How to extract data from structures or create a datasource using structures

Hello Friends , I have a requirement to extract data from ECC fields, but when i go look the table i found only "structures" REBD_CONTRACT_REL_L and i confirmed with ecc team that there are no table available with these fields so how do i now extract the data in BI using the fields in ecc that exist only in these Structures.
Please help me to resolve this
Thanks
Regards
Soniya

check tables
VIOBOV
(VIBDPLANOCC certainly not)
VICNCN table of the contrat
VIOROF table of the offers
VIBDOBJASS affectation of objects.
VICAINTRENO Affectation INTRENO / OBJNR / IMKEY
that will be a good start but ask again your functional persons.
If you want to upload data to BI you have to know the tables
bye
by the way a structure do not hold data.

Similar Messages

  • How to extract data in order to create file for using program RFBIBL00?

    Hi all!
    In order to correct data in mass I need to select corresponding data (3000 FI documents) and extract these into a file in order to correct a field. This extract must having segment 1BKPF 2BSEG... the same file structure than in SXDA_TOOLS for FI documents.
    Which program must I use in order to have the correct extract in order to use the standard program RFBIBL00 for creating FI document?
    Must I create a specific program in order to create this file or only administrator can do this?
    Thanks for your help!
    David

    Hi
    RFBIBL00 is arranged on main strucuters BGR00 (for batcinput session data), BBKPF (for header data) and BBSEG (for item data).
    Both structures BBKPF and BBSEG have to be filled, but only the fields have to be used or changed, the rest of the fields have to have the symbol for NO DATA, i.e /.
    So there are no standard program can do it automatically, so it needs to creaste a program ad hoc....but it can use the Legacy System Migration Worbech (transaction LSMW) in order to do it,
    so your problem can be really how to extract the data to be elaborated by LSMW, but you can do a simple query by se16 and download the result in a excel file
    Max

  • How to extract data from Buffer and create a RTP stream

    Hi
    I'm working on a project where I need to interrupt a media stream (video and audio) and extract the data. Send the data with a custom protocol. On the recieveing side I would like to reconstruct the stream using only the data chunks.
    I'm currently looking at [DataSourceReader.java|http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/DataSourceReader.java] and more specifically at a method like printDataInfo(Buffer buffer) to extract the data.
    Is it possible to create a RTP stream, only having access to the byte array "data" in Buffer ?
    Thanks in advance.

    camelstrike wrote:
    Hi
    I'm working on a project where I need to interrupt a media stream (video and audio) and extract the data. Send the data with a custom protocol. On the recieveing side I would like to reconstruct the stream using only the data chunks.
    I'm currently looking at [DataSourceReader.java|http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/DataSourceReader.java] and more specifically at a method like printDataInfo(Buffer buffer) to extract the data.
    There are a couple of different ways to get the data. Reading it from inside a DataSink is perfectly fine...
    Is it possible to create a RTP stream, only having access to the byte array "data" in Buffer ?Yes and no.
    [http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/CustomPayload.html]
    You need to know the format of the media in addition to the actual media data...

  • How to Extract data from Oracle DB to BW via DBConncet interface.

    HI All,
    Do you know how to extract data from ORACLE data base to BW, using DBConnect.
    Here we are not using R/3 Business content structures.
    How to do it in both source system  and BW side?
    How to define structures on both sides.
    Please provide any documents on that.
    Thanks in Advance.
    Sri.

    Hi Srilaxmi
    Have a look at these links
    http://help.sap.com/saphelp_nw04/helpdata/en/58/54f9c1562d104c9465dabd816f3f24/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/a1/89786c3df35c4ea930a994e884bb4c/content.htm
    http://help.sap.com/saphelp_bw30b/helpdata/en/80/1a618ae07211d2acb80000e829fbfe/content.htm
    and  this thread
    Extract from Oracle View with DB connect
    regards
    KR

  • How to extract data from SAP in FDM 11121

    I came across some documents from version 11113, says there is a SAP adapter, however ,when I check 11121 there's no such adapter, does anyone know how to extract data from SAP in FDM 11121?

    I download a package from Bristlecone, but I dont see any xml files in it, just a bunch of dll and I didn't find any instructions on how to set up/configure in FDM, it just explained how to register in SAP app server and client.
    Hyperion 11113 has readme on sap adapter(Hyperion Readme Template), but I cannot find the same readme file in 11121, all I can find is ERP Integration Adapter document. any idears where I can find at least a readme document?

  • How to extract data from web URL

    I was doing one project which need to extract data from web pages and then analyze these data. the question is how to extract data from there, using html parser? need help, thanks a lot

    I was doing one project which need to extract data
    from web pages and then analyze these data. the
    question is how to extract data from there, using
    html parser? need help, thanks a lotTry this:
    http://java.sun.com/docs/books/tutorial/networking/urls/readingURL.html
    Or, like you said yourself, use an HTML parser:
    http://java-source.net/open-source/html-parsers

  • How to extract data from Chart History?

