How to extend the time line for the premiere on mac pro mavericks

how to extend the time line for the premiere on mac pro mavericks

Wrong place.
Try the Adobe Premiere forum.
http://forums.adobe.com/community/premiere
Good luck,
x

Similar Messages

CS4: How can I copy named potions of the time line to the projects panel?

I am trying to copy named portion of my time line to the project panel & I can't past the segment.
I copied a large AVI file to the time line, split it up into sections, & am trying to place the individual rename section into the Projects Panel. I can Copy the segment, but when I try to Paste it into the Projects Panel the Paste command is not "lighted up".
How can I copy named potions of the time line to the projects panel?

I found a way albeit a tedious method:
positioned the render bar( I do not know the proper name) to encompass each segment separately.
Exported that segment to Media.
Media in turn transferred the segment to the Media Encoder program.
The Media Encoder, after processing the segments, deposited the files in a temporary folder.
Lastly, imported the content of the folder to the Project Panel,
Thank you for all your suggestions.

Im getting a grey box at the bottom of my screen under the display line for the add ons like ghostry,personnas and greasemonkey icons are . i cant seem to get a "full screen" anymore . can you tell me how to overcome this

the box is located under the icon line at the bottom of the screen and above the window tool bar/icon box ! its almost like im running in a wide screen mode ! i cant seem to find a way of making the screen deeper, so it fills all the available space ! its also . freezing and it messes with the add ons and the adobe plugins ! a real shame cause i think the new layout is great . kep up the good work

Do you have that problem when running in the Firefox SafeMode? 
[http://support.mozilla.com/en-US/kb/Safe+Mode] 
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: 
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

When time zone support is on even when I am on Jerusalem, when i create an appointment the time zone for the appointment is immediately changed to Gaza and even when I change it manually it returns to Gaza.

I have a 4s iPhone on IOS 6.0.1 with an Israeli Cellular provider.
I use Gmail services an exchange to sync my colander contacts and mail.
When the time zone support is set to ON in the Settings->mail, Contacts, Calendars->Time Zone Support
The time zone is showing Jerusalem (I am located in Tel-Aviv)
When I create a new Appointment, It Immediately changes the time zone of the appointment to Gaza.
Even if I change it back to Jerusalem it changes back to Gaza every time.
Only when the time zone support is set to OFF in the Settings->mail, Contacts, Calendars->Time Zone Support
The time zone in Gmail is ok and does not appear on the iPhone. (This is ok)
Dose any one know how do I make the iPhone not change the time zone to Gaza? And still keep the time zone support on?
TNX

they are not always on the same time due to daytime saving time changes twice a year in Israel which are not syncronized with any changes in Gaza, Beirut, etc.

Time the length of a boolean value then write that value to a file then reset the timer ready for the next time

I have a VI where I need to time the value of a boolean which I use a tick counter in ms which is fine. So when the value is 'true', the timer starts and when the value is 'false' the timer stops and using an indicator I can see in (ms) the duration which the boolean was true. not a problem (see attached).
But what I need is that duration time to be recorded to file, txt doc or what ever/spreadsheet not fussed at the min. but it needs to be stored!
Once it has successfully stored the time, I want the timer to reset to 0 ready to time the next value and recored it, but not write over the previuosly stored time.
Hope someone can please help. thanks (the labview expert) nooorrrrrwwwwt
Attachments:
timing values and writing them to a file.png ‏10 KB

DailyDose wrote: Tick Count is not a timing duration tool....
That's why you subtract the curent from the previous. That will give you the duration you are looking for. It is accurate to the ms. So if that is all the resolution you need, it works wonderfully. If you need more accurate, then use the High Resolution Relative Seconds instead. If your time length is more than seconds, then start looking at using the system timestamp.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Does anyone know why the time line at the bottom disappears

I am halfway through a bloody video and can't see what i am doing now as the time line with all the video clips has disappeared.
I have reinstalled Premiere Elements 13 but still the same.

Have you tried scrolling down the timeline view?
Have you tried right-clicking on the timeline and selecting the option to remove all empty tracks so that you're not using more vertical space than you need to?

