How to extend ringer time

I'm pretty sure the iPhone, like all phones, is set at a default ring time of 20 seconds. Is there any way on my own that I can manually extend the ring time to the maximum 30 seconds or do I have to call Apple customer service. If so what is the number I can call?

Here is what i know about the ringer time.
First type *#61#{SEND}. Your iPhone will show where your voicemail calls are being to sent to. Write down the number as for you will need later. Second type {STAR} {STAR} 61 {STAR}{the number you just wrote down}**30#{SEND}. When you get the confirmation dismiss it. Finally, check that your calls are still being forwarded to the correct number. Type *#61#{SEND} and verify its the same number as before.
There you have it, your now 30 second ringer.
Where you see {STAR} it means *, i couldnt get it to show it correctly.

Similar Messages

How to extend ringing time before voicemail is activated?

I would like to setup the phone such that voicemail is not activated for 10 or 15 seconds, but I can't figure out how to do it. This was pretty easy to do on some previous phones I used.
Any ideas how to do this?
Thank you for your time.

I contacted SingTel (Singapore Telecom) and they gave me a code that I had to "call" from the phone. Seems to work OK.
The bottom line is that you can't do it onboard the phone. As you guys said, you have to find out from the wireless provider.
Thanks.

How do I extend ring time on calls?

How do I extend ring time on calls?

Are you asking about how long before it goes to voicemail? If that is the question, then you need to contact your carrier. They are the ones that control that. It is not done at the phone level, that is carrier level settings. It is not based on rings, it is based on time. They may be able to extend it for you.

How to extend the time line for the premiere on mac pro mavericks

how to extend the time line for the premiere on mac pro mavericks

Wrong place.
Try the Adobe Premiere forum.
http://forums.adobe.com/community/premiere
Good luck,
x

N97 extend ring time

I have an N97 (unbranded) on O2. The ringing time seems to be set for 15 seconds, although I cannot find any way of changing this.
By the time I've managed to get my phone out of my pocket, and figure out how the unlock thing actually works and answer the call, the 15 seconds is up! I've not managed to answer a single call since I've got my N97!
Any clues on extending the ringing time?

Go to Menu>Settings>Call>Call divert>Voice calls>All voice calls>Activate>To voice mailbox, then you should be able to select a ringing time up to 30 seconds.
However, this setting is not in the phone itself, it sends a code to the network call servers which may in rare cases override your setting; but this normally works.

Extend ring times

How do you extend the ring time on a Nokia 6120

I don't know your model, but on some phones you can change the setting in the Call Divert menu, but only if the operator supports it.
Chris
6230i (the last bug-free Nokia?)
Vodafone UK contract since 1992

Lumia 610 - How to extend ring and Nokia Suite iss...

Hi there thought I would give you try again as you were very helpful to me in the past I have just taken delivery of nokia lumia 610, I know not the latest phone but for what I want I reckon it will suit however I have encountered 2 problems First is there any way you can extend the length of time it rings before it goes to voicemail it only rings 3 times on my phone Secondly nokia suite just does not seem to recognize my phone I follow all the instructions but it just will not connect    I have tried uninstall/reinstall but nothing works I right click on the phone symbol to add new phone, connect my USB as it says and nothing happens. I am not all that tech savy so if you have answer in layman's terms it would be appreciated
Thanks   Eddie

this is the worst nokia i have had, except the slide phone i had for 13 months that lost its speaker. i cant believe that the ring time cant be extended, this would be the only product on the world market that cant extend it ring time. i dont see your technical help answering the question.
regards peter.
weedougie wrote:
Hi there thought I would give you try again as you were very helpful to me in the past I have just taken delivery of nokia lumia 610, I know not the latest phone but for what I want I reckon it will suit however I have encountered 2 problems First is there any way you can extend the length of time it rings before it goes to voicemail it only rings 3 times on my phone Secondly nokia suite just does not seem to recognize my phone I follow all the instructions but it just will not connect    I have tried uninstall/reinstall but nothing works I right click on the phone symbol to add new phone, connect my USB as it says and nothing happens. I am not all that tech savy so if you have answer in layman's terms it would be appreciated
Thanks   Eddie

How to extend standby time Nokia3110c

I know from local forum that Nokia3110c standby time is up to 5 days (reality), while my Nokia get only 2 days. Can someone share idea how to setup phone to extend standby time? ie. wallpaper, screen saver, sleep mode, display submenu, call submenu, phone submenu or otherelse.

