How to extract data from a remote system

Hi,
I want to extract data from another system and map it with a target table in my local machine. what is the procedure to do that?
I tried to create another module specifying location of that remote system I could extract the table but when I am mapping with the target table I am getting this error
ORA-04052: error occurred when looking up remote object [email protected]@ORACLE_LOCATION_UBN_15
ORA-00604: error occurred at recursive SQL level 1
ORA-01017: invalid username/password; logon denied
ORA-02063: preceding line from UBNDW@ORACLE_LOCATION_UBN_15
here ORACLE_LOCATION_UBN_15 is the location and UBNDW is the SID for that system
SCOTT is the username I have provided while creating the module
Please help me out with this..
Thanks

Hi Roberto,
thank you for the fast answer. I have read this before but i don't understand the needed steps on the Oracle-System.
Hope anyone can help me...
Thanks
Muammer
Message was edited by:
        Muammer Kizilaslan

Similar Messages

  • Error while extracting data from a remote system

    Hi,
    I am facing problem while extracting data from a remote system. The connection is alright I can extract the table required from the remote system,but when I deploy it I get this error
    ORA-04052: error occurred when looking up remote object [email protected]@ORACLE_UBN_15_LOCATION1
    ORA-00604: error occurred at recursive SQL level 1
    ORA-28000: the account is locked
    ORA-02063: preceding line from UBNDW@ORACLE_UBN_15_LOCATION1
    here Scott.demo1 is the table and UBNDW is the sid of the remote system and ORACLE_UBN_15_LOCATION1 is the location. Please help me out with this
    Thanks

    Hi,
    IDOC's need to be processed manually either in OLTp or in BW depending on the failure. Error msg in monitor status will take u to either BW or OLTP whernever there is a prob. Process IDOC's , this will start the left over packets and will finish the load.
    we hav to check IDOC in WE05(t-code) and know the status these are WE51,WE52,WE53 AND GOTO WE19 there we hav to execute the exist Idoc will succesfully loaded Idoc
    Goto St22 see the short dump error msg..
    post if there any inf..
    Thanks,
    Shreya

  • How to extract data from ODS to non-SAP system

    Hi,
    Can anybody tell me, step by step, how to extract data from ODS to a non-SAP system?
    Is it possible to do it without programming effort? And is there volume limits for this kind of extraction?
    The non-SAP system is an unix system.
    Thanks in advance
    Ella

    Ella,
    You can look at it from the concept of a BADI / Infospoke
    Extract the data from the ODS to a Flat file / RDBMS using an infospoke. I am not sure as to how the infospoke loads data into the RDBMS ( did it very long ago ) but then you can push it into an RDBMS and I am sure it will be system neutral.
    Hope this helps...
    Arun
    Assign points if it helps

  • How to extract data from custom made Idoc that is not sent

    Hi experts,
    Could you please advise if there is a way how to extract data from custom made idoc (it collects a lot of data from different SAP tables)? Please note that this idoc is not sent as target system is not fully maintained.
    As by now, we would like to verify - what data is extracted now.
    Any help, would be appreciated!

    Hi,
    The fields that are given for each segment have their length given in EDSAPPL table. How you have to map is explained in below example.
    Suppose for segment1, EDSAPPL has 3 fields so below are entries
    SEGMENT          FIELDNAME           LENGTH
    SEGMENT1         FIELD1                   4
    SEGMENT1         FIELD2                   2
    SEGMENT1         FIELD3                   2
    Data in EDID4 would be as follows
    IDOC           SEGMENT                          APPLICATION DATA
    12345         SEGMENT1                        XYZ R Y
    When you are extracting data from these tables into your internal table, mapping has to be as follows:
    FIELD1 = APPLICATIONDATA+0(4)        to read first 4 characters of this field, because the first 4 characters in this field would belong to FIELD1
    Similarly,
    FIELD2 = APPLICATIONDATA+4(2).
    FIELD3 = APPLICATIONDATA+6(2).  
    FIELD1 would have XYZ, FIELD2 = R, FIELD3 = Y
    This would remain true in all cases. So all you need to do is identify which fields you want to extract, and simply code as above to extract the data from this table.
    Hope this was helpful in explaining how to derive the data.