How to build dynamic time series for the time dimension

I am planning to build dynamic time series using rule file instead of manually.Please let me know if there is any property need to assign to enable DTS property for TIME dimension.
Edited by: 844104 on Mar 14, 2011 3:37 AM

In the load rule in the dimension build settings you would need to go to the tab dimension definition, choose the time dimension and right click on it. Select Edit properties. If you have not done so, set the dimension to be the time dimension. Then go to the generations/levels tab and set the generation names you need. For example if you want YTD, you would set the generation name to Year, if you want QTD set it to Quarter. You would set the number to the generation number that coorisponds to the generation. The DBAG has the list of names for all of the DTS members.

I just bought a docking station for my iPad so I could plug into a mixing board and record a live show. I was disappointed at the time limitation for the recordings. What is the maximum amount you can record a song into GB for the iPad?

I purchased a docking station for my iPad so that I could record a live recording of my band directly from a mixing board this weekend using GarageBand. Unfortunately, I was unaware of the song length limitations of the iPad version of this program. Basically, was unable to capture more than 15 minutes of the gig. I've read other conversations on this forum and can't really determine the maximum amount of time this application can record. Can anyone tell me how long GarageBand for ipad can record at one single time and how to adjust the settings to achieve this? Also, is anyone aware of any other apps than could be used to record a longer please share. Thanks.
CP

I received an email reply from George, the Founder and CEO of Studiomini, he indicated to me that their app does not have any time limitations in regards to recording like GB does, you are only limited by the amount of free space on your iPad. Fo what it's worth, I think the Alesis IO Dock is an amazing piece of equipment. I would highly recommend purchasing the IO Dock and plugging your mixing board into the dock to capture your rehearsal. Hopefully the feedback I received from Studiomini is accurate and I can capture my entire rehearsal at one time. I hope this feedback helps. One last note, apparently their will be a update soon to view Studiomni in the landscape view on the iPad instead of just the portrait view.

Can i use the computer while backing up with the time capsule for the first time? the

I would like to install the time capsule. Since it will take some hours to complete the task, do you know if, at the same time, I can work on the computer?
Thank you.

Yes, work away.. it might slow down the backup but not significantly.. make sure you do that first backup by ethernet connection though.. it should take less than over night.. so really not that big a deal.

What is the time peroid for the LR plus PS cc offer?

How long is the LR plus PS CC offer good?

There is no longer any expiry date. The always extended expiry date last year and early this year became rather farcical.
It is now a permanent offer available to anyone.
Adobe Sets Permanent Plan Discount for Photoshop CC + Lightroom | ProDesignTools

How do I scan jump drive for virus on a Mac Pro?

How do I scan a jump drive for a virus on a Macbook Pro?

Kat52 wrote:
Does a new Macbook Pro come with a virus program?
OS X already includes everything it needs to protect itself from viruses and malware. Keep it that way with software updates from Apple. Robust anti-virus and anti-malware protections have been integrated in OS X since its inception, and have only improved in the many years since then. Mavericks represents the beneficiary of all that experience. There is no separate program to install, but there are features you can use and practices you can observe to customize or augment those protections:
OS X Mavericks: Protect your Mac
OS X Mavericks: Protect your Mac from malware
OS X Mavericks: Keep your information safe
OS X About Gatekeeper
About file quarantine in OS X
If you install Windows on your Mac using Boot Camp or virtualization software, Windows requires its own anti-virus measures. That's nothing new.
The following principles are intended specifically for OS X but can be adapted for any operating system or device.
Never install any product that claims to "speed up", "clean up", "optimize", or "accelerate" your Mac. Without exception, they will do the opposite.
Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources. Illegally obtained software is almost certain to contain malware.
Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iTunes or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
Don’t install browser extensions unless you understand their purpose. Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
Don’t install Java unless you are certain that you need it:
Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
Java can be disabled in System Preferences.
Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
Block browser popups: Safari menu > Preferences > Security > and check "Block popup windows":
Popup windows are useful and required for some websites, but popups have devolved to become a common means to deliver targeted advertising that you probably do not want.
Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
If you ever see a popup indicating it detected registry errors, that your Mac is infected with some ick, or that you won some prize, it is 100% fraudulent. Ignore it.
Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
The most serious threat to your data security is phishing. To date, most of these attempts have been pathetic and are easily recognized, but that is likely to change in the future as criminals become more clever.
OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.
Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind.

