How to extend Nokia n8 Alarm?

I was wondering how I can extend the time on my alarms on Belle. I currently use songs off my phone but the alarm only lasts about a minute or so and more than half the time I always end up sleeping past the alarm. Why doesn't Nokia let us have the option to set how long the alarms play for?

Hi Doggi,
When an alarm sounds, you can snooze the alarm. This pauses the alarm for a defined length of time.
When the alarm sounds, select Snooze.
Set the length of the snooze time
On the home screen, select the clock.
Select Options > Settings > Alarm snooze time , and set the length of time.
Tip:
You can snooze alarms also by turning your device display down.
Activate turning control for snoozing
Select Menu > Settings and Phone > Sensor settings > Silence alarms > On .
Also, please note that the alarm will snooze up to around 8 times, you can set another alarm for longer snooze periods to ensure you don't miss it. You can set the snooze to ring at slightly longer intervals.
Example: Instead of just 2 minutes. And set a second alarm to go off in the middle of the first snoozed alarm. And perhaps a slightly more annoying alarm tone.
Let us know how you get on with this.
Regards,
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Similar Messages

Nokia 5800XM - Alarm snooze - how to cancel snooze...

Hello all,
Im solving little bit annoying alarm feature in my phone. Imagine that you have alarm set as DAILY at 6 in the morning. In the morning I snooze the alarm after first ringing by sliding the bar snooze. In alarm settings, there is a comment that alarm is "delayed to 6:10" (because of my 10minute setting).
The question is, how to remove this snoozed alarm without waiting to 6:10 ? If you choose deactivate alarm, then you have absolutely deactivated your daily alarm, after activating back it is still snoozed to 6:10. The only option is
a) wait until it starts ringing and choose STOP
b) delete snoozed alarm and set the new alarm with 6:00 and daily repeating
Does anyone know how to solve this problem??? How to quickly say to alarm: Cancel snoozing mode and turn back into normal settings ?
thank you for any ideas and suggestions

Hello frutisek
Hello frutisek
Your question is very valid and I can understand the issue. Even I'm facing the same issue with the latest phone of Nokia C7. The requirement is very simple and obvious.
Most of the people on this thread haven''t understood the problem correctly.
Even a simple alarm clocks and basic phones do have such a feature. The lack of facility to come out of snooze loop anytime shows the stupidity of the application engineers of Nokia/Symbian.
Hello frutisek
Your question is very valid and I can understand the issue. Even I'm facing the same issue with the latest phone of Nokia C7. The requirement is very simple and obvious.
Most of the people on this thread haven''t understood the problem correctly.
Even a simple alarm clocks and basic phones do have such a feature. The lack of facility to come out of snooze loop anytime shows the stupidity of the application engineers of Nokia/Symbian.
I wonder whether there is any fix or work arounds available for this yet.
If there is please let me know.

How to extend or buy the Nokia Music subscription ...

How to get extend nokia music subscription or how to buy unlimited nokia music on my asha 311
Moderator's Note: We have moved your post and changed the title into a subject-related title. This is to keep the forum organized and let other forum users easily see and respond to this post.

Where are you from? In your music app, don't you see the various payment methods to extend your subscription?

Nokia 2310 Alarm not ringing

Hi Im having trouble with my Nokia 2310 Alarm clock
Basically, it doesnt ring. When the alarm goes off the screen lights up and flashes but theres no vibration or ring.
When i recieve calls the phone vibrates and rings
I dont know whats wrong with my phone, ive played around with all the settings and cant seem to fix it. If anyone knows how to fix this please let me know
Thanks!

Hi Friend!
Its a problem occured in savings at temporary memory.
You turn off Alarm option in the mobile and switch off the mobile, remove battery and leave the mobile without battery for 5 min. After 5 min, turn on your mobile and enable your Alarm option with your preferred ring tone or standard alarm tone and wake up early
Thank You.
Shyam.

Extend calendar notification alarm time

When setting notifications for calendar entries, the notification alarm only rings for 5 seconds before silencing. Any idea how to extend the time the alarm rings?

