How to extend the validity of already limited organization structure

Dear experts,
I have limited a purchasing group in the organization structure to a date in the past. The purchasing group is no longer appearing in the organization structure. Now, how I can extend the validity of the organization structure to a future date ?
Thanks and regards,
Ranjan
Ranjan Sutradhar

Hi Ranjan,
Kindly go to T-code BP....input the BP number or name of your Purchasing group and change the date under 'Address valid from' and 'Address valid to' date.
Regards,
Nikhil

Similar Messages

How to extend the validity of a validation set to the past?

By t.code GS01 I've created a a set for Valitation rules (OB28).
Then, I've verified that the set isn't valid for the past.
How to extend the validity of the set to the past?
Thanks
Gandalf

Hi,
I think we can not maintain validity dates for Validation.
Just go to T. Code OB28 set your Co Code, Call Point and set activation Level as 1 to activate your validation.
Regards,
JA

How to extend the validity period of Cost estimate

Hi Gurus,
The validity period of Standard Cost estimate is up to the end of fiscal year. how can we get the same Cost estimate from the begining of new fiscal year.
for example let Materila X, which has 550 as a Cost estimate.the validity period of this cost estimate is up to 31/03/2009. now i want same cost estimate for Material X, from 01/04/2009 on wards.
is it possible to get the same cost estimate from the 01/04/2009 or Do I need to run CK11N, CK24?
can anybody help me.
Thanks&Regards
Prareddy

hi,
If you want to get the same cost estimate for future use. You have to create a new cost estimate using the Dates as below
Costing date from :01/04/2009
Costing date to :Any date you desire (preferably end of 2009 financial year)
Qty structure date: As of your previous cost estimate for the material X
Valuation date :As of your previous cost estimate for the material X
Using this procedure you will have the old costs ie 550 in the cost estimate but will extend the same to as long as you desire.
Revert back for more information
Thanks

How to extend the FI vendor to Purchase organization

Friends,
I have created an FI vendor and customer through FK01 and FD01. Now the same vendor and customer, i want to extend under purchase organization and sales organization. How.

Thanks Lakshman.
first I have created an FI vendor and i have done some postings. Afterwards i want to extend to Purchase organization.
Can we do that, actually i have not tried.

How to extend the range with a second Airport Express? Do I need a DSL cable?

How to extend the range with a second Airport Express? Do I need a DSL cable?

Thanks, now we need a bit more information, please, in order to provide you with the correct information that you need.
I assume that you already have one AirPort Express.....either a model A1264 or A1392.....set up and operating OK, is that correct?
If yes, you can extend the network either by using wireless or an Ethernet cable with a second AirPort Express.....either the A1264 or A1392 model. A wired connection is the way to go, if possible, since it provides better performance. But, wireless might work OK for you if you want to try that.
Let us know "how" you want to extend......wireless or wired?

Hi gurus how to extend the idoc

hi gurus how to extend the idoc

HI vasu,
in order to extend an IDOC goto WE30 tcode.
1) Give you basic IDOC type at the object name
2) select the Extension radio button
3) click on create button
4) it asks for 3 types of extension . so give the basic IDOC type over there
5) give description and click on continue button.
6) so at which segment level you want to add your segment, select that particular segment and click on create segment button and place your already created segment.
7) save and go back.
this the procedure of extending an IDOC.
Reward points if useful....
thanks,
satheesh.

How to extend the 1k size limit of ODBC?

Hi everyone,
My problem is if my SQL string size is over 1k, then ODBC driver will fail. How to extend
the size?
Thanks,

OK, just for clarity, there are two limits that you may be running up against.
1) There's a limit on the total length of a SQL statement. I would tend to consider it a bug if you could SQLExecDirect a 4k statement by passing in the actual length of the string, but only a 1k statement by indicating that the string is NULL-terminated. If that's actually what you're seeing, you may want to contact Oracle support. I believe this limit was increased between Oracle7 & Oracle8, 512 -> 4096 characters IIRC.
2) There's a limit on the length of a string literal which should correspond to the maximum size of a varchar2 column. If this is the limit you're hitting, then you want to go the prepare/ bind/ execute route I explained in the previous post.
Justin

How to extend the JVue applet class using ActiveX Control

My SR recommendation was to post this here:
) How to Extend the JVue Applet class
This is the preferred solution. However, when using the ActiveX control, my derived JVue class that is specified in autovue.properties is not being instantiated.
Your ActiveX bridge looks like it's hard coding a "new JVue()" which means I have no integration hook using the ActiveX control.
To reiterate, if I extend JVue to add functionality and specify it in the autovue.properties, it is picked up when I run it standalone but if I use the ActiveX component, it is not being picked up.
I have already read all the documentation, have had web conferences with Mahmood and Jeff Chapman and the engineering staff who recommended this approach as the preferred option.

