How to extend 0CRM_MKTELM by CRM 4.0?

Does anybody know how it is possible to extend 0CRM_MKTELM, which is loaded directly from CRM server?
I've put 2 new fields in trade promotions mask in CRM (sell in and sell out date) and now I need to populate the corresponding infoobjects in BW.
Thanks for any suggestion, Paolo

Roberto,
you joke?
With CRM no data source, no enhancement ecc.
0CRM_MKTELM is loaded directly with a push technology from CRM server through mapping structures (via spro)
Bye, Paolo

Similar Messages

How to extend an IDOC in CRM

Hi,
Can we extend an IDOC in CRM, I am new to the era of CRM and I got a requirement to extend an IDOC TYPE and
when I try to extend the IDOC TYPE in CRM as how we do in R/3 the system displays message as "Action is not possible for generated IDOC types. Can any one suggest
what could be the problem.
or is there any alternative way to Extend IDOCS in CRM.
Thanks,
Venkat

You can do that. Go to transaction we30, create an extension to the Basic type. Create the segments. And you are done.
You can refer to help.sap.com for more information.
Award points if it helps you.
Regards,
- Prasenjit

How to Extend BUPA_MAIN BDOC

HEllo Friends,
I got a requirement to extend BUPA BDOC. I need to send company details to R/3 system.
Can anybody send me the steps how to extend BDOC and the remaining mappings and functionmodule.
Note. I cannot extend R3 system tables.
I need to map existing fields of R3 to EEWB fields of CRM.
I am new to this Middleware.
Regards
Satish

Hi Satish,
This is very simple.
Follow the steps below:
1. Create custom fields using EEWB and check R/3 check box during the EEWB run.
2. The BDoc will be updated automatically by EEWB
3. Write a Mpping exit on CRM side: SMOUTIL2. In this exit you insert a new line in BAPIMTCS for you fields
4. Write a Mapping exit on ECC side: CRM0_100. Here you read the line from BAPIMTCS and store into respective ECC fields.
You can also find stuff on how to implement the above Exits on sap help or service market place.
Please let me know if it helps.
Regards,
Sharif.

Tutorial about how to extend the bdoc activity_object with own segments

Hi!
We had lots of problems with the things described in this subject here.
Worse: We can't solve the problems and now we're going another way for our mobile-crm-solution...
Are there any how-to-guides or tutorials anywhere online about how to extend standard bdocs with own segments?
How-to-guides about mbdocs and sbdocs and how they are playing together?
Thanks a lot in advance.
Best regards,
Ingo

Hi lngo,
I would suggest you use EEWB to enhance the Activity object. There is the provision of enhancing the Mobile sbdocs directly from EEWB.
This way you don't have to spend lots of efforts in developments.
When you create extension in EEWB, for input fields select the appropriate values mention below:
EEW Bus. Obj: BUSINESS_ACTIVITY
Extension Type: ACTIVITY_H
On Next Screen enter screen title and press continue.
On Next screen select 'Business Activity' and continue.
Enter the fields required on next screen and continue.
Further on next screen define if fields should be releavant for header, item or both.
and on the next screen select 'Mobile' so that sbdocs are accordingly modified.
Best Regards,
Pratik Patel.
Reward with points if it is of any help to you!

How to extend the WebUI product search results with customer attributes

Hello,
We are using CRM 7.0. We want to extend the WebUI product (Object) searches with customer attributes and to display customer attributes in the search results. We found the note 1026956 that explains how to extend the WebUI product (Object) searches with customer attributes. We want to know if there is also some note that explains how to display customer attributes in the search results for products/Objects.
Thanks in advance,
Sergey Kozyrev

Sergey,
I doubt whether there exists such note. The note 1026956 which you mentioned is for enhancing the Search for Custom attributes. For Enhancing the Result list you need to do custom development.
Regards,
Harshit

