How to Exract the Data..

Hi Mark,
I am extracting the data from one table to another table from Oracle source. Everything went successful. The target table has been created in Target schmea. but it didn't populate the data. When I saw the code generated it has all insert statments to the target table. but I don't understand why it is not inserting into the target table. Could you please help me out.
Thanks in advance,
Srikanth

You may also want to run the mapping in debug mode (assuming you run version 9.2 or higher). This may explain why you do not get any records into the target.
Note that if you use an external table as a source and your data cannot be selected through the external table then you will never get any data. You can debug these issues by using the log and/or bad file options on the external table configuration.
Thanks,
Mark.

Similar Messages

How to pass the data from a input table to RFC data service?

Hi,
I am doing a prototype with VC, I'm wondering how VC pass the data from a table view to a backend data service? For example, I have one RFC in the backend system with a tabel type importing parameter, now I want to pass all the data from an input table view to the RFC, I guess it's possible but I don't know how to do it.
I try to create some events between the input table and data service, but seems there is no a system event can export the whole table to the backend data service.
Thanks for your answer.

Thanks for your answer, I tried the solution 2, I create "Submit" button, and ser the mapping scope to be "All data rows", it only works when I select at least one row, otherwise the data would not be passed.
Another question is I have serveral imported table parameter, for each table I have one "submit" event, I want these tables to be submitted at the same time, but if I click the submit button in one table toolbar, I can only submit the table data which has a submit button clicked, for other tables, the data is not passed, how can I achieve it?
Thanks.

How to select the data from a Maintainance View into an internal table

Hi All,
Can anybody tell me how to select the data from a Maintainance View into an internal table.
Thanks,
srinivas.

HI,
You can not retrieve data from A mentenance view.
For detail check this link,
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
Regards,
Anirban

How to download the data which is in the table?

how to download the data which is in the table?
every field data in the table i want to download and once the download is finished then i have to set the flag as 'download is finished ' as one field in table?
can any one help me in this.
Phani.
Edited by: phani kumarDurusoju on Jan 9, 2008 6:36 AM

One way is to Download the data Directly from the database table using the path SE11->Give table name ->Execute -> system ->List ->Save ->Local File
There u can downlaad the data .
The ither way is to use the code
The Following Code will be helpfull to You
Data :ITAB TYPE TRUXS_T_TEXT_DATA,
        FILE TYPE STRING.
         C_ASC     TYPE CHAR10   VALUE 'ASC',
DATA: L_STATUS TYPE C,
       L_MESSAGE TYPE PMST_RAW_MESSAGE,
       L_SUBJECT TYPE SO_OBJ_DES.
DATA: L_FILELENGTH TYPE I.
PERFORM download_to_pc
              TABLES
                 itab
              USING
                 filename
                 c_asc
                 c_x
              CHANGING
                 l_status
                 l_message
                 l_filelength.
FORM DOWNLOAD_TO_PC TABLES   DOWNLOADTAB
                    USING    FILENAME
                             FILETYPE TYPE CHAR10
                             DELIMITED
                    CHANGING STATUS
                             MESSAGE TYPE PMST_RAW_MESSAGE
                             FILELENGTH TYPE I.
DATA: L_FILE TYPE STRING,
        L_SEP.
L_FILE = FILENAME.
IF NOT DELIMITED IS INITIAL.
    L_SEP = 'X'.
ENDIF.
STATUS = 'S'.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      FILENAME                = L_FILE
      FILETYPE                = FILETYPE
      WRITE_FIELD_SEPARATOR   = L_SEP
    IMPORTING
      FILELENGTH              = FILELENGTH
    TABLES
      DATA_TAB                = DOWNLOADTAB
    EXCEPTIONS
      FILE_WRITE_ERROR        = 1
      NO_BATCH                = 2
      GUI_REFUSE_FILETRANSFER = 3
      INVALID_TYPE            = 4
      NO_AUTHORITY            = 5
      UNKNOWN_ERROR           = 6
      HEADER_NOT_ALLOWED      = 7
      SEPARATOR_NOT_ALLOWED   = 8
      FILESIZE_NOT_ALLOWED    = 9
      HEADER_TOO_LONG         = 10
      DP_ERROR_CREATE         = 11
      DP_ERROR_SEND           = 12
      DP_ERROR_WRITE          = 13
      UNKNOWN_DP_ERROR        = 14
      ACCESS_DENIED           = 15
      DP_OUT_OF_MEMORY        = 16
      DISK_FULL               = 17
      DP_TIMEOUT              = 18
      FILE_NOT_FOUND          = 19
      DATAPROVIDER_EXCEPTION = 20
      CONTROL_FLUSH_ERROR     = 21
      OTHERS                  = 22.
IF SY-SUBRC <> 0.
    STATUS = 'E'.
    CASE SY-SUBRC.
      WHEN 1.
        MESSAGE = 'gui_download::file write error'.
      WHEN 2.
        MESSAGE = 'gui_download::no batch'.
      WHEN 3.
        MESSAGE = 'gui_download::gui refuse file transfer'.
      WHEN 4.
        MESSAGE = 'gui_download::invalid type'.
      WHEN 5.
        MESSAGE = 'gui_download::no authority'.
      WHEN 6.
        MESSAGE = 'gui_download::unknown error'.
      WHEN 7.
        MESSAGE = 'gui_download::header not allowed'.
      WHEN 8.
        MESSAGE = 'gui_download::separator not allowed'.
      WHEN 9.
        MESSAGE = 'gui_download::filesize not allowed'.
      WHEN 10.
        MESSAGE = 'gui_download::header too long'.
      WHEN 11.
        MESSAGE = 'gui_download::dp error create'.
      WHEN 12.
        MESSAGE = 'gui_download::dp error send'.
      WHEN 13.
        MESSAGE = 'gui_download::dp error send'.
      WHEN 14.
        MESSAGE = 'gui_download::ubknown dp error'.
      WHEN 15.
        MESSAGE = 'gui_download::access denied'.
      WHEN 16.
        MESSAGE = 'gui_download::dp out of memory'.
      WHEN 17.
        MESSAGE = 'gui_download::disk full'.
      WHEN 18.
        MESSAGE = 'gui_download::dp timeout'.
      WHEN 19.
        MESSAGE = 'gui_download::file not found'.
      WHEN 20.
        MESSAGE = 'gui_download::dataprovider exception'.
      WHEN 21.
        MESSAGE = 'gui_download::control flush error'.
      WHEN 22.
        MESSAGE = 'gui_download::Error'.
    ENDCASE.
ENDIF.
ENDFORM.             "download_to_pc
At The End Reward points.
Please it's Required.
Thanks ,
Rahul

