How to extract a file from a file (not application) package?
Hi folks, I'm trying to access directly the document.xml file that sits inside a MindManager file, to parse the XML and read information that has been added to a mind map but which does not get exported by this application's standard export options.
Opening the file with Text Wrangler reveals an internal 'package' structure within the file - including a Document.xml file. However, OSX seems to treat these 'packages posing as files' differently to 'packages posing as applications', where in Finder it's possible to Show Package Content, and files can be accessed directly.
Maybe there is a way to either change the way OSX manages these files within files - or just access this file to copy it or its contents out into a separate plain text file?
Any ideas much appreciated.
Best,
Keith..
Thanks ds store - a good point regarding Pacifist.
Sorry, I should have mentioned that I already have Pacifist - I used it to prove to myself that these files were indeed packages when I saw the structure in Text Wrangler's Disk Browser. It does reveal the contents of MindManager files with its open package option and so, yes, I could use Pacifist to copy out the XML file.
However, I need to track changes in several target files, so I really need direct access to the xml files (or their text content) to automate the process - so I was hoping to simply enable the Finder's Show Package Contents option for this type of file.
Automation with Pacifist would require writing Apple Scripts and/or Automator and if I'm going to take that approach, I may as well control Text Wrangler to extract the XML text from inside each xml file, rather than work at the xml file level.
Best,
Keith..
Similar Messages
-
How to extract binary data from a File?
Hello there!
Hope I'm right here.
I have a slight problem with a file containing text- and binary-data. At the beginning of the file is only some text followed by some html-code and at the end is some binary stuff like a pdf oder an image (jpg/gif).
My problem is now how to split these parts and save them in the suitable format. The text and the html are no problem, but I don't know how to extract the binary data. I tried it out with an Inputstream, but I don't know how to find the exact position where the binary data begins.
Anyone have an idea how I can solve this?
Thanks in advance and sorry for my bad english.I don't believe a bullet-proof solution exists.
If you know where the HTML ends, you may skip whitespace and then assume the rest is binary data. Or, if you know the first bytes of the binary data, you may locate those. With either of these solutions, though, you risk coming across a file where it doesn't work as expected, for example if the first byte of the binary data happens to match a whitespace character. -
How to extract the image from pdf file
Hai friends........
Is it possible to extract the images in a page from pdf file.
If so. please share with me.......
Thanks in advance,
abuIn later versions of Acrobat you can select an Image with the Select tool, then right-hand click for Save options.
------------->
It helps if you quote your exact version of Adobe Acrobat/Reader - choose [Help, About...] to find this.
Also useful: Version numbers of other software (e.g. Word) if relevant. Age of computer and amount of memory (RAM) available (r/h cllcking on 'My Computer' and choosing Properties gives you this, plus processor speed). -
How to extract the mailboxes from *.edb files
I am using windows 2007, SP2, 64 bit operating system and exchange server 2007 on top it.
I have migrated my users to a third party solution.
Unfortunately, during this migration, there are 2 uses who seems to have lost few e-mails (nearly 2 weeks e-mails ..not sure how that happened but the backup PST does not have it hence it was not uploaded to the third party provider ...)
How do i get the pst from .edb file so I can put it again to synch with the new platform ??Hello,
You may do a single mailbox recovery by referring to:
How to recover or restore a single mailbox
http://support.microsoft.com/kb/813337
Thanks,
Simon -
How to extract rpt file from .b1px file in SAP B1
How to extract rpt file from .b1px file in SAP B1
Hi Trupti,
You will not be able to export .b1px file without importing in SAP B1.
Please import .b1px file in SAP B1 and then export .rpt file from SAP B1 one by one.
Hope this helps
Regards::::
Atul Chakraborty -
Not able to extract performance data from .ETL file using xperf commands.
Xperf Commands:
xperf –i C:\TempFolder\Test.etl -o C:\TempFolder\BootData.csv –a process
Getting following error after executing above command:
"33288636 Events were lost
in this trace.
