How to extend an address of a BP with more fields ???? EEWB??

Hi Gurus,
I need to extend the address of a BP with some customer fields. I have tried to do it using EEWB but when you have to choose a Business Object for the new extension, the reasonable only possibility is to choose BUPA Object. Thus, the DB table BUT000 is extended with a custom include that contains the customer fields, but what I want to do is extending ADRC DB table. There is some way that I do not know of achieve this in which the system creates automatically all the FM for the BDT events????
If it is not possible, which would be the procedure to do that with my own development???
Thanks in Advance.
Regards,
Rosa

Rosa, you can only extend table BUP000 and not the actual address table. Sorry for that for more details on how to extend the BP itself refer to my WeBLOG I wrote on this. Have fun and let me know whether you need more help, Tiest.
Also do not forget to award points to useful responses.
<a href="/people/tiest.vangool/blog/2005/07/24/pc-ui-and-easy-enhancement-workbench-eew-integration and Easy Enhancement Workbench (EEW) Integration</a>

Similar Messages

How do i print address returns on envelopes with hp officejet pro 8500

how do i print address returns on envelopes with hp officejet pro 8500

This is done with your software that you have to print the envelopes. MS Word can do this, just use their help facility.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

How to extend the WebUI product search results with customer attributes

Hello,
We are using CRM 7.0. We want to extend the WebUI product (Object) searches with customer attributes and to display customer attributes in the search results. We found the note 1026956 that explains how to extend the WebUI product (Object) searches with customer attributes. We want to know if there is also some note that explains how to display customer attributes in the search results for products/Objects.
Thanks in advance,
Sergey Kozyrev

Sergey,
I doubt whether there exists such note. The note 1026956 which you mentioned is for enhancing the Search for Custom attributes. For Enhancing the Result list you need to do custom development.
Regards,
Harshit

Hi. Does anyone know how to extend the airport express and extreme with Cisco Router DPC3925. I have upgrade my wireless to 50Mbps. Thank you

Hi,
Can someone help.
I have a Cisco router DPC3925 provided by the ISP and I cannot extend my wireless with Airport Express.
Also I intend to extend it with Airport Extreme.
Please help.
Thank you.

Sorry, but your post is not clear. The topic of this thread is how to extend an AirPort Express or AirPort Extreme with a Cisco router.
This would mean that the main router was an AirPort device and the Cisco would be extending the existing network provided by the AirPort.
Is that really what you want to do?
If not, then it sounds like your Cisco ISP provided wireless router is your "main" router and you will be using the Time Capsule to extend the network.
Please start another post to tell us exactly.......
What device will be the main router providing your Internet connection and wireless network
What device will extend the network
What operating system that you have on your Mac or PC

How to extend the outputlen of the ALV'S filter FIELD?

the users use the ALV's function button 'filter' to choose the data they need,but the default outputlength of the filter field is only 10 bytes,if they want to set the field for example 'MAKT-MAKTX' as the filter field,it will only display the 10 bytes in the front section,and then the grid will show nothing,how could i change the default outputlength of the filter field?
thanks in advance!

Hi Anold,
Good Check these links
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAGTFLV/CAGTFLV.pdf
http://help.sap.com/printdocu/core/print46b/en/data/en/pdf/bcdocgetting.pdf
http://kasi.murthy.tripod.com/ABAP_List_to_ALV.pdf
http://www.dolphin-corp.com/pdfs/whitepapers/PBS_R3-WhitePaper2005_EN.pdf
Good luck and thanks
AK

How to see all the PO payment status with searching field project defin.

Dear all experts,
could you help me on the following issue?
In a large capital project, there are many POs, and all the POs are paid partially
for example, down payment 30%, 30% when the machine is received, 30% when the machine is commissioned, 10% is for warranty after a year.
how can i see the all the POs payment status with searching field project definition. for example, i have paid how much for which PO. i want to see the list by searching the project definition.
is it possible to achieve? or how can i do it?
Please share your opinion or give me some suggestions.
thanks a lot.
Judy

thanks for all of your replies.
i have activated FM. and i have a PO triggered by the project.
i enter the down payment for the PO using F-48.
i can see the down payment in the PO history.
but i can not see it using the committment item report, such as CJIA
is it correct or not? do i need to change something?
thanks a lot.
Judy

How come its not letting me video chat with more than one people?

i've chatted before with more than 2 people on ichat but for some reason its not letting me. The plus sign will only show like 2 names meanwhile there are other people on my buddy list that i want to add not the ones in the plus sign. I've exited out of the chat i had with one person and went to the other person to make sure theres is working and it does. so why can;t i chat with 3 people then, and how to add them. If someone can help that would be great! Thanks!

