How to extend ringing time before voicemail is activated?

I would like to setup the phone such that voicemail is not activated for 10 or 15 seconds, but I can't figure out how to do it. This was pretty easy to do on some previous phones I used.
Any ideas how to do this?
Thank you for your time.

I contacted SingTel (Singapore Telecom) and they gave me a code that I had to "call" from the phone. Seems to work OK.
The bottom line is that you can't do it onboard the phone. As you guys said, you have to find out from the wireless provider.
Thanks.

Similar Messages

  • How to increase ringing time before voicemail

    Can anyone tell me how to increase the number of times my x6 phone rings before voicemail cuts in please? At the moment it will only ring three times, approximately 15 seconds, before going to voicemail. 
    Thanks

    mary5898 wrote:
    Can anyone tell me how to increase the number of times my x6 phone rings before voicemail cuts in please? At the moment it will only ring three times, approximately 15 seconds, before going to voicemail. 
    Thanks
    Check out this old post from 2006...
    /t5/Hardware-Codes-and-Operator/Number-of-Rings-on-Incoming-Calls/m-p/5002/highlight/true#M307
    If you are on Orange or Vodafone then follow the codes, if you're on another network then phone up the network provider for the relevant code as mentioned above.
    steve_p wrote:
    ... If you are on Orange then try the following:
    Please bear in mind that the following code is only valid for phones on the Orange UK network.
    The code to set the length of time your phone rings is:
    **61*07973100123*11*??#
    Where ?? is the time in seconds, e.g. to set the ring time to 30 seconds you would type the following code at the standby screen then press the green send button:
    **61*07973100123*11*30#
    To make your phone ring for only 10 seconds:
    **61*07973100123*11*10#
    The code works in 5 second intervals, i.e. you can set 5, 10, 15, 20, 25 & 30 seconds.
    If you're on a network other than Orange then I'm afraid I can't help but you should be able to get some answers from your network provider.
    AND
    viw9419 wrote:
    If however you are on vodafone then you would need to type *#104# to give you your mailbox number and then
    **61* (YOUR MAIL BOX No).*11*(AMOUNT OF SECONDS) # SND
    Hope that helps.
    S.
    History: Motorola MR30, Nokia: 7110, 7650, N70, N80, N82, X6 (32GB), Samsung Galaxy SII
    Current: Samsung Galaxy Note3 Black

  • How to Increase ring time before fowarding to voicemail

    Please can someone let me know where the setting are to Increase ring time before fowarding to voicemail.
    I've looked high and low and not able to find it.
    Thanks

    I don't know if it different in the states but I used this and it worked for me.
    http://iphoneguru.org/change-the-amount-of-rings-before-visual-voicemail-answers

  • C2 -01 how to increase ringing time before going t...

    hi - can anyone please advsie how to increase the ringing time - before call goes to message bank- thanks 

    Though for S60, have a look at this thread ..Should be the same way it needs to be set..

  • Extend the time before voicemail picks up

    How can I set the number of rings on my phone before voicemail picks up?  The default of 20 seconds is too short.  I would like to extend the time to 30 seconds.  How can I do this?

    It's set by the system at roughly 30 seconds; sometimes using a different ringtone helps.

  • How to extend ringer time

    I'm pretty sure the iPhone, like all phones, is set at a default ring time of 20 seconds. Is there any way on my own that I can manually extend the ring time to the maximum 30 seconds or do I have to call Apple customer service. If so what is the number I can call?

    Here is what i know about the ringer time.
    First type *#61#{SEND}. Your iPhone will show where your voicemail calls are being to sent to. Write down the number as for you will need later. Second type {STAR} {STAR} 61 {STAR}{the number you just wrote down}**30#{SEND}. When you get the confirmation dismiss it. Finally, check that your calls are still being forwarded to the correct number. Type *#61#{SEND} and verify its the same number as before.
    There you have it, your now 30 second ringer.
    Where you see {STAR} it means *, i couldnt get it to show it correctly.

  • Extend/reduce time to voicemail pickup

    I thing I notice that os 10 haven't been able to do, that is, control the number of incoming phone rings prior to out going greetings. My old blackberry 9630, I had control over that.
    MOD EDIT: Subject changed to reflect a new topic

    customize1 wrote:
    I thing I notice that os 10 haven't been able to do, that is, control the number of incoming phone rings prior to out going greetings. My old blackberry 9630, I had control over that.
    This (time to voicemail) is not a BlackBerry feature but is controlled by your mobile provider.
    And not a feature request (I'll ask a moderator to move this post).
    As a norm, most all carriers have a default 15 seconds of ringtime until the voicemail picks up. That can be extended to 30 seconds.
    If you do need additional ring time before voicemail, The simplest method is to call your carrier and request a longer ring time, up to 30 seconds.
    There is another method:
    Dial *#61# from your phone. ...
    You should see a new screen that displays a bunch of information about what's getting forwarded. ...
    Now, dial **61*+11234567890*11*XX# and hit Send, where 11234567890 is the number that you found in step two and XX is the number of seconds you want to wait until voicemail picks up.

  • How do I extend ring time on calls?

    How do I extend ring time on calls?