Data may be unreliable
This is usually caused
by insufficient disk bandwidth for ETW lo
gging.
Please try increasing the minimum
and maximum number of buffers
and/or
the buffer size.
Doubling these values would be a good first at
tempt.
Please note, though, that
this action increases the amount of me
mory
reserved
for ETW buffers, increasing memory pressure on your sce
nario.
See "xperf -help start"
for the associated command line options."
I changed page size file but its does not work for me.
Any one have idea, how to solve this problem and extract ETL file data.I want to mention one point here. I have total 4 machines out of these 3 machines above
commands working properly. Only one machine has this problem.<o:p></o:p>
Hi,
I consider that you can try to use xperf to collect the trace etl file and see if it can be extracted on this computer:
Refer to following articles:
start
http://msdn.microsoft.com/en-us/library/windows/hardware/hh162977.aspx
Using Xperf to take a Trace (updated)
http://blogs.msdn.com/b/pigscanfly/archive/2008/02/16/using-xperf-to-take-a-trace.aspx
Kate Li
TechNet Community Support -
Use LINQ to extract the data from a file...
Hi,
I have created a Subprocedure CreateEventList
which populates an EventsComboBox
with a current day's events (if any).
I need to store the events in a generic List communityEvents
which is a collection of
communityEvent
objects. This List needs to be created and assigned to the instance variable
communityEvents.
This method should call helper method ExtractData
which will use LINQ to extract the data from my file.
The specified day is the date selected on the calendar control. This method will be called from the CreateEventList.
This method should clear all data from List communityEvents.
A LINQ
query that creates CommunityEvent
objects should select the events scheduled for selected
day from the file. The selected events should be added to List
communityEvents.
See code below.
Thanks,
public class CommunityEvent
private int day;
public int Day
get
return day;
set
day = value;
private string time;
public string Time
get
return time;
set
time = value;
private decimal price;
public decimal Price
get
return price;
set
price = value;
private string name;
public string Name
get
return name;
set
name = value;
private string description;
public string Description
get
return description;
set
description = value;
private void eventComboBox_SelectedIndexChanged(object sender, EventArgs e)
if (eventComboBox.SelectedIndex == 0)
descriptionTextBox.Text = "2.30PM. Price 12.50. Take part in creating various types of Arts & Crafts at this fair.";
if (eventComboBox.SelectedIndex == 1)
descriptionTextBox.Text = "4.30PM. Price 00.00. Take part in cleaning the local Park.";
if (eventComboBox.SelectedIndex == 2)
descriptionTextBox.Text = "1.30PM. Price 10.00. Take part in selling goods.";
if (eventComboBox.SelectedIndex == 3)
descriptionTextBox.Text = "12.30PM. Price 10.00. Take part in a game of rounders in the local Park.";
if (eventComboBox.SelectedIndex == 4)
descriptionTextBox.Text = "11.30PM. Price 15.00. Take part in an Egg & Spoon Race in the local Park";
if (eventComboBox.SelectedIndex == 5)
descriptionTextBox.Text = "No Events today.";Any help here would be great.
Look, you have to make the file a XML file type -- Somefilename.xml.
http://www.xmlfiles.com/xml/xml_intro.asp
You can use NotePad XML to make the XML and save the text file.
http://support.microsoft.com/kb/296560
Or you can just use Notepad (standard), if you know the basics of how to create XML, which is just text data that can created and saved in a text file, which, represents data.
http://www.codeproject.com/Tips/522456/Reading-XML-using-LINQ
You can do a (select new CommunityEvent) just like the example is doing a
select new FileToWatch and load the XML data into the CommunityEvent properties.
