How to extend clips after multicam editing.

I recently learned how to use multicam editing and I think it is such a fantastic tool. One of the things that I struggled with, however, is the ability to extend/shorten one of the clips because the footage was too shaky during the transition to another clip.
For example: Clip A is playing and recording on the timeline. But Clip A becomes shaky so I switch to Clip B. After everything is done, and I play it back, I see that shaky footage towards the end of Clip A.
How do I extend Clip B so that it extends over Clip A to get rid of the shaky footage?

The "Roll" tool. Click between 2 clips and roll the edit left or right.

Similar Messages

How do I perform a multicam edit in PPro CS6 using Plural Eyes?

So I'm new to multicam editing in CS6. I've recently upgraded from CS3 (yeah, it's been awhile). I'm editing a wedding on a Windows 7 machine with mostly DSLR's (start and stop clips). My workflow was going to be to sync through Plural Eyes and then all the clips would be synced on the timeline and I could create a multicam sequence from there. But apparently, you can't do that like you could in CS3. It seems that multicam was easier to do in CS3 almost. Has anyone been able to sync multiple DSLR clips on the timeline and use the multicam feature? I would love to be able to do this but not sure how to go about it or if it's even possible. Thanks for any of your help!

CS6 does add an additional method of creating a multicam sequence, but the old method there from the beginning still works just fine.

Can you apply fx to individual clips after a multicamera edit? CS6

I have footage from a 5 camera shoot of a concert. What I want to do is perform a multicamera edit to choose what angles I want to use. After the edit, I would need to go back and apply warp stabilizer to any sections that need it. One of the cameras has a telephoto zoom and another is on a dolly track; there are certain points where these angles need warp stabilizer, and other times where they do not need warp stabilizer. I do not want to have to apply warp stabilizer to 2 and a half hours of footage from two cameras when much of that footage does not need stabilized.
Is there a way to first perform the multicamera edit, then go back and apply fx such as warp stabilizer, color correction, etc, to individual clips that need it?

Thanks! I didn't want to go through the whole process and find out I had to do it all over again.
Off to give it a try.

Insert source clip after multi-cam editing, how?

hello
I created a sequence using multiple clips and did all my colour corrections. Then I created a new sequence by dragging on new items, sequence is now green. Enabled Mulit-cam editing and started the process.
After i finished, I noticed two clips have blown highlights. Looking at original source I accidentally add two levels. I tried deleting the blown highlight clips and replace them with the original, this did not work too well.
Is there a method I can insert clips after multi-cam editing?
I hope all this makes senses.

Here's how I did it a few times:
1. Add video tracks (and audio tracks if needed) to your timeline to equal the number of cameras you have. Of course if you have more than 4 this will start to get impractical.
2. Edit in your clips from your different camera angles, one to each video track.
3. Double click each clip in turn to get it into the viewer and click the Motion tab. Change its scale to 50%.
4. Select each clip in turn in the timeline and move it to one corner of the canvas. You need to have "image + wireframe" selected in the Canvas popup menu in order to move it with the mouse.
You should now have up to 4 different camera angles shown at the same time in the Canvas, each in its own quadrant.
5. Now the hard part is to align each clip according to time. Hopefully you have some sort of visual cue you can use to align the clips.
6. Then play through the timeline and use the razor tool to cut the clips where you want a camera angle change.
7. Select each camera angle piece you want from each cut you made and change its scale back to 100% and center it at 0,0. Delete the unused clips.
8. If you want, you can move all the clips that remain back to v1 so that you can use transitions between them.
What to do with all the various audio is another question. I usually use the audio from the best source all the way through, only changing to the other camera angle's audio when necessary.

How do I add a video clip after my music?

Its sort of a wierd question but basically to me imovie09 is a bust since i cant really see a real timeline to edit my project. But what im trying to do is after i edited my video and the song i have ends i want to add another clip after the song but without the song playing. Everytime i add a clip it either goes to the top of my project or just adds it to the song. basically what im tryign to ask is, how do i add a clip after a song?

Lurkai wrote:
ohh ok, so what i need to do is detach the audio and it will become that thin green strip at the bottom of the clips is what you are saying?
you don't like tutorials, don't you?
where does the audio come from?
if you ADD audio/music/voice over to a project, there are TWO options.
#1:
you drag it into the (grey) background of your Project - and it becomes a background track with its own 'behaviour': it will try to background the WHOLE Project as much as possible. as long there's audio left, any added video/still will lengthen the audio.
#2:
drag audio ONTO a clip .... it gets connected PLUS it offers the usual options any clip offers; copy/pasting, cutting, fading, effects. here, I added a fade and the last video-clip is audio-less.
safey?

Best Practices CS6 - Multicam Edit: How to use a key?

I'm trying to figure out what's the best way to use the Multi-cam editing function of CS6 PP, while applying a key to the primary video track.
The workflow I have is V1 contains the background that I want to key into V2. I applied UltraKey to V2, did the key (works great), and now I want to use the multicam editing to cut between the finished keyed V2 track, and video on V3. The way I've always used the Multicam editing in the past is to select the video clips from the clip browser (not the timeline) to create a multicam source sequence - but if I have to apply a key first, I can't do that. I thought of nesting V1 and V2 together after the key is applied, but then I can't make adjustments to the key after the final composite is made (or can I?)
Any thoughts about what works best in this scenario? appreciate the help.

