How to extract data on the diagonal of a square matrix

Hi, I am quite new to this. I have Labview 7.1. I am having a bit of trouble with the following:
I have a square array and would like to extract the data ocurring on the diagonal of this array into a 1d array. Can anyone help me with this? Kind regards.
R

Another solution, with a much smaller diagram :
Use a FOR loop, WITH autoindexing, then use "index array" wired to the loop counter to extract the diagonal elements.
See the attached exemple.
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Extract_Diagonal.vi ‏18 KB

Similar Messages

How to extract data from the fields present in two or three tables

Hi Experts,
I have a scenario where i have to extract data from the fields of different tables. e.g. let there 2 tables which have some number of fields . I want the data of 3 fields each from these 2 tables. How can i get that??
Sam

Hi
You can create view in tcode se11..
here you include all tables from which you want to fetch the data..
you need to give selection condition here
eg..
say select empname from table A, select empadd from table B.. where empno(from A)=empno(from B)
(note that you dont need to write queries like this.. i have just given u the example)
After creating the view you can create datasource in RSO2..
Regards
Swati

How to Extract Data from the PDF file to an internal table.

HI friends,
How can i Extract data from a PDF file to an internal table....
Thanks in Advance
Shankar

Shankar,
Have a look at these threads:-
extracting the data from pdf file to internal table in abap
Adobe Form (data extraction error)
Chintan

How to extract data into the set-up table for 2LIS_06_INV LIS structure

We are using ECC 6.0 and SAP BI NW 2004S. I activated the 2LIS_06_INV (Invoice Verification) structure. Interestingly, I don't see any Events under this structure (MC06M_0ITM) - my understanding is the events usually determine what type of data is generated for a given structure.
I see Invoice Verification when I use the Inventory Management -Perform Setup option when doing the set-up tables. However, when I use this option, I get a message saying " No extraction structure active or no BW connected".
Can someone list the pre-requisites and the steps to load the set-up table for the 2LIS_06_INV structure.
Thanks,
Sanjay

1: RSA5 Activate Data Source
2: LBWE Activate datasource again
3: SBIW Fill setup table 'Settings for Application-Specific DataSources (PI)'-> 'Initialization'->'Filling in the Setup Table'->'Application-Specific Setup of Statistical Data'->'Invoice Verification - Execute Reconstruction'

How to extract data from the XL sheet for mapping

Hello all,
I have a scenario of file to idoc, where in the source file contains the information in XL sheet. Can we access the XL sheet data for mapping ? if so can anyone helpme providing the procedure.

Hi,
For reading an XL file u need to write an java code.
refer the below weblog for more help:
SAP Network Blog: XI: Generating Excel files without the Java nor the Conversion agent not possible?
/people/michal.krawczyk2/blog/2005/12/10/xi-generating-excel-files-without-the-java-nor-the-conversion-agent-not-possible
SAP Network Blog: Read Excel instead of XML through FileAdapter
/people/sap.user72/blog/2005/07/04/read-excel-instead-of-xml-through-fileadapter
Thnx
Chirag

How to Extract data and reports from the SAP BW warehouse

Hi to All Guru's
I am new to SAP BW. Can any one help me to know, How to Extract data and reports from SAP BW. Do we use any tools. After Extracting the data from SAP BW how can we move all the data to Cognos. It would be kind enough to provide me with any documentation or links. Step by step procedure would be very much helpfull to me.
Thanks
Venu

Hi Voodi
Thanks for the quick response. I think Open hub is to extract the data from SAP BW, but what about sending this data into Cognos. Can you please let me know in detail regarding answer. If possible send me any documentation or links regarding this. Thanks for your concern.
Venu

Open Hub: How-to doc "How to Extract data with Open Hub to a Logical File"

Hi all,
We are using open hub to download transaction files from infocubes to application server, and would like to have filename which is dynamic based period and year, i.e. period and year of the transaction data to be downloaded.
I understand we could use logical file for this purpose. However we are not sure how to have the period and year to be dynamically derived in filename.
I have read in sdn a number of posted messages on a similar topic and many have suggested a 'How-to' paper titled "How to Extract data with Open Hub to a Logical Filename". However i could not seem to be able to get document from the link given.
Just wonder if anyone has the correct or latest link to the document, or would appreciate if you could share the document with all in sdn if you have a copy.
Many thanks and best regards,
Victoria