So you need to learn how to make a manual XML textfile with XML data in it, and you need to learn how to use LINQ to read the XML. Linq is not going to work against some flat text file you created. There are plenty of examples out on Bing and Google
on how to use Linq-2-XML.
http://en.wikipedia.org/wiki/Language_Integrated_Query
<copied>
LINQ extends the language by the addition of query
expressions, which are akin to
SQL statements, and can be used to conveniently extract and process data from
arrays, enumerable
classes, XML documents,
relational databases, and third-party data sources. Other uses, which utilize query expressions as a general framework for readably composing arbitrary computations, include the construction of event handlers<sup class="reference" id="cite_ref-reactive_2-0">[2]</sup>
or
monadic parsers.<sup class="reference" id="cite_ref-parscomb_3-0">[3]</sup>
<end>
<sup class="reference" id="cite_ref-parscomb_3-0"></sup> -
Error in running Extract Definition Upload from Data File concurrent.
Hi all,
Am trying to upload the 834 Extract Layout from the data file by running the concurrent program, Extract Definition Upload from Data File.
After running this concurrent program am getting the Extract Layout definition with Record layout and Data elements within it.
But some record layouts has the changes at their repeating level in that.
Please suggest me how do i get the same repeating levels for the record layouts when i move the 834 benefit extract layout definition
from one instance to another instance.Hi,
We have exactly the same error in IBolt. This error happens sometime and we don't find the reason.
IBolt has been upgraded to Version 3.1 SP1 and a fix has been developed by the support. After installation, we've work hardly during 2 days for testing all the flows by the customer without having this error.
Ibolt works as a service and when this error occurs, the service stopped and must be restarted.
In our flows, we have put a delete of the observer.dll file just before the rest of the flow but it doesn't solve the problem.
Deleting the directory can be temporarly a solution but the error come back another day.
Each time the SBO client or DTW is started, the %temp%\SMS_OBJ_DLL directory is created...
When you just delete the observer.dll file and leave the rest of the directory like it is, the file is re-created when you start and log to SBO. I would say that this file is a copy of another file observer_800178.dll (800178 depending of the version of SBO yoi have). 800178 corresponds to SBO 2007 A PL 42.
Do you have more information since your post has been send ?
Thanks in advance for your help.
Best regards. -
How to extract the contents of ZIP file stored in oracle database column ?
The file is in ZIP format and it is stored in BLOB databse column . The contents of file is in binary format .
How to extract those contents from file and thus creating the same ZIP file as output in ODI ?
Thanks
ArunPerhaps you can something like what is described in the support note "How To Load A PDF File Or Other Binary Files To a BLOB Column From ODI (Doc ID 1412753.1)"
-
Extract all attachments from .eml file
Hi
I have a .eml file saved to disk.
I want to extract all attachments that it contains into separate files.
Can anyone help me regarding this issue?
ThanksHi,
Did you had already success extracting the attachments from .eml File?
I'm also looking how to do this, but have not much success yet.
Thank you,
Stefan -
Extracting openvpn certificates from ovpn file
Hi,
I was curious about how to extract openvpn certificates from the ovpn configuration file,
basically on the ovpn config we have:
<ca>
begin/ end certificate
</ca>
<cert>
begin / end certificate
</cert>
<key>
begin / end rsa private key
</key>
normally when we use the file like openvpn --config file.ovpn it works, but on some network manager versions you cannot import correctly.
How can we extract the certificates from command line?
Any explanation to also the purpose of each certificate and how it's generated and used would be much appreciated.You can extract the certificates with cut and paste, with any graphical editor like gedit, kate, or even vi. Remember that you must introduce into the remaining file (i.e., what remains after you have removed the cryptographic keys) instructions as to where to find the keys:
ca /path/to/ca.crt
cert /path/to/name.crt
key /path/to/name.key
A simple introduction to how to generate the certificates can be found, for example, in the wiki: search for ": Create a Public Key Infrastructure Using the easy-rsa Scripts." Basically, there is a series of scripts that will take care of this for you.
As to the mathematical meaning of cryptographic keys, it is too complex to be easily accessible to anyone not doing a Ph.D. in number theory. But you can easily find amusing popular articles just about everywhere, beginning with Scientific American. -
How to store multiple files from SAp in to Application server?