1. Turn off the features you do not use.
2. Turn off animated wallpapers & screensavers.
3. Activate sleep mode and power-saving mode on the menu.
Consult your manual for other features you can turn-off if not in use. =)

How to increase ringing time before voicemail

Can anyone tell me how to increase the number of times my x6 phone rings before voicemail cuts in please? At the moment it will only ring three times, approximately 15 seconds, before going to voicemail.
Thanks

mary5898 wrote:
Can anyone tell me how to increase the number of times my x6 phone rings before voicemail cuts in please? At the moment it will only ring three times, approximately 15 seconds, before going to voicemail.
Thanks
Check out this old post from 2006...
/t5/Hardware-Codes-and-Operator/Number-of-Rings-on-Incoming-Calls/m-p/5002/highlight/true#M307
If you are on Orange or Vodafone then follow the codes, if you're on another network then phone up the network provider for the relevant code as mentioned above.
steve_p wrote:
... If you are on Orange then try the following:
Please bear in mind that the following code is only valid for phones on the Orange UK network.
The code to set the length of time your phone rings is:
**61*07973100123*11*??#
Where ?? is the time in seconds, e.g. to set the ring time to 30 seconds you would type the following code at the standby screen then press the green send button:
**61*07973100123*11*30#
To make your phone ring for only 10 seconds:
**61*07973100123*11*10#
The code works in 5 second intervals, i.e. you can set 5, 10, 15, 20, 25 & 30 seconds.
If you're on a network other than Orange then I'm afraid I can't help but you should be able to get some answers from your network provider.
AND
viw9419 wrote:
If however you are on vodafone then you would need to type *#104# to give you your mailbox number and then
**61* (YOUR MAIL BOX No).*11*(AMOUNT OF SECONDS) # SND
Hope that helps.
S.
History: Motorola MR30, Nokia: 7110, 7650, N70, N80, N82, X6 (32GB), Samsung Galaxy SII
Current: Samsung Galaxy Note3 Black

C2 -01 how to increase ringing time before going t...

hi - can anyone please advsie how to increase the ringing time - before call goes to message bank- thanks

Though for S60, have a look at this thread ..Should be the same way it needs to be set..

How to Increase ring time before fowarding to voicemail

Please can someone let me know where the setting are to Increase ring time before fowarding to voicemail.
I've looked high and low and not able to find it.
Thanks

I don't know if it different in the states but I used this and it worked for me.
http://iphoneguru.org/change-the-amount-of-rings-before-visual-voicemail-answers

Screen Goes a Little Grey After a Few Minutes - How to Extend The Time?

I think it must be some kind of screen saver, but the screen goes a little "grey" after a few minutes of idle keyboard time, like when watching something on
youtube.
what setting is this and how can I extend or turn off this screen saver option?
thx -Craig

Hello,
The display dims to save wiggly amps at half time before sleep occurs.
Display Dimming (link).
You can adjust the settings in Apple menu > System Preferences... > Energy Saver pane.
mrtotes

Did the whole *61*1(VOICEMAIL NUMBER)*11*30# to get extended ring time and

Now when my phone goes to voicemail it is a busy signal instead of my voicemail. Anyone have any thoughts on how to correct this issue?
Below are the steps I fllowed...
It is NOT necessary to call CS to do this and the max time is NOT 15 seconds.
First Dial *#61# to see your voice mail number (this is the number that the phone fowards the call to when there is no answer) write it down including area code
Then dial 611(VOICEMAIL NUMBER)1130# then dial or send. There should be no spaces and make sure you enter the number correctly (ie) 61*13235552323*1130# then you should see a comfirmation.
This works only on at&t and T-mobile. The number 30 is time length you can set it shorter if you want but 30 is recommended max.

Back from travelling.
Not much to add: I would say that it is very good after a few costs, agree with etresoft
The trackpad issue may be gone after you replace the possibly bloating battery. Replace it.
When you replace it do a good vacuum of the insides, especially around the back hinge,
and IMHO you can ditch SMC Fan Control: mac can take good care of itself without that.
Also I would remove Growl: Notifications is much better in the latest OSXs.
What does the PinItButton extension for you in Safari?
In MacintoshHD->Library->InternetPlug-ins delete the AdobePDFViewer plugin
and what does the Scorch plugin do for you?
In MacintoshHD->Library->LaunchDaemons delete the ...adobe.switchboard... file.
The Olympus software may not really function I guess, you should see if it has a Yosemite compatible update.
The same for ValveSteam software.
I would take out the Amazon music app also.
Restart.
Lex

How to extend the time of jar certificate

i have created the the keystore using keytool
then signed the jar using jarsigner
but its giving my jar is certified for six months only.
my question is how can i extend the certificate period???

Since you don't say how you generated the key and certificate that you placed in the keystore I shall assume that you generated the key and self-signed certificate using 'keytool'(1). When you looked at the documentation for 'keytool' did the option not jump out at you?
(1) The only thing that hints that this is not the case is that the default validity period for 'keytool' is documented as 90 days and not 6 months.

How to extend transaction time on EJBSessionBean method?

Hi,
I am importing some data from XML files, and for that I have several methods in a SessionBean. The import may take several minutes, so with larger sets of data I get "Transaction time out" error. I know I can set transactions to bean-managed (haven't tried it yet, though), but is there a way to set a single method's transaction (in a container-managed-transaction bean) to take all the time it needs?
Thanks,
Pedja

Ok now it is even worse ir seems to have stopped ringing totally my phone is updated using the latest version of IOS and the ringer is on full I am missing all of my calls!!!! Is there anyone that can help??

How to extend ringer time

Similar Messages

Maybe you are looking for