Hi,
After creating open hub press F1 in Application server file name text box from the help window there u Click on Maintain 'Client independent file names and file paths' then u will be taken to the Implementation guide screen > click on Cross client maintanance of file name > create a logical file path by clicking on new entiries > after creating logical file path now go to Logical file name definition there give your Logical file , name , physical file (ur file name followed by month or year what ever is applicable (press f1 for more info)) , data format (ASC) , application area (BW) and logical path (choose from F4 selection which u have created first), now goto Assignment of physical path to logical path > give syntax group >physical path is the path u gave at logical file name definition.
however we have created a logical path file name to identify the file by sys date but ur requirement seems to be of dynamic date of tranaction data...may u can achieve this by creating a variable. U can see the help from F1 that would be of much help to u. All the above steps i have explained will help u create a dynamic logical file.
hope this helps u to some extent.
Regards

How to Extract data from a Request management tool to Apex to avoid working on Excel reports

Client uses a ticketing tool,I donot know what is the database for the tool,but I would like to know the best way to extract data from the tool to pex so that we can eliminate working on Excel reports.These excel reports are basically the open request log,resolved tickets,aging tickets etc,currently we work on many excel reports,can we achieve this in Apex ,if so how do we achieve this.Then we would like to use this report and prepare multiple charts,how the above two requirements can be mapped.

A very important function for the system will be - one sends an email in certain format to a dummy email address, then some data will be extracted from the email based on the pre-defined format and inserted into the database my APEX application is using.
Any idea on how I can make it happen please? I agree that this is not really an Apex question, but a more general PL/SQL question.
There are many approaches, all boiling down to one of these two:
1) Push: Some process in the mail server sends/forwards information to your database when new mail arrives.
The language/tools used to do this, and the way it would connect to your database, depends on your environment (what is your operating system? mail server? existing middleware/tools? security protocols used? etc.).
2) Pull: Some process in the database contacts the mail server and polls for new information.
Ie. some PL/SQL code would communicate with the mail server. Again, it depends on your environment (what is your operating system? mail server? existing middleware/tools? security protocols used? etc.).
For example, if you are using Exchange 2007 or newer, it has a web services API:
http://msdn.microsoft.com/en-us/library/dd877045.aspx
The challenge here will be to build the correct SOAP requests from PL/SQL, and to handle the security protocols used.
- Morten
http://ora-00001.blogspot.com

How to extract data from a structure?(Data Dictionary)

Hi all,
       This is regarding extracting data from a structure.
For Eg:if we want to extract data from a structure ADDR1_DATA,How will we do that in report programming?Structures on its own has no existence unless it s attached to a database table or view.when am using 'Where used List' on that structure also I am not getting any database tables or views.What can I do about this?
Thanking you,
anjaly

HI Anjaly,
as you said structure does not have any value .. unless something is added to it..
So just use the structure to define the type of the sttructure you want..
Or to include it in your itab like..
data : Begin of itab occurs 0.
       include structure ADDR1_DATA.
data i type i.
       end of itab.
you cannot directly extract data from the structure ADDR1_DATA..
regards
satesh

How to extract data of a view

Hi,
I'm working with VB.net and SBO 2005. My question is :
How to extract data of a view ?
Thank you.

Hi!
View is just a T-SQL statement stored and saved on the server side. All you need is to query this view using the following syntax:
SELECT <view columns> FROM <view name> WHERE <conditions>
So the syntax is the same as T-SQL SELECT-clause
HTH

How to extract data from SAP in FDM 11121

I came across some documents from version 11113, says there is a SAP adapter, however ,when I check 11121 there's no such adapter, does anyone know how to extract data from SAP in FDM 11121?