Hi Guys,
Can anybody tell me how to store multiple files from SAP into Application server.in my application i have to get the data from SAP tables BSEG , BKPF , BSAK and BSIK that to daily i have to do.
Any Logic or Code for how to do is welcomed.
plz help me urgently.
Thanks,
GopiHi,
directories creates basis. If you have task to store data in application server you already should have information into which folder you have to do it. If you don't have this information because it is just for example training for next task then you can use your personal folder into which you have access. To get list of all available folders please look at attached code and form get_directories (you get the list of folders you see in transaction AL11). But don't forget: If you are using open dataset you have to have rights to access application folder!
Here you are code which I use to upload text files from local disc into application folder
Regards,
Karol
*& Report FILE_PC_TO_SAP
REPORT FILE_PC_TO_SAP.
DATA: BEGIN OF searchpoints OCCURS 100,
DIRNAME(200) TYPE c, " name of directory.
sp_name(100) TYPE c," name of entry. (may end with *)
END OF searchpoints.
DATA: BEGIN OF isearchpoints OCCURS 10,
dirname(75) TYPE c, " name of directory.
aliass(75) TYPE c, " alias for directory.
svrname(75) TYPE c, " svr where directory is availabl
sp_name(75) TYPE c, " name of entry. (may end with *)
sp_cs(10) TYPE c, " ContainsString pattern for name
END OF isearchpoints.
data: l_file type filetable.
data: l_rc type i.
data: itab type TABLE OF string.
data: g_tmp_file_path type rlgrap-filename.
data: wa_itab type string.
data: h_destin(100) type c.
data: dat type string.
INITIALIZATION.
perform get_directories.
START-OF-SELECTION.
parameters: in_file type string OBLIGATORY LOWER CASE.
parameters: destin(100) type c OBLIGATORY LOWER CASE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = in_file
"FILETYPE = 'BIN'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = ' '
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
TABLES
DATA_TAB = itab
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
IF sy-SUBRC <> 0.
write: / 'Error during loading input file!'.
ENDIF.
if h_destin is INITIAL.
h_destin = in_file.
endif.
CONCATENATE destin h_destin into dat SEPARATED BY '/'.
*TRANSLATE dat TO UPPER CASE.
OPEN DATASET dat FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-SUBRC = 0.
loop at itab into wa_itab.
TRANSFER: wa_itab TO dat.
endloop.
CLOSE DATASET dat.
write: / 'File uploaded!'.
ELSE.
write: / 'Not possible to open dataset'.
ENDIF.
at selection-screen on value-request for in_file.
perform select_input_file_name.
loop at l_file into g_tmp_file_path.
move g_tmp_file_path to in_file.
h_destin = ''.
SPLIT g_tmp_file_path at '\' into table itab.
loop at itab into g_tmp_file_path.
h_destin = g_tmp_file_path.
endloop.
endloop.
at selection-screen on value-request for destin.
DATA: lt_dfies TYPE TABLE OF dfies.
DATA: lwa_dfies TYPE dfies.
CALL FUNCTION 'DDIF_FIELDINFO_GET'
EXPORTING
tabname = '/BI0/PCO_AREA'
lfieldname = 'CO_AREA'
IMPORTING
dfies_wa = lwa_dfies.
lwa_dfies-tabname = 'searchpoints'.
lwa_dfies-REPTEXT = 'Destination directory'.
lwa_dfies-LENG = 100.
lwa_dfies-INTLEN = 100.
lwa_dfies-OUTPUTLEN = 100.
lwa_dfies-fieldname = 'SP_NAME'.
APPEND lwa_dfies TO lt_dfies.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'SP_NAME'
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'destin'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = searchpoints
FIELD_TAB = lt_dfies
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
*& Form select_input_file_name
* text
form select_input_file_name.
