How to extract an employee reporting hierarchy per org unit in spreadsheet

Hi Guys,
Can any one advise if there's a standard report I can use to see employee's  reporting hierachy in spreadsheetformat ?
Report must have per org unit positions with their  related positions :'reports to' A002  relationship between two positions in a specific org unit and person's name/employee number occuping the positions.
I tried creating joint table but battling to undestand how I can have the two related positions info in the infoset.
Current standard report give me only positions with reports to relationship but haven't found report showing me positions with reports to relationship and their related position.

Have you tried using logical database PCH? That gives flexibility to create this kind of report. Create an infoset in SQ02 and an Adhoc Query in SQ01 based on PCH Logical Database. You will need the relationship subtype 'A002' and related object type 'P' on selection screen.
Edited by: Shafiq Rehman on Feb 6, 2008 4:23 PM

Similar Messages

  • How to Extract the Freq List, Cycles per Freq and Samples per Cycles of sweep waveform

    How to Extract the Freq List, Cycles per Freq and Samples per Cycles of sweep waveform
    I want to extract the freqency distribution, cycles per freqency, and samples per cylce of swept waveform, in order to output the same of swept waveform with I have acquired by NI DAQ card, tks!
    owen wan
    Attachments:
    Untitled 1.vi ‏2333 KB

    Look inside the palette called Signal Processing - Waveform measurements.  There are a lot of functions here that you can use to get the information you desire.  For instance, the Extract Tones function will output an array of clusters, with each cluster element giving the frequency, amplitude, and phase of the signal component.  Go through the entire arry to see each frequency component of the complex waveform.
    Also, in the Waveforms palette there is the Get Waveform Components function that will give you t0, dt, and Y components of the waveform.  1/dt should give you the sample rate.  See attached VI.
    - tbob
    Inventor of the WORM Global
    Attachments:
    WfmInfo.vi ‏4658 KB

  • How to Extract data and reports from the SAP BW warehouse

    Hi to All Guru's
    I am new to SAP BW. Can any one help me to know, How to Extract data and reports from SAP BW. Do we use any tools.  After Extracting the data from SAP BW how can we move all the data to Cognos.  It would be kind enough to provide me with any documentation or links.  Step by step procedure would be very much helpfull to me.
    Thanks
    Venu

    Hi Voodi
    Thanks for the quick response. I think Open hub is to extract the data from SAP BW, but what about sending this data into Cognos.  Can you please let me know in detail regarding answer. If possible send me any documentation or links regarding this.  Thanks for your concern.
    Venu

  • Employee works for 4 org units and want to distribute the cost to 4 cost ce

    Hi Experts,
    I am in the implementation phase, requirement gathering.
    I have scenerio where, Employee works for 4 org units and want to distribute the cost to 4 different cost centers.
    so that I can be able to find the exact cost occured for each Org unit.
    Please let me know how to map this in SAP?
    P oints will be rewarded fully
    Kindly dont post if you are not sure of your solution friends.
    Thanks
    Jay

    Hello,
    Infotype 0027 is the standard solution for multiple reporting / multi tasking in SAP.
    but also check which org unit he will be primarily assigned.
    Regards

  • One organizational unit reports to two org unit

    Hi All,
    I am new in HR, please help me to achieve the following:
    We required that one organizational unit reports to two org unit .
    How can we achieve that??
    Thanks,
    Anumit

    Hi,
    In SAP there is one-to-one relationship maintained in the system. In your case you want one org unit should report to 2 Org units, which is not possible as per my knowledge.
    The relation betwn thm will be A-002 (Reports to), also if you try to maintain the same for both the Org units then it will ask to delete one of the relationship in the system.
    Regards,
    Prasad

  • Org unit reporting to multiple Org units

    Hi,
         We have set the A002 relationship as time constraint 002 and the B002 is set up as time constriant 3 but we are still able assign the org unit to report to multiple org units. Can you please let me know how to fix this issue.
    Thanks
    Vick

    Hi,
    Change the reporting relationshipp time constraint as 1
    Regards,
    Nitin

  • Moving The Chief Including Direct Reports to Another Org Unit

    Dear Expertise,
    We have a request to move the manager including his direct reports employees to a different org unit.
    I'm looking for a way to achieve this through function module.
    Can anyone shred some light or if any Standard FM available to reuse?
    Your Sincerely,
    SE

