How to externally trigger the execution of TestStand with a start and abort button through a digital interface?

Hello,
I'm Currently evaluating TestStand as an alternative for an in-house developed Test Sequencer.
To start our own Test Sequencer we use a small box, connected to a DIO board. The box has a start button and an abort button. The box also has a pass, a fail and a running led.
The interface with this box is made via some digital lines of a PCI-DIO-96.
In our own Test Sequencer we have groups named Init, Run, Abort, Exit.
The Init group is executed at startup (only once). It is used to initialize all the HW and SW. -> I guess this is the Pre UUT Loop callback in TestStand.
The Exit group is only executed once at the end of the day when the application is terminated. It is used to free all the used hardware and cleanup all the resources. This probably is the Post UUT Loop Callback in TS.
When a product needs to be tested, the operator presses the "start" button which triggers our own Test Sequencer and the run and abort group are being executed (first the run group, afterwards the abort group).
When the product is being tested the "running led" of the little box lights up to indicate to the operator that the application is running. (only when the run and abort group are running)
The Run group has all the functional tests in it. (MainSequence)
The abort group is used to put everything back in it's original state after the test on this single product is done. (Post UUT)
When executing the tests and something goes wrong (operator gets stuck in a clamper, ...) the operator can still press the abort button and then the execution immediately jumps from the currently executing step in the run group to the first step of the abort group. So, when something goes wrong, immediately the abort group is called.
At the end of the run and abort group, if no errors occured, the "pass led" lights up. If one or more steps went wrong the "fail" led lights up.
This setup can also be used to test multiple product in parallel. At that time all the different parallel testers have such a small box which contains a "start" and "abort" button and a pass, fail and running led. (it is possible that they are all connected to the same PCI-DIO-96 board. )
My question:
Is it possible to do something similar like this in Teststand? If yes, is there an example available that shows me how to do this in TestStand? (externally trigger the execution of TestStand)
Typically, in the Init group (Pre UUT Loop) the digital interface box gets initialised.
In the Close group (Post UUT Loop) the digital interface box is taken out of scope.
Note: The PCI-DIO-96 board to which the digital interface box is connected will also be used in the rest of the developed application (MainSequence, ...)
What's really important for me is that I can create a process model that all the application developers in our organisation can use. I really don't want any of the application developers (limited software experience) to mess around in all the features of TestStand.
For them it's important that they just add the function DigitalInterfaceBoxInit () in the Pre UUT Loop Callback and the DigitalInterfaceBoxClose () in the Post UUT Loop Callback, and then everything works!
It is important that the appliation developers do not have to create any global variables, other functions, synchronisations, parallel sequences, ... in TestStand. All this needs to be done with a simple call to the DigitalInterfaceBoxInit function.
Thanks in advance for all the help!
Best Regards,
Dennis Vanotterdijk
[email protected]

Dennis-
Your application sounds very well suited to TestStand's abilities. I am also quite impressed with your knowledge of how TestStand's architecture is arranged when you are still just considering whether or not to use it.
I think that TestStand would work really well for you in this application. Like you mentioned it will provide you with a form of standardization for your application developers to work from. It also provides the flexibility for you to add your custom routines in many different places. TestStand also makes parallel and batch testing much easier in TS 2.0 so that you could develop one test for your product and execute different instances of it in parallel to test multiple products at once.
As for your specific question about how to c
ontrol TestStand using a DIO board. I think this is very feasible and should not be too difficult. Since TestStand provides you the ability to create a custom operator interface your operator interface could monitor the status of your DIO board and launch/abort executions based on the read values. Usually the executions are launched/aborted when a button on the GUI is pressed however, I do not see any thing different about basing the action on a DI signal vs a mouse click. I am sure your application is more involved than this high level description but from the sounds of it I think it is very possible to do with TestStand.
Based on my experience of building test systems with TestStand and your description of the application, I would feel very confident in using TestStand to achieve all the goals you mentioned. If you have further detailed questions on how one of your features might be implemented, feel free to contact one of our Application Engineers or email us at www.ni.com/ask
and we would be glad to help you.
Best regards,
Richard McDonell
National Instruments

Similar Messages

How can i update the phone number associated with my iMessage and FaceTime on my macbook air?