* call function 'F4_FILENAME'
* exporting
* program_name = sy-repid
* dynpro_number = sy-dynnr
* field_name = 'PATH'
* importing
* file_name = g_tmp_file_path.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'Please choose a file'
"default_extension = '*.TXT'
"default_filename = 'C:\*.txt'
initial_directory = 'C:\'
file_filter = '*.*'
CHANGING
FILE_TABLE = l_file
RC = l_RC
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
ERROR_NO_GUI = 3
NOT_SUPPORTED_BY_GUI = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. "select_input_file_name
*& Form WRITE_DB_HOME
* Write DB home directory
* no parameters
FORM write_db_home.
CASE sy-dbsys(3).
WHEN 'ORA'.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ORAHOME'
ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_ORAHOME', 30 searchpoints-dirname.
MOVE: 'DIR_ORAHOME' TO searchpoints-sp_name.
APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
WHEN 'ADA'.
CALL 'C_GETENV' ID 'NAME' FIELD 'DBROOT'
ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_ADA_DBROOT', 30 searchpoints-dirname.
MOVE: 'DIR_ADA_DBROOT' TO searchpoints-sp_name.
APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
WHEN 'INF'.
CALL 'C_GETENV' ID 'NAME' FIELD 'INFORMIXDIR'
ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_INF_INFORMIXDIR', 30 searchpoints-dirname.
MOVE: 'DIR_INF_INFORMIXDIR' TO searchpoints-sp_name.
APPEND searchpoints..
*--- C5056155 End of ALV -------------------------------*
WHEN 'DB6'.
CALL 'C_GETENV' ID 'NAME' FIELD 'INSTHOME'
ID 'VALUE' FIELD searchpoints-dirname.
IF sy-subrc = 0.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_DB2_HOME', 30 searchpoints-dirname.
MOVE: 'DIR_DB2_HOME' TO searchpoints-sp_name.
APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
ELSE.
EXIT.
ENDIF.
WHEN OTHERS.
EXIT.
ENDCASE.
ENDFORM. " WRITE_DB_HOME
FORM get_directories.
* get the name and aliases of ALL userdefined directories
SELECT * FROM user_dir INTO isearchpoints
WHERE svrname = sy-uname.
MOVE isearchpoints-dirname to searchpoints-dirname.
MOVE isearchpoints-aliass to searchpoints-sp_name.
APPEND searchpoints.
ENDSELECT.
SELECT * FROM user_dir INTO isearchpoints
WHERE svrname = 'all'.
MOVE isearchpoints-dirname to searchpoints-dirname.
MOVE isearchpoints-aliass to searchpoints-sp_name.
APPEND searchpoints.
ENDSELECT.
* Get DB home
IF sy-dbsys(3) = 'ADA'.
PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ATRA'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ATRA' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_BINARY'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_BINARY' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory $DIR_CCMS
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CCMS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CCMS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_LOGGING'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_LOGGING' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_RUN'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_RUN' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DATA'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DATA' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'DB6'.
PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DBMS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DBMS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXECUTABLE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXECUTABLE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXE_ROOT'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXE_ROOT' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN_ROOT'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN_ROOT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GLOBAL'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GLOBAL' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_EXE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_EXE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_LIB'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_LIB' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_HOME'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_HOME' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'INF'.
PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTALL'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTALL' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTANCE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTANCE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LIBRARY'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LIBRARY' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LOGGING'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LOGGING' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the files written by the memory inspector
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_MEMORY_INSPECTOR'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_MEMORY_INSPECTOR' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'ORA'.
PERFORM write_db_home.
ENDIF.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PAGING'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PAGING' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PUT'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PUT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PERF'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PERF' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROFILE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROFILE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROTOKOLLS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROTOKOLLS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_REORG'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_REORG' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ROLL'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ROLL' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_RSYN'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_RSYN' TO searchpoints-sp_name.
APPEND searchpoints.
* calculate directory for saphostagent (no sapparam available...)
IF ( sy-opsys(3) = 'WIN' ) OR ( sy-opsys(3) = 'Win' ).
DATA: windir_path(64), programfiles_path(64).
* hoping that ProgramFiles is set in service user environment
CALL 'C_GETENV' ID 'NAME' FIELD 'ProgramFiles'
ID 'VALUE' FIELD programfiles_path.
