How to extend the costing view for a material

How to extend the costing view for a material

Use MM01 Trxn code and Select Material and Select Costing Views and Maintain, Save it.
Else Use MM50 and Select Material and Mainenance Status as G Costing and Execute, Maintain & Save.

Similar Messages

  • "I would like to know how to set the default view for the columns. Somewhere I read it could be done in by music icon under Library.  Can't find it.  Thanks

    "I would like to know how to set the default view for the columns that are shown in iTunes. Every time I open it, I have to either go to the options, or right-click to get the pop-up options, and delete "rating" and add "composer." I'd really like to just do it once and be done with it."  Somewhere I read you could do this by clicking on the Music icon under LIBRARY then arramge the columns.  Trouble is, I can't find a Musi Folder or icon in my user library.
    Any help would be appreiated.  OSX 10.9.2  iTunes version 11.1.5  Thanks!!! CW!

    From the iTunes menu bar try View>Show View Options.  Make sure what you want to see is checked and what you don't is unchecked.  You can do this (may need to do this) for any playlists, your main Library, etc.
    Good luck
    srb

  • How to extend the time line for the premiere on mac pro mavericks

    how to extend the time line for the premiere on mac pro mavericks

    Wrong place.
    Try the Adobe Premiere forum.
    http://forums.adobe.com/community/premiere
    Good luck,
    x

  • How to get the cost center for the retro balance.

    Hi All
    I have this report that gives the retro balance. I get the information from RT and BAL. The problem is it doesn't show the Cost Center for the retro amounts. C1 holds the current periods payments not the retro ones.
    Does any one know how can i get the Cost Center of the the amounts that wage type /552 is showing in the RT?
    Please Help!!!

    Hi
    I am not sure on the requirement. You are developing a FI report and accessing VA03 which is sales transaction. Anyway for getting cost center you can go to table VBAK,VBAP for line items.
    Hope solves ur problem
    Thiru

  • How to assign the same GTIN for different material?

    Hi,
    I've managed to install an internal number assignment for the GTIN / EAN in material master which works fine.
    Now we need to assign the same GTIN to different material numbers. 
    Since the defined number range is marked as internal I cannot use this number range as the external number range in spro -> Define Attributes of EANs/UPCs (number categories/EAN categories):
    I cannot make an external number range with the same data as the internal one, since number ranges must not overlap.
    So, here is the question again:
    How can I achieve that 1. the GTIN is generated and 2. a GTIN, which is already assigned to another material, can be entered manually in the GTIN field?
    Any advice is appreciated,
    thanks,
    Marco.

    1. the GTIN is generated
    This should be "external" number range only.
    2. a GTIN, which is already assigned to another material, can be entered manually in the GTIN field?
    We can enter manually or thru' upload during master data creation provided number range is "external"(refer point no.1 above)
    Unable to understand that why you need same GTIN in two different articles?
    Request to understand the business process once again as this leads to confusion reg. inventory, PDC and PoS dumping.

  • How to do the Partial delivery for configurable material ?

    Hi All,
    I am creating a sales order  for a configurable material and is trying to do the partial delivery for the same. But, after the outbound delivery the status of the sales order is shown as completed although I have done the partial delivery.
    Here are the steps I followed.
    1. material I used here is a configurable material.
        Main settings.
      a. In Basic Data tab, marked as configurable
      b. Procurement type='E' in MRP 2 tab
      c. Strategy group as 82 in MRP 3 view.
    2. I created a sales order for quantity 10
    3. Created a production order followed by goods Movement thereby increasing the stock.
    4. Did the outbound delivery for  quantity 5.
    Now if I checked for the status of the sales order using VA02, the status for the line item as well as for the sales order was "Completed" although I had done partial delivery.
    I have checked for setting in Customer master record, item category in VOV7. Everything seems to be fine.
    I checked for all the information in the FORUM without any help.
    Can you please help me?
    Kind Regards,
    Anupama