I don't think my system could support live keying. I'd prefer to apply the key first but this is where I had a problem. Let's assume for a minute that there's no key. In a typical MCS workflow, I'd just select the clips from the browser, create the MCS, do the live cuts and be done with it. If I can still do that it's fine, but would that screw everything up in the MCS if I move all the video up one track because the background for the key has to be in front of the video that it's being applied to? I hope I'm making sense here.

Imovie song does not start at the beginning after I edited the duration of the clip

my imovie song does not start at the begining after I edited the duration of my clips. The audio clip now starts in the middle of the song. This is occuring with the second song in my video. How do I adjust the audio to start at the beginning of the song.

For pop ups. From your Safari menu bar click Safari > Preferences then select the Security tab.
Select: Block pop-up windows
safari starts always with top page even I have apple.com as a starting window
Back to Safari > Preferences. This time select the General tab. You can reset your homepage from there.
history its not saving or at least not showing when i press the thingy that looks like a little book on the tools bar
That icon represents your Bookmarks not history.
To view history, from your Safari menu bar click History > Show History
Or Option + Command + 2 on your keyboard.

How should i export already h.264 compressed video/audio files after i edit them?

I am recording gameplay footage off computer with a program that compresses the video and audio. After I edit the footage how should i export it? I don't want to lose quality by double compressing it.

Michael Holmes1 wrote:
I have to record all the color changes I make in one Project, so I can repeat them in the other 17 projects, etc.
No.
You need to explore Compound Clips. This workflow may or may not be of help.
Select an Event with clips in it and press Option+G to make a (blank) compound clip.
Select the Event Browser, create a new Event and call it 'Effects'.
Drag the Compound Clip into this Event.
Right-click the clip and select 'Open in Timeline'.
Select the timeline and press Option+W. This will add a Gap Clip to the timeline.
Select the gap clip and press Ctrl+D then type in the duration you want the clip to be.
Now open a project and select and copy one of the clips with effects etc.
Open the Compound Clip in the Timeline again, select the gap clip and press Option+Cmd+V to paste the effects into your Compound Clip.
This clip is now saved in your Browser and will remain there for you to copy and then paste the effects into any clip in any project.
It's a bit clunky, but it works - and once you learn about Compound Clips, you can work wonders with them. As an example, if you want to add more effects without overwriting the effects in the Compound Clip, simply make the Compound Clip into a Compound Clip (again) and add the effects. They will be added to the original effects.
Andy.

How to do I add Adobe Photoshop CS6 Extended Student and Teacher Edition Bundle to my basket?

Hi there,
I was just wondering how i could add Adobe® Photoshop® CS6 Extended Student and Teacher Edition Bundle to my basket as it wont let me once i have selected the bundle option.
Many thanks
Tom

This is an Apple forum, those are Adobe products. You need to be in touch with Adobe!

How many computers does Adobe Photoshop CS6 extended Students and Teacher Edition be licensed on?

I have Adobe Photoshop CS6 extended Students and Teacher Edition, but i wanted to know how many computers it can be licensed on?

You can do licensed install on two systems same platform(Win or Mac). This depends for which platform you bought the SN for.
Hope this answers your query.
Regards,
Ashutosh

How do I stop my original photo from changing after I edit then save it in Raw 7

How do I stop my original image from changing after I save the edited version in Camera Raw 7. I want to be able to keep the original intact and
also have the edited version. Also, if I want to work the new edited version in the future I would want to also keep that old version.
Thanks for your help

Thanks for this great solution NoelHave a great day and weekend
Re: How do I stop my original photo from changing after I edit then save it in Raw 7created by Noel Carboni in Photoshop General Discussion - View the full discussion Another way to revert all the saved metadata changes back to defaults is to select the Camera Raw Defaults entry in the Camera Raw fly-out menu... http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6070597-543394/362-482/RevertS ettings.png -Noel

How do I do multicam editing in final cut pro 10.2?

I updated to FCP 10.2 and when I right click on my videos that I want to use for multicam editing it shows nothing

I think you're selecting clips in the timeline… not in the browser, which is where you need to work when you create multi clips. .
Russ

Does Editing a clip after using the "Open in Timeline" command in the event browser alter the source media file?

Does editing a clip after using the "Open in Timeline" command in the event browser alter the source media file?

C5ELEN wrote:
. Didn't we have that in 7? Seems like I remember we could set the number of undo levels.
Legacy FCP has Revert Project to return to the last saved version, and it has Restore Project to go back to one of the autosaved versions. The maximum number of undo's can be set in user preferences. A lot different than X.
Russ

How to setup multicam editing in fcpx, how to setup multicam editing in fcpx

Does anyone know how to setup multicam editing in final cut pro x

ask the Mothership
http://help.apple.com/finalcutpro/mac/10.0.3/#ver23c76439

Re-installed photoshop elements 12. In folder correct copies, how to change read-only to edit photos? After printing photo how to return to grid view?

Reinstalled photoshop elements 12. How to change photo after printing back to grid view? In folder correct copies one or more files is read only. How to change so these can be edited?

Reinstalled photoshop elements 12. How to change photo after printing back to grid view? In folder correct copies one or more files is read only. How to change so these can be edited?

How to extend clips after multicam editing.

Similar Messages

Maybe you are looking for