How to extract data from ODS to non-SAP system

Hi,
Can anybody tell me, step by step, how to extract data from ODS to a non-SAP system?
Is it possible to do it without programming effort? And is there volume limits for this kind of extraction?
The non-SAP system is an unix system.
Thanks in advance
Ella

Ella,
You can look at it from the concept of a BADI / Infospoke
Extract the data from the ODS to a Flat file / RDBMS using an infospoke. I am not sure as to how the infospoke loads data into the RDBMS ( did it very long ago ) but then you can push it into an RDBMS and I am sure it will be system neutral.
Hope this helps...
Arun
Assign points if it helps

Similar Messages

  • How to bring data from Oracle based Non SAP System to SAP

    Dear Friends,
    I have two servers, one is SAP and the other one is Non SAP with Oracle in backend. Please suggest how to take data from the NonSAP server to SAP server or how to connect the two.
    Please send the step-by-step configuration if possible.
    Thanks in advance,
    Alok.

    Hi
    Step 1: Create an entry for the External database in DBCON table using Trxn: DBCA.
    Table: DBCON (Description of Database Connections)
    Field Name     Description                          Value (For: E.g.:)
    CON_NAME   Logical name for a database connection    RAJ
    DBMS       Database system                           MSS
    USER_NAME  Database user                            <username>
    PASSWORD   Password for setting up the connection   <pwd>/<pwd>
    CON_ENV   Database-specific information             MSSQL_SERVER=depotserver MSSQL_DBNAME=HOF_INDORE
    DB_RECO
    Step 2: Now you can write code to connect to the external database…
    Your Sample code can be something like this……
    FUNCTION-POOL z_houston. "MESSAGE-ID ..
    DATA: BEGIN OF wa,
    c_locid(3),
    c_locname(50),
    c_locstate(5),
    END OF wa.
    FUNCTION z_houston_connect.
    ""Local interface:
    EXEC SQL.
    CONNECT TO 'RAJ' AS 'V'
    ENDEXEC.
    EXEC SQL.
    SET CONNECTION 'V'
    ENDEXEC.
    *- Get the data from MS-SQL Server
    EXEC SQL.
    open C1 for
    select
    loc_id,
    loc_name,
    loc_state
    from ho_loc_mast
    ENDEXEC.
    DO.
    EXEC SQL.
    FETCH NEXT C1 into :wa-c_locid, :wa-c_locname, :wa-c_locstate
    ENDEXEC.
    IF sy-subrc = 0.
    PERFORM loop_output.
    ELSE.
    EXIT.
    ENDIF.
    ENDDO.
    EXEC SQL.
    CLOSE C1
    ENDEXEC.
    ENDFUNCTION.
    *& Form LOOP_OUTPUT
    Output
    FORM loop_output .
    WRITE: /5 wa-c_locid, 10 wa-c_locname, 65 wa-c_locstate.
    CLEAR wa.
    ENDFORM. " LOOP_OUTPUT
    Regards
    Raj

  • How to extract data from BW cube

    Hello friends,
    Kindly advice me how to extract data from BW cube.
    My requirement is to write an ABAP program to retrive the data from the BW cube.
    Kindly provide me any sample code for my requirement.
    Thanks in advance.
    S.Jaffer Ali

    Hi Jaffer,
    If you want to load the data from the BW cube into any other Cube/ODS in the same of another BW system you can use the export datasource.
    If you want to load the data from the BW cube into any other system then you can use any of these options:
    1. Infospoke - Open hub service and is widely used.
    2. APD
    3. RFC enabled fn modules.
    Bye
    Dinesh

  • How to extract data from SAP in FDM 11121

    I came across some documents from version 11113, says there is a SAP adapter, however ,when I check 11121 there's no such adapter, does anyone know how to extract data from SAP in FDM 11121?

    I download a package from Bristlecone, but I dont see any xml files in it, just a bunch of dll and I didn't find any instructions on how to set up/configure in FDM, it just explained how to register in SAP app server and client.
    Hyperion 11113 has readme on sap adapter(Hyperion Readme Template), but I cannot find the same readme file in 11121, all I can find is ERP Integration Adapter document. any idears where I can find at least a readme document?

