How to extend the FI vendor to Purchase organization

Friends,
I have created an FI vendor and customer through FK01 and FD01.  Now the same vendor and customer, i want to extend under purchase organization and sales organization.  How.

Thanks Lakshman.
first I have created an FI vendor and i have done some postings. Afterwards i want to extend to Purchase organization.
Can we do that, actually i have not tried.

Similar Messages

  • How to extend the validity of already limited organization structure

    Dear experts,
    I have limited a purchasing group in the organization structure to a date in the past. The purchasing group is no longer appearing in the organization structure. Now, how I can extend the validity of the organization structure to a future date ?
    Thanks and regards,
    Ranjan
    Ranjan Sutradhar

    Hi Ranjan,
    Kindly go to T-code BP....input the BP number or name of your Purchasing group and change the date under 'Address valid from' and 'Address valid to' date.
    Regards,
    Nikhil

  • Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

    hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
    could you tell me how best to set airport express up to extend my wifi range?

    Greetings,
    This is called an "Extended wireless network".
    Read this article for details and steps on how to extend your TimeCapsule's network:
    http://support.apple.com/kb/HT4259
    Cheers.

  • How to see the ouput of a purchase order on screen??

    Hi all , how to see the output of a purchase order (ME23) on screen?
    Points will be awarded!!!!
    Thanks & Regards
    John

    Hi,
    If any output tye is associated to PO and it is been triggered then User ME9F tocde to view the output.
    To check thise first Use: ME23 and click on Messages, if any outputs are triggered and they are in Yellow status then Use ME9f. Once you execute you will get Outputs in the screen, then choose the output and click on Display Message button. Your output will be displayed on the screen.
    Regards,
    Ashok

  • How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_0

    How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_001 using Functional Module NUMBER_GET_NEXT explain me ?

    Hi,
    First go thourh the FM import export parameters list.
    Try to create an internal table of type INRI-NRRANGENR for number ranges.
    We can provide the lower and higher values for this table so that what ever PO is created will be with that range.
    Try to create the ncessary ones using this FM.
    In the Exit, EXIT_SAPMM06E_001,
    the Export parameters are-
    EKKO-EBELN- the PO ios created with in that specified range
    Range as INRI-NRRANGENR - Here try to assign the Internal table that was populated in the FM.
    Try to code this in the Include provded and keep Breakpint and check the PO number generated.
    Reply if u need more help on this.
    Reward if helpful.
    Best Wishes,
    Chandralekha

  • How to check the hardware vendor of a particular device

    Hi every one
    in the recent interview i have taken he asked me a question like
    how to check the hardware vendor of a particular device
    ex: hard disk ,nic card ,ram
    Thanks in Advance.......

    hi
    depends on OS version
    in RedHat like distros e.g.:
    lspci, lsusb, ls...
    dmidecode|grep -i manuf
    kudzu -p -s
    on Solaris you can use these :
    dladm show-dev
    dladm show-link
    prtconf -D
    kstat [-P]
    Edited by: g777 on 2011-03-11 07:24

  • How to extend the range with a second Airport Express? Do I need a DSL cable?

    How to extend the range with a second Airport Express? Do I need a DSL cable?

    Thanks, now we need a bit more information, please, in order to provide you with the correct information that you need.
    I assume that you already have one AirPort Express.....either a model A1264 or A1392.....set up and operating OK, is that correct?
    If yes, you can extend the network either by using wireless or an Ethernet cable with a second AirPort Express.....either the A1264 or A1392 model. A wired connection is the way to go, if possible, since it provides better performance.  But, wireless might work OK for you if you want to try that.
    Let us know "how" you want to extend......wireless or wired?

  • Hi! Anyone know how to extend the intro of the music I want to use in a video in imovie?

    Hi! Anyone know how to extend the intro of the music I want to use in a video in imovie?

    Hi trineram,
    Welcome to the Support Communities!
    The article below may be able to help you understand the parameters for adding music to an iMovie for iOS project.
    iMovie for iOS (iPad): Add background music
    http://support.apple.com/kb/PH3192
    Cheers,
    - Judy

  • How to extend the time line for the premiere on mac pro mavericks

    how to extend the time line for the premiere on mac pro mavericks

    Wrong place.
    Try the Adobe Premiere forum.
    http://forums.adobe.com/community/premiere
    Good luck,
    x

  • How to extend the costing view for a material

    How to extend the costing view for a material

    Use MM01 Trxn code and Select Material and Select Costing Views and Maintain, Save it.
    Else Use MM50 and Select Material and Mainenance Status as G Costing and Execute, Maintain & Save.

  • How to extend the size of a layer?