Duplicate: http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Extend-calendar-notification...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How To Extend Adobe Audition CS5.5

I've received a number of questions on how to extend Adobe Audition with questions similar to:
How do I import file format X?
How do I import a project from application Y?
Will there be an SDK available?
How do I add plug-ins to Audition?
I had made a post similar to this in the public beta of Audition for Mac, but I can no longer find the thread. So I'll reiterate some stuff here:
Area
Info
Adding VST Plug-Ins
Most of you have found this already, but the best place to start is in the Audio Plug-In Manager
If you want to "write" new plug-ins for Audition, writing a VST plug-in will be the best option as it will allow you to write something that will work on Windows as well as OSX. Info on writing a VST plug-in may be found here (http://www.steinberg.net/en/company/developer.html)
Adding Audio Unit Plug-Ins (Mac OSX)
Same as Above.   Note that OSX ships with some built-in AU plug-ins that Audition can utilize for free if you just scan at least once.   We don't scan on startup because there's several plug-ins out there in the world that don't behave well. Info on Audio Unit plug-in development can be found here (http://developer.apple.com/library/mac/#documentation/MusicAudio/Conceptual/AudioUnitProgr ammingGuide/TheAudioUnit/TheAudioUnit.html)
Adding more import formats via libsndfile
libsndfile is an open-source C library for reading and writing audio files (http://www.mega-nerd.com/libsndfile/)   Ambitious people could download the source, write support for another format, and create their own custom-rolled library of libsndfile. You would then replace the version of libsndfile with which Audition CS5.5 ships, with the one you rolled.   Due to the way we use libsndfile, any format you add would show up in Audition.   This is also true if there's an official update to libsndfile that comes out in the future, you could just plop it in and it should work.
If you're interested in exporting or writing formats that libnsdfile supports, please tell us which formats are the most important to you and in what way you use them in your workflow.
Adding more import formats via QuickTime components
QuickTime has the ability to be extended via QuickTime Components.   There's several examples out there, but here are some websites to check out:
QuickTime Components (http://www.apple.com/quicktime/resources/components.html)
Learn about even more QuickTime capabilities (http://www.apple.com/quicktime/extending/components.html)
Flip4Mac for Windows Media support on OSX (http://www.telestream.net/flip4mac-wmv/overview.htm)
Perian -- the swiss-army knife for QuickTime (http://perian.org/)
Calibrated Software (http://www.calibratedsoftware.com/products.asp)
In most cases, just adding the various QuickTime components will automatically add the import functionality to Audition.
Importing project formats from other applications
As seen on other threads in this forum, Ses2sesx (http://www.aatranslator.com.au/ses2sesx.html) and AATranslator (http://www.aatranslator.com.au/) seem to add quite a bit of support.
SDK
At this time, we haven't released an SDK for Audition.   If you're interested in one, however, please tell us what you would want from an SDK for Audition and we'll take it into consideration.
Message was edited by: Charles VW
Added links to AU and VST development info

Charles,
could you please also advise what PC users can do to make common avi files useable in AA CS5.5? The obvious problem is, no matter how many exotic video formats a PC can play by way of video-for-windows codecs, these are useless for Quicktime, because Quicktime on the PC needs codecs specifically written for "Quicktime for Windows", which are, as I've come to find, EXTREMELY rare. So far I've only found ONE, sold by 3ivx, but this costs as much as the AA CS5.5 update itself. Without them, Quicktime on the PC will only handle mov files, which are not too popular on the PC. Is there any other way out of this?

How can I remove default alarm for events in iCal on devices ios?

Whenever I add an event to my iCal calendar in Mounain Lion it will automatically add one default alert only on my iphone and ipad. These default alarms are not displayed on my macbook or icloud.com
Default alarms are disabled in macbook, icloud.com, and my ios devices.
How can I remove default alarm for events in iCal on devices ios?
Thanks and sorry for my english.
MacBook Pro, Mac OS X 10.8

OK, so I have had this issue for the past several months. I think it all started when I upgraded to ML from SL and migrated my calendars and contacts to iCloud. That was a couple months ago. But now I am running 10.8.2, and about two weeks ago I upgraded my iOS devices to 6.0.1.
I don't seem to be having any issues with events that I create now, but all those old events that were migrated to iCloud a couple months ago, many of those sound alerts on the iOS devices even though there was no alert defined when the event was originally created. I have always had alerts off by default both in iCal and on the iOS devices.
So here's the question: is there a way to go through and disable all these spurious event alerts? I've been disabling them as the event reminders come up, but it's irritating. It would be nice if there was a way to turn them off all in one shot somehow.

How do I add an alarm to a calendar appointment?

I'm tearing my hair out trying to understand the Calendar app in OS X Mavericks.
When I create an appointment in iOS, I can easily add an alarm, or set it to repeat (weekly, monthly etc.).
In the OS X version, I cannot do this. I double-click on the appointment and I get a kind of preview version, that only lets me add Invitees, or "Notes Attachments, URLs".
How do I add an alarm to this event? It's in an iCloud calendar.

