How to extend the range with a second Airport Express? Do I need a DSL cable?

Thanks, now we need a bit more information, please, in order to provide you with the correct information that you need.
I assume that you already have one AirPort Express.....either a model A1264 or A1392.....set up and operating OK, is that correct?
If yes, you can extend the network either by using wireless or an Ethernet cable with a second AirPort Express.....either the A1264 or A1392 model. A wired connection is the way to go, if possible, since it provides better performance. But, wireless might work OK for you if you want to try that.
Let us know "how" you want to extend......wireless or wired?

Similar Messages

How to extending the range of an existing airport express network?

I have a Dell PC (Dimension 8100) and a Dell laptop (model Latitude D620). Both use Windows XP.
I use Airport Express for wireless network - it has worked very well for the past 2 years.
I purchased another Airport Express in order to extending the range. I have tried setting it up following the instructions but have failed.
Can someone please help me understand where I could be making an error? Any help will be greatly appreciated. Thanks.

Wireless Distribution System (WDS) Setup
(Note: To facilitate setting up the base stations, place them in near proximity of each other during the set up phase.)
Set up the AirPort Express Base Station (AX) as the WDS Main Base Station, by either connecting to the AX's wireless network or by temporarily connecting directly, using an Ethernet cable, to the Ethernet port of the AX, and then use the AirPort Admin Utility to make the following settings.
WDS Tab
- Enable this base station as a WDS: main base station (checked)
- Allow wireless clients on this base station (checked)
- Click "+" to add Remote/Relay Base Stations.
-- Select the Base Station that you want to be the WDS Remote/Relay.
-- AirPort ID: <verify that this is the correct MAC address for the Base Station you are adding as a Remote/Relay.
-- Auto configure as a WDS remote base station (checked)
-- Click "OK."
- Verify that the Remote/Relay Base Station has been added to the list.
- Click "Update," and then verify the settings for the Remote/Relay.
-- Allow wireless clients on this base station (checked)
-- New network name: <verify that this is the same as the network name for the AX>
-- TCP/IP: Configure using DHCP
-- Base Station Password: <the Remote/Relay Base Station password>
-- Confirm: <same as previous step>
-- Click "OK."

Can I use an old Airport Express to extend the range of a new Airport Express?

Hi all. I have an old Airport Express 802.11g (First Gen?) that is starting to fade. Still works, but not what it used to be. So I am going to buy a new Airport Express. I'm not interested in the Airport Extreme.
Question: If I use the new Airport Express as my main wireless router, can I plug my old Airport Express into another room as an extender? In other words, with the old Express and the new Express talk to each other or will a new Express only allow extension with another new Express?
Thanks!

Sorry, but the old AirPort Express 802.11 b/g does not have a setting to "Extend a wireless network", so it cannot be used as a extender with the newer AirPort Express if you plan to connect wirelessly.
If you plan to connect the older Express using a permanent wired Ethernet cable connection, then it could be configured to provide additional wireless signal coverage in that manner.

Is it possible to extend the range of one airport express with a second airport express?

Hi,
We have a Time Warner router and have it hardwired to an Airport Express. Is it possible to extend the range of that one airport express with a second airport express?

... The new AirPort Express that I have is an 802.11n version, but the second one is an older model and I don't know which version it might be. Also, the system recently updated so I'm using the AirPort Utility 6.1.
If you are using Mountain Lion, AirPort Utility 6.1 is the version installed by default. It will not be able to administer "older" AirPort base stations.
For them, use AirPort Utility 5.6 which contains the features you need. It can administer your older Express as well as current production base stations.
AU 5.6 is compatible with Lion as well as Mountain Lion, however, the installer app will refuse to install it on Mountain Lion.
This dilemma is easily solved though. You simply need to extract the app from the installer package using a package extractor like Pacifist.
Download Pacifist here: http://www.charlessoft.com/
Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
If you happen to have an archived copy of the AU 5.6 app somewhere, such as a Time Machine backup or equivalent, you can simply restore it or drag the app to your Mountain Lion system's Utilities folder. It will run without complaint. It is only the package installer that is the problem.
Mountain Lion will not allow you to delete its existing version of AirPort Utility. Just ignore it. It and the older version (which will bear the unique name "AirPort Utility 5.6") can peacefully coexist.
Note: For those with Leopard or Snow Leopard systems you need AirPort Utility 5.6.1 (this is confusing - a later AirPort Utility version for an earlier OS X version - but it is correct).
Download AirPort Utility 5.6.1 here: http://support.apple.com/kb/DL1536

Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
could you tell me how best to set airport express up to extend my wifi range?

Greetings,
This is called an "Extended wireless network".
Read this article for details and steps on how to extend your TimeCapsule's network:
http://support.apple.com/kb/HT4259
Cheers.

How to extend the range of my Airport Extreme network by adding an Airport Express

How to extend the range of my Airport Extreme network by adding an Airport Express?

You have to make sure that the AirPort Express is in Factory Default Settings. If it is straight out of the box, it is ready to be configured.
The instructions that I will provide are for using AirPort Utility 6.0, which you have.
Locate the Express in the same room as the AirPort Extreme for the configuration. Power it up and allow a full minute for the Express to display a blinking amber light.
Make sure that the wireless is turned on your Mac
Open AirPort Utility 6.0 and look at the small rectangle in the upper left hand corner of the display. It should now read something like "Other AirPort Base Stations (1)"
Click on the rectangle, and then click on the AirPort Express xxxxxx listing
AirPort Utility will take a minute or two to analyze the settings on your network and then suggest that the Express be configured to "Extend" your wireless network.
Edit the Base Station name to your liking, then click Next in the lower right hand corner
Allow a full minute or two let AirPort Utility do its work
When you see Setup Complete, click Done at the lower right of the window.
Now move the AirPort Express to a location that is approximately half way between the AirPort Extreme and the area that needs more wireless coverage.
You should be in business.

Can an Airport Express be used to extend the range of an existing Airport Extreme?

I would like to extend the range of my existing Airport Extreme. If I connect an Airport express to my existing network will it rebroadcast the WiFi signal and therefore exrtend the overall range?

If I connect an Airport express to my existing network will it rebroadcast the WiFi signal and therefore exrtend the overall range?
The AirPort Express 802.11n can do this if it is located where it can receive a strong signal from the AirPort Extreme in order to "extend" it.

HT4587 How do you extend an airplay signal with a second airport express?

I have a speaker system hooked up to an existing AirPort Express. I just bought another AirPort Express to extend that WiFi signal, but also wanted to extend the existing AirPlay signal as well. I set it up as a WiFi extender and it worked fine; however, it created a seperate option for AirPlay and won't "piggyback" the AirPlay signal off the original AirPort Express. Any help on how to resolve this would be appreicated. Thanks!

I have a modem hooked up to an ethernet hub. From the hub I have an ethernet plugged into the first AirPort Express. In that AirPort Express under the Wireless tab the Network Mode is in Create a wireless network, and under the Network tab the Router Mode is on Off (Bridge Mode). Under the AirPlay tab the Enable AirPlay is checked
The second AirPort Express is just plugged into an outlet with no ethernet hook ups. In that AirPort Express under the Wireless tab the Network Mode is in Extend a Wireless Network, and under the Network tab all the options are greyed out and unclickable. Under the AirPlay tab the Endable AirPay is unchecked. (I have tried checking that box and unchecking the box to see if either has an effect on AirPlay from the original AirPort Express, and either way it does not work). Checking the box just creates a seperate AirPlay channel.
Let me know if you need any other info.

Can I extend the range with an Airport Extreme?

