How to extract data in order to create file for using program RFBIBL00?

Hi all!
In order to correct data in mass I need to select corresponding data (3000 FI documents) and extract these into a file in order to correct a field. This extract must having segment 1BKPF 2BSEG... the same file structure than in SXDA_TOOLS for FI documents.
Which program must I use in order to have the correct extract in order to use the standard program RFBIBL00 for creating FI document?
Must I create a specific program in order to create this file or only administrator can do this?
Thanks for your help!
David

Hi
RFBIBL00 is arranged on main strucuters BGR00 (for batcinput session data), BBKPF (for header data) and BBSEG (for item data).
Both structures BBKPF and BBSEG have to be filled, but only the fields have to be used or changed, the rest of the fields have to have the symbol for NO DATA, i.e /.
So there are no standard program can do it automatically, so it needs to creaste a program ad hoc....but it can use the Legacy System Migration Worbech (transaction LSMW) in order to do it,
so your problem can be really how to extract the data to be elaborated by LSMW, but you can do a simple query by se16 and download the result in a excel file
Max

Similar Messages

How to extract data from structures or create a datasource using structures

Hello Friends , I have a requirement to extract data from ECC fields, but when i go look the table i found only "structures" REBD_CONTRACT_REL_L and i confirmed with ecc team that there are no table available with these fields so how do i now extract the data in BI using the fields in ecc that exist only in these Structures.
Please help me to resolve this
Thanks
Regards
Soniya

check tables
VIOBOV
(VIBDPLANOCC certainly not)
VICNCN table of the contrat
VIOROF table of the offers
VIBDOBJASS affectation of objects.
VICAINTRENO Affectation INTRENO / OBJNR / IMKEY
that will be a good start but ask again your functional persons.
If you want to upload data to BI you have to know the tables
bye
by the way a structure do not hold data.

How to extract data from Essbase to Flat File using ODI

Hi,
Anyone know how to extract data from Essbase to Flat File using ODI?
Thanks in advance.
Regards,
Sumardi

Hi,
Have you read through :-
Oracle Data Integrator Adapter for Hyperion Essbase Getting Started - http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/odiess_getting_started.pdf
Oracle Data Integrator Adapter for Hyperion Essbase User's Guide - http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/odiess_users.pdf
If you have read them and are still have a problem at what stage are you having the issues?
Cheers
John
http://john-goodwin.blogspot.com/

Install RMS 13.1 How to add data boundaries in the ddl files for UK?

Hello Retail Gurus,
I have installed RMS 13.1 without running the partition.ksh script while installing the Retail Database for RMS and it created some sample data too, I have seen the Install Guide and especially looked at the Partitioning Steps in the Guide , Can anyone give a hint ,how the data boundaries are modified in the ddl files for UK?. Since I am a DBA i am little confused , from where to get these data? as the installation guide mentions that the RMS_partition_defintion.xls has to modified and used for a production installation combined with partition_attributes.cfg for a production installation.
Thanks in Advance
-- Vivek

Hi Vivek,
Let's see...
UK means united kingdom of great brittain? I think there are no UK specific DDL statements related to RMS.
If you look at the installer (unpack the zips from edelivery.oracle.com for e.g. RMS 13.1), checkout the folders
V16908-01\rms_13.1_install\rms13dbschema\rms\dbschema\dbscripts_rms\examples\part
V16908-01\rms_13.1_install\rms13dbschema\rms\dbschema\dbscripts_rms\ddl\part
This contains a ksh script that is driven by a config scripts and some lists of specific partitions in folder data_def.
This partition.ksh script can recreate some table's DDL from non-partitioned to partitioned.
The mentioned XLS file can also be found in this folder and helps in setting the number of partitions and doing one dimensional or e.g. multi-dimensional (e.g. range/hash).
The whole process is explained in quite some detail in the last chapter of the merchandise implementation guide, merch-131-impg.pdf.
When your system already containts data, this should be saved and re-placed.
Please note that the indexes on partitioned tables may need partitioning too, at least some reflection on this is required and afaik the RMS installer tries to cater for this too.
Best regards,
Erik Ykema
Edited by: ErikYkema on Oct 29, 2010 8:05 AM