I recently moved to the US from Canada and have a new US #. I have updated the phone number on my apple ID but the iMessage and FaceTime on my macbook air are still connected to my old Canadian phone number. How can I update this? Thanks so much!

Associate your mobile number with your Apple ID, if you haven't already done so.
Sign out of iMessage on the Mac:
          Messages ▹ Preferences ▹ Accounts ▹ Sign out
and on the iPhone:
          Settings ▹ Messages ▹ Send & Receive ▹ Apple ID ▹ Sign out
Then, on the phone, tap
          Use Your Apple ID for iMessage
Sign back into iMessage on both devices and test.
Credit for this solution to ASC member SmittyLove and to Glenn Fleishman of tidbits.com.

How do I change the phone number associated with my messages and facetime? It's tied to my husband's number, and needs to be switched to mine.

I'm trying to change the number associated with our ipad's facetime and messages to my number, not my husbands. When I look under settings, it shows his number, but I don't see the opportunity to change or edit the number.

It will not send notifications for that number to that devcie if turnmed off but the number is still active if selected on other devices.
Messages is lionked through the use of your Apple ID and any numbers or email associated to that ID can be set as notifications.
The Phone numbers seem to be registered before email in messages and the easiest method for setup that I have found is to turn messages off on asll devices that you have under that Apple ID.
Then start with your iphone first, turn messagaes on, wait a few minutes for it to completly register.
Then go to the next device and do the same until complete, with each new device A prompt should come up asking if you want to associate the previous contact metyhod with this device.
Here is a help topic from apple on messges as well.
http://support.apple.com/kb/HT3529

How do I create the highest quality pdfs with InDesign CS5 and Acrobat Pro 9? New settings needed?

I sent a lot of jobs to printing companies by sending them high-res proofs on very large, multiple page jobs with lots of photos and graphics. Many companies are requesting that I just send pdfs. I just upgraded to Windows 7 and CS5. I used to have some special settings in my older Acrobat Distiller and InDesign which have been lost. They gave a much better result that what I seem to be getting from the "Press Quality" setting for pdf's. Does anyone have an excellent list of settings that can used to improve the quality of pdf's? I don't know if this is a combination of settings in both InDesign itself, as well as in Acrobat Distiller, or if the settings in one program will solve this. I have a job pending that needs improvement in the pdf quality. Thank you.

Thanks Peter. My last post was specific to using the Print Booklet feature (which is now solved thanks to your help). But this is related to creating high-res pdfs in general that go to printing companies, and being used for sending high-res proofs to clients. In general I don't need to set up printer spreads for my jobs (just for the one I asked about in my other post), but I used to have some specific settings that a printing company supplied me with to give the highest res pdf output possible. Those settings did in fact give a better result than the Press Quality settings built into my Adobe programs. I have had printers over the years request that I create a postscript file, then use distiller (using the settings they supplied) and I got an excellent result. After getting a new computer, Windows 7 and new CS5 and Acrobat Pro 9 upgrade, all of these settings were lost. I have notes on the settings from a couple of years ago, but they don't seem to apply to the CS5 programs in every given area and I feel like there may be just a couple of boxes that either should or shouldn't be checked that I'm missing now.
I understand that this is very specific information, and I may just need to go with the Press Quality settings. The printing company that gave me that great info a while back is no longer in business and other printing companies I have checked with won't spend that kind of time with me (or maybe they don't know anything other than using the Print Quality setting). Maybe within the CS5 program now, the quality of this setting has been improved more than I realize yet. Again, I'm new to CS5 and am just trying to get everything back to the way I used to have things running, and trying to get the best results possible.
Thanks again!

How do I edit the phone number associated with my iCloud and iMessage account.

Hi All,
I recently synced my moms phone onto my MacBook and this has effected my iCloud,Facetime and iMessage accounts on my Mac,iPad and iPhone. When I look at preferences on iMessage and facetime, it lists my moms phone number, how can I edit that phone number to be mine ? We are both on the same iTunes account.
Thanks

Do you not set the phone number within Apple ID
https://appleid.apple.com
and not iCloud?
May be wrong here:(

How do i change the icloud account associated with my iphone and ipad when i forgot the password and no longer have access to the email account?

I have an iPhone 5c and an ipad 3. using the latest version of iOS. I can't delete the old iCloud account on the devices without putting in a password but I don't have it, nor a way to change it via email since the email acct is an old one.

