How to extend the extractor 0FC_BP_ITEMS?
Hi everybody,
Has anyone any information about extend the extractor 0FC_BP_ITEMS? Does it run with a tipical user exit?
Thanks and regards!
MML
Hi,
The fields in the extract structure are filled with data from DFKKKO, DFKKOP and DFKKOPW.
refer this link- https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d00ea035-ab1a-2b10-b4be-e7514fd80872&overridelayout=true
it will solve your purpose.
Similar Messages
-
Extend the extractors 2lis_13_vditm - 2lis_13_vdkon
Hi Masters.
I have to extend the extractors 2lis_13_vditm - 2lis_13_vdkon with 2 fields Z (ABAP code), but now these extractors on the production system keeps loads deltas daily, my intention is not to lose the original initialization and the upload delta.
anyone knows how to do?
Best regards.
R.A.Hi Rodrigo:
Please refer to the documentation below.
"Customizing Cockpit: Managing delta queues when structure changes", blog by J Francisco Fernandes.
/people/jfrancisco.fernandes/blog/2010/05/21/customizing-cockpit-managing-delta-queues-when-structure-changes
"LO Extraction u2013 Part 7 Enhancing LO Data Source", paper by P Renjith Kumar
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09d5356-d8c4-2d10-8b84-d24723fc1f0a?quicklink=index&overridelayout=true
Regards,
Francisco Milán. -
hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
could you tell me how best to set airport express up to extend my wifi range?Greetings,
This is called an "Extended wireless network".
Read this article for details and steps on how to extend your TimeCapsule's network:
http://support.apple.com/kb/HT4259
Cheers. -
How to extend the range with a second Airport Express? Do I need a DSL cable?
How to extend the range with a second Airport Express? Do I need a DSL cable?
Thanks, now we need a bit more information, please, in order to provide you with the correct information that you need.
I assume that you already have one AirPort Express.....either a model A1264 or A1392.....set up and operating OK, is that correct?
If yes, you can extend the network either by using wireless or an Ethernet cable with a second AirPort Express.....either the A1264 or A1392 model. A wired connection is the way to go, if possible, since it provides better performance. But, wireless might work OK for you if you want to try that.
Let us know "how" you want to extend......wireless or wired? -
Hi! Anyone know how to extend the intro of the music I want to use in a video in imovie?
Hi! Anyone know how to extend the intro of the music I want to use in a video in imovie?
Hi trineram,
Welcome to the Support Communities!
The article below may be able to help you understand the parameters for adding music to an iMovie for iOS project.
iMovie for iOS (iPad): Add background music
http://support.apple.com/kb/PH3192
Cheers,
- Judy -
How to extend the time line for the premiere on mac pro mavericks
how to extend the time line for the premiere on mac pro mavericks
Wrong place.
Try the Adobe Premiere forum.
http://forums.adobe.com/community/premiere
Good luck,
x -
How to extend the costing view for a material
How to extend the costing view for a material
Use MM01 Trxn code and Select Material and Select Costing Views and Maintain, Save it.
Else Use MM50 and Select Material and Mainenance Status as G Costing and Execute, Maintain & Save. -
How to extend the size of a layer?
Hi all,
Hopefully this is an easy one, but I think I'm just thinking about it wrong. I'm animating the movement of one part of a photo. I duped the photo layer, masked out the subject I want on the copy layer and have animated its position over time. Pretty straight forward. The problem is that as the item moves its edges are seen. I wanted to just use the clone stamp to add a little more to the image but obviously you can't paint or stamp past the edge of the layer. So I was trying to figure out how to 'extend' the bounds of the layer a little so that I can fill in the missing area.
Thanks for any input.
-ChrisHi Todd,
Thanks for the reply. Unfortunately, I'm not having any success with this method. Here's what I have:
Original photo of kids with ball at playground. Ball is at lower left but partially cut off. Photo is on layer 1.
I duplicate layer 1.
Rename layer 2 to 'ball' and layer 1 to 'bg'
On ball layer I mask out the ball and then animate its position over the length of the clip.
When I precompose the ball layer (I tried both moving the attributes and leaving them as is) I get the new composition 'ball comp 1'. I open up ball comp 1 and change the composition settings to make the width taller.
So far, so good. Now I'm trying to follow your suggestion to then paint on the precomposition layer. Do you mean to go back to the original composition where the new pre-comp layer is and try to paint on it? If so, that doesn't work. If I select the Clone tool and try to paint the layer actually gets moved rather than painted on. If I open the new 'ball comp 1' composition and try to paint there it doesn't work either. And if I open up the layer in that comp that has the ball in it and try to paint there, the edges are still the original edges.
Any idea where I went wrong?
THanks,
Chris -
How to extend the range of my Airport Extreme network by adding an Airport Express
How to extend the range of my Airport Extreme network by adding an Airport Express?