IF programfiles_path IS INITIAL.
* %ProgramFiles% not available. guess from windir
CALL 'C_GETENV' ID 'NAME' FIELD 'windir'
ID 'VALUE' FIELD windir_path.
* e.g. S:\WINDOWS ==> S:\Program Files
CONCATENATE windir_path(3) 'Program Files' INTO programfiles_path.
ENDIF.
CONCATENATE programfiles_path '\SAP\hostctrl'
INTO searchpoints-dirname.
ELSE.
* on UNIX, the path is hard coded
searchpoints-dirname = '/usr/sap/hostctrl'.
ENDIF.
MOVE: 'DIR_SAPHOSTAGENT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SAPUSERS'
ID 'VALUE' FIELD searchpoints-dirname.
IF searchpoints-dirname = '.'.
IF sy-opsys = 'Windows NT'.
searchpoints-dirname = '.\'.
ELSE.
searchpoints-dirname = './'.
ENDIF.
ENDIF.
MOVE: 'DIR_SAPUSERS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SETUPS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SETUPS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SORTTMP'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SORTTMP' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SOURCE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SOURCE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TEMP'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TEMP' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRANS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRANS' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRFILES'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRFILES' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRSUB'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRSUB' TO searchpoints-sp_name.
APPEND searchpoints.
* get the name of the current server.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'rdisp/myname'
ID 'VALUE' FIELD searchpoints-dirname.
data: h_ind type i.
LOOP AT searchpoints.
h_ind = sy-tabix.
IF searchpoints-sp_name IS INITIAL.
DELETE searchpoints INDEX h_ind.
ENDIF.
ENDLOOP.
ENDFORM. -
How to read the data from Excel file and Store in XML file using java
Hi All,
I got a problem with Excel file.
My problem is how to read the data from Excel file and Store in XML file using java excel api.
For getting the data from Excel file what are all the steps i need to follow to get the correct result.
Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
Thanks & Regards,
Sreenu,
[email protected],
india,If you want someone to do your work, please have the courtesy to provide payment.
http://www.rentacoder.com -
How to Load the data from excel file(Extension is .CSV) into the temp.table
Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
SachinHello Sachin,
You can use the following metalink note:How to Read Data from an EXCEL Spreadsheet into a Form Using Webutil Client_OLE2 (Doc ID 813535.1) and modify it a little bit.
Instead of copy values into forms you can save them in your temporary table.
Kind regards,
Alex
If someone's helpful or correct please mark it accordingly. -
How to load the data from .csv file to oracle table???
Hi,
I am using oracle 10g , plsql developer. Can anyone help me in how to load the data from .csv file to oracle table. The table is already created with the required columns. The .csv file is having about 10lakh records. Is it possible to load 10lakh records. can any one please tell me how to proceed.
Thanks in advance981145 wrote:
Can you tell more about sql * loader??? how to know that utility is available for me or not??? I am using oracle 10g database and plsql developer???SQL*Loader is part of the Oracle client. If you have a developer installation you should normally have it on your client.
the command is
sqlldrType it and see if you have it installed.
Have a look also at the FAQ link posted by Marwin.
There are plenty of examples also on the web.
Regards.
Al -
How to load the data from excel file into temprory table in Forms 11g?
Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
SachinDeclare
v_full_filename varchar2(500);
v_server_path varchar2(2000);
v_separator VARCHAR2(1);
v_filename VARCHAR2(400);
filename VARCHAR2 (100);
v_stop_load varchar2 (2000);
v_rec_error_log varchar2(4000);
v_error_log varchar2(4000);
ctr NUMBER (12);
cols NUMBER (2);
btn number;
RES BOOLEAN;
application ole2.obj_type;
workbooks ole2.obj_type;
workbook ole2.obj_type;
worksheets ole2.obj_type;
worksheet ole2.obj_type;
cell ole2.obj_type;
cellType ole2.OBJ_TYPE;
args ole2.obj_type;
PROCEDURE olearg
IS
args ole2.obj_type;
BEGIN
args := ole2.create_arglist;
ole2.add_arg (args, ctr);
ole2.add_arg (args, cols);
cell := ole2.get_obj_property (worksheet, 'Cells', args);
ole2.destroy_arglist (args);
END;
BEGIN
v_full_filename := client_get_file_name(directory_name => null
,file_name => null
,file_filter => 'Excel files (*.xls)|*.xls|'
||'Excel files (*.xlsx)|*.xlsx|'
,message => 'Choose Excel file'
,dialog_type => null
,select_file => null
If v_full_filename is not null Then
v_separator := WEBUTIL_CLIENTINFO.Get_file_Separator ;
v_filename := v_separator||v_full_filename ;
:LOAD_FILE_NAME := substr(v_filename,instr(v_filename,v_separator,-1) + 1);
RES := Webutil_File_Transfer.Client_To_AS(v_full_filename,"server_path"||substr(v_filename,instr(v_filename,v_separator,-1) + 1));
--Begin load data from EXCEL
BEGIN
filename := v_server_path||substr(v_filename,instr(v_filename,v_separator,-1) + 1); -- to pick the file
application := ole2.create_obj ('Excel.Application');
ole2.set_property (application, 'Visible', 'false');
workbooks := ole2.get_obj_property (application, 'Workbooks');
args := ole2.create_arglist;
ole2.add_arg (args, filename); -- file path and name
workbook := ole2.get_obj_property(workbooks,'Open',args);
ole2.destroy_arglist (args);
args := ole2.create_arglist;
ole2.add_arg (args, 'Sheet1');
worksheet := ole2.get_obj_property (workbook, 'Worksheets', args);
ole2.destroy_arglist (args);
ctr := 2; --row number
cols := 1; -- column number
go_block('xxx');
FIRST_RECORD;
LOOP
--Column 1 VALUE --------------------------------------------------------------------
olearg;
v_stop_load := ole2.get_char_property (cell, 'Text'); --cell value of the argument
:item1 := v_stop_load;
cols := cols + 1;
--Column 2 VALUE --------------------------------------------------------------------
olearg;
:item2 := ole2.get_char_property (cell, 'Text'); --cell value of the argument
cols := cols + 1;
--<and so on>
ole2.invoke (application, 'Quit');
ole2.RELEASE_OBJ (cell);
ole2.RELEASE_OBJ (worksheet);
ole2.RELEASE_OBJ (worksheets);
ole2.RELEASE_OBJ (workbook);
ole2.RELEASE_OBJ (workbooks);
ole2.RELEASE_OBJ (application);
END;
--End load data from EXCELPlease mark it as answered if you helped.
Maybe you are looking for
-
How can I set a name for a unknown place without moving it?
I imported some photos with GPS information into iPhoto. I can see these photos on the map with one pin per photo, but every pin is tagged with "unknown place". All the photographs were taken on the same island, so I want to add the name of this Isla
-
Partial delivery error message
Hi I have a Requirement. If i define the Partial delivery allowed and Max partial delivery allowed is "2" . I have Created a delivery document and saved. also i have created 2nd delivery document and saved. Till this step it is fine. Now when iam cr
-
Hi, I am new to the FAH concept. As for now it seems its just same as SLA. we have done some basic setups as mentioned in oracle white paper. Now before create accounting we have to populate some tables like 'XLA_EVENTS' and 'XLA_TRANSACTION_ENTITIES
-
The Products are "Training Courses"
How to use BC E Commerce Products/Catalogs to sell Training Courses as the products. Problem trying to configure the courses dates. Need some kind of live calendar logic solution that shows if a particular course is FULL or available to purchase on a
-
Chart in BW Query / Workbook
Hi. I need to build a Bex workbook with charts in BW 7.0. I know how to build a workbook in the new release with query (very different from past release but very similar to WAD), but I don't know how to posta chart in a sheet. Can You please help me