How to Extract Hierarchies from ECC6.00 to BI7.0 ?

Hi,
I am using SAP BI7.00 and SAP ECC 6.00 . How to extract Hierarchies from SAP ECC 6.00 server? .
Regards,
Krishna.

Hi Johnson,
The transfer of P.O from SRM to R/3 happens through function module (RFC) and not IDOC. Only the transfer of GR and invoice happens through IDOC.
The above scenario happens when you are using Extended Classic.
In case of classic scenario, you can only have P.O details in SRM that to in Check status of Shopping cart. You can not display or change a P.O in classic scenario.
IDOCs are not used for the transfer of P.O from R/3 to SRM. And there is no mapping exists for the replication.
Hope this makes you clear. Clarifications are welcome.
Rgds,
Teja

Similar Messages

How to Load Hierarchies from flatfile in BI7

Hello Gurus,
How to load Hierarchies from flat file in BI7
As when creating datasource in BI7,
IT GIVES FOLLOWING OPTIONS
TRANSCTION DATA
MASTER DATA TEXTS
MASTER DATA ATTRIBUTES...
ALL THESE WE BRING TO PSA LEVEL BY INFOPACKAGE AND SEND DATATARGET BY DTP...
But how about Hierarchies...
Looking for reply
Regards
Guru

Look at the below blog for step by step procedure :
Hierarchy Upload from Flat files
http://help.sap.com/saphelp_nw04/helpdata/en/fa/e92637c2cbf357e10000009b38f936/frameset.htm

How to extract data from oracle database directly in to bi7.0 (net weaver)

how to extract data from oracle database directly in to bi7.0 (net weaver)? is it something do with EDI? can anybody explain me in detail?
Thanks
York

You can use UDConnect to get from Oracle database in to BW
<b>Data Transfer with UD Connect -</b>
http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/content.htm
<b>Prerequisites</b>
You have installed the SAP WAS J2EE Engine with BI Java components. You can find more information on this in the SAP BW installation guide on the SAP Service Marketplace at service.sap.com/instguides.
Hope it Helps
Chetan
@CP..

How to extract text from a PDF file?

Hello Suners,
i need to know how to extract text from a pdf file?
does anyone know what is the character encoding in pdf file, when i use an input stream to read the file it gives encrypted characters not the original text in the file.
is there any procedures i should do while reading a pdf file,
File f=new File("D:/File.pdf");
               FileReader fr=new FileReader(f);
               BufferedReader br=new BufferedReader(fr);
               String s=br.readLine();any help will be deeply appreciated.

jverd wrote:
First, you set i once, and then loop without ever changing it. So your loop body will execute either 0 times or infinitely many times, writing the same byte every time. Actually, maybe it'll execute once and then throw an ArrayIndexOutOfBoundsException. That's basic java looping, and you're going to need a firm grip on that before you try to do anything as advanced as PDF reading. the case.oops you are absolutely right that was a silly mistake to forget that,
Second, what do the docs for getPageContent say? Do they say that it simply gives you the text on the page as if the thing were a simple text doc? I'd be surprised if that's the case.getPageContent return array of bytes so the question will be:
how to get text from this array? i was thinking of :
    private void jButton1_actionPerformed(ActionEvent e) {
        PdfReader read;
        StringBuffer buff=new StringBuffer();
        try {
            read = new PdfReader("d:/getjobid2727.pdf");
            read.getMetaData();
            byte[] data=read.getPageContent(1);
            int i=0;
            while(i>-1){
                buff.append(data);
i++;
String str=buff.toString();
FileOutputStream fos = new FileOutputStream("D:/test.txt");
Writer out = new OutputStreamWriter(fos, "UTF8");
out.write(str);
out.close();
read.close();
} catch (Exception f) {
f.printStackTrace();
"D:/test.txt" hasn't been created!! when i ran the program,
is my steps right?

How to extract text from a PDF file using php?