We have a need to override certain VueBean/JVue method calls to meet our document handling(documents need to handle metadata information and hence change the document loading cycle, ie markup loading/XRef resolution is dynamic). Also the invokeAction/invokeSubAction do not allow parameter passing(which we have requirements for certain actions again due to metadata) so we would like to override the invokeAction method to include custom processing(we will encode the action with parameters).
We are already using Custom VueActions for other simpler UI event handling that don't have parameter requirements.
As I said above, these use cases were relayed to the engineering team and senior staff members in early December and we were told that we could proceed with overriding the main class in the autovue.properties file. I have SR(s) opened with a long thread detailing this so I really don't want to go through this again.
A custom VueAction does not seem to work because it binds to late in the object call/event stream.

How to extend the functionality of Smtp through servlets

hi
will some one tell me how to extend the functionality of SMTP server through servelts
bye

[samreenkazi],
Here's some code that might help you get a servlet to send e-mails out by using the sun.net.smtp.SmtpClient class:
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
import sun.net.smtp.SmtpClient;
public class SendMailMessageServlet extends HttpServlet {
static final String to = "[email protected]";
        public void doGet(HttpServletRequest req, HttpServletResponse res)
                                        throws ServletException, IOException {
                res.setContentType("text/html");
                PrintWriter out = res.getWriter();
                //grab the values of each field
                String name = req.getParameter("name");
                String feedback = req.getParameter("feedback");
                String mailfrom = req.getParameter("mailfrom");
                //Notify the sender of his/her feedback
                out.println("<HTML>");
                out.println("<HEAD><TITLE>Mail sent successfully</TITLE></HEAD>");
                out.println("<BODY>");
                out.println("Your e-mail has been sent successfully");
                out.println("</BODY></HTML>");
                //Send an e-mail
                SmtpClient smtp = new SmtpClient(); //assume localhost
                smtp.from(mailfrom);
                smtp.to(to);
                PrintStream msg = smtp.startMessage();
                msg.println("To: " + to); // mailers will display the To: address
                msg.println("From: " + mailfrom); //mailers will display the From: address
                msg.println("Subject: Hello World !");
                msg.println();
                msg.println("Hello World");
                smtp.closeServer();
}Note that the sun.net.smtp.SmtpClient class has limited capabilities. A better alternative is to use the JavaMail API and when you download the JavaMail packages, there are some sample example code that may help you.
HTH.
Allen Lai
Developer Technical Support
SUN Microsystems
http://www.sun.com/developers/support/

How to use the validation work in Both TAB and Mouse keys in Forms6i

Hi,
I have a validation script once it's validated it should execute the query.But using When-Validate-Item i can't use execute_query.I am able to use the validation in Key-Next-Item trigger but if the user moves the cursor using mouse then it's not working.
How to use the validation script working in Both Scenarios(Tab and Mouse keys).
Can anyone please give inputs to rectify the above issue?.

So you have multiple fields, but on at least one of them if it's valid you immediately want to execute the query?
You could create a hidden field in a control block Query_Now default 'N'. In a WHEN-VALIDATE-ITEM on your item, if it's determined to be valid, then set Query_Now to 'Y'.
In a WHEN-NEW-ITEM-INSTANCE at block level, check if Query_Now is 'Y'. If it is then execute the query (and set it back to 'N').

How to use the validation.xml in struts validation?

Can any one please help me, how to use the validation.xml in struts validation? possible please give me simple example.
Edited by: SathishkumarAyyavoo on Jan 31, 2009 12:03 PM

These 2 are the good articles for the beginners to do validation things in Struts. you can follow any one of them.
1. [http://viralpatel.net/blogs/2009/01/struts-validation-framework-tutorial-example-validator-struts-validation-form-validation.html]
2. [http://www.vaannila.com/struts/struts-example/struts-custom-validation-example-1.html]
All the best.

Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
could you tell me how best to set airport express up to extend my wifi range?

Greetings,
This is called an "Extended wireless network".
Read this article for details and steps on how to extend your TimeCapsule's network:
http://support.apple.com/kb/HT4259
Cheers.

On a new imac how much of the HDD is already used with the OS,iLife,apps..