    Dear all, I have read a lot of posts, but still don't understand how to extract data from Chart history.
    Suppose you acquired 1024 points of data every time, then use "build array" to build an array, then send to intensity chart to show, then save the history into a .txt file,  but how to extact data from the file?
    How Labview store the data in the 2D history buffer?
    Anybody has any examples?

    The simplest would be to save the 2D array as a spreadsheet file, the read it back the same way.
    Maybe the attached simple example can give you some ideas (LabVIEW 7.1). Just run it. At any time, press "write to file". At any later time, you can read the save data into the second history chart.
    If you are worried about performance, it might be better to use binary files, but it will be a little more complicated. See how far you get.
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    IntensityChartHistorySave.vi ‏79 KB

  • How to extract data from planning book

    nu t apo. need help regarding how to extract data from planning book givn the planning book name , view name & some key figures.
    Total Demand (Key Figure DMDTO):
    o     Forecast
    o     Sales Order
    o     Distribution Demand (Planned)
    o     Distribution Demand (Confirmed)
    o     Distribution Demand (TLB-Confirmed)
    o     Dependent Demand
    Total Receipts (Key Figure RECTO):
    o     Distribution Receipt (Planned)
    o     Distribution Receipt (Confirmed)
    o     Distribution Receipt (TLB-Confirmed)
    o     In-Transit
    o     Production (Planned)
    o     Production (Confirmed)
    o     Manufacture of Co-Products
    Stock on Hand (Key Figure STOCK):
    o     Stock on Hand (Excluding Blocked stock)
    o     Stock on Hand (Including Blocked stock)
    In-Transit Inventory (Cross-company stock transfers)
    Work-in-progress (Planned orders / Process orders with start date in one period and finish date in another period)
    Production (Planned), Production (Confirmed) and Distribution Receipt elements need to be converted based on Goods Receipt date for projected inventory calculation.

    Hello Debadrita,
    Function Module BAPI_PBSRVAPS_GETDETAIL2 or BAPI_PBSRVAPS_GETDETAIL can help you.
    For BAPI BAPI_PBSRVAPS_GETDETAIL, the parameters are:
    1) PLANNINGBOOK - the name of your planning book
    2) DATA_VIEW - name of your data view
    3) KEY_FIGURE_SELECTION - list of key figures you want to read
    4)  SELECTION - selection parameters which describe the attributes of the data you want to read (e.g. the category or brand). This is basically a list of characteristics and characteristic values.
    BAPI_PBSRVAPS_GETDETAIL2 is very similar to BAPI_PBSRVAPS_GETDETAI but is only available from SCM 4.1 onwards.
    For the complete list of parameters, you can go to transaction SE37, enter the function module names above and check out the documentation.
    Please post again if you have questions.
    Hope this helps.

  • How to extract data from ODS to non-SAP system

    Hi,
    Can anybody tell me, step by step, how to extract data from ODS to a non-SAP system?
    Is it possible to do it without programming effort? And is there volume limits for this kind of extraction?
    The non-SAP system is an unix system.
    Thanks in advance
    Ella

    Ella,
    You can look at it from the concept of a BADI / Infospoke
    Extract the data from the ODS to a Flat file / RDBMS using an infospoke. I am not sure as to how the infospoke loads data into the RDBMS ( did it very long ago ) but then you can push it into an RDBMS and I am sure it will be system neutral.
    Hope this helps...
    Arun
    Assign points if it helps

  • How to extract data from custom made Idoc that is not sent

    Hi experts,
    Could you please advise if there is a way how to extract data from custom made idoc (it collects a lot of data from different SAP tables)? Please note that this idoc is not sent as target system is not fully maintained.
    As by now, we would like to verify - what data is extracted now.
    Any help, would be appreciated!

    Hi,
    The fields that are given for each segment have their length given in EDSAPPL table. How you have to map is explained in below example.
    Suppose for segment1, EDSAPPL has 3 fields so below are entries
    SEGMENT          FIELDNAME           LENGTH
    SEGMENT1         FIELD1                   4
    SEGMENT1         FIELD2                   2
    SEGMENT1         FIELD3                   2
    Data in EDID4 would be as follows
    IDOC           SEGMENT                          APPLICATION DATA
    12345         SEGMENT1                        XYZ R Y
    When you are extracting data from these tables into your internal table, mapping has to be as follows:
    FIELD1 = APPLICATIONDATA+0(4)        to read first 4 characters of this field, because the first 4 characters in this field would belong to FIELD1
    Similarly,
    FIELD2 = APPLICATIONDATA+4(2).
    FIELD3 = APPLICATIONDATA+6(2).  
    FIELD1 would have XYZ, FIELD2 = R, FIELD3 = Y
    This would remain true in all cases. So all you need to do is identify which fields you want to extract, and simply code as above to extract the data from this table.
    Hope this was helpful in explaining how to derive the data.

  • How to extract data from oracle database directly in to bi7.0 (net weaver)

    how to extract data from oracle database directly in to bi7.0 (net weaver)? is it something do with EDI? can anybody explain me in detail?
    Thanks
    York

    You can use UDConnect to get from Oracle database in to BW
    <b>Data Transfer with UD Connect -</b>
    http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/content.htm
    <b>Prerequisites</b>
    You have installed the SAP WAS J2EE Engine with BI Java components.  You can find more information on this in the SAP BW installation guide on the SAP Service Marketplace at service.sap.com/instguides.
    Hope it Helps
    Chetan
    @CP..