    Hi all,
    Hopefully this is an easy one, but I think I'm just thinking about it wrong.  I'm animating the movement of one part of a photo.  I duped the photo layer, masked out the subject I want on the copy layer and have animated its position over time.  Pretty straight forward.  The problem is that as the item moves its edges are seen.  I wanted to just use the clone stamp to add a little more to the image but obviously you can't paint or stamp past the edge of the layer.  So I was trying to figure out how to 'extend' the bounds of the layer a little so that I can fill in the missing area.
    Thanks for any input.
    -Chris

    Hi Todd,
    Thanks for the reply.  Unfortunately, I'm not having any success with this method.  Here's what I have:
    Original photo of kids with ball at playground.  Ball is at lower left but partially cut off. Photo is on layer 1.
    I duplicate layer 1.
    Rename layer 2 to 'ball' and layer 1 to 'bg'
    On ball layer I mask out the ball and then animate its position over the length of the clip.
    When I precompose the ball layer (I tried both moving the attributes and leaving them as is) I get the new composition 'ball comp 1'.  I open up ball comp 1 and change the composition settings to make the width taller.
    So far, so good.  Now I'm trying to follow your suggestion to then paint on the precomposition layer.  Do you mean to go back to the original composition where the new pre-comp layer is and try to paint on it?  If so, that doesn't work.  If I select the Clone tool and try to paint the layer actually gets moved rather than painted on.  If I open the new 'ball comp 1' composition and try to paint there it doesn't work either. And if I open up the layer in that comp that has the ball in it and try to paint there, the edges are still the original edges. 
    Any idea where I went wrong?
    THanks,
    Chris

  • How to extend the range of my Airport Extreme network by adding an Airport Express

    How to extend the range of my Airport Extreme network by adding an Airport Express?

    You have to make sure that the AirPort Express is in Factory Default Settings. If it is straight out of the box, it is ready to be configured.
    The instructions that I will provide are for using AirPort Utility 6.0, which you have.
    Locate the Express in the same room as the AirPort Extreme for the configuration. Power it up and allow a full minute for the Express to display a blinking amber light.
    Make sure that the wireless is turned on your Mac
    Open AirPort Utility 6.0 and look at the small rectangle in the upper left hand corner of the display. It should now read something like "Other AirPort Base Stations (1)"
    Click on the rectangle, and then click on the AirPort Express xxxxxx listing
    AirPort Utility will take a minute or two to analyze the settings on your network and then suggest that  the Express be configured to "Extend" your wireless network.
    Edit the Base Station name to your liking, then click Next in the lower right hand corner
    Allow a full minute or two let AirPort Utility do its work
    When you see Setup Complete, click Done at the lower right of the window.
    Now move the AirPort Express to a location that is approximately half way between the AirPort Extreme and the area that needs more wireless coverage.
    You should be in business.

  • Anyone know how to fix the 5002 error (cannot purchase music from i Tunes)?

    Anyone know how to fix the 5002 error (cannot purchase music from i Tunes)? What's this error about? I searched and couldn't find it on the support page. This is extremely annoying.

    Hello, I just solved my "Error 5200" problem by following these instructions to repair the permissions of the iTunes Music Folder:
    http://docs.info.apple.com/article.html?artnum=93069
    I hope this helps other people!

  • How to Extend the count of item code in IC_ITEM_MST table

    Hi Friends.
    Recently we used 10 count of IC_ITEM_MST table . But we want to extend the count 15. How to define pls help me.
    Regards
    Babu.J

    Duplicate post -- How to Extend the count of item code in IC_ITEM_MST table

  • Hi gurus how to extend the idoc

    hi gurus how to extend the idoc

    HI vasu,
    in order to extend an IDOC goto WE30 tcode.
    1) Give you basic IDOC type at the object name
    2) select the Extension radio button
    3) click on create button
    4) it asks for 3 types of extension . so give the basic IDOC type over there
    5) give description and click on continue button.
    6) so at which segment level you want to add your segment, select that particular segment and click on create segment button and place your already created segment.
    7) save and go back.
    this the procedure of extending an IDOC.
    Reward points if useful....
    thanks,
    satheesh.

Maybe you are looking for

  • Retrieving values from table control using DYNP_VALUES_READ

    Hi all, I am trying to retrieve the values from the table control using the FM DYNP_VALUES_READ. I have a situation where user enter values in table control in T.code FB60 in Withholding tab for validation purpose. There i'll have to check based on s

  • The Sirus-XM APP

    I  m a Sirius/XM subscriber. I got a full year for $20.00 when I bought my car. The trouble is the quality of the satelite section of the   radio that came with my '08 PT Cruiser is only so so. I use my Droid X in Moto's car dock daily and play music

  • XML Data Source Problem

    Hi there, I am creating a data source for XML.... all needed services are there (/SICF) Web service was created..and it is active I create DataSource..and I check it.... everything is Ok until here.. By activating the DataSource I got an error <b>Err

  • Help with Java program and PKGBUILD

    Hey guys, I'm fairly new to Arch and very new to making packages. I write a lot of my stuff in Java, and I know that Java is normally a pain to package on Linux systems. I have had a good look at the Java Packaging Guidelines, http://wiki.archlinux.o

  • USB Hard Drives & RAM Question

    Hi, I've been trying to use this IDE-USB hard drive casing with my macbook, but it doesn't seem to work well. The situation has improved a lot since the firmware upgrade, but its not completely resolved. Other cases seem to work just fine. Funny thin