I download a package from Bristlecone, but I dont see any xml files in it, just a bunch of dll and I didn't find any instructions on how to set up/configure in FDM, it just explained how to register in SAP app server and client.
Hyperion 11113 has readme on sap adapter(Hyperion Readme Template), but I cannot find the same readme file in 11121, all I can find is ERP Integration Adapter document. any idears where I can find at least a readme document?

How to extract data from web URL

I was doing one project which need to extract data from web pages and then analyze these data. the question is how to extract data from there, using html parser? need help, thanks a lot

I was doing one project which need to extract data
from web pages and then analyze these data. the
question is how to extract data from there, using
html parser? need help, thanks a lotTry this:
http://java.sun.com/docs/books/tutorial/networking/urls/readingURL.html
Or, like you said yourself, use an HTML parser:
http://java-source.net/open-source/html-parsers

How to extract data from Chart History?

Dear all, I have read a lot of posts, but still don't understand how to extract data from Chart history.
Suppose you acquired 1024 points of data every time, then use "build array" to build an array, then send to intensity chart to show, then save the history into a .txt file, but how to extact data from the file?
How Labview store the data in the 2D history buffer?
Anybody has any examples?

The simplest would be to save the 2D array as a spreadsheet file, the read it back the same way.
Maybe the attached simple example can give you some ideas (LabVIEW 7.1). Just run it. At any time, press "write to file". At any later time, you can read the save data into the second history chart.
If you are worried about performance, it might be better to use binary files, but it will be a little more complicated. See how far you get.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
IntensityChartHistorySave.vi ‏79 KB

How to extract data from planning book

nu t apo. need help regarding how to extract data from planning book givn the planning book name , view name & some key figures.
Total Demand (Key Figure DMDTO):
o     Forecast
o     Sales Order
o     Distribution Demand (Planned)
o     Distribution Demand (Confirmed)
o     Distribution Demand (TLB-Confirmed)
o     Dependent Demand
Total Receipts (Key Figure RECTO):
o     Distribution Receipt (Planned)
o     Distribution Receipt (Confirmed)
o     Distribution Receipt (TLB-Confirmed)
o     In-Transit
o     Production (Planned)
o     Production (Confirmed)
o     Manufacture of Co-Products
Stock on Hand (Key Figure STOCK):
o     Stock on Hand (Excluding Blocked stock)
o     Stock on Hand (Including Blocked stock)
In-Transit Inventory (Cross-company stock transfers)
Work-in-progress (Planned orders / Process orders with start date in one period and finish date in another period)
Production (Planned), Production (Confirmed) and Distribution Receipt elements need to be converted based on Goods Receipt date for projected inventory calculation.

Hello Debadrita,
Function Module BAPI_PBSRVAPS_GETDETAIL2 or BAPI_PBSRVAPS_GETDETAIL can help you.
For BAPI BAPI_PBSRVAPS_GETDETAIL, the parameters are:
1) PLANNINGBOOK - the name of your planning book
2) DATA_VIEW - name of your data view
3) KEY_FIGURE_SELECTION - list of key figures you want to read
4) SELECTION - selection parameters which describe the attributes of the data you want to read (e.g. the category or brand). This is basically a list of characteristics and characteristic values.
BAPI_PBSRVAPS_GETDETAIL2 is very similar to BAPI_PBSRVAPS_GETDETAI but is only available from SCM 4.1 onwards.
For the complete list of parameters, you can go to transaction SE37, enter the function module names above and check out the documentation.
Please post again if you have questions.
Hope this helps.

How to extract data from ODS to non-SAP system

Hi,
Can anybody tell me, step by step, how to extract data from ODS to a non-SAP system?
Is it possible to do it without programming effort? And is there volume limits for this kind of extraction?
The non-SAP system is an unix system.
Thanks in advance
Ella

Ella,
You can look at it from the concept of a BADI / Infospoke
Extract the data from the ODS to a Flat file / RDBMS using an infospoke. I am not sure as to how the infospoke loads data into the RDBMS ( did it very long ago ) but then you can push it into an RDBMS and I am sure it will be system neutral.
Hope this helps...
Arun
Assign points if it helps

How to extract data on the diagonal of a square matrix

Similar Messages

Maybe you are looking for