How to extract data from cluster of component levels?

I use harmonic analyzer function to read out the component levels cluster, which cotain data for channel 0 and 1
 but have problem reading out the fundamental component for each channel ( array element 1). Pleas help.
Thanks
Solved!
Go to Solution.
Attachments:
extract comonent levels cluster.doc ‏33 KB

Uhhh....  you marked your reply as the accepted solution.  Give yourself a cigar!!!!
Instead of using index, wire the array of clusters to a For Loop.  Set indexing enabled on the input terminal.  Then you can build an array of all the elements if you wish to handle it that way.  You can get an output array for each element in the cluster.  Not sure if this is desirable to you, just a thought.
Message Edited by tbob on 04-20-2010 03:46 PM
- tbob
Inventor of the WORM Global

Similar Messages

  • How to Extract data from Cluster table  and transperant table

    Hello BW Experts ,
    I want to extract the data from cluster table BSEG and a transperant table BKPF .
    The primary fields are BELNR , GJHAR and BUKRS.
    the fields of table BKPF to extarct is BUDAT and fields of BSEG table is HKONT , BSCHL , ZUONR and POSID.
    I can not create a view over these two tables as BSEG is a Cluster table.
    Please guide me.
    Regadrs ,
    Amol.

    hi Amol,
    take a look Sigg's weblog
    /people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
    you can use RSAX_BIW_GET_DATA_SIMPLE as sample, there specified import parameters
    FUNCTION RSAX_BIW_GET_DATA_SIMPLE.
    ""Lokale Schnittstelle:
    *" IMPORTING
    *" VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
    *" VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
    *" VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
    *" VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
    *" VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
    *" TABLES
    *" I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
    *" I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
    *" E_T_DATA STRUCTURE SFLIGHT OPTIONAL
    *" EXCEPTIONS
    *" NO_MORE_DATA
    *" ERROR_PASSED_TO_MESS_HANDLER

  • How to extract data from cluster table

    Hi, experts,
    Here I want to extract change documents, which is from tables CDHDR(header) and CDPOS(line items). The problem is that CDPOS is a cluster table so that I can't create a view to develop a generic data source.
    I have search on the forum and some one said generic data source based on function module was a choice, but I think coding FM is so complex, especially including delta implementation.
    Could any one give me some advice? or give me some coding samples?
    Thanks a lot!

    Dear Sam,
    I would suggest you to have a look at the function module CHANGEDOCUMENT_READ u2013 you can use this function module as a core in the developed function module for generic extractor. Unfortunately, the suggested function module can not handle import parameters for field names, so the strategy which can be applied here is to use this function module to fill the internal table based on restrictions on object class and table name and then go through filled internal table and delete records which are not relevant for fields KOFIZ or ABRSPERR.
    As for delta implementation, would you please advise if delta relevant field based on timestamp generated on date and time of the change document is sufficient for your needs? If so then you can use fields UDATE and UTIME to generate timestamp on them including the field containing generated timestamp to the extract table. Next step here is to choose this field as delta relevant field in the Generic DataSource maintenance (TCode RSO2).
    Please inform me if this solution suits you or if you have any questions or concerns regarding it.
    My best regards,
    Vadim

  • How to extract data from SAP in FDM 11121

    I came across some documents from version 11113, says there is a SAP adapter, however ,when I check 11121 there's no such adapter, does anyone know how to extract data from SAP in FDM 11121?

    I download a package from Bristlecone, but I dont see any xml files in it, just a bunch of dll and I didn't find any instructions on how to set up/configure in FDM, it just explained how to register in SAP app server and client.
    Hyperion 11113 has readme on sap adapter(Hyperion Readme Template), but I cannot find the same readme file in 11121, all I can find is ERP Integration Adapter document. any idears where I can find at least a readme document?

  • How to extract data from web URL

    I was doing one project which need to extract data from web pages and then analyze these data. the question is how to extract data from there, using html parser? need help, thanks a lot

    I was doing one project which need to extract data
    from web pages and then analyze these data. the
    question is how to extract data from there, using
    html parser? need help, thanks a lotTry this:
    http://java.sun.com/docs/books/tutorial/networking/urls/readingURL.html
    Or, like you said yourself, use an HTML parser:
    http://java-source.net/open-source/html-parsers

  • How to extract data from Chart History?

    Dear all, I have read a lot of posts, but still don't understand how to extract data from Chart history.
    Suppose you acquired 1024 points of data every time, then use "build array" to build an array, then send to intensity chart to show, then save the history into a .txt file,  but how to extact data from the file?
    How Labview store the data in the 2D history buffer?
    Anybody has any examples?