    Hi,
    For Info, I am creating a sales order for Item category TAC.
    1. In my case, after completing the partial delivery, in the document flow for Order, the status is shown as completed.
    2. In status overview for this item, delivery status indicator is set as  'Fully delivered'.
    I did check in the customer master record and the field
    Partial delivery per item  is set to Blank(  Partial delivery allowed)                
    3. I did run the report RIBELF20  and I am getting this error for all the sales order I created for partial delivery for configurable material.
    For Normal item, the status is showing properly.
    Is there any other settings I have to check?
    I needed this to be working. Please help

  • IDOC : How to send the basic view of a Material

    Hi experts,
    I'm using BD10 to send Material data with ALE/IDOC.
    I want to send Material Master Data (MATMAS), Modifications (ECMMAS) and the BOM (BOMMAT).
    How can I send only the basic view of the Material Master Data ? By using another message type ?
    Regards,
    David

    Solution : new Message Type (By reducing MATMAS)

  • How to find the number views for a particular DB Table

    Hi Friends,
       I would like to know the number of views(all) exists for a particular Data Base Table like MARA, MARC etc.,
    Thanks in advance.
    BaLu

    Hi Balaji,
    check this below link may be helpful for u
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ecab446011d189700000e8322d00/content.htm
    If u find it useful plz mark the points
    Regards,
    Naveen

  • MM50 Extend Mtrl costing view, but after maintaining costing view in OMS2.

    Hello Sap Gurus,
    I have a Unique Issue, i have created few 1000s Materials with material type ZDEN, now initially while creating these materials the costing View was not selected in the Material Type,
    but after creating this 1000s of material under ZDEN material type, now we require Costing View to be maintained for this material which are already created,
    so as an option we went to the material type ZDEN in OMS2 and extended the costing Views for the material type,
    now if i go to MM50 to extend material costing views I'm not able to extend the costing view for the materials, it gives me an error no materials selected,
    but alternately if i try extending the costing  views individually for each material by MM01 transaction it allows me to extend costing views to the material selected,
    is there any bug or issue note to be applied or any solution for this mass extension of views in material master, any bapi to extend Materials of this scenario,
    Awaiting your reply,
    Thanks and regards
    S Kumar

    when you create a material master after initial customizing of OMS2 then SAP writes the possible views into table MOFF
    If you then do customizing in OMS2 and add the costing view, this is not updated for  all your exsting materials 
    Hence you dont get them via MM50 because it selects the materials based on entries in MOFF,  but you can extend with MM01 as SAP checks the current customizing.
    execute transaction OMSM which can rebuilt the table and see if you then get your materials in MM50

  • How to extend the BP List

    Hi Friends,
    Please let me know how to extend the List view 100 to more in transaction BP.
    Regards
    Ricky

    hi frnd....
    u can use this code once
       CALL FUNCTION 'BAPI_BUPA_ROLE_ADD_2'
      EXPORTING
        businesspartner                   = customer_data-partner
      BUSINESSPARTNERROLECATEGORY       =
      ALL_BUSINESSPARTNERROLES          = ' '
       businesspartnerrole                = <wg_part_grp05-partnrole>
      DIFFERENTIATIONTYPEVALUE          =
      VALIDFROMDATE                     =
      VALIDUNTILDATE                    = '99991231'
    TABLES
       return                            = tbl_return.
               CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
              EXPORTING
                wait   = c_wait
              IMPORTING
                return = tbl_return.
    I have tried.....its working for both standard roles and also for custome roles

  • How to display the 'language code' for language dependent 'Short text' ?

    Hi,
    I am new to BW.
    Can somebody help me with the following issue?
    I have an attribute 'Material category description'  and I chose short text exists and made it language dependent. I had loaded the master data successfully.
    Now I want to know how to check the 'language code' for this material category description. When I display the data, will the language code display by defalult?
    I had checked the text table using SE11
    It displays the following fields over there.
    /BIC/TS1_MCT_DS   [  /BIC/TS1(InfoObject name)  ]
    LANGU
    TXTSH
    I appreciate your help!
    Thank you
    Sekhar

    Dinesh,
    I went to RSD1 -> info-object -> Master Data/text tab. It shows my language selections there (Short text selected, language time dependent etc.) with everything grayed out.
    In SE16, I could display the data in the following format.
    /BIC/ST_PRID                TXTSH                 TXTMD
    P01                                   umbrella                 rainyday
    P02                                  tent                         waterproof
    etc.
    I want to see the 'language code' as one of the columns in this table.
    Can you help me do that?
    Thank you,
    Sekhar

  • My iphone 4s fell from the bed and the front screen glass got cracked but the touch screen is working fine, so can i replace just that screen glass?? If not what am i to do ? And how much it might cost me for that repairing??

