How to extract data from a structure?

I want to get the data KWERT from structure KOMV.
is there a way to do this? thanks..

Hello,
U can't get data from the structure.
Find out the dataelement of the field KWERT and search for where used list.It will list number of tables from which u can find out the table from which can fetch the data of the field KWERT.
Don't forget to award points.#
Regards,
Vasanth

Similar Messages

How to extract data from a structure?(Data Dictionary)

Hi all,
       This is regarding extracting data from a structure.
For Eg:if we want to extract data from a structure ADDR1_DATA,How will we do that in report programming?Structures on its own has no existence unless it s attached to a database table or view.when am using 'Where used List' on that structure also I am not getting any database tables or views.What can I do about this?
Thanking you,
anjaly

HI Anjaly,
as you said structure does not have any value .. unless something is added to it..
So just use the structure to define the type of the sttructure you want..
Or to include it in your itab like..
data : Begin of itab occurs 0.
       include structure ADDR1_DATA.
data i type i.
       end of itab.
you cannot directly extract data from the structure ADDR1_DATA..
regards
satesh

Error Extracting data from a STRUCTURE in SELECT statement

Hi,
I have an SAP defined structure BIW_KNA1_S which has been enhanced with 2 fields (ZZS1 and ZZS2). I need to populate these 2 fields with data from the 2 SORT fields from ADRC table.
I tried the following code but i do not get any output. This piece of code is in a FORM statement from which i should return contents of table ITAB in the foll. code.
DATA ZS TYPE TABLE OF ADRC WITH HEADER LINE.
DATA ITAB LIKE TABLE OF BIW_KNA1_S WITH HEADER LINE.
FIELD-SYMBOLS: <FS> LIKE ITAB.
SELECT SORT1 SORT2 FROM ADRC INTO CORRESPONDING FIELDS OF TABLE
ZS WHERE ADDRNUMBER IS NOT NULL.
LOOP AT ITAB ASSIGNING <FS>.
IF ZS-ADDRNUMBER IS NOT INITIAL.
<FS>-ZZS1 = ZS-SORT1.
<FS>-ZZS2 = ZS-SORT2.
ENDIF.
ENDLOOP.
Since i did not get any output, I then added the foll. line of code before the LOOP statement.
SELECT * FROM BIW_KNA1_S INTO CORRESPONDING FIELDS OF TABLE ITAB
WHERE KUNNR IS NOT NULL.
When i execute this, i get the foll. error.
"BIW_KNA1_S is not defined in the ABAP dictionary as table, projection view or database view."
How to extract data from a structure BIW_KNA1_S using a SELECT statement.
Could someone help.
Thanks

Hi Roberto,
Ok. Let me explain my requirement more clearly. I don't want to write the code in include ZXRSAU02. In ZXRSAU02, i will have only PERFORM statement which will call the FORM statement depending on the name of the program.
Ex: PERFORM form_name ...tables i_t_data.
In this way, i don't need to make any changes in this file. I will only need to make the changes in the report where my Actual FORM code resides. In the ABAP report, i will have my FORM code which will return contents.
And this is the code which my FORM report will consist:
DATA ZS TYPE TABLE OF ADRC WITH HEADER LINE.
DATA ITAB LIKE BIW_KNA1_S OCCURS 10 WITH HEADER LINE.
FIELD-SYMBOLS: <FS> LIKE ITAB.
SELECT SORT1 SORT2 FROM ADRC INTO CORRESPONDING FIELDS OF TABLE ZS WHERE ADDRNUMBER IS NOT NULL.
LOOP AT ITAB ASSIGNING <FS>.
IF ZS-ADDRNUMBER IS NOT INITIAL.
<FS>-ZZS1 = ZS-SORT1.
<FS>-ZZS2 = ZS-SORT2.
ENDIF.
ENDLOOP.
But as you said, i will have some problems i suppose. Like if my ADRC has some 70 records and if there are 100 records in BIW_KNA1_S, then when i try to copy the fields from ADRC into ITAB (BIW_KNA1_S) i might have problems. I will get back to you once i clarify these things.
Thanks for your reply.

Extracting data from a Structure in R/3.

Hi,
This is in continuation to one of my previous questions.
I found that for a standard report "S_ALR_87012347" for FI GL in R/3, the values are taken from a structure "FAGL_S_RFBPET00_LIST2".
I have used 0FIGL_O02 DSO and 0FI_GL_3 Datasource. The problem is I do not get proper values for G/L Account where the account type is either K (Vendor) or D (Customer). Instead of showing the Vendor/Customer Number here the report shows the G/L account number which is quite obvious. But if we see in the R/3 report (mentioned above), the account number field shows the Vendor/Customer Number if the Account Type is either K or D.
My question is: can I directly extract data from the Structure FAGL_S_RFBPET00_LIST2?
If yes, then how...???
Thanks...!