How to add the date field in the dso and info cube

Hi all.
I am new to bi 7. in the earlier version v hav to button to add the date field. but in the bi 7 der is no option so can any body tell me how to add the date field in the data targets
Thanks & Regard
KK

my prob is solved
KK

How to read the data in excel sheet

Dear sir,
How to read the data in excel sheet when i recieve a data serial communication... ie i have store a data in excel such that
Cell A Cell B
A Apple
B Ball
C Cat
D Doll
when i recieve A from serial communication i have to display Apple, and when i recieve B i have to display Ball and so on..

Hi,
I would recommend you to have a look at the VI attached. It makes use of a VI named 'Read from Spreadsheet' to read the row and column data from the tab delimited excel file. The read data is then searched for the Alphabet specified and finally returns you the corresponding string. The test file used to validate the operation of the VI is also attached.
Trust this would help you solve the issue.
Regards,
Sagar G Yadav | Application Engineer | National Instruments
Attachments:
read_from_excel.vi ‏10 KB
Book1.txt ‏1 KB

How to get the data from multiple nodes to one table

Hi All,
How to get the data from multiple nodes to one table.examples nodes are like A B C D E relation also maintained
Regards,
Indra

HI Indra,
From Node A, get the values of the attributes as
lo_NodeA->GET_STATIC_ATTRIBUTES( IMPORTING STATIC_ATTRIBUTES = ls_attributesA ).
Similarily get all the node values from B, C, D and E.
Finally append all your ls records to the table.
Hope you are clear.
BR,
RAM.

How to get the data from pcl2 cluster for TCRT table.

Hi frndz,
How to get the data from pcl2 cluster for tcrt table for us payroll.
Thanks in advance.
Harisumanth.Ch

PL take a look at the sample Program EXAMPLE_PNP_GET_PAYROLL in your system. There are numerous other ways to read payroll results.. Pl use the search forum option & you sure will get a lot of hits..
~Suresh

How to get the data from Pooled Table T157E.