Looking to buy my 1st ever iMac, the one Im going to get is the base one, with 250Gb HDD (I may upgrade to 320Gb for UK £29 though)
My question is how much of the HDD is already used by OS X and everything on it? I understand there is some free trial stuff onthat can be installed eg MS Office, iWork etc I would want these removed as wouldnt want them so how much is left before you start adding your own stuff
I also want to install Win XP on it so need to know what to do, 250Gb in todays computing is very stingy I think, so I need an idea
cheers

Here's are some disk usage information from my 20" white C2D. The numbers
are running totals that include periodic software updates and some of my own
stuff -- but that would be less than 0.5 GB of the final total.
OS-X with "no optional packages" is a very usable system; it includes 'core'
applications such as Safari, iTunes, Quicktime. It does not include any of the
iLife apps or the iWork/MS_Office test-drive bloatwares.
The large increase in disk usage for a minimum Leopard system is partly due
to the inclusion of more apps in the 'core' OS package. Some things that were
optional in Tiger have become part of the "minimum" Leopard install.
The Xcode software development tools are a standard part of every OS-X
distribution, but since most customers have no use for them, they're not
included in the factory-installed disk image. If you don't plan to install
them, subtract 3.4 GB from the final tally.
Factory pre-installed Tiger 10.4.8 & bundled software .................. 16.4 GB
Erase & Install Tiger 10.4.8 with NO optional packages .................. 2.9 GB
SoftwareUpdate to 10.4.10, with NO optional packages .................. 3.1 GB
Erase & Install Leopard 10.5.0 with NO optional packages ............... 6.6 GB
SoftwareUpdate (11/11, immediately after Leopard install) ............. 6.7 GB
Install Xcode SW development tools from Leopard DVD ................. 10.1 GB
Install & SoftwareUpdate iLife'08 (except iWeb & GarageBand) ....... 12.3 GB
SoftwareUpdate to Leopard 10.5.1.................................................. 12.5 GB
IMO, 250 GB is FAR more than you'll ever need for installable software plus
a sizeable collection of music/photos. OTOH, no amount of disk space will
ever be enough for an avid music/photo/video junkie, and everyone should
have an external backup drive. So, stick with the standard internal drive and
buy more external storage.
...a billion here, a billion there -- and pretty soon you're talkin' 'bout alot of money,
Looby

How to get the link of already archived document

Dear all,
How to get the link of already archivied document. for example i have a sales order for which subsequent documents have been archived. now i want to get the link of subsequent document.
please give some solution
Thanks in advance
Thanks,
Hemachandran.

Hemachandran,
The archiving object for sales order is SD_VBAK. If you run the program S3VBAKAU by transaction se38 and search based on the document numbers ( as you mentioned it is the preceeding document numbers to the current document), you will be able to retrieve the information regarding the previous sales orders.
More information on the sales order archiving object can be found at,
http://help.sap.com/saphelp_45b/helpdata/en/a9/55c7b690a111d1a5510000e82deaaa/content.htm
Sojan
<<text removed by moderator>>
Edited by: Matt on Nov 16, 2008 5:08 PM - Do not request points

How to do the Validations in Report Programming?

How to do the Validations in Report Programming?
how to do screen Validations and Field Validations if posssible can any one send the code regarding the Validation ....
Tks
Durusoju

