How to extend the range on a apple tv 2 to an outdoor yard

i have zone two speakers from my receaver in my yard. my apple tv optical is going to my receaver for music. its nice to play music from my ipod touch but i have to be close to my house how can i extend the range a little

how can i extend the range a little
The normal approach would be to purchase a secondary WiFi device (Apple or third-party) to create a WDS (Wireless Distribution System) that extends/relays/repeats the range/signals of your primary device. (I.e., you create one or more remote access points nearer/within range of the location at which you wish to use the target device.)
ADDED: Oops—a bit slow typing...

Similar Messages

  • Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

    hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
    could you tell me how best to set airport express up to extend my wifi range?

    Greetings,
    This is called an "Extended wireless network".
    Read this article for details and steps on how to extend your TimeCapsule's network:
    http://support.apple.com/kb/HT4259
    Cheers.

  • How to extend the range with a second Airport Express? Do I need a DSL cable?

    How to extend the range with a second Airport Express? Do I need a DSL cable?

    Thanks, now we need a bit more information, please, in order to provide you with the correct information that you need.
    I assume that you already have one AirPort Express.....either a model A1264 or A1392.....set up and operating OK, is that correct?
    If yes, you can extend the network either by using wireless or an Ethernet cable with a second AirPort Express.....either the A1264 or A1392 model. A wired connection is the way to go, if possible, since it provides better performance.  But, wireless might work OK for you if you want to try that.
    Let us know "how" you want to extend......wireless or wired?

  • How to extend the range of my Airport Extreme network by adding an Airport Express

    How to extend the range of my Airport Extreme network by adding an Airport Express?

    You have to make sure that the AirPort Express is in Factory Default Settings. If it is straight out of the box, it is ready to be configured.
    The instructions that I will provide are for using AirPort Utility 6.0, which you have.
    Locate the Express in the same room as the AirPort Extreme for the configuration. Power it up and allow a full minute for the Express to display a blinking amber light.
    Make sure that the wireless is turned on your Mac
    Open AirPort Utility 6.0 and look at the small rectangle in the upper left hand corner of the display. It should now read something like "Other AirPort Base Stations (1)"
    Click on the rectangle, and then click on the AirPort Express xxxxxx listing
    AirPort Utility will take a minute or two to analyze the settings on your network and then suggest that  the Express be configured to "Extend" your wireless network.
    Edit the Base Station name to your liking, then click Next in the lower right hand corner
    Allow a full minute or two let AirPort Utility do its work
    When you see Setup Complete, click Done at the lower right of the window.
    Now move the AirPort Express to a location that is approximately half way between the AirPort Extreme and the area that needs more wireless coverage.
    You should be in business.

  • How to extending the range of an existing airport express network?

    I have a Dell PC (Dimension 8100) and a Dell laptop (model Latitude D620). Both use Windows XP.
    I use Airport Express for wireless network - it has worked very well for the past 2 years.
    I purchased another Airport Express in order to extending the range. I have tried setting it up following the instructions but have failed.
    Can someone please help me understand where I could be making an error? Any help will be greatly appreciated. Thanks.

    Wireless Distribution System (WDS) Setup
    (Note: To facilitate setting up the base stations, place them in near proximity of each other during the set up phase.)
    Set up the AirPort Express Base Station (AX) as the WDS Main Base Station, by either connecting to the AX's wireless network or by temporarily connecting directly, using an Ethernet cable, to the Ethernet port of the AX, and then use the AirPort Admin Utility to make the following settings.
    WDS Tab
    - Enable this base station as a WDS: main base station (checked)
    - Allow wireless clients on this base station (checked)
    - Click "+" to add Remote/Relay Base Stations.
    -- Select the Base Station that you want to be the WDS Remote/Relay.
    -- AirPort ID: <verify that this is the correct MAC address for the Base Station you are adding as a Remote/Relay.
    -- Auto configure as a WDS remote base station (checked)
    -- Click "OK."
    - Verify that the Remote/Relay Base Station has been added to the list.
    - Click "Update," and then verify the settings for the Remote/Relay.
    -- Allow wireless clients on this base station (checked)
    -- New network name: <verify that this is the same as the network name for the AX>
    -- TCP/IP: Configure using DHCP
    -- Base Station Password: <the Remote/Relay Base Station password>
    -- Confirm: <same as previous step>
    -- Click "OK."

  • How to extend the range from extreme to express

    I have just bought a airport express and airport extreme. I have been reading the instructions but I cant seem to find the answer on how to extend my wi-fi connection from my extreme through my express. I hope you understand my question.