  • JDBC-XI-FILE scenario. How to extract data from more than one table in JDBC

    Hi,
    I was asked a question like in JDBC-XI-FILE scenario........ How to extract data from more than one tables (i.e from JDBC system) ?? What is the logic to do the same ??
    I am not sure whether this is a valid question..........but any help in this regards is highly appreciated.
    Regards
    Kumar

    HI,
    Yes it can be possible ,please see the following links
    JDBC  Receiver with Oracle Stored Procedures
    configuring jdbc adapter with multiple tables
    RFC -> XI -> JDBC Scenario Updating Multiple Tables
    /people/alessandro.berta/blog/2005/10/04/save-time-with-generalized-jdbc-datatypes
    JDBC Adapter multiple Selects
    https://www.sdn.sap.com/irj/sdn/advancedsearch?query=jdbc%20with%20multiple%20tables&cat=sdn_all
    Regards
    Chilla..

  • How to Extract data from Oracle DB to BW via DBConncet interface.

    HI All,
    Do you know how to extract data from ORACLE data base to BW, using DBConnect.
    Here we are not using R/3 Business content structures.
    How to do it in both source system  and BW side?
    How to define structures on both sides.
    Please provide any documents on that.
    Thanks in Advance.
    Sri.

    Hi Srilaxmi
    Have a look at these links
    http://help.sap.com/saphelp_nw04/helpdata/en/58/54f9c1562d104c9465dabd816f3f24/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/a1/89786c3df35c4ea930a994e884bb4c/content.htm
    http://help.sap.com/saphelp_bw30b/helpdata/en/80/1a618ae07211d2acb80000e829fbfe/content.htm
    and  this thread
    Extract from Oracle View with DB connect
    regards
    KR

  • How to extract data from BW cube

    Hello friends,
    Kindly advice me how to extract data from BW cube.
    My requirement is to write an ABAP program to retrive the data from the BW cube.
    Kindly provide me any sample code for my requirement.
    Thanks in advance.
    S.Jaffer Ali

    Hi Jaffer,
    If you want to load the data from the BW cube into any other Cube/ODS in the same of another BW system you can use the export datasource.
    If you want to load the data from the BW cube into any other system then you can use any of these options:
    1. Infospoke - Open hub service and is widely used.
    2. APD
    3. RFC enabled fn modules.
    Bye
    Dinesh

  • How to extract data from SAP in FDM 11121

    I came across some documents from version 11113, says there is a SAP adapter, however ,when I check 11121 there's no such adapter, does anyone know how to extract data from SAP in FDM 11121?

    I download a package from Bristlecone, but I dont see any xml files in it, just a bunch of dll and I didn't find any instructions on how to set up/configure in FDM, it just explained how to register in SAP app server and client.
    Hyperion 11113 has readme on sap adapter(Hyperion Readme Template), but I cannot find the same readme file in 11121, all I can find is ERP Integration Adapter document. any idears where I can find at least a readme document?

  • How to extract data from web URL

    I was doing one project which need to extract data from web pages and then analyze these data. the question is how to extract data from there, using html parser? need help, thanks a lot

    I was doing one project which need to extract data
    from web pages and then analyze these data. the
    question is how to extract data from there, using
    html parser? need help, thanks a lotTry this:
    http://java.sun.com/docs/books/tutorial/networking/urls/readingURL.html
    Or, like you said yourself, use an HTML parser:
    http://java-source.net/open-source/html-parsers

  • How to extract data from Chart History?

    Dear all, I have read a lot of posts, but still don't understand how to extract data from Chart history.
    Suppose you acquired 1024 points of data every time, then use "build array" to build an array, then send to intensity chart to show, then save the history into a .txt file,  but how to extact data from the file?
    How Labview store the data in the 2D history buffer?
    Anybody has any examples?

    The simplest would be to save the 2D array as a spreadsheet file, the read it back the same way.
    Maybe the attached simple example can give you some ideas (LabVIEW 7.1). Just run it. At any time, press "write to file". At any later time, you can read the save data into the second history chart.
    If you are worried about performance, it might be better to use binary files, but it will be a little more complicated. See how far you get.
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    IntensityChartHistorySave.vi ‏79 KB

  • How to extract data from planning book

    nu t apo. need help regarding how to extract data from planning book givn the planning book name , view name & some key figures.
    Total Demand (Key Figure DMDTO):
    o     Forecast
    o     Sales Order
    o     Distribution Demand (Planned)
    o     Distribution Demand (Confirmed)
    o     Distribution Demand (TLB-Confirmed)
    o     Dependent Demand
    Total Receipts (Key Figure RECTO):
    o     Distribution Receipt (Planned)
    o     Distribution Receipt (Confirmed)
    o     Distribution Receipt (TLB-Confirmed)
    o     In-Transit
    o     Production (Planned)
    o     Production (Confirmed)
    o     Manufacture of Co-Products
    Stock on Hand (Key Figure STOCK):
    o     Stock on Hand (Excluding Blocked stock)
    o     Stock on Hand (Including Blocked stock)
    In-Transit Inventory (Cross-company stock transfers)
    Work-in-progress (Planned orders / Process orders with start date in one period and finish date in another period)
    Production (Planned), Production (Confirmed) and Distribution Receipt elements need to be converted based on Goods Receipt date for projected inventory calculation.