How To Extend Adobe Audition CS5.5

I've received a number of questions on how to extend Adobe Audition with questions similar to:
How do I import file format X?
How do I import a project from application Y?
Will there be an SDK available?
How do I add plug-ins to Audition?
I had made a post similar to this in the public beta of Audition for Mac, but I can no longer find the thread. So I'll reiterate some stuff here:
Area
Info
Adding VST Plug-Ins
Most of you have found this already, but the best place to start is in the Audio Plug-In Manager
If you want to "write" new plug-ins for Audition, writing a VST plug-in will be the best option as it will allow you to write something that will work on Windows as well as OSX. Info on writing a VST plug-in may be found here (http://www.steinberg.net/en/company/developer.html)
Adding Audio Unit Plug-Ins (Mac OSX)
Same as Above.   Note that OSX ships with some built-in AU plug-ins that Audition can utilize for free if you just scan at least once.   We don't scan on startup because there's several plug-ins out there in the world that don't behave well. Info on Audio Unit plug-in development can be found here (http://developer.apple.com/library/mac/#documentation/MusicAudio/Conceptual/AudioUnitProgr ammingGuide/TheAudioUnit/TheAudioUnit.html)
Adding more import formats via libsndfile
libsndfile is an open-source C library for reading and writing audio files (http://www.mega-nerd.com/libsndfile/)   Ambitious people could download the source, write support for another format, and create their own custom-rolled library of libsndfile. You would then replace the version of libsndfile with which Audition CS5.5 ships, with the one you rolled.   Due to the way we use libsndfile, any format you add would show up in Audition.   This is also true if there's an official update to libsndfile that comes out in the future, you could just plop it in and it should work.
If you're interested in exporting or writing formats that libnsdfile supports, please tell us which formats are the most important to you and in what way you use them in your workflow.
Adding more import formats via QuickTime components
QuickTime has the ability to be extended via QuickTime Components.   There's several examples out there, but here are some websites to check out:
QuickTime Components (http://www.apple.com/quicktime/resources/components.html)
Learn about even more QuickTime capabilities (http://www.apple.com/quicktime/extending/components.html)
Flip4Mac for Windows Media support on OSX (http://www.telestream.net/flip4mac-wmv/overview.htm)
Perian -- the swiss-army knife for QuickTime (http://perian.org/)
Calibrated Software (http://www.calibratedsoftware.com/products.asp)
In most cases, just adding the various QuickTime components will automatically add the import functionality to Audition.
Importing project formats from other applications
As seen on other threads in this forum, Ses2sesx (http://www.aatranslator.com.au/ses2sesx.html) and AATranslator (http://www.aatranslator.com.au/) seem to add quite a bit of support.
SDK
At this time, we haven't released an SDK for Audition.   If you're interested in one, however, please tell us what you would want from an SDK for Audition and we'll take it into consideration.
Message was edited by: Charles VW
Added links to AU and VST development info

Charles,
could you please also advise what PC users can do to make common avi files useable in AA CS5.5? The obvious problem is, no matter how many exotic video formats a PC can play by way of video-for-windows codecs, these are useless for Quicktime, because Quicktime on the PC needs codecs specifically written for "Quicktime for Windows", which are, as I've come to find, EXTREMELY rare. So far I've only found ONE, sold by 3ivx, but this costs as much as the AA CS5.5 update itself. Without them, Quicktime on the PC will only handle mov files, which are not too popular on the PC. Is there any other way out of this?

Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
could you tell me how best to set airport express up to extend my wifi range?

Greetings,
This is called an "Extended wireless network".
Read this article for details and steps on how to extend your TimeCapsule's network:
http://support.apple.com/kb/HT4259
Cheers.

How to extend an address of a BP with more fields ???? EEWB??

Hi Gurus,
I need to extend the address of a BP with some customer fields. I have tried to do it using EEWB but when you have to choose a Business Object for the new extension, the reasonable only possibility is to choose BUPA Object. Thus, the DB table BUT000 is extended with a custom include that contains the customer fields, but what I want to do is extending ADRC DB table. There is some way that I do not know of achieve this in which the system creates automatically all the FM for the BDT events????
If it is not possible, which would be the procedure to do that with my own development???
Thanks in Advance.
Regards,
Rosa

Rosa, you can only extend table BUP000 and not the actual address table. Sorry for that for more details on how to extend the BP itself refer to my WeBLOG I wrote on this. Have fun and let me know whether you need more help, Tiest.
Also do not forget to award points to useful responses.
<a href="/people/tiest.vangool/blog/2005/07/24/pc-ui-and-easy-enhancement-workbench-eew-integration and Easy Enhancement Workbench (EEW) Integration</a>

How can we process the CRM Order again for second time in debugging mode

Hi,
Can anybody please tell me how can we process the CRM ORDER for second time. that I want to process in debugging mode.
Thanks,
bsv

Hi bsv,
Are you trying to reprocess a BDOC for debugging purpose?
If the BDOC is not with a final status, you will be able to reprocess it using the reprocess button in the smw01 search result list.
And you may put /h on the popup when you click on the 'reprocess' button.
If it is allowed to make some changes in the CRM ORDER for testin purpose, it would be easier to perform debugging.
A more 'careless' way is to deactivate the outbound or inbound queue in transaction smqs or smqr, then in smq1 or smq2 to locate the interested queue, and click on button 'debug LUW'.
Hongyan

