How to extract cost centres from tcode ME23n.

Hi, i have a issue here regarding the extraction of cost centres from tcode me23n. I need to extract the cost centres from line item account assignment. I know I need to use ekpo-packno and esll-subpackno and then use esll-packno and i am stuck. So which is the next table? I managed to know eskn store the cost centres. Am i right? 
Thanks & Regards!
Andy

Hi Andy ,
check EKKN for costcentres.
regards
prabhu

Similar Messages

  • How to get G/L account and cost centres from ECC to SRM...

    Dear All,
    How to get G/L account and cost centres from ECC to SRM...
    Please let me know the steps...
    Thanks
    Ravi

    Hi
    GL account - You can define in SPRO- Cross application settings--Account assignment ->Define GL account for product category and account assignment category.
    or you can use BADI BBP_DETERMINE_ACCT.
    In Organisation Strucute - You can Map the backend cost center via KNT  cost center attribute .
    Regards
    Muthu

  • How to provide Cost Centre  in Shipment cost automatically

    I need to pass the values at Cost Centre field, based on the various company codes, while performing the SHIPMENT COST.
    Scenario is as follows:
    Each line item is assigned to a charge head ( i.e. GL account) but this needs CO object, at this point, we need to insert the CO object based on certain logic:  (Manual input is not being accepted by the client) some form automation is required.
    Could anybody please advise me, how this is possible - by advising the details of BADI / USER EXIT / Substitution.

    if u use cost centre from om side than it shd show in organisgment assignment
    check with the integration is properly done or not
    ploig orga shd be x
    plogi plogi shd be 1

  • How to extract Inventory data from SAP R/3  system

    Hi friends How to extract Inventory data from SAP R/3  system? What are report we may expect from the Inventory?

    Hi,
    Inventory management
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
    How to Handle Inventory Management Scenarios in BW (NW2004)
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    Loading of Cube
    •• ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
    http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
    Non-Cumulative Values / Stock Handling
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
    Non-Cumulatives
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
    Here you will find all the Inventory Management BI Contents:
    http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
    2LIS_03_BX- Initial Stock/Material stock
    2LIS_03_BF - Material movements
    2LIS_03_UM - Revaluations/Find the price of the stock
    The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
    detailed level (material, plant, storage location and so on). At this moment, the opening
    stock is the operative stock in the source system. "At this moment" is the point in time at
    which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
    documents are to be posted during this run and so the stock does not change during this
    run, as we will see below). It is not possible to choose a key date freely.
    The second DataSource (2LIS_03_BF) is used to extract the material movements into
    the BW system. This DataSource provides the data as material documents (MCMSEG
    structure).
    The third of the above DataSources (2LIS_03_UM) contains data from valuated
    revaluations in Financial Accounting (document BSEG). This data is required to update
    valuated stock changes for the calculated stock balance in the BW. This information is
    not required in many situations as it is often only the quantities that are of importance.
    This DataSource only describes financial accounting processes, not logistical ones. In
    other words, only the stock value is changed here, no changes are made to the
    quantities. Everything that is subsequently mentioned here about the upload sequence
    and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
    This means a detailed description is not required for the revaluation DataSource.
    http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
    http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
    These are the standard data sources used for Inventory extraction.
    Hope this helps.
    Thanks,
    JituK

  • How to extract PS data from sap r/3 to bw

    Hi,
    How to extract PS data from sap r/3 to bw
    PS data like plans,budget,accurals&commitmnets
    can any one help me regarding this..
    Thanks in Advance,
    Shankar.

    HI sankar,
    you can refer the belkow link to find the details on the relevant extractors and infoproviders
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/17/416d030524064cb2b8d58ffb306f3a/frameset.htm
    Regards,
    Sathya

  • How to Extract the data from R/3 Genric extractor to BW ?

    How to Extract the data from R/3 Genric extractor to BW ?

    hi,
    step by step procedure for generic extraction delta
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    Refer:
    /people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
    http://help.sap.com/saphelp_nw04/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    Generic Extraction via Function Module
    /people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
    Extractions in BI
    https://www.sdn.sap.com/irj/sdn/wiki
    New to Materials Management / Warehouse Management?
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1b439590-0201-0010-ea8e-cba686f21f06
    Ramesh

  • How to extract specific line from a string

    Hi guys.
    I?m starting to work with java...
    i have the following data inside a string variable:
    0 rows inserted.
    0 rows updated.
    0 rows ignored.
    98 rows marked as deleted.
    0 rows have no country.
    3345 rows have no geo.
    0 rows are invalid.
    what i want to do i to extract the number of rows marked as delete.
    I think that i figured out how to extract the number from this line :"98 rows marked as deleted."
    but how do i get to that line?
    I hope you can Help me. Thanks.

