How to extend secure network and guest network.

Sorry if this has been covered but I couldn't find it.
I have an Airport Extreme running the 7.6.3 firmware. Once Comcast gets their act together it will be running off a static IP. I want to wirelessly extend my guest WiFi and my secure WiFi. What do I need to get this done? Do I need to get an Express for each network? Or can another Extreme repeat both networks? Eventually I hope we will have Cat5 running to the repeater's location but that could be a long way off.
Thanks!

I cannot get the web page to open when I do a search on the SMC8014, but it appears that this is a modem/router or gateway type of device.....which will not allow the Guest Network feature to be enabled on the AirPort Extreme.
I did find this, which confirms that the SMC is a modem/router or gateway....not what you want.
http://www.speedguide.net/routers/smc-smc8014-biz-business-cable-gateway--534
The solution is to find out from SMC or your Internet Service Provider whether or not the 8014 can be configured to operate in "Bridge Mode".....which would then allow you to configure the AirPort Extreme to operate as the main router on the network. This would allow the Guest Network option on the AirPort Extreme to be enabled correctly.
Or better yet.....ask your ISP for a simple modem.......not a modem/router or gateway type of device.
So assuming this is all compatable (or I get compatable equipment), I can extend both networks with 1 express or 1 extreme?
That is correct.

Similar Messages

Extend both main and guest networks with a 2nd Time Capsule?

I have a 4th generation 2TB Time Capsule set up to broadcast primary and guest networks. I am running out of storage. I would like to increase my storage and I would also like to extend both primary and guest networks.
I currently use an older Linksys router (WRT330N) operating in bridge mode (wired connection to the TC) to extend the primary network, but it does not extend the guest network.
If I purchase a second (5th generation) Time Capsule to replace the Linksys, can it be set up to extend both the primary and guest networks?
From searching the forum, it appears not, but I'd like to confirm. Is true for both both wireless and cabled range extension options?
If I'm not able to extend the guest network this way, I'm inclined to settle for extending the primary network as I currently do and look for other ways to increase my network storage capacity (e.g. by upgrading the drive in my existing TC).

If I purchase a second (5th generation) Time Capsule to replace the Linksys, can it be set up to extend both the primary and guest networks?
Yes, either using wireless or an Ethernet connection between the two Time Capsules, providing that the 4th Gen Time Capsule is running at least firmware version 7.6.3.
A wired Ethernet connection between the two Time Capsules is highly recommended. If you plan to extend using wireless, the second Time Capsule will need to be located where it can receive a very good signal from the first.

Can Airport Express extend the private and guest networks simultaneously?

Can the Airport Express be used to extend the private and guest WiFi networks coming from the base station simultaneously, or can it only be an extension for one of the two at a given time?
Joe

Can the Airport Express be used to extend the private and guest WiFi networks coming from the base station simultaneously
Yes, either by a wireless connection or Ethernet connection to the base station.....assuming that both the base station and extender are using firmware 7.6.3 or higher and AirPort Utility 6.3 is used to configure both AirPorts, which must be dual band models.

EA6350: primary network problems, guest network ok

Been scratching my head with this one. I have 2 AC1200's, aka EA6350's running 2.4ghZ mode for now.
In a nutshell the following has been done:
Primary 192.168.1.1
Secondary (bridged)
Primary office network and guest network is set up. Bridge mode turns off guest access, of course, on the second router.
The guest network functions just fine, no drops, nothing...the primary network however experiences constant speed reductions, drops and when attempting to do a speed test cannot ping the test host. It recovers and then slows back down again.
I've tried disabling the second router, moved them farther apart, had them on different channels: 1 and 11, etc...I'm at a loss as to what to do but the biggest issue is I can't customize my configuration much with these routers. I really want to extend this network seamlessly, and have done so in the past with other routers but I suspect two AC1200's on the same network are just not happy. Problem is I can't keep spending $$ on routers to test my theories.
As our primary network is the secure one I can't combine anything, the guest network must stay isolated from our internal network.
Any suggestions?
Thanks
(side note) I have done full factory resets a couple of times on each one and checked the firmware rev, both are up to date.

Hi Odd-Ball. I believe you can have your non working Linksys router returned for replacement. Who knows the new one may not give you the same problem anymore.

Extending Time Capsule primary and guest networks with 2nd Time Capsule

Hi
I have two Time Capsules. The first is configured to run a primary and guest network. It is connected to an ADSL modem. All of this works fine.
The second Time Capsule is cable connected to the first, in a 2nd location (a next door building).
I want the 2nd Time Capsule to extend _both_ primary and secondary networks in its location.
How do I configure the 2nd Time Capsule (and the first if there is anything I have to do there to get this to work).
Please! and thanks...
Graham

Sorry, but the Guest network cannot be extended either through wireless or Ethernet.
If you would like to see this feature in a future product, you might want to let Apple know
Apple - Time Capsule - Feedback

How do I set up a guest network on my Time Capsule?

how do I set up a guest network on my Time Capsule?