How to debug proxies in CRM when called from ECC system

Hi,
My requirement is When a Post Goods Issue happens in ECC, the iobject is created in CRM system.
The proxy is called in the ECC system. The implementation of the proxy is done in the CRM system.
I am able to debug and see that the values are passed correctly to the proxy.
In CRM system, the iobject is not created. So, i wanted to debug the implementation which is available in the CRM system.
How can i debug in CRM system while the Post Goods Issue is done in the ECC system.
Thanks in advance.
Regards
Shanthi

hi , if you want to debug through ERP to CRM , you need to set a external breakpoint in CRM
And to set the external breakpoint, you need to login CRM system by the middleware user, not a normal user.
To check the middleware user name, you can search the view CRMRFCPAR in sm30 ERP, find out the RFC destination to CRM, then check the user used in the RFC destination in SM59

How to Configure PME in CRM 7

Team,
Greetings for the day..
could any one please provide some lights on "how to configuring PME in CRM 7".
currently we have installed CRM7 IDES (ABAP / JAVA stacks in 2 different instances under single Host).and need to configure PME.
CRM functional team trying to configure PRODUCT and its giving "PME installation with Errors".
Please help in this regard.
Regards,
Nagarjuna Gorantla

Hi Naga,
Please check the following links...
http://help.sap.com/saphelp_crm60/helpdata/en/46/4a4296a9dc6a82e10000000a155369/content.htm
http://help.sap.com/saphelp_crm60/helpdata/en/46/540b2405a05e40e10000000a11466f/content.htm
As mentioned in the link PME was replaced with ebClient user interface...

In an inbuild example of can .. that CAN transmit periodic vi .. i am unable to understand how the extended and standard frame is set?

In an inbuild example of can .. that CAN transmit periodic vi .. i am unable to understand how the extended and standard frame is set?
plz help me .. stuck up very badly
thanks
mahadev
Solved!
Go to Solution.

I suggest this KB which explains usage of Ext IDs with NI-CAN
http://digital.ni.com/public.nsf/allkb/2FA120A37EDBC51D86256854004FB0C7

How to link Documents to CRM

Hi
Can anyone please suggest on how to link Documents to CRM CIC0 screen.
Thanks in Advance

Hi,
This is possible thru the following way..
CONSTANTS: c_fix_url TYPE string VALUE 'http://10.100.18.201:8080/archive?get&pVersion=0045&',
             c_fixed_val1 TYPE string VALUE 'contRep=',
             c_fixed_val2 TYPE string VALUE '&docId='.
CONCATENATE c_fix_url
              c_fixed_val1
              archiv_id
              c_fixed_val2
              arc_doc_id
              INTO l_url_doculink.
CALL METHOD cl_gui_frontend_services=>execute
    EXPORTING
      document = l_url_doculink
    EXCEPTIONS
      OTHERS   = 1.
Thanks
Parvathi

Outlook 2013 - How to extend/add new meeting in recurrent meeting inside SharePoint site ?

I have created a recurrence meeting but now it is exired, how to extend ? Please advise

Hi,
Please check the link below
https://support.office.com/en-us/article/Create-link-to-or-update-Meeting-Workspaces-98834566-4750-45e9-bb71-fe4acb26f170?ui=en-US&rs=en-US&ad=US#BM2
https://social.technet.microsoft.com/Forums/sharepoint/en-US/01054bef-1cb0-4401-88c9-e4593ab4b806/how-to-extend-date-in-recurring-meeting-workspace-in-sharepoint-site?forum=sharepointgenerallegacy
Please remember to click 'Mark as Answer' on the answer if it helps you

How does the integration between CRM and SD occur

How does the integration between CRM and SD occur? Is only via ALE and are there config steps in CRM to ensure the correct data mapping between CRM and SD?
So, if I create an order or quote in CRM how is it then created in SD? Or do they share the same data store.
thanks

Hi John,
Here is good documentation regarding Data Exchange for Sales Transactions: the CRM Enterprise and the ERP System are two different repositories, If you create the Sales Order in CRM then they will be replicated into SD (using CRM Middleware, BDoc's)
http://help.sap.com/saphelp_crm60/helpdata/en/52/2d0c38941e5666e10000009b38f8cf/frameset.htm
Also you can check the best practice guide for CRM 2007 there you have plenty of information
http://help.sap.com/bp_crmv12007/CRM_DE/HTML/index.htm
Hope this help,
Regards,
Ramon

How to extend 0CRM_MKTELM by CRM 4.0?

Similar Messages

Maybe you are looking for