Perthaps http://docs.info.apple.com/article.html?artnum=304486
and http://docs.info.apple.com/article.html?artnum=301050
play into this...
(if this solves your problem, or is actually helpful towards arriving at a solution to your problem, please consider clicking on either the gold or green star in order to mark this reply as "helpful" or "solved")

How do I share address book and calendars with other iCloud users?

I guess the title of the discussion question says it all.
My wife, and other family members want to SHARE Contacts, Calendars etc... with other iCloud users.
Simple task... most people would want to do it...
But... I can't find an easy answer... how do I do it?

Roger, thanks... I had continued my search and found this information on the discussion.
Now, my biggest concern is the ADDRESS BOOK... I'd like to publish, specific GROUPS within my master Address Book to other iCloud users... with either Read Only, or Read Write permisions.
Do you have any knowledge or suggestion on how that can be accomplished in iCloud?
It seems as though this would be FOUNDATIONAL in iCloud if APPLE expects it to be a USABLE SERVICE.
Thanks for your help...

How do I stop Address Book from opening with the same searched name?, How I stop Address Book from opening with the same searched name?

Every time I open Address Book (Lion) it opens to the same vcard with the same name in the search field. How do I keep this from happening? I have tried deleting the vcard, deleting the plist, and importing/exporting my contact. However, the search field contents are alwyas the same - even if I delete the field, close, and re-open. Thanks.

Hi Romulus949,
You should take a look at the Knowledge Base article [[How to set the home page]].
There are steps in that article to reset your homepage preferences to default. I would try that first to clear out any strangeness. Then you can set your homepage to anything you like.
Hopefully this helps!

How to synchronise IMAP address book in Thunderbird, with or without Kolab?

I am setting up an IMAP account on my website's email, to use as webmail and on 2 laptops. As far as I can see, IMAP promises much but crucially fails to deliver. It does a great job syncing the emails in the three locations, but it is worse than useless having 3 separate address books all out of sync.
The TB docs mention the SyncKolab add-on to sync the address books. But this is complex and frustrating. If it works at all, I can't puzzle out how.
What syncKolab seems to do is to set up a new folder of the server called "contacts" and to place a message-form record in that folder for each address in the laptop address book. What good does that do me ...? Does this solve the problem in some way I'm not seeing? What I need is that the actual address book on the server contains the addresses on the laptops, and vice versa. I don't get it, how the server fold which Kolab creates, helps me. The server address book is not updated.
I do not need calendar or task sync, just address book.
With or without SyncKolab; indeed, with or without Thunderbird! how do I sync the address book on my IMAP server with my laptops?
Many thanks
Andy

looking at the add-on, the idea is simple, use an imap folder for address book data, very similar to what Yahoo does with the Y!Messages folder to store their chat clients archived messages.
install the add-on in two different Thunderbird installations and it uses that folder to synchronize the address book.
These instructions look simple. http://www.gargan.org/en/Mozilla_Extensions/SyncKolab/Installation/
All that would be left would be to modify the account in Thunderbird not to show that folder so it is not a distraction.

How to trace MAC Address Of a Machine with PL/SQL

As MAC Address Of a Machine is Unique, for security, how to use trace the MAC Address of a machine on a WAN/LAN and record it in the database.Please note that it is important part of Audit Trail

MAC ADDRESS is unique, whereas IP Address is variable. Experienced user can very easily change (fake) MAC address.
Maybe you will be surprised it is trivial as changing of IP.
You may be able to build a component that is external to the database that can determine a MACOn linux (for example) you could use "arping" command or retrive MAC adressess from arp cache using "arp" command. arp cache stores MAC adresess of all computers which are or was connected to machine. These commands can run only privileged user (root) but you could give execute privilege for specific user (oracle) via "sudo". You can execute this commands using external procedure or call it from Java stored procedure.
It think tracking of IP will be enough beause IP must be unique on network (or in specific subnet).
So MAC tracking is waste of time (IMHO).