Structure does not contains any data. You have to write code (Function module) to populate the data for structure fields.

CALL function to extract data from a structure table

Hi Gurus,
Anyone knows how to write a call function to extract data from a structure table?
Your help is very much appreciated.
Thanks alot.

Hi,
structure doesnot hold any data. instead of it you can check the stucture in which table it is used, find the table name,use select query to extract the data u needed.
you can use where used list option to find the structure in which table it is used.
regards
siva

How to Extract data from Oracle DB to BW via DBConncet interface.

HI All,
Do you know how to extract data from ORACLE data base to BW, using DBConnect.
Here we are not using R/3 Business content structures.
How to do it in both source system and BW side?
How to define structures on both sides.
Please provide any documents on that.
Thanks in Advance.
Sri.

Hi Srilaxmi
Have a look at these links
http://help.sap.com/saphelp_nw04/helpdata/en/58/54f9c1562d104c9465dabd816f3f24/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/a1/89786c3df35c4ea930a994e884bb4c/content.htm
http://help.sap.com/saphelp_bw30b/helpdata/en/80/1a618ae07211d2acb80000e829fbfe/content.htm
and this thread
Extract from Oracle View with DB connect
regards
KR

How to extract data from SAP in FDM 11121

I came across some documents from version 11113, says there is a SAP adapter, however ,when I check 11121 there's no such adapter, does anyone know how to extract data from SAP in FDM 11121?

I download a package from Bristlecone, but I dont see any xml files in it, just a bunch of dll and I didn't find any instructions on how to set up/configure in FDM, it just explained how to register in SAP app server and client.
Hyperion 11113 has readme on sap adapter(Hyperion Readme Template), but I cannot find the same readme file in 11121, all I can find is ERP Integration Adapter document. any idears where I can find at least a readme document?

How to extract data from web URL

I was doing one project which need to extract data from web pages and then analyze these data. the question is how to extract data from there, using html parser? need help, thanks a lot

I was doing one project which need to extract data
from web pages and then analyze these data. the
question is how to extract data from there, using
html parser? need help, thanks a lotTry this:
http://java.sun.com/docs/books/tutorial/networking/urls/readingURL.html
Or, like you said yourself, use an HTML parser:
http://java-source.net/open-source/html-parsers

How to extract data from Chart History?

Dear all, I have read a lot of posts, but still don't understand how to extract data from Chart history.
Suppose you acquired 1024 points of data every time, then use "build array" to build an array, then send to intensity chart to show, then save the history into a .txt file, but how to extact data from the file?
How Labview store the data in the 2D history buffer?
Anybody has any examples?

The simplest would be to save the 2D array as a spreadsheet file, the read it back the same way.
Maybe the attached simple example can give you some ideas (LabVIEW 7.1). Just run it. At any time, press "write to file". At any later time, you can read the save data into the second history chart.
If you are worried about performance, it might be better to use binary files, but it will be a little more complicated. See how far you get.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
IntensityChartHistorySave.vi ‏79 KB

How to extract data from planning book

nu t apo. need help regarding how to extract data from planning book givn the planning book name , view name & some key figures.
Total Demand (Key Figure DMDTO):
o     Forecast
o     Sales Order
o     Distribution Demand (Planned)
o     Distribution Demand (Confirmed)
o     Distribution Demand (TLB-Confirmed)
o     Dependent Demand
Total Receipts (Key Figure RECTO):
o     Distribution Receipt (Planned)
o     Distribution Receipt (Confirmed)
o     Distribution Receipt (TLB-Confirmed)
o     In-Transit
o     Production (Planned)
o     Production (Confirmed)
o     Manufacture of Co-Products
Stock on Hand (Key Figure STOCK):
o     Stock on Hand (Excluding Blocked stock)
o     Stock on Hand (Including Blocked stock)
In-Transit Inventory (Cross-company stock transfers)
Work-in-progress (Planned orders / Process orders with start date in one period and finish date in another period)
Production (Planned), Production (Confirmed) and Distribution Receipt elements need to be converted based on Goods Receipt date for projected inventory calculation.

