How to Extract data using Query or any data fucntion in Excel.

Dear Users,
i want to ask one question about excel..............
i have a parts list sheet, it contains part-number , price, name........ in columns. now my question is this that for example part names are as under ,
fix contactor
moveable contactor
half contactor
contactor gm
contactor skf
as you saw in the names of parts contactor is the same in all the column. i want such a query that extract all the entries which contain contactor and make a new column or highlight them in the same column. my requirement is very similar to dos command when
i want to see the list of all files which have exe extension ...dir *.exe.
Best Regards
Tahir Mehmood

=IFERROR(IF(FIND( "contactor" ,LOWER(A1))>0,TRUE,FALSE), FALSE)
This formula checks cell A1 and will flag TRUE if it matches the requirements of the specified text. Have wrapped a lower function around the cell to mitigate for different upper or lower case mismatches.
Alternativey you can use conditional formatting > "Use a formula to determine which cells to format" and use the following formula =FIND("contactor", LOWER(A1)) >0. Change the format to colour in the cell and copy the
format down to all corresponding cells. This will now highlight those that match the text value.
Regards

Similar Messages

How to extract data from info cube into an internal table using ABAP code

HI
Can Anyone plz suggest me
How to extract data from info cube into an internal table using ABAP code like BAPI's or function modules.
Thankx in advance
regds
AJAY

HI Dinesh,
Thankq for ur reply
but i ahve already tried to use the function module.
When I try to Use the function module RSDRI_INFOPOV_READ
I get an information message "ERROR GENERATION TEST FRAME".
can U plz tell me what could be the problem
Bye
AJAY

How to extract data from Essbase to Flat File using ODI

Hi,
Anyone know how to extract data from Essbase to Flat File using ODI?
Thanks in advance.
Regards,
Sumardi

Hi,
Have you read through :-
Oracle Data Integrator Adapter for Hyperion Essbase Getting Started - http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/odiess_getting_started.pdf
Oracle Data Integrator Adapter for Hyperion Essbase User's Guide - http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/odiess_users.pdf
If you have read them and are still have a problem at what stage are you having the issues?
Cheers
John
http://john-goodwin.blogspot.com/

How to extract data by using function module in generic extraction please

how to extract data by using function module in generic extraction please give me steps required

Dear Deba,
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
If the requirement is like extracting data from multiple tables with some complex logic then views cannot be used..so u cna go for FM is used where it can be achieved.
Chk these
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
check the following thread
generic extraction with function module
Generic Extraction with function module
Regards,
Ram.

How to extract data of a view

Hi,
I'm working with VB.net and SBO 2005. My question is :
How to extract data of a view ?
Thank you.

Hi!
View is just a T-SQL statement stored and saved on the server side. All you need is to query this view using the following syntax:
SELECT <view columns> FROM <view name> WHERE <conditions>
So the syntax is the same as T-SQL SELECT-clause
HTH

How to extract data from Chart History?

Dear all, I have read a lot of posts, but still don't understand how to extract data from Chart history.
Suppose you acquired 1024 points of data every time, then use "build array" to build an array, then send to intensity chart to show, then save the history into a .txt file, but how to extact data from the file?
How Labview store the data in the 2D history buffer?
Anybody has any examples?

The simplest would be to save the 2D array as a spreadsheet file, the read it back the same way.
Maybe the attached simple example can give you some ideas (LabVIEW 7.1). Just run it. At any time, press "write to file". At any later time, you can read the save data into the second history chart.
If you are worried about performance, it might be better to use binary files, but it will be a little more complicated. See how far you get.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
IntensityChartHistorySave.vi ‏79 KB

JDBC-XI-FILE scenario. How to extract data from more than one table in JDBC

Hi,
I was asked a question like in JDBC-XI-FILE scenario........ How to extract data from more than one tables (i.e from JDBC system) ?? What is the logic to do the same ??
I am not sure whether this is a valid question..........but any help in this regards is highly appreciated.
Regards
Kumar

HI,
Yes it can be possible ,please see the following links
JDBC Receiver with Oracle Stored Procedures
configuring jdbc adapter with multiple tables
RFC -> XI -> JDBC Scenario Updating Multiple Tables
/people/alessandro.berta/blog/2005/10/04/save-time-with-generalized-jdbc-datatypes
JDBC Adapter multiple Selects
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=jdbc%20with%20multiple%20tables&cat=sdn_all
Regards
Chilla..