Sliding video clips along the time line

Quite often as I edit, I like to place clips in the time line forward of my current edit point. For example I might find a shot that works well with a musical swell or beat 30 seconds down the track. With the magnetic time line, I can't slide that shot to the point on the time line without the shot wanting to ping back to the final edit in the time line, or you have to insert place holders or slug. Any ideas for a quick easy way to slid clips?

I had that problem. Solution for me is to take your cursor and not just drag the stuck clips laterally parallel but lift them up slighly in above the time line and move them in any direction. The connecting thin vertical blue line line will still be attached to the TL but some how lifting them up slghtly allows you to drag them anywhere into the TL.
Skyler
San Francisco

How do I programmatically set the scale range for the two y-scales of the two plots

hi,
I am using labview 8.2
To programmatically assign a range to the y-scale of a plot I use a Property Node for the plot display and adjust Y.Scale.Range.Minimum.
How can I assign the ranges of a plot with multiple y-scales?
miethe

One of the problems with using two Y scales is that the display can get very messy is you also want grids on the plot. To address this, I created the attached VI. After allowing the right axis to autoscale, it fine tunes the marker locations so the grid lines for the left and right side overlay each other.
To use it all you have to do is write your data to the graph and then call this VI with a reference to the graph.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
Attachments:
Match Dual Y-Axis.vi ‏25 KB

When setting the split-days to "every 15 minutes," the week and comparison views show incorrect time ranges for the day

When I change the "split-days" interval time, under Options > Settings, to
15, or every 15 minutes, the week and comparison views don't show the correct
time range for the day.

For example, if I click View to display the calendar and then click Week to get
a weekly view, the time range displayed is from 6:00 a.m.
to 4:00 p.m. If I click Comparison to get a
comparison view, the time range displayed is from 12 p.m.
to 6:45 p.m.

In this example, should both of these views show the same time range, from
9:00 a.m. to 4:00 p.m.?
No, the two views will not necessarily show the same time range. The time
range for the comparison view will start at the beginning prefs time only
if you have something scheduled (on any day of the week) starting at that
time. For example, on one of the days during your week of comparison, if you
create an event that starts at 9:00 a.m. and then open the comparison view, the
time range displayed will start with 9:00 a.m.

Additionally, view times will expand past the configured settings if events
span past the time range. That is, if you have an event that spans from
5:00 p.m. to 8:00 p.m., the event will be reflected in the view, even though
your time range may be set to go only to 6:00 p.m.

Umm yes.
The settings are stored in ''prefs.js'', so you could swap various copies of this file in and out.
However, the system will load ''prefs.js'', then, if present, ''user.js'' , so you can set up just your changes in ''user.js'' .
The sort of line you need to look for is like this:
<code>user_pref("mail.server.server14.check_time", 10);</code>
You'll need to do some research to identify which of your accounts is which.
Search for the account's email address:
<code>user_pref("mail.identity.id10.useremail", "xenos@example.com");</code>
Use the id number to locate the account number:
<code>user_pref("mail.account.account29.identities", "id10");</code>
Use the account number to find the server number:
<code>user_pref("mail.account.account29.server", "server14");</code>
Finally, you can then use the server number find the account's time setting:
<code>user_pref("mail.server.server14.check_time", 10);</code>
This last entry may not exist, if you have never changed the setting from the default 10 minutes.
Do be careful with your typing and copy/pasting; if the file fails the syntax parser it will silently fail.
And make sure Thunderbird is shut down when you do the swap. If it's open, it may overwrite changes, and in any case, it only reads the settings file when it starts up.

[SOLVED][GNOME] What is the line for the startup sound?

Hi!
I removed the startup sound from GNOME.
I don't even remember if it did work, but I press the remove button a bit too quickly and there is no confirmation box.
Could you launch gnome-session-properties and tell me the command line for the GNOME startup sound please?
Thanks!
Last edited by Creak (2014-01-17 18:40:13)

Spider.007 wrote:You're welcome! You should also mark this thread [SOLVED]
Done!

How to extend the time line for the premiere on mac pro mavericks

Similar Messages

Maybe you are looking for