How to extract data from Buffer and create a RTP stream

Hi
I'm working on a project where I need to interrupt a media stream (video and audio) and extract the data. Send the data with a custom protocol. On the recieveing side I would like to reconstruct the stream using only the data chunks.
I'm currently looking at [DataSourceReader.java|http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/DataSourceReader.java] and more specifically at a method like printDataInfo(Buffer buffer) to extract the data.
Is it possible to create a RTP stream, only having access to the byte array "data" in Buffer ?
Thanks in advance.

camelstrike wrote:
Hi
I'm working on a project where I need to interrupt a media stream (video and audio) and extract the data. Send the data with a custom protocol. On the recieveing side I would like to reconstruct the stream using only the data chunks.
I'm currently looking at [DataSourceReader.java|http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/DataSourceReader.java] and more specifically at a method like printDataInfo(Buffer buffer) to extract the data.
There are a couple of different ways to get the data. Reading it from inside a DataSink is perfectly fine...
Is it possible to create a RTP stream, only having access to the byte array "data" in Buffer ?Yes and no.
[http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/CustomPayload.html]
You need to know the format of the media in addition to the actual media data...

How to extract data from an arbitrary xml file and export in a nice csv file?

Hallo,
I'm facing big problems in the use of XML files. I have an
application which generates XML files with clusters containing arrays
and scalars like in the example pasted below. My task is to
read it and export the data in a human-friendly CSV document.
Since I don't know the actual content of the cluster, I need some kind
of intelligent vi which goes through the XML file looking for arrays
and other data structures in order to export them properly in the CSV
format (columns with headers).
Thank you
<Cluster>
<Name></Name>
<NumElts>3</NumElts>
<Array>
<Name></Name>
<Dimsize>6</Dimsize>
<I32>
<Name></Name>
<Val>0</Val>
</I32>
<I32>
<Name></Name>
<Val>1</Val>
</I32>
<I32>
<Name></Name>
<Val>2</Val>
</I32>
<I32>
<Name></Name>
<Val>3</Val>
</I32>
<I32>
<Name></Name>
<Val>4</Val>
</I32>
<I32>
<Name></Name>
<Val>5</Val>
</I32>
</Array>
<DBL>
<Name></Name>
<Val>3.14159265358979</Val>
</DBL>
<String>
<Name></Name>
<Val>ciao</Val>
</String>
</Cluster>
Solved!
Go to Solution.

Thank you again,
I'm forwarding my vi draft with many comments and an xml file sample.
Data in cluster is stored according to the LabVIEW schema, infact it is generated by LabVIEW.
What I'm trying to do is to access the element of the cluster and read their content using the Invoke node and Property node functions. Could you give it a look, there may be something wrong, I'm not able to access cluster children.
Which funcions should I use? Could you give me an example? You may use the draft I enclosed...
Then write these data in a csv file
should be the easier part.
BODY{font:x-small 'Verdana';margin-right:1.5em}
.c{cursor:hand}
.b{color:red;font-family:'Courier New';font-weight:bold;text-decoration:none}
.e{margin-left:1em;text-indent:-1em;margin-right:1em}
.k{margin-left:1em;text-indent:-1em;margin-right:1em}
.t{color:#990000}
.xt{color:#990099}
.ns{color:red}
.dt{color:green}
.m{color:blue}
.tx{font-weight:bold}
.db{text-indent:0px;margin-left:1em;margin-top:0px;margin-bottom:0px;padding-left:.3em;border-left:1px solid #CCCCCC;font:small Courier}
.di{font:small Courier}
.d{color:blue}
.pi{color:blue}
.cb{text-indent:0px;margin-left:1em;margin-top:0px;margin-bottom:0px;padding-left:.3em;font:small Courier;color:#888888}
.ci{font:small Courier;color:#888888}
PRE{margin:0px;display:inline}
<?xml
version="1.0" encoding="iso-8859-1" ?>
<Contents type="Data"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="XMLSection.xsd">
<section name="beta"
date="7/31/2009" time="3:43:03 PM" version="1.0">
<Cluster>
<Name />
<NumElts>1</NumElts>
<Array>
<Name />
<Dimsize>4</Dimsize>
<DBL>
<Name>number: 0 to 1</Name>
<Val>0.93317638164326</Val>
</DBL>
<DBL>
<Name>number: 0 to 1</Name>
<Val>0.79233924020314</Val>
</DBL>
<DBL>
<Name>number: 0 to 1</Name>
<Val>0.39199947274518</Val>
</DBL>
<DBL>
<Name>number: 0 to 1</Name>
<Val>0.74817197429441</Val>
</DBL>
</Array>
</Cluster>
</section>
</Contents>
Attachments:
read_array.vi ‏12 KB