If the old ID is an earlier version of your current ID, temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. You can now use your current password to turn off Find My iDevice on your devices, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

How do I change the settings of sounds occuring when starting and closing?

I'd like to change the sound effects that I hear when booting iMac or closing it, even when error sound occurs. I'm used to doing this in the past on Windows ME and 200 and would like to do it on my new iMac with Snow Leopard (OS X 10.6.2). I don't like the selection on the sounds in the System Preferences, either. Will add others and remove most of what's already there.

Get used to not customizing much at all in Mac OS. I've heard of a few third-party apps that allow you to adjust the volume, but not the sound itself. Check in MacUpdate or VersionTracker.
Along the customizing vein, there are a few programs that allow you to change the look of the windows and icons. I tried them long ago and never saw anything that I liked better, and they always broke when new versions of the OS were released. So, I don't know what the state of those are these days.
To add sounds, make sure they are aiff's and just put them in /Library/Sounds for all users or your username/Library/Sounds just for you. I really don't think you should remove the default ones.

How can I stop the execution on a JSP page and start it again

Hi
I am making a program that simulates how to manage transactions when accessing a database by using locks. I have run into a problem and I hope someone has the time to help me.
When a user does an update the transaction commits and releases its locks when the program executes
<%stmt.executeUpdate("commit!"); %>
I need to put a break in to stop the program executing this statement, to illustrate the lock is set correctly.
I have tried to put in an alert box but this does not prevent the rest of the java code being executed.
I have tried to use prompt boxes, JavaScript functions, but these functions cannot have any java code in them.
I have tried using the java.swing JOptionPane boxes but this didn?t work either
I have tried to get input from the user but I don?t know how to retrieve this data on the same page. (As far as I know you have to use submit and even refresh the page or retrieve it on the next page).
Does anyone know how I can stop the execution on a JSP page and start it again (on same page)
Mette

I already have another client (Tomcat jsp application) running and it throws a SQLException correctly when I don�t put in a commit=true statement and don't close the database connection.
But the problem is how to get the code above to stop to illustrate I have set this lock.
I have tried to use the JOptionPane but because my program is running in a web browser I cannot use the JOptionPane dialog box.
I have tired using an alert box but it executes the commit statement before the alert box is dispayed. So this does not work
While (i < 2)
if( i==1)
%>alert(�The transactions commits when you press Ok�); <% //what it to stop execution here
else
stmt.executeUpdate(�commit�);
I am not using threads so I cannot use the sleep function.
I am using mysql and have already configured it to detect deadlocks and how long to wait for locks.
Thanks for your help
Mette