  • How to extract data from web URL

    I was doing one project which need to extract data from web pages and then analyze these data. the question is how to extract data from there, using html parser? need help, thanks a lot

    I was doing one project which need to extract data
    from web pages and then analyze these data. the
    question is how to extract data from there, using
    html parser? need help, thanks a lotTry this:
    http://java.sun.com/docs/books/tutorial/networking/urls/readingURL.html
    Or, like you said yourself, use an HTML parser:
    http://java-source.net/open-source/html-parsers

  • How to extract data from Chart History?

    Dear all, I have read a lot of posts, but still don't understand how to extract data from Chart history.
    Suppose you acquired 1024 points of data every time, then use "build array" to build an array, then send to intensity chart to show, then save the history into a .txt file,  but how to extact data from the file?
    How Labview store the data in the 2D history buffer?
    Anybody has any examples?

    The simplest would be to save the 2D array as a spreadsheet file, the read it back the same way.
    Maybe the attached simple example can give you some ideas (LabVIEW 7.1). Just run it. At any time, press "write to file". At any later time, you can read the save data into the second history chart.
    If you are worried about performance, it might be better to use binary files, but it will be a little more complicated. See how far you get.
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    IntensityChartHistorySave.vi ‏79 KB

  • How to extract data from planning book

    nu t apo. need help regarding how to extract data from planning book givn the planning book name , view name & some key figures.
    Total Demand (Key Figure DMDTO):
    o     Forecast
    o     Sales Order
    o     Distribution Demand (Planned)
    o     Distribution Demand (Confirmed)
    o     Distribution Demand (TLB-Confirmed)
    o     Dependent Demand
    Total Receipts (Key Figure RECTO):
    o     Distribution Receipt (Planned)
    o     Distribution Receipt (Confirmed)
    o     Distribution Receipt (TLB-Confirmed)
    o     In-Transit
    o     Production (Planned)
    o     Production (Confirmed)
    o     Manufacture of Co-Products
    Stock on Hand (Key Figure STOCK):
    o     Stock on Hand (Excluding Blocked stock)
    o     Stock on Hand (Including Blocked stock)
    In-Transit Inventory (Cross-company stock transfers)
    Work-in-progress (Planned orders / Process orders with start date in one period and finish date in another period)
    Production (Planned), Production (Confirmed) and Distribution Receipt elements need to be converted based on Goods Receipt date for projected inventory calculation.

    Hello Debadrita,
    Function Module BAPI_PBSRVAPS_GETDETAIL2 or BAPI_PBSRVAPS_GETDETAIL can help you.
    For BAPI BAPI_PBSRVAPS_GETDETAIL, the parameters are:
    1) PLANNINGBOOK - the name of your planning book
    2) DATA_VIEW - name of your data view
    3) KEY_FIGURE_SELECTION - list of key figures you want to read
    4)  SELECTION - selection parameters which describe the attributes of the data you want to read (e.g. the category or brand). This is basically a list of characteristics and characteristic values.
    BAPI_PBSRVAPS_GETDETAIL2 is very similar to BAPI_PBSRVAPS_GETDETAI but is only available from SCM 4.1 onwards.
    For the complete list of parameters, you can go to transaction SE37, enter the function module names above and check out the documentation.
    Please post again if you have questions.
    Hope this helps.

  • How to extract data from custom made Idoc that is not sent

    Hi experts,
    Could you please advise if there is a way how to extract data from custom made idoc (it collects a lot of data from different SAP tables)? Please note that this idoc is not sent as target system is not fully maintained.
    As by now, we would like to verify - what data is extracted now.
    Any help, would be appreciated!

    Hi,
    The fields that are given for each segment have their length given in EDSAPPL table. How you have to map is explained in below example.
    Suppose for segment1, EDSAPPL has 3 fields so below are entries
    SEGMENT          FIELDNAME           LENGTH
    SEGMENT1         FIELD1                   4
    SEGMENT1         FIELD2                   2
    SEGMENT1         FIELD3                   2
    Data in EDID4 would be as follows
    IDOC           SEGMENT                          APPLICATION DATA
    12345         SEGMENT1                        XYZ R Y
    When you are extracting data from these tables into your internal table, mapping has to be as follows:
    FIELD1 = APPLICATIONDATA+0(4)        to read first 4 characters of this field, because the first 4 characters in this field would belong to FIELD1
    Similarly,
    FIELD2 = APPLICATIONDATA+4(2).
    FIELD3 = APPLICATIONDATA+6(2).  
    FIELD1 would have XYZ, FIELD2 = R, FIELD3 = Y
    This would remain true in all cases. So all you need to do is identify which fields you want to extract, and simply code as above to extract the data from this table.
    Hope this was helpful in explaining how to derive the data.