    Apple's step by step support document for this is here:
    http://support.apple.com/kb/HT4259
    Although the items pictured are two AirPort Extremes, the setup instructions would be exactly the same for an AirPort Extreme and an AirPort Express

  • How do I add an Airport Express to extend the range of my WIFI network with my iMac as a base station?

    Hi people
    I need help to configure a new Airport Express only to extend the range of my WIFI network.
    My ethernet cable from modem is connected directly in my iMac and I am sharing the internet by WIFI inside home very fine.
    Now, I would like connect my devices on my garden on backyard.
    I can't move my iMac from their place and i just want add a Airport Express between the iMac and backyard to extend the range of WIFI.
    But I can't to configure to that. On Airport Utility appear the Airport Express connected directly to internet globe, but don't work.
    So, what can I do? What is wrong?
    Thanks all and best regards.
    Carlos Sgrillo, from Brazil.

    The AirPort cannot do what you ask.
    The Airport needs to connect to a modem, or another router......not to a computer.
    The Express can only extend a wireless signal that has been provided by another Apple router.

  • How do i use airport extreme to extend the range of my imac

    I have an 2012 Imac and I would like to plug the Internet to my imac and use the the imac wireless and use my airport express to extend the range of the imac wireless signal.  I am having an awfully hard time figuring this out - can anyone pass along a link to a document or any suggestions?
    Thanks!

    Apple's instructions for this are here:
    http://support.apple.com/kb/HT4259
    Although two AirPort Extremes are pictured in the example, the setup for a Time Capsule and AirPort Express would be exactly the same.
    In general, a good starting location for the AirPort Express would be a point that is approximately half the distance from the Time Capsule and the area that needs more wireless coverage. You may need to experiment with the location of the Express a bit depending on the number of obstructions like walls and/or ceilings in the signal path

  • I get a neighbor's wifi on my MacBook in my bedroom.  How can I extend the range to the MacMini in my living room?

    I get a neighbor's wifi on my MacBook in my bedroom.  How can I extend the range to the MacMini in my living room?

    You can't. It's not your network.

  • I have an airport extreme and am trying to extend the range of the wireless network with an airport express.  I set it up with the help of apple support, both lights are green on both airports, but the range didn't change.  What could be wrong?

    I am trying to extend the range of my wireless network by adding an airport express to an airport extreme.  I configured it with the help of apple support, but it hasn't changed the range that I can access the internet wirelessly in my house.  What could be the problem?  Does weather affect the wireless network??

    So, on the Extreme you checked the box to "allow this network to be extened" ?
    Correct?
    And on the Express, you set it up to "Extend a wireless network" ?
    Correct?
    See this Apple article and see if you missed anything...
    http://support.apple.com/kb/HT4145
    To learn about other options for expanding your Wi-Fi base station wireless network and things you should consider before expanding your network, click here.
    Set up: Components of an extended network
    ➊  Primary Wi-Fi base station (this is the base station connected directly to the Internet)
    ➋  Extended base station
    Configuring a wireless extended network
    To create a wireless extended network, you must place any extended Wi-Fi base stations within range of the primary Wi-Fi base station.
    Start with the device that will be configured as the primary Wi-Fi base station.  Then configure your extended Wi-Fi base stations, ensuring that each is within direct range of the primary Wi-Fi base station.The physical location of extended Wi-Fi base stations will vary according to the building environment and may require some experimentation.
    If you have configured your Wi-Fi base stations in the past, it may be helpful to do a factory default reset of each Wi-Fi base station that will be part of the wireless extended network before you begin.

  • How can I extend the range of my chart?

    I've asked this question before on here, and found that shift-clicking for more cells has usually worked, but I have now run into a new problem...
    My chart used to cover the range B5:P50. However, since moving a column it now only covers the cell range H5:P50. My chart is on a separate sheet. Usually if I want to add more to the range it will be downwards, so I just click on the chart, then click on the Main Sheet and shift-click to add more cells. Unfortunately, because the range I want is to the left of the highlighted area this time, I can't use shift-click.
    How can I extend the range of my chart so it includes cells to the left of the currently selected range? In Excel I'd be able to just type the range in a box somewhere, rather than all this GUI-based clicking and dragging which is actually more difficult! Is there somewhere I can just type the range in that I want?
    Thanks!

    "I want to add some series that are missing from the chart. How do I do that?"
    Here's a two step process to do that:
    Select the chart to show the the data selection on the associated chart.
    Click in the leftmost column of the data, and drag left to change (move) the selection (blue arrow) for the result below:
    Grab the control handle (small circle) at the bottom right corner of the selection, and drag  right, as indicated by the blue arrow.
    Result shown below.
    Reassign colours and do other formatting as desired.
    Regards,
    Barry

  • How do you set up an Airport Extreme to extend the range of a Verizon router?