    Hello Debadrita,
    Function Module BAPI_PBSRVAPS_GETDETAIL2 or BAPI_PBSRVAPS_GETDETAIL can help you.
    For BAPI BAPI_PBSRVAPS_GETDETAIL, the parameters are:
    1) PLANNINGBOOK - the name of your planning book
    2) DATA_VIEW - name of your data view
    3) KEY_FIGURE_SELECTION - list of key figures you want to read
    4)  SELECTION - selection parameters which describe the attributes of the data you want to read (e.g. the category or brand). This is basically a list of characteristics and characteristic values.
    BAPI_PBSRVAPS_GETDETAIL2 is very similar to BAPI_PBSRVAPS_GETDETAI but is only available from SCM 4.1 onwards.
    For the complete list of parameters, you can go to transaction SE37, enter the function module names above and check out the documentation.
    Please post again if you have questions.
    Hope this helps.

  • How to extract data from oracle database directly in to bi7.0 (net weaver)

    how to extract data from oracle database directly in to bi7.0 (net weaver)? is it something do with EDI? can anybody explain me in detail?
    Thanks
    York

    You can use UDConnect to get from Oracle database in to BW
    <b>Data Transfer with UD Connect -</b>
    http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/content.htm
    <b>Prerequisites</b>
    You have installed the SAP WAS J2EE Engine with BI Java components.  You can find more information on this in the SAP BW installation guide on the SAP Service Marketplace at service.sap.com/instguides.
    Hope it Helps
    Chetan
    @CP..

  • How to extract data from info cube into an internal table using ABAP code

    HI
    Can Anyone plz suggest me
    How to extract data from info cube into an internal table using ABAP code like BAPI's or function modules.
    Thankx in advance
    regds
    AJAY

    HI Dinesh,
    Thankq for ur reply
    but i ahve already tried to use the function module.
    When I try to Use the function module RSDRI_INFOPOV_READ
    I get an information message "ERROR GENERATION TEST FRAME".
    can U plz tell me what could be the problem
    Bye
    AJAY

  • How to extract data from Essbase to Flat File using ODI

    Hi,
    Anyone know how to extract data from Essbase to Flat File using ODI?
    Thanks in advance.
    Regards,
    Sumardi

    Hi,
    Have you read through :-
    Oracle Data Integrator Adapter for Hyperion Essbase Getting Started - http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/odiess_getting_started.pdf
    Oracle Data Integrator Adapter for Hyperion Essbase User's Guide - http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/odiess_users.pdf
    If you have read them and are still have a problem at what stage are you having the issues?
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How to extract data from XML file with JavaScript

    HI All
    I am new to this group.
    Can anybody help me regarding XML.
    I want to know How to extract data from XML file with JavaScript.
    And also how to use API for XML
    regards
    Nagaraju

    This is a Java forum.
    JavaScript is something entirely different than Java, even though the names are similar.
    Try another website with forums about JavaScript.
    For example here: http://www.webdeveloper.com/forum/forumdisplay.php?s=&forumid=3

Maybe you are looking for

  • Insert called before delete in a collection with unique constraint

    Hi all, I have a simple @OneToMany private mapping: private Collection<Item> items; @OneToMany(mappedBy = "parent", cascade = CascadeType.ALL) public Collection<Item> getItems() { return items; public void setItems(Collection<Item> items) { this.item

  • XL Reporter - Prompting for Production Order Number - How to?

    I have watched the FlashBook's for creating reprots, and following the directions. When I go to create a new Paramater, the Document Number is not an available Dimension. Can anyone point me in the right direction in setting up an XL Reporter report

  • No apps under Purchases section?

    Hi! I bought Mountain Lion last week. Today I would like to download it to my secondary worksation (a MacBook Pro). When I signed in the App Store, go to the Purchases tab, it said "you have not yet purchased any apps." Why? How can I get back my pur

  • Physical pc and virtual pc

    Hi I have a win 7 pc in a domain, i virtualized it, and used it normally on the domain, but after some time, when i booted the physical pc it couldn't logon to the domain, can someone tell me why? How can i have both running? do i need to register th

  • HT4623 Hi, I do have the first iPad, however had little use of it. I had extended guarranty that ended end of 2012

    Hi, I bought the first iPad, complete, with extended guaranty and internet connection. Services ended in october 2010. Actually I never used the iPad or internet connection. Had a health treatment ( I used to forget what i did few minutes before) tod