How to extract data via webservices and configure webservices in BI 7

Hi to all,
Can any body tell me How to extract data via webservices and configure webservices in BI 7.
i have created a remote functionmodule which extract data from R/3 , now i want to upload data to BI 7 using that remote function module.
i have use webservice (push) as adapter mode, as i want to connect function module with SOAP , via web services.
please can any body tell how to do that.
also how to configure the webserive , what is it .
I SHALL BE THANKFULL TO YOU FOR THAT
Regards
Pavneet rana

Hi,
1. Using the function library (transaction SE37), call the Web service creation wizard.
To do this, select the desired function module in the function library and choose Utilities ®Generate Web Service ® From the Function Module.
2. Go through the following steps, shown in the wizard:
a. Create a virtual interface.
The virtual interface represents the interface between the Web Service and the outside.
b. Choose the end point.
The name of the function module that is to be offered as Web service is already entered here.
c. Create the Web service definition.
The Web service definition helps with assigning the Web service features, such as how security can be guaranteed in data transfer.
d. Release the Web service.
The wizard generates the object virtual interface and Web service definition in the object navigator.
The function group that was generated when the XML DataSource was created is not transportable and is thus assigned to a local package. To prevent errors due to transports, make sure that the objects that were generated in the Web service creation wizard are assigned to a local non-transportable package.
The Web service is released for the SOAP runtime.
3. In the virtual interface for the import parameter DATASOURCE, define the name of the XML DataSource as the fixed value.
A separate function group is generated for each XML DataSource. It makes sense to pre-assign the parameter DATASOURCE with the name of the XML DataSource in the virtual interface of the Web service for which the function group was generated.
If you do not pre-assign the parameter, it will be necessary to transfer the data sent with the appropriate filled DataSource element, for example, by setting the value in the application that implements the Web service.
a. In the object navigator, choose the name of the package in which the Web service was created and choose Enterprise Services ® Web Service Library ® Virtual Interfaces.
b. Choose Change in the context menu for the virtual interface.
c. For the virtual interface, remove the flags exposed and initial and enter the name of the XML DataSource in apostrophes, for example u20196ADATASOURCENAMEu2019.
d. Activate the virtual interface.
Regards,
Marasa.

How to Extract data and reports from the SAP BW warehouse

Hi to All Guru's
I am new to SAP BW. Can any one help me to know, How to Extract data and reports from SAP BW. Do we use any tools. After Extracting the data from SAP BW how can we move all the data to Cognos. It would be kind enough to provide me with any documentation or links. Step by step procedure would be very much helpfull to me.
Thanks
Venu

Hi Voodi
Thanks for the quick response. I think Open hub is to extract the data from SAP BW, but what about sending this data into Cognos. Can you please let me know in detail regarding answer. If possible send me any documentation or links regarding this. Thanks for your concern.
Venu

How to Extract data from Oracle DB to BW via DBConncet interface.

HI All,
Do you know how to extract data from ORACLE data base to BW, using DBConnect.
Here we are not using R/3 Business content structures.
How to do it in both source system and BW side?
How to define structures on both sides.
Please provide any documents on that.
Thanks in Advance.
Sri.

Hi Srilaxmi
Have a look at these links
http://help.sap.com/saphelp_nw04/helpdata/en/58/54f9c1562d104c9465dabd816f3f24/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/a1/89786c3df35c4ea930a994e884bb4c/content.htm
http://help.sap.com/saphelp_bw30b/helpdata/en/80/1a618ae07211d2acb80000e829fbfe/content.htm
and this thread
Extract from Oracle View with DB connect
regards
KR

How to extract data from BW cube

Hello friends,
Kindly advice me how to extract data from BW cube.
My requirement is to write an ABAP program to retrive the data from the BW cube.
Kindly provide me any sample code for my requirement.
Thanks in advance.
S.Jaffer Ali

Hi Jaffer,
If you want to load the data from the BW cube into any other Cube/ODS in the same of another BW system you can use the export datasource.
If you want to load the data from the BW cube into any other system then you can use any of these options:
1. Infospoke - Open hub service and is widely used.
2. APD
3. RFC enabled fn modules.
Bye
Dinesh

Open Hub: How-to doc "How to Extract data with Open Hub to a Logical File"