Hi Experts,
How to get the data from Pooled Table T157E.
Any help.
Thanks in Advance,
Ur's Harsha.

create some internal table similar to T157E and pass all data as per SPRAS.
After that use internal table in your program as per the requirement.
Regds,
Anil

How to bring the data from application server to presentation server

hi,
i have one problem,i have written the program which will open the files in the application server when we run the program in the background(sm37),the same data from application server i want to bring into presentation server in the format of (.csv),how to bring the data from application to presentation server can any body help me on this topic.folowing is the code .
*& Report ZPFA_HIER_LOAD
REPORT ZFPA_HIER_LOAD.
*---- Declaration of Oracle connectioN
DATA con_name LIKE dbcon-con_name VALUE 'COMSHARE'.
DATA: MFL1(9),MFL2(5),MFL3(9),MFL4(2),MFL5(8) TYPE c.
DATA : mfilename type string.
data: begin of matab1 occurs 0,
      MFL1(9) TYPE C,
      MFL2(5) TYPE C,
      MFL3(9) TYPE C,
      MFL4(2) TYPE C,
      MFL5(8) TYPE C ,
     end of matab1 .
data: setid(8) type c.
data: begin of source occurs 0,
      setid(8) type c,
      end of source.
*PARAMETERS : p_pfile LIKE filename-FILEEXTERN.
*PARAMETERS : m_bsenty(8). " type c obligatory.
*mfilename = P_PFILE.
EXEC SQL.
SET CONNECTION :con_name
ENDEXEC.
EXEC SQL.
CONNECT TO :con_name
ENDEXEC.
EXEC SQL PERFORMING get_source.
SELECT set_id FROM UNIT_SET INTO
:setid
ORDER BY SET_ID
ENDEXEC.
start-of-selection.
LOOP AT SOURCE.
REFRESH matab1. CLEAR matab1.
EXEC SQL PERFORMING evaluate.
SELECT TO_CHAR(MEM_ID),TRIM(TO_CHAR(MEM_PID)) FROM UNIT_TREE INTO :MFL1,
:MFL5
where set_id = :SOURCE-SETID ORDER BY MEM_ID
ENDEXEC.
if SOURCE-SETID = '80000000'.
   mfilename = '/tmp/aesorg'.
elseif SOURCE-SETID = '80000006'.
   mfilename = '/tmp/Consolidation_Manager'.
elseif SOURCE-SETID = '80000010'.
   mfilename = '/tmp/10org'.
elseif SOURCE-SETID = '80000012'.
   mfilename = '/tmp/20org'.
elseif SOURCE-SETID = '80000018'.
   mfilename = '/tmp/30org'.
elseif SOURCE-SETID = '80000025'.
   mfilename = '/tmp/40org'.
Endif.
mfilename = '/usr/test.dat'.
************************This was i tried***********************
open dataset mfilename for output in text mode encoding default." IN
*TEXT MODE ENCODING DEFAULT.
if sy-subrc <> 0.
exit.
endif.
close dataset mfilename.
CALL FUNCTION 'GUI_DOWNLOAD'
   EXPORTING
     FILENAME         = MFILENAME
     FILETYPE         = 'ASC'
   TABLES
     data_tab         = matab1
   EXCEPTIONS
     file_write_error = 1
     invalid_type     = 2
     no_authority     = 3
     unknown_error    = 4
     OTHERS           = 10.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
clear matab1.
ENDLOOP.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
close dataset mfilename.
     MFL5 = '0'.
   CLEAR MFL5.
FORM evaluate.
if MFL5 = -1.
    MFL5 = ''.
ENDIF.
concatenate MFL1 ','   into MFL1.
concatenate MFL1 ','   into MFL3.
matab1-MFL1 = MFL1.
matab1-MFL2 = 'ZBUE,'.
matab1-MFL3 = MFL3.
matab1-MFL4 = ' ,'.
matab1-MFL5 = MFL5.
append matab1 .
CLEAR MFL1.
CLEAR MFL2.
CLEAR MFL3.
CLEAR MFL4.
CLEAR MFL5.
ENDFORM.
                 "evaluate
*&      Form GET_SOURCE
      text
FORM GET_SOURCE.
source-setid = setid.
append source.
clear source.
ENDFORM.                    "GET_SOURCE

Hi Rammohan,
You cannot use OPEN DATASET to transfer data from application server to presentation server.
You can do the following :
<b>Do 1st point in BACKGROUND</b>
1. Read the data file from application server into an internal table using OPEN DATASET
<b>Do 2nd point in Foreground</b>
2. Once you get the data into an internal table, then use FM GUI_DOWNLOAD to download it on presentation server
You cannot use the above 2 point together in Background because its not possible. Hence you need program it partially in background and partially in foreground.
Best regards,
Prashant