Hello Debadrita,
Function Module BAPI_PBSRVAPS_GETDETAIL2 or BAPI_PBSRVAPS_GETDETAIL can help you.
For BAPI BAPI_PBSRVAPS_GETDETAIL, the parameters are:
1) PLANNINGBOOK - the name of your planning book
2) DATA_VIEW - name of your data view
3) KEY_FIGURE_SELECTION - list of key figures you want to read
4) SELECTION - selection parameters which describe the attributes of the data you want to read (e.g. the category or brand). This is basically a list of characteristics and characteristic values.
BAPI_PBSRVAPS_GETDETAIL2 is very similar to BAPI_PBSRVAPS_GETDETAI but is only available from SCM 4.1 onwards.
For the complete list of parameters, you can go to transaction SE37, enter the function module names above and check out the documentation.
Please post again if you have questions.
Hope this helps.

How to extract data from ODS to non-SAP system

Hi,
Can anybody tell me, step by step, how to extract data from ODS to a non-SAP system?
Is it possible to do it without programming effort? And is there volume limits for this kind of extraction?
The non-SAP system is an unix system.
Thanks in advance
Ella

Ella,
You can look at it from the concept of a BADI / Infospoke
Extract the data from the ODS to a Flat file / RDBMS using an infospoke. I am not sure as to how the infospoke loads data into the RDBMS ( did it very long ago ) but then you can push it into an RDBMS and I am sure it will be system neutral.
Hope this helps...
Arun
Assign points if it helps

How to extract data from custom made Idoc that is not sent

Hi experts,
Could you please advise if there is a way how to extract data from custom made idoc (it collects a lot of data from different SAP tables)? Please note that this idoc is not sent as target system is not fully maintained.
As by now, we would like to verify - what data is extracted now.
Any help, would be appreciated!

Hi,
The fields that are given for each segment have their length given in EDSAPPL table. How you have to map is explained in below example.
Suppose for segment1, EDSAPPL has 3 fields so below are entries
SEGMENT          FIELDNAME           LENGTH
SEGMENT1         FIELD1                   4
SEGMENT1         FIELD2                   2
SEGMENT1         FIELD3                   2
Data in EDID4 would be as follows
IDOC           SEGMENT                          APPLICATION DATA
12345         SEGMENT1                        XYZ R Y
When you are extracting data from these tables into your internal table, mapping has to be as follows:
FIELD1 = APPLICATIONDATA+0(4)        to read first 4 characters of this field, because the first 4 characters in this field would belong to FIELD1
Similarly,
FIELD2 = APPLICATIONDATA+4(2).
FIELD3 = APPLICATIONDATA+6(2).
FIELD1 would have XYZ, FIELD2 = R, FIELD3 = Y
This would remain true in all cases. So all you need to do is identify which fields you want to extract, and simply code as above to extract the data from this table.
Hope this was helpful in explaining how to derive the data.

How to extract data from oracle database directly in to bi7.0 (net weaver)

how to extract data from oracle database directly in to bi7.0 (net weaver)? is it something do with EDI? can anybody explain me in detail?
Thanks
York

You can use UDConnect to get from Oracle database in to BW
<b>Data Transfer with UD Connect -</b>
http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/content.htm
<b>Prerequisites</b>
You have installed the SAP WAS J2EE Engine with BI Java components. You can find more information on this in the SAP BW installation guide on the SAP Service Marketplace at service.sap.com/instguides.
Hope it Helps
Chetan
@CP..

JDBC-XI-FILE scenario. How to extract data from more than one table in JDBC

Hi,
I was asked a question like in JDBC-XI-FILE scenario........ How to extract data from more than one tables (i.e from JDBC system) ?? What is the logic to do the same ??
I am not sure whether this is a valid question..........but any help in this regards is highly appreciated.
Regards
Kumar

HI,
Yes it can be possible ,please see the following links
JDBC Receiver with Oracle Stored Procedures
configuring jdbc adapter with multiple tables
RFC -> XI -> JDBC Scenario Updating Multiple Tables
/people/alessandro.berta/blog/2005/10/04/save-time-with-generalized-jdbc-datatypes
JDBC Adapter multiple Selects
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=jdbc%20with%20multiple%20tables&cat=sdn_all
Regards
Chilla..

How to extract data from info cube into an internal table using ABAP code

HI
Can Anyone plz suggest me
How to extract data from info cube into an internal table using ABAP code like BAPI's or function modules.
Thankx in advance
regds
AJAY

HI Dinesh,
Thankq for ur reply
but i ahve already tried to use the function module.
When I try to Use the function module RSDRI_INFOPOV_READ
I get an information message "ERROR GENERATION TEST FRAME".
can U plz tell me what could be the problem
Bye
AJAY

How to extract data from a structure?

Similar Messages

Maybe you are looking for