Hi all,
We are using open hub to download transaction files from infocubes to application server, and would like to have filename which is dynamic based period and year, i.e. period and year of the transaction data to be downloaded.
I understand we could use logical file for this purpose. However we are not sure how to have the period and year to be dynamically derived in filename.
I have read in sdn a number of posted messages on a similar topic and many have suggested a 'How-to' paper titled "How to Extract data with Open Hub to a Logical Filename". However i could not seem to be able to get document from the link given.
Just wonder if anyone has the correct or latest link to the document, or would appreciate if you could share the document with all in sdn if you have a copy.
Many thanks and best regards,
Victoria

Hi,
After creating open hub press F1 in Application server file name text box from the help window there u Click on Maintain 'Client independent file names and file paths' then u will be taken to the Implementation guide screen > click on Cross client maintanance of file name > create a logical file path by clicking on new entiries > after creating logical file path now go to Logical file name definition there give your Logical file , name , physical file (ur file name followed by month or year what ever is applicable (press f1 for more info)) , data format (ASC) , application area (BW) and logical path (choose from F4 selection which u have created first), now goto Assignment of physical path to logical path > give syntax group >physical path is the path u gave at logical file name definition.
however we have created a logical path file name to identify the file by sys date but ur requirement seems to be of dynamic date of tranaction data...may u can achieve this by creating a variable. U can see the help from F1 that would be of much help to u. All the above steps i have explained will help u create a dynamic logical file.
hope this helps u to some extent.
Regards

How to extract data from SAP in FDM 11121

I came across some documents from version 11113, says there is a SAP adapter, however ,when I check 11121 there's no such adapter, does anyone know how to extract data from SAP in FDM 11121?

I download a package from Bristlecone, but I dont see any xml files in it, just a bunch of dll and I didn't find any instructions on how to set up/configure in FDM, it just explained how to register in SAP app server and client.
Hyperion 11113 has readme on sap adapter(Hyperion Readme Template), but I cannot find the same readme file in 11121, all I can find is ERP Integration Adapter document. any idears where I can find at least a readme document?

How to extract data from web URL

I was doing one project which need to extract data from web pages and then analyze these data. the question is how to extract data from there, using html parser? need help, thanks a lot

I was doing one project which need to extract data
from web pages and then analyze these data. the
question is how to extract data from there, using
html parser? need help, thanks a lotTry this:
http://java.sun.com/docs/books/tutorial/networking/urls/readingURL.html
Or, like you said yourself, use an HTML parser:
http://java-source.net/open-source/html-parsers

How to extract data from ODS to non-SAP system

Hi,
Can anybody tell me, step by step, how to extract data from ODS to a non-SAP system?
Is it possible to do it without programming effort? And is there volume limits for this kind of extraction?
The non-SAP system is an unix system.
Thanks in advance
Ella

Ella,
You can look at it from the concept of a BADI / Infospoke
Extract the data from the ODS to a Flat file / RDBMS using an infospoke. I am not sure as to how the infospoke loads data into the RDBMS ( did it very long ago ) but then you can push it into an RDBMS and I am sure it will be system neutral.
Hope this helps...
Arun
Assign points if it helps

How to extract data from custom made Idoc that is not sent

Hi experts,
Could you please advise if there is a way how to extract data from custom made idoc (it collects a lot of data from different SAP tables)? Please note that this idoc is not sent as target system is not fully maintained.
As by now, we would like to verify - what data is extracted now.
Any help, would be appreciated!

Hi,
The fields that are given for each segment have their length given in EDSAPPL table. How you have to map is explained in below example.
Suppose for segment1, EDSAPPL has 3 fields so below are entries
SEGMENT          FIELDNAME           LENGTH
SEGMENT1         FIELD1                   4
SEGMENT1         FIELD2                   2
SEGMENT1         FIELD3                   2
Data in EDID4 would be as follows
IDOC           SEGMENT                          APPLICATION DATA
12345         SEGMENT1                        XYZ R Y
When you are extracting data from these tables into your internal table, mapping has to be as follows:
FIELD1 = APPLICATIONDATA+0(4)        to read first 4 characters of this field, because the first 4 characters in this field would belong to FIELD1
Similarly,
FIELD2 = APPLICATIONDATA+4(2).
FIELD3 = APPLICATIONDATA+6(2).
FIELD1 would have XYZ, FIELD2 = R, FIELD3 = Y
This would remain true in all cases. So all you need to do is identify which fields you want to extract, and simply code as above to extract the data from this table.
Hope this was helpful in explaining how to derive the data.

How to Extract data using Query or any data fucntion in Excel.

Similar Messages

Maybe you are looking for