    Are you asking about how long before it goes to voicemail? If that is the question, then you need to contact your carrier. They are the ones that control that. It is not done at the phone level, that is carrier level settings. It is not based on rings, it is based on time. They may be able to extend it for you.

  • How do you change ring time before giong to viocemail?

    How do you change ring time before phone goes to voicemail?

    You can configure many call-handling features on the iPhone, but not the number of times an incoming call rings before it goes to voicemail. Only your carrier can change that variable. Wireless service providers uniformly grant incoming calls four rings within roughly 20 seconds before sending them to voicemail. If you find that ring length too short or too long, contact your carrier to adjust it.

  • Iphone 4s on Orange in UK. How do I increase ring time before answer service kicks in?

    iphone 4s on Orange in UK. How do i increase ring time before orange answer service kicks in?

    Tried that. They told me to
    **61*
    Check answer phone number
    then *11*20##call key
    Made no difference

  • How to extend the time line for the premiere on mac pro mavericks

    how to extend the time line for the premiere on mac pro mavericks

    Wrong place.
    Try the Adobe Premiere forum.
    http://forums.adobe.com/community/premiere
    Good luck,
    x

  • How do I extend the ring time before answering the phone

    I want to extend the ring time on my iPhone as it currently only rings for 5 seconds and then goes to message.

    The following works on my iPhone, enter the code...
    **61*901*11*NN# Send
    Where NN is the number of seconds, in increments of 5, to a maximum of 30 seconds.

  • How do I extend the time before re-entering password.  I have it set of one hour at present but would like to extend that.

    I have a 2014 Mac Mini 1.4G, 4GB, 500GB.  I bought this recently but am new to Mac.  How can I extend the down time before having to re-enter my password. I have it set to 1 hr but I need more time because of using it intermittently throughout the day.  I can't seem to get back to where I set that in the first place.
    Help!!
    Ozarksguy

    You can go to System Preferences > Security & Privacy and make your choices:

  • Lumia 610 - How to extend ring and Nokia Suite iss...

    Hi there thought I would give you try again as you were very helpful to me in the past I have just taken delivery of nokia lumia 610, I know not the latest phone but for what I want I reckon it will suit however I have encountered 2 problems  First is there any way you can extend the length of time it rings before it goes to voicemail it only rings 3 times on my phone Secondly  nokia suite just does not seem to recognize my phone I follow all the instructions but it just will not connect    I have tried uninstall/reinstall but nothing works  I right click on the phone  symbol to add new phone, connect my USB as it says and nothing happens. I am not all that tech savy so if you have answer in layman's terms it would be appreciated
    Thanks   Eddie

    this is the worst nokia i have had, except the slide phone i had for 13 months that lost its speaker. i cant believe that the ring time cant be extended, this would be the only product on the world market that cant extend it ring time. i dont see your technical help answering the question.
    regards peter.
    weedougie wrote:
    Hi there thought I would give you try again as you were very helpful to me in the past I have just taken delivery of nokia lumia 610, I know not the latest phone but for what I want I reckon it will suit however I have encountered 2 problems  First is there any way you can extend the length of time it rings before it goes to voicemail it only rings 3 times on my phone Secondly  nokia suite just does not seem to recognize my phone I follow all the instructions but it just will not connect    I have tried uninstall/reinstall but nothing works  I right click on the phone  symbol to add new phone, connect my USB as it says and nothing happens. I am not all that tech savy so if you have answer in layman's terms it would be appreciated
    Thanks   Eddie

  • Screen Goes a Little Grey After a Few Minutes - How to Extend The Time?

    I think it must be some kind of screen saver, but the screen goes a little "grey" after a few minutes of idle keyboard time, like when watching something on
    youtube.
    what setting is this and how can I extend or turn off this screen saver option?
    thx -Craig

    Hello, 
    The display dims to save wiggly amps at half time before sleep occurs.
    Display Dimming (link).
    You can adjust the settings in Apple menu > System Preferences... > Energy Saver pane.
    mrtotes

Maybe you are looking for

  • Error while installing new com+ component SAP CRM Mobile Transfer 5.0

    Hello experts, I've upgraded crm/msa from 50sp6 to sp11. In SP11 there msa/mas use dot.net framework 2.0 . For this I have to upgrade the commstation with note 1065337, but after deleting the com+ component DOTNET.TransSrv I cannot reinstall the new

  • One warehouse number, two number ranges?

    Hi all, I have a scenario where an external system creates some of the transfer orders in a warehouse, while others are created through normal WM processes. I would like to be able to give the external system a specific number range to use, separate

  • I have set my preferences to not allow storage yet i constantly have to remove it..why?

    i have set my global and website storage to not allow any storage at all yet over and over I am constantly having to remove storage from a few websites and no I am not allowing them to do it in any way that I know of...can this be fixed somehow?

  • Mail shows message count even if deleted.

    Mail shows 970 unread emails (in two accounts), however all have been read and deleted from phone. When showing empty, the MAIL APP icon still shows 970 messages. Where are they ? Thanks for your help. J

  • In Chat after invite video "Connecting"....but never does

    I just bought the ISight and want to chat with AIM users - so they can see/hear me even if they don't have a camera themselves. However, no one can see or here me when chatting in aim...my camera is "on" and i can see me in the "preview"....Even afte