    the string is the result from a Function... this function gets the info from a store procedure...
                   rta = "Results for " + dh.getSource() + " source:\n" +
    dh.getInsertedCount() + " rows inserted.\n" +
    dh.getUpdatedCount() + " rows updated.\n" +
    dh.getIgnoredCount() + " rows ignored.\n" +
                   dh.getDeletedCount() + " rows marked as deleted.\n" +
                   dh.getNoCtryCnt() + " rows have no country.\n" +
                   dh.getNoGeoCnt() + " rows have no geo.\n" +
                   dh.getInvalidCnt() + " rows are invalid.\n";
    i can?t change this function...
    so i need to work with the returned value...
    i what thinking to use the following method to extract te number...
    private int GetNumericValue(string sVal)
    int iFirst, iCharVal, iEnd;
    int iMult = 1, iRet = 0;
    char[] aNumbers = "1234567890".ToCharArray();
    iFirst = sVal.IndexOfAny(aNumbers);
    iEnd = sVal.LastIndexOfAny(aNumbers);
    if (iEnd < 0)
    return 0;
    string subStr = sVal.Substring(iFirst, iEnd - iFirst + 1);
    iEnd = subStr.Length - 1;
    while (subStr.Length > 0)
    iCharVal = int.Parse(subStr[subStr.Length-1].ToString());
    iRet += iMult * iCharVal;
    iMult *= 10;
    if (iEnd <= 0)
    break;
    subStr = subStr.Substring(0, subStr.Length - 1);
    iEnd = subStr.LastIndexOfAny(aNumbers);
    subStr = sVal.Substring(iFirst, iEnd + 1);
    return iRet;
    but i still need the 4rd line to extract the number

  • How to extract rpt file from .b1px file in SAP B1

    How to extract rpt file from .b1px file in SAP B1

    Hi Trupti,
    You will not be able to export .b1px file without importing in SAP B1.
    Please import .b1px file in SAP B1 and then export .rpt file from SAP B1 one by one.
    Hope this helps
    Regards::::
    Atul Chakraborty

  • How to extract  DB  FILE  FROM NONSAP  SYSTEM  IN BI-7

    how to extract  DB  FILE  FROM NONSAP  SYSTEM  IN BI-7

    hi,
    chk the links for extraction using DB
    Extraction using DB connect
    http://help.sap.com/saphelp_nw70/helpdata/EN/58/54f9c1562d104c9465dabd816f3f24/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c6/0ffb40af87ee6fe10000000a1550b0/frameset.htm
    Extract data from oracle DB to SAP BI 7.0
    Ramesh

  • How to extract single file from multipart zip archives?

    Hello,
    I have a 10 parts of zip files that contains single file. When I extracted these, each program taking an action seperatly to each parts and gave me 10 files in a different folders. In a Windows, it is so simple. Winzip,winrar automaticaly discovering that are the parts of a single file and give me that.
    My question is simple: How to extract single file from a multipart zip/rar archives ?
    I know a way in "Terminal" but it is not comfortable for big parts.

    I tried with UnArchiver but it extracted each file seperately like showen in a photo

  • How  to Extract sales document from r/3 ?

    hi,
          How to extract sales data from SAP R/3 considering all fields of data in different tables?
    Thanks & regards,
    Gopi.

    Hi Gopi,
    It depends what data you need to extract but most of the data would be available in following tables :
    Sales
    VBAK - Header
    VBAP - Item
    VBPA - Sales Document Partner
    Shipment
    VTTK - Shipment Header
    VTTP - Shipment Item
    Delivery
    LIKP - Delivery Header
    LIPS - Delivery item
    Customer
    KNA1 - Customer Master
    KNB1 - Customer Master (Company Code)
    Cheers,
    Vikram
    Pls reward for helpful replies!!

  • How to get costing BOM from R/3

    Hi friends,
    How to get costing BOM from r/3 with levels into bw.and the transaction in r/3 is ck13n

    Hi,
    You'll need to go in for a generic DS in this case.
    Cheers,
    Kedar

  • How to extract audit log from R/3 into BW

    Hi, I have a request that how to extract audit log from r/3 into bw?
    Is there any datasource or infocube  I can use?

    HI ,
    Identify your Audit Log table and create generic data source for the same using rso2. 
    Regards
    BVR

  • How to extract channels names from PhotoShop-written TIFFs?

    Hi,
    Does anybody know how to extract channel names from PhotoShop-written TIFFs? (I'm really asking about spot color channel names, as basic channel names, such as "Red," "Green," "Blue" or "Cyan," "Magenta," "Yellow," and "Black" can obviously be derived from the color space tag.)
    There's some XMP data in those TIFFs, but manual inspection does not seem to reveal channel names. So, this may not be an XMP question, after all. There's also a larger (for metadata) data block associated with a private (Adobe) tag, which could contain the information. It's binary, though, and I wouldn't know how to crack it open.
    The data must be present somewhere in the file, as PhotoShop will show the channel names on re-open of the TIFF.
    There's a TIFF/IT TIFFTAG_INKNAMES tag, which PhotoShop doesn't utilize.
    Any pointers greatly appreciated.
    Thanks,
    Oliver

    Solution is to speak to Adobe directly and receive confidential info.

  • How to assign cost centre with position

    Hi Guys
    How to assign cost centre with a position?
    thanks

    Hi,
    Go to PPOM_OLD t code & select ur organisational unit.
    Then click on staff assignments & the GOTO in menu bar,click on Accounts assignment.
    Put cursor on the position & lick on master cost center icon & assign the cost center.
    Cheers
    Ramesh

Maybe you are looking for