    Hi,
    certainly I do not believe there is any standard code for doing this.
    Are you trying to code up an application that lets you do this? If so, the have a look at the decoupled infotype framework classes (CL_HRBAS_* ) for maintaining OM infotypes - you could use these to delimit the old relationships and create new ones in the target org unit.
    In particular have a look at class - CL_HRBAS_PLAIN_INFOTYPE_ACCESS.
    if you're just looking for an easy way to do it - lots of dragging and dropping in PPOME would probably be the easiest!
    hope that helps,
    Chris

  • One Org unit reports to 2 org.units

    We required that one organizational unit reports to two org unit .
    How can we achieve that??
    Thanks,

    Hi,
    I don't think we could give 50 for the priority because the data is overlapped if the start date and end date between two objects are same. For Relationship A002 Reports (line) to, we couldn't fill the weighting percentage too. I think you can use another another relationship A/B 262 Reports to. Is it exactly reports to two org. units or there is a priority reporting and additional reporting? If both are priority reporting, I think you can use matrix organization.

  • % distribution of all the employees in a particular org unit

    Hello To all,
    I am working in Objective Setting and Assessments, I am having a one reporting requirment where I need to show % distribution of all the employees in a particular org unit. I kept 0ORGUNIT in row and Keyfigure 1ROWCOUNT in column,
    I have created a formula for % distribution of all the employees -> %GT " No. fo Records"
    I am bit confused that weather i should take %GT or %CT, %RT
    Wt is difference between that formulas.
    Kindly suggest
    Thanks
    Shalini

    Hi Shalini,
    %CT gives the share of the result, for example in a Regios if you have 10 employees then for each row it gives the employee share for that Region.
    %GT gives the share of the result from the Grand Total, for example if you have 10 regions then it caluculates each row it gives the employee share from all the Regions Grand Total.
    %RT gives the share from the Report Result for each employee.
    In your case you need to use the %GT, then for each region result area it gives % of distribution of all the employees.
    Hope this helps.
    Veerendra.

  • Need to get employees belonging to this org unit + its lower level org Unit

    Hi ,
        We have a requirment where in which we need to get all the employees belongs to a perticular in an     
        organization UNIT and its lower level org units.IS tehr any FM to find the same.
       i.e if we input org unit then it should return all the employees belonging to this org unit + its lower level 
        org unit(B002 relation ship)
       Any inputs are appreciated..
    Regards,
    Zareena.

    Hi Zareena,
    This is wht i understood in org management...
    evaluation path is the relation between two entities,
    entities may be
    job(C)
    position(S)
    Employee(P)
    Org Unit(O)
    O - O is line mangaer,
    S - O belongs to,
    P - S is owner of.
    i think if u observe O - O is line manger.. means in with same position
    S - O means that position belongs to the Org Unit
    P - S means the employee has that Position.
    All these type of relations will me maintained in the Infotype 1001 with the raltionships.
    All object types will be maintained in the Infotype 1000.
    Regards,
    Sreenivasulu Nallani.
    Award points if helpful..

  • Employee resposnsibles Org unit Determination  (Employee is assigned to Org Unit)

    Hi ,
    We want to determine Org unit based on employee responsible but not on basis of USER.
    Employee responsible will be assigned to a particular position in Organization .
    We want to determine Organization unit where Employee is assigned .
    When in transaction Partner Function employee responsible is selected then Organization unit to which employee is assigned should get determined.
    When employee resposnsible is changed Org unit (Service ) should change .
    Please suggest solution.
    Thanks & Regards,
    Anup Reche

    Hi
    first u need to do the filter settings in object BUPA_MAIN to stop the employee replication to R3.
    When u create the no. ranges in r3 u can remove the filter so that the process will continue.
    Regards
    Manohar