If that is the case, then......
Open Macintosh HD > Applications > Utiltiies > AirPort Utility
Click Manual Setup
Locate the Guest Network tab located just below the row of icons and click on it
(If you do not see a Guest Network tab....you likely do not have the Time Capsule connected to a simple modem)
Enter a check mark next to "Enable Guest Network"
Type in a name for the Guest Network
Enter the password and confirm
Click Update to save your settings and Time Capsule will restart in 25-30 seconds

Timed Access controlling Main and Guest Network

I have a Time Capusle 4G running software v7.5.2. I am running a Guest Network as well as a closed network.
In the Timed Access window i have default set to "no access". Then, all the computers that are allowed access to the main network are on the list. My guest network is broadcasting but when a user tries to connect to it, they get an "Unable to connect" message. If I change the default access in Timed Access to "Everyday", users are then able to connect to the Guest network again.
Obviously, this is a bug/missing feature and has been for several software revisions. I don't want people accessing the main network that aren't on the timed access list. However, I still want guest users to access the Guest Network, without using MAC address filtering on the Guest Network.
It looks to me that the Timed Access window is controlling the restriction of the Guest and Main network. Which renders the Guest Network feature pretty much useless.
Hopefully this will be addressed in the near future. If other people are experiencing this problem, Please let me know.
-Ghost

It looks to me that the Timed Access window is controlling the restriction of the Guest and Main network.
Your observation is correct. Access control using Timed Access is an ALL or NOTHING feature for both the Main and Guest networks. The Guest network is basically a VLAN function.

When i try to order prints i get an error message saying there is a problem with my network and my network is working

when i try to order prints i get an error message saying there is a problem with my network and my network is working. How can i solve this problem?

Try a different media. I have good luck using Maxell discs.

Can no longer connect to my network and 'forget network' option has disappeared??

Can no longer connect to my network and "forget network" option has disappeared??? (Ipod touch 5th generation). This happened on both my children's ipods. We have reset network settings but it doesn't help.

JEM24 , your suggestion is included in:
- iOS: Troubleshooting Wi-Fi networks and connections
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
JEM24 wrote:
Sorry Mindi, also have your tried rebooting your router? That's all. Try that before you attempt to Restore. Cheers.

How to Extend an AM and in what case you will extend the AM

Hi OAF Gurus,
Please explain How to Extend an AM and in what case you will extend the AM.
Thanks in advance
Kumar

Hi,
please go throughwith below link provied by anil...
http://oracleanil.blogspot.com/2010/11/am-extension-in-oaf.html
Regrads
Meher Irk

HT201303 How to reset Security question and awsers?

Hi
How to reset Security question and awsers?

If you have a rescue email address (which is not the same thing as an alternate email address) on your account then the steps on this page will give you a reset link on your account : http://support.apple.com/kb/HT6170
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps on this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5620
Or, if it's available in your country, you could change to 2-step verification : http://support.apple.com/kb/HT5570

What is the differnce between t-mobile network and EE network?

what is the differnce between t-mobile network and EE network?

Difference as far as speeds?
Difference in Prices?
What do you want to do in the UK with your iPhone?
Personally, I have enjoyed using 3 UK and Vodafone while I was in Heathrow.

HT201359 How to reset security questions and answers

How to reset security questions and answers?

Click here for information. If the option to have the answers emailed to you isn't available or doesn't work(the email may take a few hours to arrive), contact the iTunes Store staff via the link in that article.
(88571)

Is it possible to extend AP Extreme's both main and guest networks by connecting one or two new dual band AP express in roaming mode (connecting with ethernet)?

I have an Airport extreme base station which creates a wireless network and a guest network at my home. Neither of them reach every room so I have set up one Airport express (1st generation A1264) in roaming mode to extend the main wireless network by connecting the base stations with ethernet (with powerline adapters actually). Works fine with the main network. However, I would like to extend also the guest network. Is this possible with a 2nd generation dual band AP express?

I would like to extend also the guest network. Is this possible with a 2nd generation dual band AP express?
Yes it is, if you have updated your Mac to use AirPort Utility 6.2 and both the AirPort Extreme and AirPort Express have been updated to use version 7.6.3 firmware.

Airport Extreme 802.11AC + 5th Gen and guest network access

I have the current gen Airport Extreme 802.11AC with a 5th Gen extending the network. With this setup, I am unable to login using our guest network setup. I have tried using guest network with a password and one without but its the same results. When a guest logins, it stuck attempting to login with no error messages.
So is it possible to have this configuration and still have guest network access?

Please review what I said originally.......that the guest network function on the AirPort Extreme is designed to work with a simple modem......so the AirPort acts as the main router for the network..
Another way of saying the same thing is that the AirPort needs to be "in charge" of your network for the guest feature to work correctly. The AirPort cannot be in charge if it is connected to another device that is already configured to be the main router on your network.....your Actiontec modem/router.
The Actiontec device combines the functions of a separate modem and a separate router in one package. This type of device is known as a modem/router, or also known as a gateway.
Some folks call a modem/router or a gateway......a modem. So, things can get confusing.
I do not know if it is possible for the Actiontec device that you have to be configured to act as a simple modem.....so the routing functions of the device are completely turned off. (Turning off the wireless on the Actiotec does not turn off the routing function).
If you turn off the wireless on the Actionec, it becomes a modem and a wired router. And that wired router is still in charge of your network.
The guest network feature will not work correctly unless the AirPort is in charge of your network.
My suggestion was for you to ask your Internet Service Provider (ISP), if they could supply you with a simple modem. That is all that you need. You don't need two routers....and the Actiontec that you have now is not allowing the guest feature to work correctly.

How to extend secure network and guest network.

Similar Messages

Maybe you are looking for