How to extract driver to install in Windos 7

Hi guys I have a proyect that I will like someone to help me out with, and it's as follow I own a Thunderbolt display also a 2011 McMini and I buit a PC with a ASUS P8Z77-V Premium MB which have a thunderbolt port buid in. Now I have connect the thunderbolt display to the PC thunderbolt port and the display works but the driver for the ethernet and built in camara windows don't requinize them.
Now I know that I can setup Windows 7 on my McMini through boot camp and my question is as follow, There is a way after done install windows 7 through boot camp on my McMini that I can extract the drivers for my thunderbolt display, ethernet adpter and bult in camara then use them to install them on my Windows PC setup? Thanks in advance guys.

1) how to create hierarchies of Org. units in BI 7.0 give me steps.
   U just have to load hierarchies created in ECC... The standard datasource that loads 0ORGUNIT   
   hierarchy is 0ORGUNIT_HR01_HIER... Assign this datasource to 0ORGUNIT (transfer rules) and
   create infopackage (in 'Hierarchy selection' tab, if u click 'available Hierarchies from OLTP' button, it
   will give u all available hierarchies (technical name ORGEH) for 0ORGUNIT)
   To check existing orgunits in ECC
      Use tcode PPOSE
      Expand 'Organizational Unit' Node
      Click on 'Structure Search'
2) I am not able to load data into standard info cubes(0PA_C01 and 0PAOS_C01).
      These infocubes has many fields like Gender,Nationality,Language,Age in Years,Country 
      key,County Code,Region (State, Province, County),Postal Code etc..
      All these fields are populated through routines (reads master data of 0EMPLOYEE) and a start 
      routine.
      So, u have to be careful when u install standard content, make sure u install routines for above 
      objects mapping in transfer rules. Also make sure the "Start Routine" installed properly
      In ECC, also check data exists in infotypes PA0000 & PA0302 (for 0PA_C01) and HRP1000, 
      HRP1001, HRP1007 & PA0007 (0PAOS_C01)

Similar Messages

  • How many usb drives to install windows 8.1

    Hi!
    I hope that someone can help answer my question.
    I need to install windows on my laptop.  It is an Air with 4gb ram and 256g drive from 2011.
    So, I tried to download windows to my mac but that didn't work.  The windows store only allows downloading to a windows machine!
    Ok, so I erased my usb flash drive and installed a copy of the software on the usb drive (it is formatted as exFat, I think).
    Good, take this to my Air and start Bootcamp assistant.  Now it tells me that it will erase that usb drive to put the support software on there.
    What the heck?  Wouldn't it have told me I needed two usb drives?  Is that possibly true? Can't both files be on one 32gb flash drive?
    Am I missing something?  I've done a ton of stuff on mac over the years but this does seem difficult.
    Peter

    You can install Windows using Boot Camp Assistant, instructions located here: http://www.apple.com/support/bootcamp/
    Or, you can install Windows using a virtual machine like Parallels, Fusion, or VirtualBox. Instructions located on their respective sites.

  • How can I use a remote CD/DVD drive to install MacOS 10.4?

    Hello,
    My old iBook G3 needs to be updated to MacOS 10.4 however its CD drive doesn't work. I have an retail copy of Tiger and have put it in my iBook G4 but when I open the installer it doesn't allow me to choose my mounted iBook G3 (which I have connected through a wireless network). How can I use my iBook G4's CD/DVD drive to install MacOS 10.4 on my iBook G3?
    Any help would be appreciated.
    iBook G4 Mac OS X (10.4.6)

    'Making matters worse' seems a bit excessive, since it isn't that uncommon for an optical drive to die in an otherwise perfectly good machine. (Ask parents with inquisitive kids, for example!
    Plus, this is an iBook, & I don't believe OWC sells replacement internal drives for them, only for PowerBooks, so it doesn't seem that unreasonable to suggest that he first try something that has a good chance of doing what he wants to do, which is install Tiger on the iBook, rather than suggest anything that may or may not be appropriate for his situation.
    Since he already has purchased the DVD, the most he is risking with the TDM approach is the cost of a 6 pin to 6 pin FW cable, which he still should find useful no matter what else he decides to do. If nothing else, it shouldn't cost anymore than the exchange of the DVD for CD's, right?