    Basically I want to know if the new Airport Extreme can be used fro extend the range of a Verizon modem/router?

    Not by wireless. The apple routers can act as repeaters only to another apple router.
    You can use ethernet or homeplug (EOP adapter) to place the Airport in another location where you need wireless and set it up in bridge mode.
    Or you can buy another airport.. a cheap second hand extreme is very possible.. plug that into  the Verizon by ethernet and extend with the second apple wireless.. but nope.. you cannot do it directly.

  • How do I resolve error 10057 when trying to set up my airport express to extend the range of my wireless network

    I have a Dell XPS running on Windows 7 and use an AirPort Extreme 802.11n Wi-Fi to get wireless internet access for other laptops in the home. I want to connect an AirPort Express 802.11n into the network to wirelessly extend the range of my wireless network. I have installed the AirPort Utility but when I attempt to connect to the AirPort Express, it gives me an error code 10057 and says I should check the internet connection. I have tried resetting the TCP/IP settings on my PC but that did not fix the issue. The Airport Express is also flashing yellow rather than solid green. Has anyone found a fix for this issue?

    This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
    To check and see if  that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
    Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
    You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express.

  • I have an airport extreme attached to cable, then one airport express to extend the range. when i try to add an additional airport express to extend range in another area of house, can't get it to work. unility says it has found a new base station

    i have an airport extreme attached to cable, then one airport express to extend the range. when i try to add an additional airport express to extend range in another area of house, can't get it to work. utility says it has found a new base station and asks if i want to use it. if i click yes, then the old setup is disabled.

    Ok, thanks for clarifying which models you have. Please see the following Apple Support article on how to configure these older base stations for a Wireless Distribution System (WDS).

  • Extending the range of my Extreme n Network with an Express n Airport

    Hello,
    I've been reading some of the questions but couldn't find my specific situation, so here I am posting again. Sorry for the double-post.
    I currently have an AEBS 802.11n acting as my main base station and connected to our DSL modem. In a different room across the house, I have an Airport Express 802.11n which is joined to the network (not extending), and there is a printer connected to it via USB.
    I tried to extend the range of my network, but since I'm using it in dual mode (2.4 & 5GHz), the Express gave me an error of "operation not supported...", or something similar, so I just gave up and instead of extending the network to solidify its strength, I just added the device as a client and hooked up the printer to it - which is working fine.
    Another reason why I'd like to extend the range of the network is because I spend most of the time in the "remote" room, which is 3 rooms away from the AEBS, so I'm not receiving a very strong signal.
    I thought of running an Ethernet cable from the AEBS to the Express, but that would require me to crawl in the attic... not worth the trouble because it's not my home, and I'll be moving out some day.
    I'll also add that I'm somewhat tech-savvy, but wireless networks have always been my weak link (no pun intended).
    How should I set up my equipment in order to get this accomplished?
    Thanks!
    Message was edited by: jortuno

    Here's the general step by step for setting up the "extend" feature on the AirPort Express.
    Because you have a dual band Extreme, you may need to assign different names for the main and guest networks to keep things straight. In AirPort Utility - Manual Setup under the Wireless tab, click on the "Options" button to do this.
    The "main" network is setup as 802.11n 5 GHz by default, so that is what the Express will "extend". If you have "b" or "g" devices at your remote location, you will need to change the Radio Mode for the main network to a compatible setting like 802.11n (802.11b/g compatible).
    _On the AirPort Extreme:_
    Open AirPort Utility, click Manual Setup
    Click the Wireless tab just below the row of icons
    Wireless Mode should be "Create a wireless network"
    Make sure there is a check mark next to "Allow this network to be extended"
    Update to save settings
    _On the AirPort Express(es):_
    Open AirPort Utility, Click Manual Setup
    Click the Wireless tab
    Wireless Mode should be set to "Extend a wireless network". If you don't see this choice, hold down the "option" key when you click on the selection box
    When you select "Extend.." your wireless network created by the TC will appear as a choice to extend. Select the main network and enter the wireless password.
    Make sure there is a check mark next to "Allow wireless clients"
    Update to save settings.
    Whenever you plug the Express in, it will automatically "extend" the main wireless network from the Base Station. Your computer will automatically connect to the device with the strongest signal, so if you are near one of the Express devices, you will be connecting at that point.
    The ethernet port on the Express is also "live" in this setup so you could connect an ethernet device to the Express if you wish.
    For more info on the "extend" feature, refer to the Designing AirPort Networks guide, pages 43-44.
    http://manuals.info.apple.com/enUS/Apple_AirPort_NetworksEarly2009.pdf

Maybe you are looking for