How to extract data into the set-up table for 2LIS_06_INV LIS structure

We are using ECC 6.0 and SAP BI NW 2004S. I activated the 2LIS_06_INV (Invoice Verification) structure. Interestingly, I don't see any Events under this structure (MC06M_0ITM) - my understanding is the events usually determine what type of data is generated for a given structure.
I see Invoice Verification when I use the Inventory Management -Perform Setup option when doing the set-up tables. However, when I use this option, I get a message saying " No extraction structure active or no BW connected".
Can someone list the pre-requisites and the steps to load the set-up table for the 2LIS_06_INV structure.
Thanks,
Sanjay

1: RSA5 Activate Data Source
2: LBWE Activate datasource again
3: SBIW Fill setup table 'Settings for Application-Specific DataSources (PI)'-> 'Initialization'->'Filling in the Setup Table'->'Application-Specific Setup of Statistical Data'->'Invoice Verification - Execute Reconstruction'

How to trigger data recording to a text file for multiple channels for a certain voltage threshold?

I am working with 6 channels, from each of which I am obtaining voltage values ranging from 0.6-6 V. I am using the DAQ Assistant to acquire and write the data to a text file. However, I only want the data to be written to the text file when the difference in voltage (DeltaV) from one data point to another is greater than or equal to 0.04 V. I am acquiring the data at a sampling rate of 64 Hz. Any ideas on how to accomplish this? I have attached my current VI.
Attachments:
Data Triggering.vi ‏116 KB

Faizah wrote:
I am obtaining voltage values ranging from 0.6-6 V.
I only want the data to be written to the text file when the difference in voltage (DeltaV) from one data point to another is greater than or equal to 0.04 V.
Your code does not do what you describe above..
I just want to make sure I understand your request...
Let's say you have the following signal:
0.00
0.01
0.00
0.03
0.02
0.01
0.03
0.04
0.07
0.05
0.08
0.03 < delta greater than 0.04, so start recording
0.11
0.21
0.45
0.93
2.87
5.85
5.86 < delta less than 0.04, so stop recording
5.87
5.89
6.00 < delta greater than 0.04, so start recording
5.85
5.86 < delta less than 0.04, so stop recording
etc..
Is the above what you are describing?
Right now, your code does this:
0.00
0.01
0.00
0.03
0.02
0.01
0.03
0.04
0.07
0.05
0.08
0.03
0.11
0.21
0.45
0.93
2.87 < threshold greater than 1 so reset timer
5.85 < threshold greater than 1 so reset timer
5.86 < threshold greater than 1 so reset timer
5.87 < threshold greater than 1 so reset timer
5.89 < threshold greater than 1 so reset timer
6.00 < threshold greater than 1 so reset timer
5.85 < threshold greater than 1 so reset timer
5.86 < threshold greater than 1 so reset timer
4.35 < threshold greater than 1 so reset timer
2.21 < threshold greater than 1 so reset timer
1.09 < threshold greater than 1 so reset timer
0.98
However, you did not provide a set start time to the Elapse Time (I never use Express VI's so I'm not sure what will happen..) However, something does not appear correct with the logic. I'd have to check.

How to fill data in to extended idoc segments for outbound program

Hi all,
I am new to this Community In the extension of Standard idoc INVOIC02 with some custom segments like zemail, zfax,,,,how to fill the data into both standard segments and custom segments for outbound idoc using exit EXIT_SAPLVEDF_002 of standard function module IDOC_OUTPUT_INVOIC...
i need some sample code
THANKS
PAVAN K

Hi all,
I am new to this Community In the extension of Standard idoc INVOIC02 with some custom segments like zemail, zfax,,,,how to fill the data into both standard segments and custom segments for outbound idoc using exit EXIT_SAPLVEDF_002 of standard function module IDOC_OUTPUT_INVOIC...
i need some sample code
THANKS
PAVAN K

How can I export or convert to AVI file for use on PC?