  • I'm trying to install an update to itunes that downloaded but can't complete installation as its trying to install onto D: drive. I don't have a D drive and i'm not given option of selecting the drive to install on. How can i select the drive that i want

    I'm trying to install itunes but can't complete installation as its trying to install onto F: drive. I don't have a F drive and I'm not given option of selecting the drive to install on. How can I select the drive that i want to install on?

    Hi,
    How do you connect the printer to the XP machine ? If USB, you need to make that machine as a Print server. Please try this:
       http://techtips.salon.com/make-windows-computer-pr​int-server-11914.html
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to deal with the "driver not installed" message?

    My issue, and it seems many others here have it too, is how to install a printer driver in the face of the "driver not installed" message.
    In my case, it's an HP4160 Rendevous printer. I've deleted the com.apple.print files in the Library, reinstalled the software, made sure that BDC package, or whatever it's called is installed, even downloaded and run the printer fix software from Fixamac.
    Nothing works.
    I have the feeling this isn't a printer or driver-specific issue, but is an OS problem. Does anyone have a suggestion?

    It appears the Deskjet 4160 will not work with an Airport. Connected via USB, the driver installs normally and the the printer appears to run just fine, although I haven't done much with it yet.
    It simply will not work on a wireless network through an Airport. Frustrating, but workable by bringing the laptop to the printer.

  • My Power Mac G4 MDD has no DVD drive how do I pair it install OS X on my new HD.

    My Power Mac G4 MDD has no DVD drive how do I pair it install OS X on my new HD.

    Hi, two ways...
    Put the Install Disc in another Mac tathas Firewire, put the other Mac into Target mode...
    http://support.apple.com/kb/HT1661
    This turns the other Mac into a big Firewire DVD drive, then boot the MDD holding the Option Key, select the Install Disc in the other Mac to boot the MDD from.
    Or an external FW DVD...
    http://eshop.macsales.com/item/OWC/MRF82SD24LS/
    Oh, & a thiird way...
    http://eshop.macsales.com/shop/optical-drives/superdrives/powermac/mdd

  • How many IDE drives & CDrom can be installed with SATA drives??

    How many IDE drives & CDrom can be installed with SATA drives??
    i have 2 IDE hard disks & 2 CDROM drives: can install SATA hard disk added to these drives or do i have to remove some???
    & if it can be added, can i install 2 SATA drives???
    THX in advance

    The 3 versions of this board that are available are:
    875P Neo-FISR (PCB 2.0)
    875P Neo-LSR (PCB 1.0)
    875P Neo-FIS2R (PCB 1.0)
    All of these boards will have the following ports provider by the chipsets ICH5R south bridge.
    2 x SATA (Supporting 2 SATA HDD drives)
    2 x PATA (Supporting 4 IDE devices)
    All 6 of these can be used at the same time (provided you are using win XP or 2K) you just need to make sure yor BIOS is set right.
    ->INTEGRATED PERIPHERALS
    ->ON-CHIP IDE CONFIG
    ATA CONFIG: S-ATA ONLY or P-ATA ONLY
    S-ATA/P-ATA KEEP ENABLED: YES
    OPERATE MODE:
    If you set to "legacy mode" S-ATA are set to channel 1 and 2 and P-ATA to channel 3 and 4. If you set to "native mode" P-ATA are channel 1 and 2 and S-ATA 3 and 4. You can only use the raid functionfon SATA in native mode.
    If you have the 875P Neo-FIS2R (PCB 1.0) you will also have the following ports provided by the Promise PDC20378 PCI controller:
    2 x SATA (Supporting 2 SATA HDD drives)
    1 x PATA (Supporting 1 Master IDE HDD drive)
    The PATA port is limited to 1 Master HDD by the lite BIOS. This can in theory be upgraded to the full BIOS supporting a master and a slave, but this may obviously void your warranty.
    So the answer to your origional question is:
    2 x SATA HDDs and 4 x IDE HDD/CDROM if you have 875P Neo-FISR (PCB 2.0) or 875P Neo-LSR (PCB 1.0)
    or
    4 x SATA HDDs, 1 x IDE HDD (2 if you modify the BIOS) and 4 x IDE HDD/CDROM if you have 875P Neo-FIS2R (PCB 1.0)

