How to extend the validity of a validation set to the past?

By t.code GS01 I've created a a set for Valitation rules (OB28).
Then, I've verified that the set isn't valid for the past.
How to extend the validity of the set to the past?
Thanks
Gandalf

Hi,
I think we can not maintain validity dates for Validation.
Just go to T. Code OB28 set your Co Code, Call Point and set activation Level as 1 to activate your validation.
Regards,
JA

Similar Messages

  • Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

    hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
    could you tell me how best to set airport express up to extend my wifi range?

    Greetings,
    This is called an "Extended wireless network".
    Read this article for details and steps on how to extend your TimeCapsule's network:
    http://support.apple.com/kb/HT4259
    Cheers.

  • How to extend the range with a second Airport Express? Do I need a DSL cable?

    How to extend the range with a second Airport Express? Do I need a DSL cable?

    Thanks, now we need a bit more information, please, in order to provide you with the correct information that you need.
    I assume that you already have one AirPort Express.....either a model A1264 or A1392.....set up and operating OK, is that correct?
    If yes, you can extend the network either by using wireless or an Ethernet cable with a second AirPort Express.....either the A1264 or A1392 model. A wired connection is the way to go, if possible, since it provides better performance.  But, wireless might work OK for you if you want to try that.
    Let us know "how" you want to extend......wireless or wired?

  • Hi! Anyone know how to extend the intro of the music I want to use in a video in imovie?

    Hi! Anyone know how to extend the intro of the music I want to use in a video in imovie?

    Hi trineram,
    Welcome to the Support Communities!
    The article below may be able to help you understand the parameters for adding music to an iMovie for iOS project.
    iMovie for iOS (iPad): Add background music
    http://support.apple.com/kb/PH3192
    Cheers,
    - Judy

  • How to extend the time line for the premiere on mac pro mavericks

    how to extend the time line for the premiere on mac pro mavericks

    Wrong place.
    Try the Adobe Premiere forum.
    http://forums.adobe.com/community/premiere
    Good luck,
    x

  • How to extend the costing view for a material

    How to extend the costing view for a material

    Use MM01 Trxn code and Select Material and Select Costing Views and Maintain, Save it.
    Else Use MM50 and Select Material and Mainenance Status as G Costing and Execute, Maintain & Save.

  • How to extend the size of a layer?

    Hi all,
    Hopefully this is an easy one, but I think I'm just thinking about it wrong.  I'm animating the movement of one part of a photo.  I duped the photo layer, masked out the subject I want on the copy layer and have animated its position over time.  Pretty straight forward.  The problem is that as the item moves its edges are seen.  I wanted to just use the clone stamp to add a little more to the image but obviously you can't paint or stamp past the edge of the layer.  So I was trying to figure out how to 'extend' the bounds of the layer a little so that I can fill in the missing area.
    Thanks for any input.
    -Chris

    Hi Todd,
    Thanks for the reply.  Unfortunately, I'm not having any success with this method.  Here's what I have:
    Original photo of kids with ball at playground.  Ball is at lower left but partially cut off. Photo is on layer 1.
    I duplicate layer 1.
    Rename layer 2 to 'ball' and layer 1 to 'bg'
    On ball layer I mask out the ball and then animate its position over the length of the clip.
    When I precompose the ball layer (I tried both moving the attributes and leaving them as is) I get the new composition 'ball comp 1'.  I open up ball comp 1 and change the composition settings to make the width taller.
    So far, so good.  Now I'm trying to follow your suggestion to then paint on the precomposition layer.  Do you mean to go back to the original composition where the new pre-comp layer is and try to paint on it?  If so, that doesn't work.  If I select the Clone tool and try to paint the layer actually gets moved rather than painted on.  If I open the new 'ball comp 1' composition and try to paint there it doesn't work either. And if I open up the layer in that comp that has the ball in it and try to paint there, the edges are still the original edges. 
    Any idea where I went wrong?
    THanks,
    Chris

  • How to extend the range of my Airport Extreme network by adding an Airport Express

    How to extend the range of my Airport Extreme network by adding an Airport Express?

    You have to make sure that the AirPort Express is in Factory Default Settings. If it is straight out of the box, it is ready to be configured.
    The instructions that I will provide are for using AirPort Utility 6.0, which you have.
    Locate the Express in the same room as the AirPort Extreme for the configuration. Power it up and allow a full minute for the Express to display a blinking amber light.
    Make sure that the wireless is turned on your Mac
    Open AirPort Utility 6.0 and look at the small rectangle in the upper left hand corner of the display. It should now read something like "Other AirPort Base Stations (1)"
    Click on the rectangle, and then click on the AirPort Express xxxxxx listing
    AirPort Utility will take a minute or two to analyze the settings on your network and then suggest that  the Express be configured to "Extend" your wireless network.
    Edit the Base Station name to your liking, then click Next in the lower right hand corner
    Allow a full minute or two let AirPort Utility do its work
    When you see Setup Complete, click Done at the lower right of the window.
    Now move the AirPort Express to a location that is approximately half way between the AirPort Extreme and the area that needs more wireless coverage.
    You should be in business.