  • How to extract data from oracle database directly in to bi7.0 (net weaver)

    how to extract data from oracle database directly in to bi7.0 (net weaver)? is it something do with EDI? can anybody explain me in detail?
    Thanks
    York

    You can use UDConnect to get from Oracle database in to BW
    <b>Data Transfer with UD Connect -</b>
    http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/content.htm
    <b>Prerequisites</b>
    You have installed the SAP WAS J2EE Engine with BI Java components.  You can find more information on this in the SAP BW installation guide on the SAP Service Marketplace at service.sap.com/instguides.
    Hope it Helps
    Chetan
    @CP..

  • JDBC-XI-FILE scenario. How to extract data from more than one table in JDBC

    Hi,
    I was asked a question like in JDBC-XI-FILE scenario........ How to extract data from more than one tables (i.e from JDBC system) ?? What is the logic to do the same ??
    I am not sure whether this is a valid question..........but any help in this regards is highly appreciated.
    Regards
    Kumar

    HI,
    Yes it can be possible ,please see the following links
    JDBC  Receiver with Oracle Stored Procedures
    configuring jdbc adapter with multiple tables
    RFC -> XI -> JDBC Scenario Updating Multiple Tables
    /people/alessandro.berta/blog/2005/10/04/save-time-with-generalized-jdbc-datatypes
    JDBC Adapter multiple Selects
    https://www.sdn.sap.com/irj/sdn/advancedsearch?query=jdbc%20with%20multiple%20tables&cat=sdn_all
    Regards
    Chilla..

  • How to extract data from info cube into an internal table using ABAP code

    HI
    Can Anyone plz suggest me
    How to extract data from info cube into an internal table using ABAP code like BAPI's or function modules.
    Thankx in advance
    regds
    AJAY

    HI Dinesh,
    Thankq for ur reply
    but i ahve already tried to use the function module.
    When I try to Use the function module RSDRI_INFOPOV_READ
    I get an information message "ERROR GENERATION TEST FRAME".
    can U plz tell me what could be the problem
    Bye
    AJAY

  • How to extract data from Essbase to Flat File using ODI

    Hi,
    Anyone know how to extract data from Essbase to Flat File using ODI?
    Thanks in advance.
    Regards,
    Sumardi

    Hi,
    Have you read through :-
    Oracle Data Integrator Adapter for Hyperion Essbase Getting Started - http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/odiess_getting_started.pdf
    Oracle Data Integrator Adapter for Hyperion Essbase User's Guide - http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/odiess_users.pdf
    If you have read them and are still have a problem at what stage are you having the issues?
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How to extract data from XML file with JavaScript

    HI All
    I am new to this group.
    Can anybody help me regarding XML.
    I want to know How to extract data from XML file with JavaScript.
    And also how to use API for XML
    regards
    Nagaraju

    This is a Java forum.
    JavaScript is something entirely different than Java, even though the names are similar.
    Try another website with forums about JavaScript.
    For example here: http://www.webdeveloper.com/forum/forumdisplay.php?s=&forumid=3

  • How to extract data from SAP 4.7 and upload data to SAP ECC 6.0

    Hi,
        How to extract data from SAP 4.7 and upload data to SAP ECC 6.0? Can i use BDC,BAPI,LSMW? Help me please.

    hi
    good
    both works not possible simultaneously.
    If you want to do it in two separate task than you can use the GUI_UPLOAD function module to fulfill your requirement.
    thanks
    mrutyun^

  • How to extract data from Internet explorer & active MS office applications?

    Hi all,
    Need advice on "How to extract data from Internet explorer & active MS office applications"?
    Thanks in advance
    regards
    DIlip

    If ths search list isn't what you want, just search again:
    http://www.google.com/search?q=get+excel+data+in+java

Maybe you are looking for