How to extend range of my wireless network with an Airport Express connected by ethernet with Airport Utility 6.0

Hi everyone,
I have AirPort Express 802.11n (1st Gen) firmware 7.6.1, that is connected to my main wifi base station (a TimeCapsule) by ethernet. I would like to extend the range of the Wifi Network but am not clear on how to do so using the new interface of Airport Utlity 6.0.
Does anyone have any tips on how to do this?
BR
AK

Hi Everyone!
Many thanks for the tips. I have downloaded 5.6 and have set my Airport Express in the "Extend a wireless network" mode. I was still having a few problems with the quality of the wifi connection in different parts of my apartment (by no means a very large one, but walls seem to be made of extra dense concrete here in Singapore) and went out and bought a few powerline adapters by TP Link (http://www.tp-link.sg/products/details/?categoryid=1862&model=TL-PA211#spec).
If you don't mind a slightly long post, I would be very grateful for any tips:
My setup is now as follows:
Main room
Time Capsule - connected to a Cisco DPC3925 Modem (http://www.cisco.com/web/consumer/support/modem_DPC3925.html) both connected to a TP Link adapter 1.
iMac - connected via Ethernet to TP Link adapter 2 and wifi enabled
Airport Express 1 - connected by Ethernet to TimeCapsule (and thus TP Link adapter 1) used to stream audio to a stereo that doesn't have an optical cable input. Since it is an Ethernet connection, I have wifi turned off.
Apple TV 1 - connected by Ethernet to TimeCapsule (and thus TP Link adapter 1)
Bedroom A
Airport Express 2 - connected via ethernet to TP Link adapter 3
Bedroom B -
Apple TV 2 - connected by Ethernet to a TP Link adapter 4
After following the tips on setting up the extended wifi network, I find that when I use a wireless client (e.g. iPad, Macbook air, etc) in either Bedroom B or Bedroom C (both don't have wifi in the room) the connection is very poor. Even more odd is that the connection in Bedroom A, one that does have Airport Express 2. To be clear when I mean very poor, I mean Skype/facetime skips frames and freezes... this doesn't happen when I am in the main living area.
I would be very grateful for tips on how to set up the most robust network given the configuration above. Specifically, I am wondering about:
When I select Extend a wireless network option on Airport Utility 5.6 the summary page states that it is connecting using "Wireless Network" vs what I would expect it to say "Ethernet connection".
Is there any advice on whether to enable 5Ghz network and if so, should I try to use that for the various wifi clients?
Does anyone know if I can somehow use Apple products to extend the reach of the Cisco DPC3925? Frustratingly the signal is quite strong (compared to Apple routers), but I cannot properly stream audio/video if that wifi network is used (as my iMac that hosts the content is on the Apple one... and I'd have to walk over to switch it to the Cisco one).
Any other tips would be much appreciated!
Cheers!
AK

How do I replace address book on iMac with iPad/iPhone contact info?

I've been using my iPad and iPhone to record contact information, and they sync with each other via iCloud. I realize now I should have recording this on the iMac and then syncing with the other devices.
But at this point, I'd like to replace all address book information on my iMac with the iPad/iPhone contact information. What's the best way to do this? I'm concerned that, while trying to sync either device with the iMac, I might somehow do the opposite - replace contact info on the device with address book info from the iMac.
I appreciate any suggestions.

Start by backing up the contacts on your Mac by opening Address Book (Contacts) and going to File>Export>Contacts Archive, save this on your desktop. Then download the app My Contacts Backup to your iPhone and use it to back up your contacts as a vCard attachment to an email. Send this email to yourself. (Note: if you have >500 contacts you'll need to either purchase and use the Pro version, or follow the instructions listed under "Contacts...iCloud.com Contacts" in this guide to dowload them from icloud.com: http://support.apple.com/kb/ht4910.)
I'm assuming at this point that you are NOT syncing contacts on your Mac with iCloud. If you are, do not perform the steps in this paragraph. Assuming you are not syncing your Mac contacts with iCloud, open Address Book (Contacts), go to View>Groups, then click on All Contacts. Click on a single contact, then go to Edit>Select All (Command-A) to select all contacts. Now press your delete key to delete them. Your Mac Address Book (Contacts) should now be empty. Now open the My Contacts Backup email on your Mac and double-click the attachment to import the contacts from your iPhone to your Mac Address Book (Contacts).