    My iphone 4s fell from the bed and the front screen glass got cracked but the touch screen is working fine, so can i replace just that screen glass?? If not what am i to do ? And how much it might cost me for that repairing??

    I don't know. You'll have to ask.
    FYI, if the phone was not originally sold in India, it can not be serviced in India. You will have to take it back to the country where it originated.

  • I purchased an additional audio function for the apps ＂baby monitor＂today, but this function didn't work on my ipad. Grateful if you would let me know how to refund the cost.

    I purchased an additional audio function for the apps ＂baby monitor＂today， but this function didn't work on my ipad. Grateful if you would let me know how to refund the cost.

    Refund
    http://www.apple.com/emea/support/itunes/contact.html

  • How much is the cost for replacing iphone 4 display?

    how much is the cost for replacing iphone 4 display?

    Apple will replace it, and the replacement comes with a 90-day warranty.
    There are some legitimate, high quality repair centers that often can fix phones for less than replacement cost and offer at least 90 warranty...
    Or maybe the OP knows that the broken display is not covered under warranty, which is why he was asking for the cost, but he still may have a warranty that just wouldn't cover him in this case.
    The warranty is all or none.  If the phone were damaged so as to void warranty coverage on the display, there is no remaining warranty on the rest of the device.

  • How to display the field name in the tabulated view for a content query web part

    I have added a content query web part changed the web part file to include custom columns imported and reffered itemstyle.xsl
    to include the tabulated view for the content query.
    However the way it is displayed is such that only the content is displayed.
    As i am using a tabular view wto display the data, i want to display their field names as well.

    Hi  ,
    According to your description, my understanding is that you need to display the field in the tabulated view for a content query web part.
    For your issue, please refer to the code as below:
    <xsl:template name="VendorCustomStyle" match="Row[@Style='VendorCustomStyle']" mode="itemstyle">
    <html>
    <table width="100%">
    <xsl:if test="count(preceding-sibling::*)=0">
    <tr>
    <td width="8%" valign="top"><div class="item"><b>Vendor ID</b></div></td>
    <td width="12%" valign="top"><div class="item"><b>Vendor Name</b></div></td>
    <td width="50%" valign="top"><div class="item"><b>Vendor Description</b></div></td>
    <td width="10%" valign="top"><div class="item"><b>Vendor Country</b></div></td>
    <td width="10%" valign="top"><div class="item"><b>Vendor Date</b></div></td>
    <td width="10%" valign="top"><div class="item"><b>Created By</b></div></td>
    </tr>
    </xsl:if>
    <tr>
    <td width="8%" valign="top"><div class="item"><xsl:value-of select="@VendorID" /></div></td>
    <td width="12%" valign="top"><div class="item"><xsl:value-of select="@Title" /></div></td>
    <td width="50%" valign="top"><div class="item"><xsl:value-of select="@Vendor_x005F_x0020_Description" disable-output-escaping="yes" /></div></td>
    <td width="10%" valign="top"><div class="item"><xsl:value-of select="@Vendor_x005F_x0020_Country" /></div></td>
    <td width="10%" valign="top"><div class="item"><xsl:value-of select="@Vendor_x005F_x0020_Date" /></div></td>
    <td width="10%" valign="top"><div class="item"><xsl:value-of select="@Author" /></div></td>
    </tr>
    </table>
    </html>
    </xsl:template>
    For more information, please have a look at the blog:
    http://www.codeproject.com/Articles/756834/Customizing-the-Content-Query-Web-Part-and-Item-St
    http://msdn.microsoft.com/en-us/library/ms497457.aspx
    http://clarksteveb.hubpages.com/hub/Customized-Content-Query-Web-Part-CQWP-in-SharePoint-2007-with-results-Tabbed-Grouped-and-in-an-HTML-Table
    http://blog.sharepointexperience.com/customitemstyle/
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

Maybe you are looking for