How can I make the execution of my script faster

Hi everyone
How can I make the execution of my script faster, because it takes a lot of time to execute? The following is my script:
DECLARE
CURSOR C1 IS
SELECT A.ITEM_CODE,A.STORE_CODE,ST_UNIT,SA_UNIT,CART_QTY,QUANTITY_ON_HAND
FROM PROJ.IM_LOCATION A
WHERE A.ITEM_CODE BETWEEN :ITEM_FRM AND :ITEM_TO
AND A.STORE_CODE = :FRM_STORE
ORDER BY
A.STORE_CODE ;
CURSOR C2 IS
SELECT A.ITEM_CODE,A.STORE_CODE,ST_UNIT,SA_UNIT,CART_QTY,QUANTITY_ON_HAND
FROM PROJ.IM_LOCATION A
WHERE A.ITEM_CODE BETWEEN :ITEM_FRM AND :ITEM_TO
AND A.STORE_CODE = :FRM_STORE
ORDER BY
A.STORE_CODE ;
big_syb_qty_issue number(12,3);
small_syb_qty_issue number(12,3);
big_issue number(12,3);
small_issue number(12,3);
item_syb_code varchar2(30);
big_syb_qty_rec number(12,3);
small_syb_qty_rec number(12,3);
BI_SUPP_REC number(12,3);
SM_SUPP_REC number(12,3);
big_syb_qty_ADJ number(12,3);
small_syb_qty_ADJ number(12,3);
big_ADJ number(12,3);
small_ADJ number(12,3);
big_syb_qty_rec_iner number(12,3);
small_syb_qty_rec_iner number(12,3);
BI_INTER number(12,3);
SM_INTER number(12,3);
cl_big_qty number(12,3);
cl_small_qty number(12,3);
cl_big_qty1 number(12,3);
cl_small_qty1 number(12,3);
BIG_QTY_OPEN number(12,3);
SMALL_QTY_OPEN number(12,3);
BEGIN
     IF ((:FRM_STORE IS NULL) OR (:ITEM_FRM IS NULL) OR (:ITEM_TO IS NULL) OR (:DATE_FRM IS NULL)) THEN
          SHOW_MESSAGE('You Should Enter the Parameters Values Correctly Please try again !!!! ');
          RAISE FORM_TRIGGER_FAILURE;
          GO_FIELD('DATE_FRM');
     END IF;
DELETE FROM STOCK_AT_DATE_REP2;
COMMIT;
cl_big_qty := 0;
cl_small_qty := 0;
-- MESSAGE('Please Wait The System Calculating The Transactions !!!');
SET_APPLICATION_PROPERTY(CURSOR_STYLE,'BUSY');
FOR R IN C1
LOOP
cl_big_qty := R.CART_QTY ;
cl_small_qty := R.QUANTITY_ON_HAND;
-- Transerfer Data 1
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(CART_QTY,0)) ,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_syb_qty_issue,small_syb_qty_issue
FROM IM_TRANS_ISSUE_HEADER A,IM_TRANS_ISSUE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.DEL_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('ISSUED BIG'||' '||big_syb_qty_issue);
exception
when no_data_found then big_syb_qty_issue := 0;
small_syb_qty_issue := 0;
when others then MESSAGE(10,sqlerrm);
END ;
-- Goods Received Data From Supplier 1
BEGIN
SELECT B.ITEM_CODE,SUM(B.CART_QTY),SUM(ITEM_QUANTITY)
INTO item_syb_code,big_syb_qty_rec,small_syb_qty_rec
FROM IM_GOODS_RECIEVE_HEADER A,IM_GOODS_RECIEVE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('RECEIVED FROM SUPPLIER BIG'||' '||big_syb_qty_rec);
exception
when no_data_found then big_syb_qty_rec := 0;
small_syb_qty_rec := 0;
when others then message(10,sqlerrm);
END ;
-- Adjustement Data 1
BEGIN
SELECT B.ITEM_CODE ,SUM(NVL(CART_QTY,0)) ADJUST_QTY,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_syb_qty_ADJ,small_syb_qty_ADJ
FROM IM_ADJUST_HEADER A,IM_ADJUST_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND A.DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('Adjust BIG'||' '||big_syb_qty_ADJ);
exception
when no_data_found then big_syb_qty_ADJ := 0;
small_syb_qty_ADJ := 0;
when others then message(10,sqlerrm);
END ;
-- Goods Received Data From Stores 1
BEGIN
SELECT B.ITEM_CODE,SUM(B.CART_QTY),SUM(ITEM_QUANTITY)
INTO item_syb_code,big_syb_qty_rec_iner,small_syb_qty_rec_iner
FROM IM_TRANS_REC_HEADER A,IM_TRANS_REC_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND REC_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- show_message('here');
-- SHOW_MESSAGE('Received From Stores BIG'||' '||big_syb_qty_rec_iner);
exception
when no_data_found then
big_syb_qty_rec_iner := 0;
small_syb_qty_rec_iner := 0;
when others then message(10,sqlerrm);
END ;
cl_big_qty := (NVL(cl_big_qty,0) + NVL(big_syb_qty_issue,0));
cl_big_qty := (NVL(cl_big_qty,0) - NVL(big_syb_qty_rec,0));
cl_big_qty := (NVL(cl_big_qty,0) - NVL(big_syb_qty_rec_iner,0));
big_syb_qty_ADJ := -1 * NVL(big_syb_qty_ADJ,0);
cl_big_qty := (NVL(cl_big_qty,0) + NVL(big_syb_qty_ADJ,0));
-- srw.message(2000,'cl_small_qty'||cl_small_qty);
cl_small_qty := (NVL(cl_small_qty,0) + NVL(small_syb_qty_issue,0));
cl_small_qty := (NVL(cl_small_qty,0) - NVL(small_syb_qty_rec,0));
cl_small_qty := (NVL(cl_small_qty,0) - NVL(small_syb_qty_rec_iner,0));
small_syb_qty_ADJ := -1 * NVL(small_syb_qty_ADJ,0);
cl_small_qty := (NVL(cl_small_qty,0) + NVL(small_syb_qty_ADJ,0));
-- srw.message(2000,'cl_small_qty'||cl_small_qty); srw.message(2000,'cl_small_qty'||cl_small_qty);