    The simplest would be to save the 2D array as a spreadsheet file, the read it back the same way.
    Maybe the attached simple example can give you some ideas (LabVIEW 7.1). Just run it. At any time, press "write to file". At any later time, you can read the save data into the second history chart.
    If you are worried about performance, it might be better to use binary files, but it will be a little more complicated. See how far you get.
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    IntensityChartHistorySave.vi ‏79 KB

  • How to extract data from planning book

    nu t apo. need help regarding how to extract data from planning book givn the planning book name , view name & some key figures.
    Total Demand (Key Figure DMDTO):
    o     Forecast
    o     Sales Order
    o     Distribution Demand (Planned)
    o     Distribution Demand (Confirmed)
    o     Distribution Demand (TLB-Confirmed)
    o     Dependent Demand
    Total Receipts (Key Figure RECTO):
    o     Distribution Receipt (Planned)
    o     Distribution Receipt (Confirmed)
    o     Distribution Receipt (TLB-Confirmed)
    o     In-Transit
    o     Production (Planned)
    o     Production (Confirmed)
    o     Manufacture of Co-Products
    Stock on Hand (Key Figure STOCK):
    o     Stock on Hand (Excluding Blocked stock)
    o     Stock on Hand (Including Blocked stock)
    In-Transit Inventory (Cross-company stock transfers)
    Work-in-progress (Planned orders / Process orders with start date in one period and finish date in another period)
    Production (Planned), Production (Confirmed) and Distribution Receipt elements need to be converted based on Goods Receipt date for projected inventory calculation.

    Hello Debadrita,
    Function Module BAPI_PBSRVAPS_GETDETAIL2 or BAPI_PBSRVAPS_GETDETAIL can help you.
    For BAPI BAPI_PBSRVAPS_GETDETAIL, the parameters are:
    1) PLANNINGBOOK - the name of your planning book
    2) DATA_VIEW - name of your data view
    3) KEY_FIGURE_SELECTION - list of key figures you want to read
    4)  SELECTION - selection parameters which describe the attributes of the data you want to read (e.g. the category or brand). This is basically a list of characteristics and characteristic values.
    BAPI_PBSRVAPS_GETDETAIL2 is very similar to BAPI_PBSRVAPS_GETDETAI but is only available from SCM 4.1 onwards.
    For the complete list of parameters, you can go to transaction SE37, enter the function module names above and check out the documentation.
    Please post again if you have questions.
    Hope this helps.

  • How to extract data from ODS to non-SAP system

    Hi,
    Can anybody tell me, step by step, how to extract data from ODS to a non-SAP system?
    Is it possible to do it without programming effort? And is there volume limits for this kind of extraction?
    The non-SAP system is an unix system.
    Thanks in advance
    Ella

    Ella,
    You can look at it from the concept of a BADI / Infospoke
    Extract the data from the ODS to a Flat file / RDBMS using an infospoke. I am not sure as to how the infospoke loads data into the RDBMS ( did it very long ago ) but then you can push it into an RDBMS and I am sure it will be system neutral.
    Hope this helps...
    Arun
    Assign points if it helps

  • How to extract data from custom made Idoc that is not sent

    Hi experts,
    Could you please advise if there is a way how to extract data from custom made idoc (it collects a lot of data from different SAP tables)? Please note that this idoc is not sent as target system is not fully maintained.
    As by now, we would like to verify - what data is extracted now.
    Any help, would be appreciated!

    Hi,
    The fields that are given for each segment have their length given in EDSAPPL table. How you have to map is explained in below example.
    Suppose for segment1, EDSAPPL has 3 fields so below are entries
    SEGMENT          FIELDNAME           LENGTH
    SEGMENT1         FIELD1                   4
    SEGMENT1         FIELD2                   2
    SEGMENT1         FIELD3                   2
    Data in EDID4 would be as follows
    IDOC           SEGMENT                          APPLICATION DATA
    12345         SEGMENT1                        XYZ R Y
    When you are extracting data from these tables into your internal table, mapping has to be as follows:
    FIELD1 = APPLICATIONDATA+0(4)        to read first 4 characters of this field, because the first 4 characters in this field would belong to FIELD1
    Similarly,
    FIELD2 = APPLICATIONDATA+4(2).
    FIELD3 = APPLICATIONDATA+6(2).  
    FIELD1 would have XYZ, FIELD2 = R, FIELD3 = Y
    This would remain true in all cases. So all you need to do is identify which fields you want to extract, and simply code as above to extract the data from this table.
    Hope this was helpful in explaining how to derive the data.