I don't get that view... I get this
nowhere in that view does it mention repeats or alerts.

Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
could you tell me how best to set airport express up to extend my wifi range?

Greetings,
This is called an "Extended wireless network".
Read this article for details and steps on how to extend your TimeCapsule's network:
http://support.apple.com/kb/HT4259
Cheers.

How to extend an address of a BP with more fields ???? EEWB??

Hi Gurus,
I need to extend the address of a BP with some customer fields. I have tried to do it using EEWB but when you have to choose a Business Object for the new extension, the reasonable only possibility is to choose BUPA Object. Thus, the DB table BUT000 is extended with a custom include that contains the customer fields, but what I want to do is extending ADRC DB table. There is some way that I do not know of achieve this in which the system creates automatically all the FM for the BDT events????
If it is not possible, which would be the procedure to do that with my own development???
Thanks in Advance.
Regards,
Rosa

Rosa, you can only extend table BUP000 and not the actual address table. Sorry for that for more details on how to extend the BP itself refer to my WeBLOG I wrote on this. Have fun and let me know whether you need more help, Tiest.
Also do not forget to award points to useful responses.
<a href="/people/tiest.vangool/blog/2005/07/24/pc-ui-and-easy-enhancement-workbench-eew-integration and Easy Enhancement Workbench (EEW) Integration</a>

How to u set your alarm clock but not have the phone or txt go off

Hi, My old phone Blackberry had an alarm. I would set it and then shut the phone off. The phone would turn itself on when the alarm had to go off.
IPone 4 will not do that. So, how do I set the alarm and not have the phone ring or get text alerts. I cannot figure out how to do this.
How do you delete pictures that are not on the camera roll there is a garbage can for those but not for other picture. I have double from synching too many times, this is my first Apple and I am not finding it easy to use.
Thank you

lumpy53 wrote:
If you turn on the mute switch on it will still vibrate when you get a call or text.
You can select whether or not it will vibrate when the mute switch is engaged. Settings>Sounds>Silent. Turn Vibrate on or off.

In an inbuild example of can .. that CAN transmit periodic vi .. i am unable to understand how the extended and standard frame is set?

In an inbuild example of can .. that CAN transmit periodic vi .. i am unable to understand how the extended and standard frame is set?
plz help me .. stuck up very badly
thanks
mahadev
Solved!
Go to Solution.

I suggest this KB which explains usage of Ext IDs with NI-CAN
http://digital.ni.com/public.nsf/allkb/2FA120A37EDBC51D86256854004FB0C7

How can import nokia n97 contacts in iPhone 4

How can import nokia n97 contacts in iPhone 4 which is stored in window vista

depend on how it's stored
when you connect your iphone to your computer and open your itunes on the computer
and click on the iphone under devices and get the iphone content menu you can
click on the info tab on the content menu
there you can choose how you will be syncronizing contacts to your iphone
if what you mean by "is stored in windows vista" is avaible in the dropdownbox then choose
that otherwise you need to export the contacts from the "stored by windows vista" to an options
present in the dropdownbox
the most easy thing would be using an export to pst and import from pst in microsoft outlook as it is pretty compabile with many things

Outlook 2013 - How to extend/add new meeting in recurrent meeting inside SharePoint site ?

I have created a recurrence meeting but now it is exired, how to extend ? Please advise

Hi,
Please check the link below
https://support.office.com/en-us/article/Create-link-to-or-update-Meeting-Workspaces-98834566-4750-45e9-bb71-fe4acb26f170?ui=en-US&rs=en-US&ad=US#BM2
https://social.technet.microsoft.com/Forums/sharepoint/en-US/01054bef-1cb0-4401-88c9-e4593ab4b806/how-to-extend-date-in-recurring-meeting-workspace-in-sharepoint-site?forum=sharepointgenerallegacy
Please remember to click 'Mark as Answer' on the answer if it helps you

How to extend the range with a second Airport Express? Do I need a DSL cable?

How to extend the range with a second Airport Express? Do I need a DSL cable?

Thanks, now we need a bit more information, please, in order to provide you with the correct information that you need.
I assume that you already have one AirPort Express.....either a model A1264 or A1392.....set up and operating OK, is that correct?
If yes, you can extend the network either by using wireless or an Ethernet cable with a second AirPort Express.....either the A1264 or A1392 model. A wired connection is the way to go, if possible, since it provides better performance. But, wireless might work OK for you if you want to try that.
Let us know "how" you want to extend......wireless or wired?

How to extend Nokia n8 Alarm?

Similar Messages

Maybe you are looking for