INSERT INTO STOCK_AT_DATE_REP2
VALUES(R.STORE_CODE,R.ITEM_CODE,cl_big_qty,cl_small_qty,R.ST_UNIT,R.SA_UNIT,:DATE_FRM,
:DATE_TO,0,0,0,0,0,0,0,0,cl_big_qty,cl_small_qty);
cl_big_qty := 0;
cl_small_qty := 0;
END LOOP;
COMMIT;
FOR R IN C2
LOOP
-- Transerfer Data 2
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(CART_QTY,0)) ,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_issue,small_issue
FROM IM_TRANS_ISSUE_HEADER A,IM_TRANS_ISSUE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.DEL_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('ISSUED BIG'||' '||big_syb_qty_issue);
exception
when no_data_found then
big_issue := 0;
small_issue := 0;
when others then MESSAGE(10,sqlerrm);
END ;
-- Goods Received Data From Supplier 2
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(B.CART_QTY,0)),SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,BI_SUPP_REC,SM_SUPP_REC
FROM IM_GOODS_RECIEVE_HEADER A,IM_GOODS_RECIEVE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('1- SM_SUPP_REC '||' '||SM_SUPP_REC );
-- SHOW_MESSAGE('RECEIVED FROM SUPPLIER BIG'||' '||big_syb_qty_rec);
exception
when no_data_found then
BI_SUPP_REC := 0;
SM_SUPP_REC := 0;
when others then message(10,sqlerrm);
END ;
-- Adjustement Data 2
BEGIN
SELECT B.ITEM_CODE ,SUM(NVL(CART_QTY,0)) ADJUST_QTY,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_ADJ,small_ADJ
FROM IM_ADJUST_HEADER A,IM_ADJUST_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND A.DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('Adjust BIG'||' '||big_syb_qty_ADJ);
exception
when no_data_found then
big_ADJ := 0;
small_ADJ := 0;
when others then message(10,sqlerrm);
END ;
-- Goods Received Data From Stores 2
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(B.CART_QTY,0)),SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,BI_INTER,SM_INTER
FROM IM_TRANS_REC_HEADER A,IM_TRANS_REC_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND REC_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- show_message('here');
-- SHOW_MESSAGE('Received From Stores BIG'||' '||big_syb_qty_rec_iner);
exception
when no_data_found then
BI_INTER := 0;
SM_INTER := 0;
when others then message(10,sqlerrm);
END ;
BEGIN
     BIG_QTY_OPEN := 0;
SMALL_QTY_OPEN := 0;
BEGIN
SELECT NVL(S_BIG_QTY_OPEN,0) ,NVL(S_SMALL_QTY_OPEN,0)
INTO
BIG_QTY_OPEN,SMALL_QTY_OPEN
FROM STOCK_AT_DATE_REP2
WHERE S_STORE_CODE = R.STORE_CODE
AND S_ITEM_CODE = R.ITEM_CODE;
END;
BIG_QTY_OPEN := ((BIG_QTY_OPEN) + NVL(big_issue,0));
BIG_QTY_OPEN := ((BIG_QTY_OPEN) - NVL(BI_SUPP_REC,0));
big_adj := -1 * NVL(big_adj,0);
BIG_QTY_OPEN := ((BIG_QTY_OPEN) + NVL(big_adj,0));
BIG_QTY_OPEN := ((BIG_QTY_OPEN) - NVL(BI_INTER,0));
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) + NVL(SMALL_issue,0));
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) - NVL(SM_SUPP_REC ,0));
SMALL_adj := -1 * NVL(SMALL_adj,0);
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) + NVL(SMALL_adj,0));
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) - NVL(SM_INTER,0));
END;
BEGIN
UPDATE STOCK_AT_DATE_REP2
SET BIG_SUP_REC = BI_SUPP_REC,
SMALL_SUP_REC = SM_SUPP_REC,
BIG_ISSUE_TRAN = big_issue,
SMALL_ISSUE_TRAN = SMALL_issue,
BIG_ADJUST = big_adj,
SMALL_ADJUST = SMALL_adj,
BIG_INTER_REC = BI_INTER,
SMALL_INTER_REC = SM_INTER,
S_BIG_QTY_OPEN = BIG_QTY_OPEN,
S_SMALL_QTY_OPEN = SMALL_QTY_OPEN
WHERE S_STORE_CODE = R.STORE_CODE
AND S_ITEM_CODE = R.ITEM_CODE;
exception
when no_data_found then
NULL;
when others then
message(10,sqlerrm);
END;
END LOOP;
COMMIT;
SET_APPLICATION_PROPERTY(CURSOR_STYLE,'default');
SYNCHRONIZE;
-- SHOW_MESSAGE('The Data Have Been Calculated !!!');
END;
declare
     pl_id ParamList;
APPLICATION_ID VARCHAR2(20):='PRD';
          COMMAND_LINE VARCHAR2(100) :='STOCK_LEDGER';
BEGIN
pl_id := Get_Parameter_List('tmpdata');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('tmpdata');
Add_Parameter(pl_id,'DATE_FRM',TEXT_PARAMETER,:DATE_FRM);
Add_Parameter(pl_id,'DATE_TO',TEXT_PARAMETER,:DATE_TO);
Add_Parameter(pl_id,'ITEM_FRM',TEXT_PARAMETER,:ITEM_FRM);
Add_Parameter(pl_id,'ITEM_TO',TEXT_PARAMETER,:ITEM_TO);
Add_Parameter(pl_id,'FRM_STORE',TEXT_PARAMETER,:FRM_STORE);
IF :REPORT_TYPE = 1 THEN
Run_Product(REPORTS,'C:\INV\RDF\STOCK_LEDGER.rdf',SYNCHRONOUS,RUNTIME,
FILESYSTEM, pl_id,NULL);
ELSIF :REPORT_TYPE = 2 THEN
Run_Product(REPORTS,'C:\INV\RDF\STOCK_LEDGER_2.rdf',SYNCHRONOUS,RUNTIME,
FILESYSTEM, pl_id,NULL);
END IF;
END;
Waiting for your valuable answer
Best Regards
Jamil Alshaibani