I know I did this back in Jan 2009 but can't remember the process to get an AVI file that retains the sound. I thought I exported a SWF and then somehow converted it to an AVI.
*The file:*
*Retains sound, builds and movement.*
*Automatically advances, using "control p" to pause (did not retain the click-to-advance feature).*
I've been reviewing third party software but they seem to all state that the won't retain the sound/builds etc.
Any ideas?
Thanks!

The simplest way is to export as QT and then open the QT using Quick Time Player. If you've got pro you can export as .avi.
There are videos on youtube showing you how to upgrade to QT Pro for free...

How to Extract the Highlight Text in PDF File

Hi Scripters,
i want know, how to extract the hightlight text in pdf files for text only format for (*.txt) file extension save.
regards
baby

Hi,
Okay i'll try do best.
thanks for your reply.
Regards
Baby

Open Hub: How-to doc "How to Extract data with Open Hub to a Logical File"

Hi all,
We are using open hub to download transaction files from infocubes to application server, and would like to have filename which is dynamic based period and year, i.e. period and year of the transaction data to be downloaded.
I understand we could use logical file for this purpose. However we are not sure how to have the period and year to be dynamically derived in filename.
I have read in sdn a number of posted messages on a similar topic and many have suggested a 'How-to' paper titled "How to Extract data with Open Hub to a Logical Filename". However i could not seem to be able to get document from the link given.
Just wonder if anyone has the correct or latest link to the document, or would appreciate if you could share the document with all in sdn if you have a copy.
Many thanks and best regards,
Victoria

Hi,
After creating open hub press F1 in Application server file name text box from the help window there u Click on Maintain 'Client independent file names and file paths' then u will be taken to the Implementation guide screen > click on Cross client maintanance of file name > create a logical file path by clicking on new entiries > after creating logical file path now go to Logical file name definition there give your Logical file , name , physical file (ur file name followed by month or year what ever is applicable (press f1 for more info)) , data format (ASC) , application area (BW) and logical path (choose from F4 selection which u have created first), now goto Assignment of physical path to logical path > give syntax group >physical path is the path u gave at logical file name definition.
however we have created a logical path file name to identify the file by sys date but ur requirement seems to be of dynamic date of tranaction data...may u can achieve this by creating a variable. U can see the help from F1 that would be of much help to u. All the above steps i have explained will help u create a dynamic logical file.
hope this helps u to some extent.
Regards

How to extract data from planning book

nu t apo. need help regarding how to extract data from planning book givn the planning book name , view name & some key figures.
Total Demand (Key Figure DMDTO):
o     Forecast
o     Sales Order
o     Distribution Demand (Planned)
o     Distribution Demand (Confirmed)
o     Distribution Demand (TLB-Confirmed)
o     Dependent Demand
Total Receipts (Key Figure RECTO):
o     Distribution Receipt (Planned)
o     Distribution Receipt (Confirmed)
o     Distribution Receipt (TLB-Confirmed)
o     In-Transit
o     Production (Planned)
o     Production (Confirmed)
o     Manufacture of Co-Products
Stock on Hand (Key Figure STOCK):
o     Stock on Hand (Excluding Blocked stock)
o     Stock on Hand (Including Blocked stock)
In-Transit Inventory (Cross-company stock transfers)
Work-in-progress (Planned orders / Process orders with start date in one period and finish date in another period)
Production (Planned), Production (Confirmed) and Distribution Receipt elements need to be converted based on Goods Receipt date for projected inventory calculation.

Hello Debadrita,
Function Module BAPI_PBSRVAPS_GETDETAIL2 or BAPI_PBSRVAPS_GETDETAIL can help you.
For BAPI BAPI_PBSRVAPS_GETDETAIL, the parameters are:
1) PLANNINGBOOK - the name of your planning book
2) DATA_VIEW - name of your data view
3) KEY_FIGURE_SELECTION - list of key figures you want to read
4) SELECTION - selection parameters which describe the attributes of the data you want to read (e.g. the category or brand). This is basically a list of characteristics and characteristic values.
BAPI_PBSRVAPS_GETDETAIL2 is very similar to BAPI_PBSRVAPS_GETDETAI but is only available from SCM 4.1 onwards.
For the complete list of parameters, you can go to transaction SE37, enter the function module names above and check out the documentation.
Please post again if you have questions.
Hope this helps.