  • How to extract data from oracle database directly in to bi7.0 (net weaver)

    how to extract data from oracle database directly in to bi7.0 (net weaver)? is it something do with EDI? can anybody explain me in detail?
    Thanks
    York

    You can use UDConnect to get from Oracle database in to BW
    <b>Data Transfer with UD Connect -</b>
    http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/content.htm
    <b>Prerequisites</b>
    You have installed the SAP WAS J2EE Engine with BI Java components.  You can find more information on this in the SAP BW installation guide on the SAP Service Marketplace at service.sap.com/instguides.
    Hope it Helps
    Chetan
    @CP..

  • JDBC-XI-FILE scenario. How to extract data from more than one table in JDBC

    Hi,
    I was asked a question like in JDBC-XI-FILE scenario........ How to extract data from more than one tables (i.e from JDBC system) ?? What is the logic to do the same ??
    I am not sure whether this is a valid question..........but any help in this regards is highly appreciated.
    Regards
    Kumar

    HI,
    Yes it can be possible ,please see the following links
    JDBC  Receiver with Oracle Stored Procedures
    configuring jdbc adapter with multiple tables
    RFC -> XI -> JDBC Scenario Updating Multiple Tables
    /people/alessandro.berta/blog/2005/10/04/save-time-with-generalized-jdbc-datatypes
    JDBC Adapter multiple Selects
    https://www.sdn.sap.com/irj/sdn/advancedsearch?query=jdbc%20with%20multiple%20tables&cat=sdn_all
    Regards
    Chilla..

  • How to extract data from info cube into an internal table using ABAP code

    HI
    Can Anyone plz suggest me
    How to extract data from info cube into an internal table using ABAP code like BAPI's or function modules.
    Thankx in advance
    regds
    AJAY

    HI Dinesh,
    Thankq for ur reply
    but i ahve already tried to use the function module.
    When I try to Use the function module RSDRI_INFOPOV_READ
    I get an information message "ERROR GENERATION TEST FRAME".
    can U plz tell me what could be the problem
    Bye
    AJAY

  • How to extract data from Essbase to Flat File using ODI

    Hi,
    Anyone know how to extract data from Essbase to Flat File using ODI?
    Thanks in advance.
    Regards,
    Sumardi

    Hi,
    Have you read through :-
    Oracle Data Integrator Adapter for Hyperion Essbase Getting Started - http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/odiess_getting_started.pdf
    Oracle Data Integrator Adapter for Hyperion Essbase User's Guide - http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/odiess_users.pdf
    If you have read them and are still have a problem at what stage are you having the issues?
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How to extract data from XML file with JavaScript

    HI All
    I am new to this group.
    Can anybody help me regarding XML.
    I want to know How to extract data from XML file with JavaScript.
    And also how to use API for XML
    regards
    Nagaraju

    This is a Java forum.
    JavaScript is something entirely different than Java, even though the names are similar.
    Try another website with forums about JavaScript.
    For example here: http://www.webdeveloper.com/forum/forumdisplay.php?s=&forumid=3

  • How to extract data from SAP 4.7 and upload data to SAP ECC 6.0

    Hi,
        How to extract data from SAP 4.7 and upload data to SAP ECC 6.0? Can i use BDC,BAPI,LSMW? Help me please.

    hi
    good
    both works not possible simultaneously.
    If you want to do it in two separate task than you can use the GUI_UPLOAD function module to fulfill your requirement.
    thanks
    mrutyun^

Maybe you are looking for

  • Text to speech missing in adobe captivate 7

    Text to speech  and closed caption button missing in adobe captivate 7. Please see below. May I know what happen?

  • Problems with nls_language

    Hi, people! When I change the NLS_LANGUAGE registry key from US7ASCII to WE8ISO8859P1 Discoverer shows 2 folders with the same name, (one is uppercase and the other is lowercase). The folders' contents are different from each other. Any ideas? Thank

  • Project structure built dynamically?

    Hey, This is something I frequently wonder about when taking over someone elses work. I've got an existing structure for a project - a bunch of classes all in different folders matching their class definitions. What would be nice is if Flash behaved

  • Virtual Interface IP address

    Hi, In all Cisco documentation 1.1.1.1 is always specified as Virtual Interface IP address. Here is my concern. When wireless client gets an IP address (through DHCP), 1.1.1.1 is entered as DHCP server which means that at 50% lease time client will a

  • Heuristic Run  - Fail

    Dear All,                Working on SCM 5.0 Whenever i change/load  the T- Lanes , next Day the first Heuristic Run Fails. After Changing the T-Lane , i do the following, 1. Consistency Check - Planning Areas. 2. Consistency check - Live Cache 3. Low