Make a matte in Photoshop.
From the Photoshop menu bar: File > New > Film & Video Presets. Choose one that suits your FCP project pixel dimensions. Make the background black. Place a white rectangle with rounded corners on top (the white will determine how much of your picture is visible). Flatten Image. Save as TIFF. Import into FCP.
Move your video clips up to V2. Place the imported TIFF on V1. Highlight all clips on V2.
Go to Modify > Composite Mode > Travel Matte Luma. Done.
If you want soft edges, no need for a matte. Double click your clip to place it in the Viewer. Open up the Motion tab > Crop > Edge Feather. Nice and quick. Copy and Paste attributes for the other clips.

How i can find the execution plan

how i can find the execution plan for a quesry , and how i can compare two execution plan

Mohan,
Just create a table as follows
CREATE TABLE T1 (STATEMENT_ID VARCHAR2(30),TIMESTAMP DATE,OPERATION VARCHAR2(30),
          OPTIONS VARCHAR2(30),OBJECT_NAME VARCHAR2(30),COST NUMBER(38),
          ID NUMBER(38),PARENT_ID NUMBER(38), OBJECT_NODE VARCHAR2(128),
          OBJECT_OWNER VARCHAR2(30),OBJECT_INSTANCE NUMBER(38),OBJECT_TYPE VARCHAR2(30),
          OPTIMIZER VARCHAR2(255),SEARCH_COLUMNS NUMBER,POSITION NUMBER(38),
          PARTITION_START VARCHAR2(255),PARTITION_STOP VARCHAR2(255),PARTITION_ID NUMBER(38),
          CARDINALITY NUMBER(38),BYTES NUMBER(38),OTHER_TAG VARCHAR2(255),
          OTHER LONG,REMARKS VARCHAR2(80),DISTRIBUTION VARCHAR2(30)
Now use the sql statements as
> EXPLAIN PLAN INTO T1 FOR (SELECT * FROM EMP);
> Select * from T1
this should do the job . . .
Regards,
K.T. Gandhi Karuna