AT SELECTION-SCREEN - selscreen_event
Syntax
| { ON {para|selcrit} }
| { ON END OF selcrit }
| { ON BLOCK block }
| { ON RADIOBUTTON GROUP radi }
| { }
| { ON {HELP-REQUEST|VALUE-REQUEST}
|   FOR {para|selcrit-low|selcrit-high} }
| { ON EXIT-COMMAND }.
Alternatives:
1. ... OUTPUT
2. ... ON {para|selcrit}
3. ... ON END OF selcrit
4. ... ON BLOCK block
5. ... ON RADIOBUTTON GROUP radi
6. ... { }
7. ... ON {HELP-REQUEST|VALUE-REQUEST} FOR
      {para|selcrit-low|selcrit-high} }
8. ... ON EXIT-COMMAND
Effect
These additions allow individual evaluation of specific elements of the selection screens of the program. The information as to which selection has triggered the event is contained in the system field sy-dynnr.
Alternative 1
... OUTPUT
Effect
This event is triggered at the screen event PBO of a selection screen. In the event block, the selection screen can be prepared through assignments to the data objects of parameters and selection criteria and through dynamic screen modifications.
Note
The assignments to input fields in the event block AT SELECTION-SCREEN OUTPUT always affect the selection screen and overwrite the user inputs from previous displays of the same selection screen. Assignments in the event blocks LOAD-OF-PROGRAM oder INITIALIZATION, on the other hand, only have an effect at first program start.
Alternative 2
... ON {para|selcrit}
Effect
This event is triggered at the screen event PAI of a selection screen if the content of the input field of a parameter para or a line of a selection criterion selcrit was passed to the ABAP program. In the event block, the user input can be checked. Sending a warning or an error message in the event block makes the fields para and selcrit ready for input again.
No parameter that is defined as a radio button can be specified. For this purpose, the addition ON RADIOBUTTON GROUP is provided.
Note
If a user action takes place in the dialog box for the multiple selection of a selection criterion selcrit, the entries of the selection table are passed to the program, line by line. For each line, the event AT SELECTION-SCREEN ON selcrit is triggered.
Alternative 3
... ON END OF selcrit
Effect
This event is triggered after the selection table selcrit has been fully passed to the program after a user action in the dialog box for the multiple selection has taken place. In the event block, the entire selection table can be checked.
Alternative 4
... ON BLOCK block
Effect
This event is triggered at the screen event PAI of a selection screen if all the input fields of a block block of the selection screen were passed to the ABAP program. In the event block, the user inputs can be checked. Sending a warning or an error message in the event block makes all the fields of the block block ready for input again.
Alternative 5
... ON RADIOBUTTON GROUP radi
Effect
This event is triggered at the screen event PAI of a selection screen if all the fields of a radio button group radi of the selection screen were passed to the ABAP program. In the event block, the user input can be checked. Sending a warning or error message in the event block makes all the radion buttons of the block radi ready for input again.
Note
The individual fields of a radio button group are not passed individually and do not trigger the event AT SELECTION-SCREEN ON par.
Alternative 6
Effect
The event AT SELECTION-SCREEN itself is triggered as the last event of selection screen processing if all the input values were passed to the program. In this event block, all the user inputs can be checked. Sending a warning or an error message in the event block makes all the screen fields ready for input once again.
Alternative 7
... ON { HELP-REQUEST | VALUE-REQUEST } FOR
    {para|selcrit-low|selcrit-high} }
Effect
The two events ON HELP-REQUEST and ON VALUE-REQUEST are triggered at the screen events POH and POV of a selection screen if - for the input field of a parameter para or one of the input fields of a selection criterion selcrit - the field help F1 or the input help F4 was called. Other selection events are not triggered.
In the event blocks, a self-defined field or input field can be programmed, which overrides any helps possibly defined in the ABAP Dictionary.
Notes
These event blocks can only be implemented for fields of the selection screen that are defined in the same ABAP program and not in a possibly linked logical database.
With the events for the field and input help, no data is transported between the selection screen and the ABAP program. As with general screens, suitable function modules must be used for these. The parameters and selection criteria changed for the input help are transported to the selection screen.
Alternative 8
... ON EXIT-COMMAND
Effect
This event is triggered if the user has called one of the functions Back, Exit or Cancel. In the event block, possible clean-up actions can be executed.
Example
In these executable programs, a standard selection screen and a further selection screen are defined. In the event blocks AT SELECTION-SCREEN, the inputs in the selection screens can be specially handled using the name p_carrid and the screen number in sy-dynnr.
REPORT demo_at_selection_screen.
Global data
DATA: sflight_tab TYPE TABLE OF sflight,
      sflight_wa LIKE LINE OF sflight_tab.
Selection screens
PARAMETERS p_carrid TYPE spfli-carrid.
SELECTION-SCREEN BEGIN OF SCREEN 500.
SELECT-OPTIONS s_conn FOR sflight_wa-connid.
DATA s_conn_wa LIKE LINE OF s_conn.
SELECTION-SCREEN END OF SCREEN 500.
Handling selection screen events
AT SELECTION-SCREEN ON p_carrid.
IF p_carrid IS INITIAL.
    MESSAGE 'Please enter a value' TYPE 'E'.
ENDIF.
AUTHORITY-CHECK OBJECT 'S_CARRID'
                      ID 'CARRID' FIELD p_carrid
                      ID 'ACTVT' FIELD '03'.
IF sy-subrc = 4.
    MESSAGE 'No authorization for carrier' TYPE 'E'.
ELSEIF sy-subrc <> 0.
    MESSAGE 'Error in authority check' TYPE 'A'.
ELSE.
    IF sy-ucomm = 'ONLI'.
      CALL SELECTION-SCREEN '0500'.
    ENDIF.
ENDIF.
AT SELECTION-SCREEN.
IF sy-dynnr = '0500'.
    IF s_conn IS INITIAL.
      MESSAGE 'Please enter values' TYPE 'W'.
    ELSE.
      SELECT *
             FROM sflight
             INTO TABLE sflight_tab
             WHERE carrid = p_carrid AND
                   connid IN s_conn.
      IF sy-subrc <> 0.
        MESSAGE 'No flights found' TYPE 'E'.
      ENDIF.
    ENDIF.
ENDIF.
Main program
START-OF-SELECTION.

How to extend the validity of already limited organization structure

Similar Messages

Maybe you are looking for