How to extend the jmf by a codec, with streaming ability

hi people, im sitting on a (in my eyes) realy hard challenge..
i have to build in a additional codec into the jmf and stream a file with this new built in codec ..
tryed to combine jmf with gsteamer fmj and many more but most of the time it simply dont work at all or if it works the solution lost its streaming ability.. so playing only..
any one around who could help me with this problem?
thanks in advance
sven
Edited by: InNeedOfHelp on Mar 4, 2009 5:49 AM

T.B.M wrote:
Sorry, I am just a 3rd year engg. student, not much experience ;-) ... you can get much more help in this regard from another experienced and knowledgeable poster *'captfoss'*, wait for him to reply. I'm glad you think of me as being experienced and knowledgeable, but I'm academiclly only about 2 years older than you ;-)
As for the codec...here's the 411 on all of that crap.
To develope a codec, you'll need to look at the following example:
[http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/FrameAccess.html]
That example is what's known as a "pass-through" codec...it doesn't modify the data, it just passes the input into the output without modification.
A normal codec would take data of a specific format and convert it into a new format (obviously). All of the work to do that should occur in the process function.
You can specify what input formats your codec is able to handle by modifying the "getSupportedInputFormats" function. You can specify what output formats your codec is able to handle by modifying the "getSupportedOutputFormats" function. I'd recommend that you set the input formats to just take in RGB, and the output formats to just be whatever your format is.
Once you have all of the code written to process from RGB to your new format, you can officially use your codec to transcode from RGB to YNF (your new format). You'll actually need to write 3 more codecs at this point...
(1) You need to write one to take YNF and return RGB. (decode it)
(2) You need to write one to take YNF and return YNF_RTP. This could probably just be a pass-through codec, but, I'm not 100% sure as I've never written an RTP codec personally...but it'll need to be something that a Processor would see as a content type of RAW_RTP...
(3) You need to write one to take YNG_RTP and return YNF.
Once you have all of those working, you'll then need to define a custom packetizer/depacketizer for your new RTP format.
[http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/CustomPayload.html]
This doesn't have to do anything more advanced than break the stream into chunks. The example code will probably work fine, with just the modifications necessary to make it work with your RTP format rather than the one the example uses (linear PCM wav files, as I recall)...
To summarize, you need to write the following peices of code to completely add a new format.
Encoding Codec, RTP-Encoding Codec, RTP-Decoding Codec, Decoding Codec, Packetizer, Depacketizer...
Edited by: captfoss on Mar 4, 2009 10:38 AM
Also, as a sidenote, the RTP Encoding and Decoding Codecs might not be necessary. I've never done this, I don't know anyone who has, so this is mostly educated guesswork...
Actually, if your packetizer says it'll take in the non-RTP version and packetize it, then you shouldn't actually
need the RTP codecs ;-)

How to create and handle sharepoint custom list with more than 300 columns?

Hi,
I have requirement for our project where in the input form is having around 320 columns in it.below are the columns and data types.
Single line of text-180
Yes or No Radio button -95
Date time control-35
Checkbox-10
I have checked the sharepoint boundry and limits for columns and data types.
https://technet.microsoft.com/en-us/library/cc262787.aspx
But how can we handle a sharepoint list with these many large number columns.
Is it safe to create all columns in a single list?
How it will impact the performance?
What is the other approach acheive this requirement?
Any help would be appreciated.
Regards,
Poovi

Hi,
According to your description, my understanding is that you want to know if it has some performance issue and limitation when create large number column in a list.
When creating columns in the list , you can still create all 320 columns in the list. But when retrieve the items in a view, then there is a list view threshold limit which causes the performance issue, see the link below:
Sharepoint list column limit
To handling the large number columns, I suggest you can distinguish the column with business logic to create in different list, it will be clear to display the logic relationship.
Thanks
Best Regards,
Jerry Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to extend an address of a BP with more fields ???? EEWB??

Similar Messages

Maybe you are looking for