  • How to view employees of "only a specific employee-group" from an org unit

    Dear All,
    I am working with authorization for  MSS , now there is following requirement ,
    There are 2 cheif positions in one orgunit , say as cheif-1 and cheif-2 , cheif-1 can view all employees exist in his organization unit ,including cheif-2 . But cheif-2 can see all those employees who belong to employee group non-management and reports to cheif -2  only.
    We have tried to restrict the chief 2 to view employee group of non-mgmt in object p_orgin but still he is able to view all employees of org unit in mss. Kindly let us know it is possible to strict chief-2 to view non-mgmt employees .. & how ?
    Kindly let me know the solution , as it is an urgent .
    Regards
    Sadia Kamal
    Edited by: Sadia Kamal on Oct 14, 2011 3:32 PM

    Dear  All,
    i used the structural authorization everything was working fine but cheif1 can view all his employees as well as cheif 2 ' employees but he can not view chief2 . any suggestion please let me know .
    Regards
    Sadia Kamal
    Edited by: Sadia Kamal on Oct 16, 2011 11:10 AM

  • Report to the employee list under an org unit for a specific PSA

    Hello Experts,
    Is there any standard report to see the list of employees belonging to a particular sub org unit under a particular personnel sub area?
    For eg: There is a company X, and it has got 3 plants in blore, mumbai and chennai.
    Blore , chennai amd mumbai represent the personnel sub area for the company X.
    to see the list of employees working under operational sub org unit , under the org unit of company X in blore, is there any standard report in SAP??
    Helpful answers will be awarded
    thanks and regards,
    Pooja Dev

    Hi Pooja,
    Use Report RPLMIT00.
    Choose Org structure on it.
    Let me know.
    Arti

  • BP - Employee relationships to an org unit and changes

    Dear Colleagues of CRM,
    The scenario pertains to an employee and its relationship to an org unit to which it is assigned. Once an employee is assigned to an org unit, a relationship too gets created with the Employee as BP. This relationship has the contact info that was available in the BP master data at that point of time.
    Later on, if the employee is transferred and hence assigned to another org unit, the assignment in the org unit is changed to the new org unit. On the new org unit assignment, a new relationship gets created with the BP. However, the earlier relationship doesn't get deleted when the earlier assignment to the org unit was deleted. If I attempt to delete the relationship in the BP, it doesn't allow and prompts to u201Cu2026.Change through the HR mastersu201D.  The HR master though has nothing of the contact details vis-à-vis this relationship.
    The existence of this initial relationship is causing error in all my dependent programs / activities which pick up the contact details of this employee and hence trigger emails etc.
    Request solution as to how do I remove this u2018oldu2019 and irrelevant relationship from the BP. It may be noted that the subsequent changes of assignment u2013 deletions in particular u2013 are deleting the relationship too but the initial one exists all throughout.
    Seek your kind advise to resolve the matter .
    Regards,
    Tariq

    Contact SAP they have given two custom reports to check and repair BUT050 entries when we have similar issue.
    Regards,
    Rajesh.

  • Webi report publication with org unit personalization mapping

    Hi everyone,
    I have an HR Webi report whose source is a Bex query and is scheduled (published) weekly. The report is meant for managers so in the dynamic recipient report (another webi report) I have manager's name, email and org unit. Right now the bex query does not restrict by organizational unit, the filtering by unit is done in webi through the 0employee's org unit attribute. This works, each manager only sees data of her own employees.
    However, managers would like to see not only their direct people (employees belonging to her own org unit) but also submanagers, ie, managers of subordinate org units. I tried filtering through the org unit of 0ORGUNIT, not the employee's o.unit attribute, but that doesn't work. The same manager shows up multiple times in the report.
    Has anyone managed to publish a webi report (or Crystal if that's possible) that shows the chief hat's subhierarchy?
    thanks

    Hi Graham,
    The publication should work in the same way for a user or a group.
    Can you please elaborate on u201Cassigning a user to the groupu201D, I believe this is probably where you go wrong. 
    Please test same workflow I suggested yesterady, but instead of user, use the group:
    1. create the profile
    2. add the group to the profile
    3. assign the profile value to the group for that profile
    4. add the group to the publication as Recipient
    Does it work or not?  If so, then do as follow for the user and group:
    1. create the profile
    2. Add user and group to the profile
    3. assign the profile value to the user and group for that profile
    4. add the user and group to the publication as Recipient
    Please note that in the above steps, you donu2019t have to assign the user to the group.
    Regards,
    Jeff

Maybe you are looking for