How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

If the data is on a remote server (for example, PHP running on a web server, talking to a MySQL server) then you do this in an AIR application the same way you would do it with any Flex application (or ajax application, if you're building your AIR app in HTML/JS).
That's a broad answer, but in fact there are lots of ways to communicate between Flex and PHP. The most common and best in most cases is to use AMFPHP (http://amfphp.org/) or the new ZEND AMF support in the Zend Framework.
This page is a good starting point for learning about Flex and PHP communication:
http://www.adobe.com/devnet/flex/flex_php.html
Also, in Flash Builder 4 they've added a lot of remote-data-connection functionality, including a lot that's designed for PHP. Take a look at the Flash Builder 4 public beta for more on that: http://labs.adobe.com/technologies/flashbuilder4/

How to store the data coming from network analyser into a text or excel file

Hii everyone
I'm using Agilent 8719ET network analyser and wish to store the data coming from netowrk analyser into a text file/ excel file.
Presently I'm able to get the data on Labview graph using GPIB . Can anyone suggest how to go ahead after collect data sub vi. How can the data be stored into a file apart from showing on the graph?
Attached is the vi for kind consideration...
Looking for help
Regards
Rohit
Attachments:
Agilent 87XX Series Exceed Max Meas.vi ‏43 KB

First let me say that your code really looks pretty good. The data handling could be made more efficient by calculating the number of datapoints that are going to be in the completed dataset and preallocating the entire array -- but depending upon your answer to my questions, the logic in the lower shift register may be going away - so we won't worry about that right now.
The thing I need to know before addressing the data storage question is: Each time you call "Collect and Display Data.vi", how many element are in the array? Are you reading single data points, or a group of data? (BTW: if the answer to that question is obvious based on the way the other VIs are setup, I don't have the drivers so I can't tell what the setup values are.) Second, how fast does the loop iterate? Are we talking msec per loop?, seconds? fortnights?
The issues here are two-fold: how much data? and how fast is it coming? The answer to these will tell you how to save the data.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How to validate the dates in the table control ?

How to validate the dates in the table control ?
Can I write like this ?
LOOP AT it_tab .
CHAIN.
FIELD : it_tab-strtdat,it_tab-enddat.
module date_validation.
ENDCHAIN.
ENDLOOP.
Module Date_validation.
ranges : vdat type sy-datum.
vdat-sign = 'I'.
VDAT-LOW = it_tab-STRTDAT.
VDAT-HIGH = it_tab-ENDDAT.
VDAT-OPTION = 'BT'.
APPEND VDAT.
WHAT CODE I have to write here to validate ?
and If I write like this How can we know which is the current row being add ?
It loops total internal table ..?
Bye,
Muttu.

Hi,
I think there is no need to put chain endchain.
To do validation you have to write module in PAI which does required validations.
Thanks
DARSHAN PATEL

How to delete the date in podcast or blog page?

Hi,
I would like to delete the dates showing on the first page of my podcast and blog pages - how do i do this in iWeb?
Thank you for your help!
Boaz

You don't want to delete that date as it will affect RSS feeds, etc. However you can hide the date. See this topic: How to make the 'date' disappear on the...: Apple Support Communities
OT

How to delete the data in the compressed infocube

hi, bi gurus
we are facing a problem in inventory management the info cube in BW production
normally every time inventory cube gets compressed that means the data will be moving to F fact table to E fact table
now the problem is we are having some bad data for latest five requests in this cube as we all know compressed data
can't be delete by deleting request in the request tab the only way is go for selective deletion but i don't find any selective
option in the cube we are PSA data for that five request which having correctdata please help how to delete the bad data in the
info cube and load the correct data which we are having in PSA
Thanks
Joe

Hi André
Thanks you for ur answer
what i am telling is their is an option for selective deletion for inventory cube
but i don't find any specific option to delete the data that means like calendar day like that
i hope you got my question.
hi Saveen Kumar,
Thank you again
we are using 3.xx flow if we do the request reverse posting for all the 5 requests which has updated incorrect data
next we need to do compression also or not
and how to reload the data from PSA to Infocube becuse if request still avaliable in info cube it will not allow me to do that
can you please tell me detail how to proceed in step by step this is first time i am doing request reverse post and i have to do it production please tell me
Thanks in adavance
Thanks,joe

How to Exract the Data..

Similar Messages

Maybe you are looking for