  • How to extract fonts from OS X install DVD

    Friends:
    I often get the message when I open Keynote or Pages that some errors occurred and that the font "Helvetica" is missing. How can I get said font from my install DVD? I would install it using Font Books -> Add Fonts right?
    The weird thing is also looking in Font Book, that Helvetica is there... but my main question is how to extract the fonts from the install DVD.
    Thanks amigos, -Migs

    Get Pacifist from versiontracker.com. Then, insert the Leopard DVD. Launch Pacifist. Click the appropriate button to extract from Install Disk. It will take a while to "open" the Install Disk. Search for what you want. Install it. The software puts it where it should go.

  • How to download when i already have a serial number, but no drive to install the cd in my lap

    how to download when i already have a serial number, but no drive to install the cd in my lap

    Download the trial version and activate it.
    Mylenium

  • HT1338 I downloaded OS X moutain lion but it won't let me install it on my MAC HD drive. it says it can't becease time machaine use the MAC HD drive. How do I get this Installed?

    e time machaine use the MAC HD drive. How do I get this Installed?

    Welcome to Apple Support Communities
    That's because you have a "Backups.backupdb" folder at the root level of the hard disk, so the Mountain Lion installer detects that your OS X partition is being used by Time Machine. Just open Finder, select Go menu (on the menu bar) > Go to Folder, and type "/" (without quotes). Finally, delete the "Backups.backupdb" folder and run the OS X installer again

  • How come my mac isnt showing my external hard drive after installing os x maverick? and how to i fix that??

    how come my mac isnt showing my external hard drive after installing os x maverick? and how to i fix that??

    How do you mean it isn't showing the external drive?  If you mean on the desktop, click Finder on the menu bar, Preferences, General and check the boxes for Show these items on the desktop - make sure hard drives is checked.
    If you mean it is not showing in Finder or Disk Utility, make sure it is turned on, reboot and see if that mounts it so it shows up.

  • Hi, how I format the drive and install a fresh copy of Lion?

    Hi, I have a Lion installed on a Mackbook Pro 2011, I had Leopard, then Snow Leopard and then Lion, but with so many instalations without formating the system is not working well, I am using an iMac at work with a clean install and is much more stable.
    How can I format the hard drive and install a fresh copy of Lion???

    Install or Reinstall Lion from Scratch
    If possible backup your files to an external drive or second internal drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
    Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Install button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • Macbook won't boot after mavericks - how to backup to external drive and install new OS

    I have a macbook pro - mid 2011 running 10.6.8. Tried to install mavericks and now computer can't boot, constantly restarts. I've tried reinstalling twice and repaired the disk, everything is OK and reinstallation didn't work. I bought 10.8 to install- apple sent me a link via email. How do I backup the drive through an external drive, erase the current drive, and then install 10.8?

    You will have to boot from your Recovery HD:
    Clone Mavericks, Lion/Mountain Lion using Restore Option of Disk Utility
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         1. Select Disk Utility from the main menu then press the Continue
             button.
         2. Select the destination volume from the left side list.
         3. Click on the Restore tab in the DU main window.
         4. Select the destination volume from the left side list and drag it
             to the Destination entry field.
         5. Select the source volume from the left side list and drag it to
             the Source entry field.
         6. Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    Install or Reinstall Mavericks or Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    OS X Mavericks- Erase and reinstall OS X
    OS X Mountain Lion- Erase and reinstall OS X
    OS X Lion- Erase and reinstall Mac OS X
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • Already i download driver for install the windows, i can get the drivers but i can't install windows, how i can install windows without downloads driver again

    already i download driver for install the windows, i can get the drivers but i can't install windows, how i can install windows without download driver again

    This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You can find the Commercial Laserjet board here:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • How can find software to install lbp3010b driver, how can find software to install lbp3010b driver

    dear all, how can find way to install software driver for lbp3010b, thanks.....

    contact makers of stuffilt deluxe http://www.stuffit.com/about/contact.html 

Maybe you are looking for