  • How to Extend the count of item code in IC_ITEM_MST table

    Hi Friends.
    Recently we used 10 count of IC_ITEM_MST table . But we want to extend the count 15. How to define pls help me.
    Regards
    Babu.J

    Duplicate post -- How to Extend the count of item code in IC_ITEM_MST table

  • Hi gurus how to extend the idoc

    hi gurus how to extend the idoc

    HI vasu,
    in order to extend an IDOC goto WE30 tcode.
    1) Give you basic IDOC type at the object name
    2) select the Extension radio button
    3) click on create button
    4) it asks for 3 types of extension . so give the basic IDOC type over there
    5) give description and click on continue button.
    6) so at which segment level you want to add your segment, select that particular segment and click on create segment button and place your already created segment.
    7) save and go back.
    this the procedure of extending an IDOC.
    Reward points if useful....
    thanks,
    satheesh.

  • How to extend the number of rings before phone goes to answering machine?

    On 5S, How to extend the number of rings before the message machine turns on?

    Check with your carrier. It is not an iPhone controllable setting.

  • How to extend the WebUI product search results with customer attributes

    Hello,
    We are using CRM 7.0. We want to extend the WebUI product (Object) searches with customer attributes and to display customer attributes in the search results. We found the note 1026956 that explains how to extend the WebUI product (Object) searches with customer attributes. We want to know if there is also some note that explains how to display customer attributes in the search results for products/Objects.
    Thanks in advance,
    Sergey Kozyrev

    Sergey,
    I doubt whether there exists such note. The note 1026956 which you mentioned is for enhancing the Search for Custom attributes. For Enhancing the Result list you need to do custom development.
    Regards,
    Harshit

  • How to extend the IDoc ORDERS05 and populate values?

    Hi,
    My requirement is to add few fields to the standard IDoc ORDERS05 and populate values to the newly added fields.
    Please let me know how to extend the standard IDoc ORDERS05.
    Regards,
    Balaji. R

    Hi balaji,
    you can try to google for SAP R/3 IDoc Cookbook for EDI and Interfaces by Axel Angeli et.al.
    Although Axel refers primarily to MATMAS Idoc the technique of extending IDOCs is explained very well.
    Also very good is the search function here on SCN, I just found
    [Some Experience on IDoc Enhancement|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3414900%29ID0711317150DB10743789739220747754End?blog=/pub/wlg/8285]
    Blogs and Wikis here are the best source for general questions like yours, usually of much more value than forum answers
    Regards,
    Clemens

  • How to extend the 1k size limit of ODBC?

    Hi everyone,
    My problem is if my SQL string size is over 1k, then ODBC driver will fail. How to extend
    the size?
    Thanks,

    OK, just for clarity, there are two limits that you may be running up against.
    1) There's a limit on the total length of a SQL statement. I would tend to consider it a bug if you could SQLExecDirect a 4k statement by passing in the actual length of the string, but only a 1k statement by indicating that the string is NULL-terminated. If that's actually what you're seeing, you may want to contact Oracle support. I believe this limit was increased between Oracle7 & Oracle8, 512 -> 4096 characters IIRC.
    2) There's a limit on the length of a string literal which should correspond to the maximum size of a varchar2 column. If this is the limit you're hitting, then you want to go the prepare/ bind/ execute route I explained in the previous post.
    Justin

  • How to extend the file system?

    hello experts,
                             how to check wether file system is full?and how to extend the file system?

    Hi,
    You can check whether your file system occupancy using Unix level command df -k.
    how to extend the file system?
    Whats the OS platform you working upon and need to extend the file system. Based on individual OS platform commands may vary.
    Regards,
    Deepak Kori

Maybe you are looking for

  • How many computers can I install iLife '09 onto?

    My dad just bought a new iMac and with it he got iLife '09. Can he and I both install it onto our computers? Mine just has '08. Thanks

  • Do not know how big or small items in image will be after being printed out

    I have just started using photoshop to develop some designs that are meant to be printed on fabric. And then sewn into dresses While I know how to change the size and scale of the image and canvas. I can not tell how big or small the objects or diffe

  • RRMX doesn't start a BEx, I would like to have BEx (3.5)

    Hi all, in our company, the roll out of SAP GUI 7.2 with 3.5 Add-On has started (but different patch levels; some have patch level 5, others became patch level 6). The upgraded GUIs had been SAP GUI 6.4 and 7.1. Our BI System is an SAP NetWeaver BW 7

  • Terms of Payment Key in line item with Special G/L Indicator

    Hi All, Displaying the line item of a financial document with Special G/L Indicator, I can't see the Terms of Payment Key (BSEG-ZTERM). Could anyone tell me how to make it shown? Thanks G.

  • Bom Explosion

    Hi all , i am trying to get the sub components of a single finished material using FM CS_BOM_EXPLOSION. But i am getting error , pls let know where the error is .... Here is the code ....... *& Report  ZBOM_EXPLOSION REPORT  ZBOM_EXPLOSION. *********