JDBC-XI-FILE scenario. How to extract data from multiple tables

Hi,
At this moment I didn't have the access for XI system. So here I have some silly question. Could you please clarify the same ??
If I got to extract data from single table using JDBC adapter I can put the below query in communication channel
SELECT *FROM orders WHERE new='true'.
But if I got to extract data from multiple tables, logic to be used should be like as shown below. ( from previous thread------prabhu).
SELECT <Table_2>.EID, <Table_2>.FName, <Table_2>.LName, <Table_1>.REC_DAT, <Table_1>.DESCRP
FROM <Table_1> INNER JOIN <Table_2> on
<Table_1>.CARDNO = <Table_2>.CARD
where REC_DAT = <condition>
union
SELECT <Table_2>.EID, <Table_2>.FName, <Table_2>.LName, <Table_1>.REC_DAT, <Table_1>.DESCRP
FROM <Table_1> INNER JOIN <Table_2> on
<Table_1>.CARDNO = <Table_2>.CARD
where REC_DAT = <condition>
But my query is ........how to put the above entire code in one line. (i.e in Qery place of communication channel ) ??
Thanks
Kumar

Hi Palnati,
You either use a select query with join or a stored procedure which will contain the logic to extract the data from multiple tables. But, the limitation in case of stored procedure is u can hv only one selct query in it.
You write ur actual query provided in the parameter 'Query SQL Statement". u can also wrt a stored procedure in it. Also, u can provide a update statement in it which will update a certain flag so tht u don selct the data again.
Check the following link
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm</a>
Regards,
Akshay
Message was edited by:
Akshay Salunke

How to extract data via webservices and configure webservices in BI 7

Hi to all,
Can any body tell me How to extract data via webservices and configure webservices in BI 7.
i have created a remote functionmodule which extract data from R/3 , now i want to upload data to BI 7 using that remote function module.
i have use webservice (push) as adapter mode, as i want to connect function module with SOAP , via web services.
please can any body tell how to do that.
also how to configure the webserive , what is it .
I SHALL BE THANKFULL TO YOU FOR THAT
Regards
Pavneet rana

Hi,
1. Using the function library (transaction SE37), call the Web service creation wizard.
To do this, select the desired function module in the function library and choose Utilities ®Generate Web Service ® From the Function Module.
2. Go through the following steps, shown in the wizard:
a. Create a virtual interface.
The virtual interface represents the interface between the Web Service and the outside.
b. Choose the end point.
The name of the function module that is to be offered as Web service is already entered here.
c. Create the Web service definition.
The Web service definition helps with assigning the Web service features, such as how security can be guaranteed in data transfer.
d. Release the Web service.
The wizard generates the object virtual interface and Web service definition in the object navigator.
The function group that was generated when the XML DataSource was created is not transportable and is thus assigned to a local package. To prevent errors due to transports, make sure that the objects that were generated in the Web service creation wizard are assigned to a local non-transportable package.
The Web service is released for the SOAP runtime.
3. In the virtual interface for the import parameter DATASOURCE, define the name of the XML DataSource as the fixed value.
A separate function group is generated for each XML DataSource. It makes sense to pre-assign the parameter DATASOURCE with the name of the XML DataSource in the virtual interface of the Web service for which the function group was generated.
If you do not pre-assign the parameter, it will be necessary to transfer the data sent with the appropriate filled DataSource element, for example, by setting the value in the application that implements the Web service.
a. In the object navigator, choose the name of the package in which the Web service was created and choose Enterprise Services ® Web Service Library ® Virtual Interfaces.
b. Choose Change in the context menu for the virtual interface.
c. For the virtual interface, remove the flags exposed and initial and enter the name of the XML DataSource in apostrophes, for example u20196ADATASOURCENAMEu2019.
d. Activate the virtual interface.
Regards,
Marasa.

How to extract data in order to create file for using program RFBIBL00?

Similar Messages

Maybe you are looking for