How can we trigger the BAdI MD_PIR_FLEX_CONS in a MTS strategy

Hi All!
We have 5 Plants: 4 commercial plants and 1 production plant.
The sales orders are created in the commercial plants with a Make-to-order with consumption Requirements type; (Individual customer stock is an issue of the client).
Planned independent requirements are entered at finished product level with Consumption indicator for planning requirements 4 - Flexible Consumption for Different MRP Elements (BAdI); we create the purchase order (L - Subcontracting) for the finished product based on the PIR.
We need to do the consumption and reduction of planned independent requirements based on the purchase orders creation or in the Goods Receipt for the Outbound Delivery.
We implemented the BAdI MD_PIR_FLEX_CONS but the BAdI isnu2019t trigger for Planning strategy 10 or 40 but. The BAdi is trigger only when Requirements class of the Requirements type of independent requirements as value 2 (Consume planning w/o assembly) in the Consumption indicator and value 3 (Single-item planning) in the Planning Indicator.
How can we trigger the BAdI in a MTS strategy u2013 The BAdI documentation doesnu2019t mention that can only be used in MTO strategy?
Thanks.
Regards.
Adelino

Hello Adelino
Strategy 10 is a special business case without consumption and only with the PIR reduction during the delivery (goods issue). You can see in customizing OPPS that both requirements KSL and LFS are set with "No consumption with customer requirements". In this case, BAdI MD_PIR_FLEX_CONS is not called.
The BAdI can be used with strategy 40, so please make sure that the consumption indicator of the PIR is set to '4 - Flexible Consumption for Different MRP Elements (BAdI)'.
BR
Caetano

How to use Real time execution trace toolkit with Dual-core processor??

hi there
the situation as follows:
i have a computer (PC and Laptop) types with Dual-core processors, and am trying to do simulation using Multi-core technology and based on different simulation scenarios...starting from sequantial processing,.......Piple lining processing strategy. so that i can differentiate the time delay between those types of processing based on (Using 1 processor then dual-core processor Computers)
my question is: As i read through Ni's white papers i saw many notes refer to Real-time execution trace toolkit to investigate the (processing-time , etc) of multi-core processors in processing diffenent algorithms. My algorithms are to be run on 1 computer with dual-core processor BUT, not in real time environments, that is ( No hardware to be connected to my pc) only algorithms running on my pc....
So, is it possible to use Real time execution trace toolkit or anyother tools in LabVIEW to show processing-delays and/or anyother timing critical issues without using my application for real- time hardware.???
in other words: how to use Real time execution trace toolkit in non-hardware and/or real-time scenarios???
please help me in this.
Any suggestion, comments, feedback.....is absolutely highly appreciated
thanks a lot in advance
Labview Lover

Hey,
The Realtime Execution Trace Toolkit only works for NI RT Targets.
But you can use the Desktop Execution Trace Toolkit, just search for it under ni.com.
Christian

How Can I Driving the PXI Backplane Clock with a PXI-6608?

How Can I Driving the PXI Backplane Clock with a PXI-6608?
Is the PXI Backplane Clock the timebase of the PXI Trigger BUS?
How Can I use a PXI-6608 as the timebase of the PXI Trigger BUS?
Thanks!

Hi,
The 6608 must be in slot 2 of the chassis. Once you make a call to the DAQ driver, the OCXO on the 6608 will be routed to the PXI_Clk 10 line.
More information on the backplane and routing clock signals can be found in these Knowledge Bases:
http://digital.ni.com/public.nsf/websearch/5EC370419A5ECA7A86256CFC0061C528?OpenDocument
http://digital.ni.com/public.nsf/websearch/D5B8D4D3B67DF1E086256BF8007BBF93?OpenDocument
I hope this helps. Have a Great Day!
George

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

read this
https://discussions.apple.com/message/20429789#20429789

I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone. The missing movies are shown as generic movie icons in the iTunes panel. How do I get the original movies to show up again and transfer to the iPhone?

I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone 5. The missing movies are shown as generic movie icons in the iTunes panel and are checked to select them. But they do not show up in iPhone Videos. How do I get the original movies to show up again and transfer to the iPhone? I recently upgraded Mac OS to 10.6.8

1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
tt2

How to externally trigger the execution of TestStand with a start and abort button through a digital interface?

Similar Messages

Maybe you are looking for