceptable quality video (DV) by tweaking the presets in Compressor. So that sounds like I need to get uncompressed files into Compressor (....and figure out how to "tweak" it....).
If I just drop a .fcp (Final Cut Express Movie File) into DVDSP, will there be any loss of quality vs using Compressor on its own first?
Well, I guess this shows my inexperience, to be sure, and I apologize to the forum for asking "newbie" questions....
Thanks in advance for the help!
CD

There are no batch send to Compressor, but you should be able to send them one after the other and set them off in the Compressor queue.
after I start the first one the system locks me out until it is finished.
Not sure what's happening here. What versions are you using? This doesn't happen for me. I can set a number of projects one after the other to Compressor, set the process, submit it, and return to FCP to set up the next one. The Compressor queue goes through them one after the other in the order in which they're submitted.

I have Adobe Elements 9 and I used to be able to export HD 1080p videos with no issue. But recently, when I export using H.264 MPEG or MPEG 2, which I normally used, the high resolution videos come out very choppy. How can i fix this?

I have Adobe Elements 9 and I used to be able to export HD 1080p videos with no issue. But recently, when I export using H.264 MPEG or MPEG 2, which I normally used, the high resolution videos come out very choppy. How can i fix this?

mr
Are you running the 9.0.1 Update of the program and on what computer operating system is it running?
Is your video card/graphics card driver up to date according to the manufacturer of the card?
Is your computer optimized, including maintenance of pile ups of preview files, conformed audio files, and conformed video files?
Do you have the latest version of QuickTime installed on your computer with Premiere Elements 9.0/9.0.1?
What are your project settings and what are the properties of your source media? When you say that "used to be able to export...." is that on the same computer, same brand/model/settings for the camera recording the video now in use, same Premiere Elements 9.0/9.0.1?
Where player are you using for the playback of these exports?
Please give us more details on the size of the projects (then and now) as well as details of the customized export settings in your Share/Computer/ route. Premiere Elements 9.0/9.0.1 is only a 32 bit application running in 32 bit or 64 bit system. Not sure if computer resources might be taxed more so now than before.
More later.
ATR

CTS+ - How to hide "export using Filesystem" from PI tool?

Hi experts,
I have already implemented "How To Configure Enhanced CTS PI 7.1", now I wonder If it is possible to hide export using Filesystem since I would like to force people using "Export using CTS" from PI tools.
I have alredy surfing on internet without luck : (
Could you pleas help with this?
Thanks in advance.

Hello Emili
The Exchange Profile parameters below control whether the "Transport Using File System" option is visible in the transport wizard. If you set the parameters to "false" (without the " and all in lower case) then this transport option will no longer be visible.
1) com.sap.aii.ibrep.core.transport.enableFileExport
2) com.sap.aii.ibdir.core.transport.enableFileExport
If these parameters do not already exist in the Exchange Profile, you can create them and set the value to false.
Regards
Mark

How to export&import data using sql *loader

Hi all,
How to export&import data from sql*loader. Give me the clear steps..
Thanks in Advance

Hi did you already exported data from SQL SERVER? if not using SQL*LOADER you cannot export data. SQL*LOADER is only mean for importing data from flat files(usually text files) into ORACLE tables.
for importing data into oracle tables using sql*loader use below steps
1) create a sql*loader control file.
it looks like as follows
LOAD DATA
INFILE 'sample.dat'
BADFILE 'sample.bad'
DISCARDFILE 'sample.dsc'
APPEND
INTO TABLE emp
TRAILING NULLCOLS
or for sample script of control file search google.
2) at command prompt issue following
$ sqlldr test/test
enter control file=<give control file name which you create earlier>
debug any errors (if occured)

How can we take the incremental export using the datapump at schema level.

Hi,
How can we take the incremental export using the datapump at schema level. Example, today i had taken the full export of one schema.
After 7 days from now , how can i take the export of change data , from the data of my full export.
using the export datapump parameter - FLASHBACK_TIME ,can we mention the date range. Example sysdate - (sysdate -7)
Please advice
thanks
Naveen.

Think of the Data Pump Export/Import tools as taking a "picture" or "snapshot."
When you use these utilities it exports the data as it appears (by default) while it's doing the export operation. There is no way to export a delta in comparison to a previous export.
The FLASHBACK_TIME parameter allows you to get a consistent export as of a particular point in time.
I recommend you go to http://tahiti.oracle.com. Click on your version and go to the Utilities Guide. This is where all the information on Data Pump is located and should answer a lot of your questions.

How to Export Table Data to a excel sheet using OPENROWSET

Hi Team,
I would like to Export table data to a excel sheet by using "OPENROWSET" command in SQL Server but I am getting the
below error message
Column name or number of supplied values does not match table definition.
Please help me on how to export the table data to an excel sheet by using "OPENROWSET" in SQL Server

I know this is old so I assume you've fixed this. However, for anyone else looking at this forum, I'd recommend using a union or a table join.
Select a.1, a.2, a.3 from a <where clause>
union
Select b.1, b.2, b.3 from b <where clause>
or
use a type of join.
If both table selects return the same number of columns but different data just reference them as a variable like fred, and Ted
Select fred.1, fred.2, fred.3 from (Select a.1, a.2, a.3 from a) fred
union
Select Ted.1, Ted.2, Ted.3 from (Select b.1, b.2, b.3 from b) Ted
or again some type of join of these two sets
Select * from
(Select a.1, a.2, a.3 from a) a
INNER JOIN (Select b.1, b.2, b.3 from b) b ON b.1 = a.1
This would give you 6 columns of data a1-3, and b1-3
We don't know from your description what format your spreadsheet is in. These just give you the idea. Think of the sub-selects as a Table. It's just named "fred". Once your select holds all the data you need, then export the data to the spreadsheet. Use
the horsepower of the database before trying to do a multple update of the same spreadsheet.
Does this give you enough to fix what you were trying to do?

How to export using DNxHD

Similar Messages

Maybe you are looking for