  • JDBC-XI-FILE scenario. How to extract data from multiple tables

    Hi,
    At this moment I didn't have the access for XI system. So here I have some silly question. Could you please clarify the same ??
    If I got to extract data from single table using JDBC adapter I can put the below query in communication channel
    SELECT *FROM orders WHERE new='true'.
    But if I got to extract data from multiple tables, logic to be used should be like as shown below. ( from previous thread------prabhu).
    SELECT <Table_2>.EID, <Table_2>.FName, <Table_2>.LName, <Table_1>.REC_DAT, <Table_1>.DESCRP
    FROM <Table_1> INNER JOIN <Table_2> on
    <Table_1>.CARDNO = <Table_2>.CARD
    where REC_DAT = <condition>
    union
    SELECT <Table_2>.EID, <Table_2>.FName, <Table_2>.LName, <Table_1>.REC_DAT, <Table_1>.DESCRP
    FROM <Table_1> INNER JOIN <Table_2> on
    <Table_1>.CARDNO = <Table_2>.CARD
    where REC_DAT = <condition>
    But my query is ........how to put the above entire code in one line. (i.e in Qery place of communication channel ) ??
    Thanks
    Kumar

    Hi Palnati,
        You either use a select query with join or a stored procedure which will contain the logic to extract the data from multiple tables. But, the limitation in case of stored procedure is u can hv only one selct query in it.
    You write ur actual query provided in the parameter 'Query SQL Statement". u can also wrt a stored procedure in it. Also, u can provide a update statement in it which will update a certain flag so tht u don selct the data again.
    Check the following link
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm</a>
    Regards,
    Akshay
    Message was edited by:
            Akshay Salunke

  • JDBC-XI-FILE scenario. How to extract data from more than one table in JDBC

    Hi,
    I was asked a question like in JDBC-XI-FILE scenario........ How to extract data from more than one tables (i.e from JDBC system) ?? What is the logic to do the same ??
    I am not sure whether this is a valid question..........but any help in this regards is highly appreciated.
    Regards
    Kumar

    HI,
    Yes it can be possible ,please see the following links
    JDBC  Receiver with Oracle Stored Procedures
    configuring jdbc adapter with multiple tables
    RFC -> XI -> JDBC Scenario Updating Multiple Tables
    /people/alessandro.berta/blog/2005/10/04/save-time-with-generalized-jdbc-datatypes
    JDBC Adapter multiple Selects
    https://www.sdn.sap.com/irj/sdn/advancedsearch?query=jdbc%20with%20multiple%20tables&cat=sdn_all
    Regards
    Chilla..

  • How to extract data from info cube into an internal table using ABAP code

    HI
    Can Anyone plz suggest me
    How to extract data from info cube into an internal table using ABAP code like BAPI's or function modules.
    Thankx in advance
    regds
    AJAY

    HI Dinesh,
    Thankq for ur reply
    but i ahve already tried to use the function module.
    When I try to Use the function module RSDRI_INFOPOV_READ
    I get an information message "ERROR GENERATION TEST FRAME".
    can U plz tell me what could be the problem
    Bye
    AJAY

  • How to extract data from Essbase to Flat File using ODI

    Hi,
    Anyone know how to extract data from Essbase to Flat File using ODI?
    Thanks in advance.
    Regards,
    Sumardi

    Hi,
    Have you read through :-
    Oracle Data Integrator Adapter for Hyperion Essbase Getting Started - http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/odiess_getting_started.pdf
    Oracle Data Integrator Adapter for Hyperion Essbase User's Guide - http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/odiess_users.pdf
    If you have read them and are still have a problem at what stage are you having the issues?
    Cheers
    John
    http://john-goodwin.blogspot.com/

Maybe you are looking for

  • How do I convert a pdf file into word doc.

    I have been trying on my own to figure out the above question, to no avail.  If anyone can help me, I would truly appreciatel it.  Thank you.

  • Reading Crystal Report under Portal 8.1

    Hi, Does anyone try to use crystal report api to read the report in portal 8.1? We try the sample but it's not working. Andy

  • Encore CS4 crashes from Dynamic Link

    I can open Encore fine but its when I do Dynamic Link from Premiere to Encore that it crashes and asks me to report the problem.  This is the first of me having this problem has we havent used the feature very much.  Thanks for any help.

  • Why when Oracle gives me a 00060 Deadlock error do my trace logs no graphs?

    Normally everything you read online shows you that Oracle's trace files will contain a deadlock graph. At work we have trace files being generated and when we look at the trace file reference by the alert file there is no deadlock graph for any deadl

  • Is Aqualogic BPM a replacement for WLI ?

    Hi all, Until now I have worked with Workshop 8.x to build my processes. Now I have downloaded Workshop 9.x and I cannot see anymore JPD in it. I wonder if Bea is dropping WLI for Aq BPM...... As in the subject: is Aq BPM a replacement for WLI ? Than