Hi there,
Is it possible to extend a wireless network's range with an Airport Extreme (just like you can do with an Airport Express)? Currently I have a Billion wireless modem/router but need to extend the range so I can use my PS3 in my bedroom. I would rather get an Airport Extreme instead of an Express so I can take it with me when I move out. Just need to know if the Extreme will do this as it doesn't mention it on the website.
Thanks for your time.
Regards,
Daniel

Welcome to the discussions!
+Is it possible to extend a wireless network's range with an Airport Extreme (just like you can do with an Airport Express)?+
The AirPort Express, AirPort Extreme, and even the Time Capsule can "extend a wireless network", +but... they are only compatible if you have another Apple router as the main device.+
Sorry, but none of the Apple products would be compatible to extend the range of your Billion wireless router using wireless only. You might want to check to see if Billion has a "range extender" or similar compatible device.

How to extend the range on a apple tv 2 to an outdoor yard

i have zone two speakers from my receaver in my yard. my apple tv optical is going to my receaver for music. its nice to play music from my ipod touch but i have to be close to my house how can i extend the range a little

how can i extend the range a little
The normal approach would be to purchase a secondary WiFi device (Apple or third-party) to create a WDS (Wireless Distribution System) that extends/relays/repeats the range/signals of your primary device. (I.e., you create one or more remote access points nearer/within range of the location at which you wish to use the target device.)
ADDED: Oops—a bit slow typing...

How to use the airport express to extend the range of an existing airport extreme wireless network?

The instruction manual says nothing on the topic, so maybe it is not possible. The only reason I think it is possible is that two different Apple reps told my girlfriend it was possible. Now we have one, and no clue how to proceed.
We have an Airport Extreme, but its range is maximum 30 feet. We would like to double that. What do we do with the Airport Express? (We cannot move the modem nor the Airport Extreme. What we are trying to do has nothing to do with speakers, iTunes, or printers.)
thanks
Paul

Are both the Extreme and Express 802.11n models? If so, check out this AirPort Support article; if one or both are 802.11g models, check out this article instead.

How to extend wireless range with airport express

I am using 10.6.8....I have a wireless connection and would like to use an airport express to extend my range....the unit model is A1084. I can't find out how to do this in assistant. Does anyone know?

An Airport can extend only another Airport WiFi. It can not extend non-Apple WiFi systems.
I don't know the model numbers and I don't know when the extend capability was added.

How to extend the range from extreme to express

I have just bought a airport express and airport extreme. I have been reading the instructions but I cant seem to find the answer on how to extend my wi-fi connection from my extreme through my express. I hope you understand my question.

Apple's step by step support document for this is here:
http://support.apple.com/kb/HT4259
Although the items pictured are two AirPort Extremes, the setup instructions would be exactly the same for an AirPort Extreme and an AirPort Express

How to extend Virgin Superhub broadband using Apple Airport Express

I need to extend my Virgin Superhub broadband (Which is downstairs) using Airport Express as my playstation looses connection (upstairs) when I'm online (especially when playing Fifa!) any ideas on how to do this as I keep getting a message saying it was unable to extend? Any help would be greatly appreciated.
Thanks Guys
Jazz

If you are trying to configure the Express to "extend" using wireless only, unfortunately that feature is reserved for use with other Apple routers. It would be extremely unlikley that it would work with a product from another manfacturer.
To have the Expesss provide more wireless coverage, you will need to connect it to the Superhub using a wired ethernet connection and configure it to extend that way.

How to look at movies with IPAD3 using Airport express and external disk drive (USB connexion to Airport Express)

I would like to stotre several movies on an external disk drive connected to Airport express through USB port. With my IPAD, I am able to use the WiFi network (generated by Airport) buy I don't see the disk.... how to make it happen ? Thanks. JP A

Shoudl I use ICloud instead or another way ?
I have not tried iCloud for this...and understand that it is mainly for your backups. These link might help:
http://www.apple.com/icloud/get-started/
http://www.apple.com/icloud/setup/
Or, you could post in the iPad support area since that is really what your question is about.

How to extend the range with a second Airport Express? Do I need a DSL cable?

Similar Messages

Maybe you are looking for