You have to make sure that the AirPort Express is in Factory Default Settings. If it is straight out of the box, it is ready to be configured.
The instructions that I will provide are for using AirPort Utility 6.0, which you have.
Locate the Express in the same room as the AirPort Extreme for the configuration. Power it up and allow a full minute for the Express to display a blinking amber light.
Make sure that the wireless is turned on your Mac
Open AirPort Utility 6.0 and look at the small rectangle in the upper left hand corner of the display. It should now read something like "Other AirPort Base Stations (1)"
Click on the rectangle, and then click on the AirPort Express xxxxxx listing
AirPort Utility will take a minute or two to analyze the settings on your network and then suggest that the Express be configured to "Extend" your wireless network.
Edit the Base Station name to your liking, then click Next in the lower right hand corner
Allow a full minute or two let AirPort Utility do its work
When you see Setup Complete, click Done at the lower right of the window.
Now move the AirPort Express to a location that is approximately half way between the AirPort Extreme and the area that needs more wireless coverage.
You should be in business. -
How to Extend the count of item code in IC_ITEM_MST table
Hi Friends.
Recently we used 10 count of IC_ITEM_MST table . But we want to extend the count 15. How to define pls help me.
Regards
Babu.JDuplicate post -- How to Extend the count of item code in IC_ITEM_MST table
-
Hi gurus how to extend the idoc
hi gurus how to extend the idoc
HI vasu,
in order to extend an IDOC goto WE30 tcode.
1) Give you basic IDOC type at the object name
2) select the Extension radio button
3) click on create button
4) it asks for 3 types of extension . so give the basic IDOC type over there
5) give description and click on continue button.
6) so at which segment level you want to add your segment, select that particular segment and click on create segment button and place your already created segment.
7) save and go back.
this the procedure of extending an IDOC.
Reward points if useful....
thanks,
satheesh. -
How to extend the number of rings before phone goes to answering machine?
On 5S, How to extend the number of rings before the message machine turns on?
Check with your carrier. It is not an iPhone controllable setting.
-
How to extend the WebUI product search results with customer attributes
Hello,
We are using CRM 7.0. We want to extend the WebUI product (Object) searches with customer attributes and to display customer attributes in the search results. We found the note 1026956 that explains how to extend the WebUI product (Object) searches with customer attributes. We want to know if there is also some note that explains how to display customer attributes in the search results for products/Objects.
Thanks in advance,
Sergey KozyrevSergey,
I doubt whether there exists such note. The note 1026956 which you mentioned is for enhancing the Search for Custom attributes. For Enhancing the Result list you need to do custom development.
Regards,
Harshit -
How to extend the validity of a validation set to the past?
By t.code GS01 I've created a a set for Valitation rules (OB28).
Then, I've verified that the set isn't valid for the past.
How to extend the validity of the set to the past?
Thanks
GandalfHi,
I think we can not maintain validity dates for Validation.
Just go to T. Code OB28 set your Co Code, Call Point and set activation Level as 1 to activate your validation.
Regards,
JA -
How to extend the IDoc ORDERS05 and populate values?
Hi,
My requirement is to add few fields to the standard IDoc ORDERS05 and populate values to the newly added fields.
Please let me know how to extend the standard IDoc ORDERS05.
Regards,
Balaji. RHi balaji,
you can try to google for SAP R/3 IDoc Cookbook for EDI and Interfaces by Axel Angeli et.al.
Although Axel refers primarily to MATMAS Idoc the technique of extending IDOCs is explained very well.
Also very good is the search function here on SCN, I just found
[Some Experience on IDoc Enhancement|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3414900%29ID0711317150DB10743789739220747754End?blog=/pub/wlg/8285]
Blogs and Wikis here are the best source for general questions like yours, usually of much more value than forum answers
Regards,
Clemens
Maybe you are looking for
-
How can I display a JPG Date Taken stamp on images?
I have several digital JPG images taken that I would like to pull EXIF data from to display a timestamp on the photo. I know many old cameras used to do this natively, but my iPhone does not imprint the date and time on the images. I want to pull t
-
I really need help with this question. Can someone please shed some light on this subject.
-
Class.forName how can I invoke a unknown method
I have a code like this: public class Detonator { String cName; String mName; public Detonator(String className, String methodName) { cName = className; mName = methodName; // in this place I want to do something like cName.mName() // Is it possible
-
Error in smartform driver program.
Hi, I want to know the functionality of form interface and Global definitions.when i am executing driver program i got following error. Field "INTO" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement. coul
-
Silent installation option -suppressPreCopyScript
Hi, I am trying to avoid the message to run the rootpre.sh script during a silent installation and I come across a parameter not very well documented: suppressPreCopyScript Does anybody know what -suppressPreCopyScript parameter exactly do? I check O