How to extract text from a PDF file using php?
thanks
fabio

> Do you know of any other way this can be done?
There are many ways. But this out of scope of this forum. You can try this forum: http://forum.planetpdf.com/

How to extract data from SAP in FDM 11121

I came across some documents from version 11113, says there is a SAP adapter, however ,when I check 11121 there's no such adapter, does anyone know how to extract data from SAP in FDM 11121?

I download a package from Bristlecone, but I dont see any xml files in it, just a bunch of dll and I didn't find any instructions on how to set up/configure in FDM, it just explained how to register in SAP app server and client.
Hyperion 11113 has readme on sap adapter(Hyperion Readme Template), but I cannot find the same readme file in 11121, all I can find is ERP Integration Adapter document. any idears where I can find at least a readme document?

How to extract data from web URL

I was doing one project which need to extract data from web pages and then analyze these data. the question is how to extract data from there, using html parser? need help, thanks a lot

I was doing one project which need to extract data
from web pages and then analyze these data. the
question is how to extract data from there, using
html parser? need help, thanks a lotTry this:
http://java.sun.com/docs/books/tutorial/networking/urls/readingURL.html
Or, like you said yourself, use an HTML parser:
http://java-source.net/open-source/html-parsers

How to extract data from Chart History?

Dear all, I have read a lot of posts, but still don't understand how to extract data from Chart history.
Suppose you acquired 1024 points of data every time, then use "build array" to build an array, then send to intensity chart to show, then save the history into a .txt file, but how to extact data from the file?
How Labview store the data in the 2D history buffer?
Anybody has any examples?

The simplest would be to save the 2D array as a spreadsheet file, the read it back the same way.
Maybe the attached simple example can give you some ideas (LabVIEW 7.1). Just run it. At any time, press "write to file". At any later time, you can read the save data into the second history chart.
If you are worried about performance, it might be better to use binary files, but it will be a little more complicated. See how far you get.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
IntensityChartHistorySave.vi ‏79 KB

How to extract data from planning book

nu t apo. need help regarding how to extract data from planning book givn the planning book name , view name & some key figures.
Total Demand (Key Figure DMDTO):
o     Forecast
o     Sales Order
o     Distribution Demand (Planned)
o     Distribution Demand (Confirmed)
o     Distribution Demand (TLB-Confirmed)
o     Dependent Demand
Total Receipts (Key Figure RECTO):
o     Distribution Receipt (Planned)
o     Distribution Receipt (Confirmed)
o     Distribution Receipt (TLB-Confirmed)
o     In-Transit
o     Production (Planned)
o     Production (Confirmed)
o     Manufacture of Co-Products
Stock on Hand (Key Figure STOCK):
o     Stock on Hand (Excluding Blocked stock)
o     Stock on Hand (Including Blocked stock)
In-Transit Inventory (Cross-company stock transfers)
Work-in-progress (Planned orders / Process orders with start date in one period and finish date in another period)
Production (Planned), Production (Confirmed) and Distribution Receipt elements need to be converted based on Goods Receipt date for projected inventory calculation.

Hello Debadrita,
Function Module BAPI_PBSRVAPS_GETDETAIL2 or BAPI_PBSRVAPS_GETDETAIL can help you.
For BAPI BAPI_PBSRVAPS_GETDETAIL, the parameters are:
1) PLANNINGBOOK - the name of your planning book
2) DATA_VIEW - name of your data view
3) KEY_FIGURE_SELECTION - list of key figures you want to read
4) SELECTION - selection parameters which describe the attributes of the data you want to read (e.g. the category or brand). This is basically a list of characteristics and characteristic values.
BAPI_PBSRVAPS_GETDETAIL2 is very similar to BAPI_PBSRVAPS_GETDETAI but is only available from SCM 4.1 onwards.
For the complete list of parameters, you can go to transaction SE37, enter the function module names above and check out the documentation.
Please post again if you have questions.
Hope this helps.

How to extract data from ODS to non-SAP system

Hi,
Can anybody tell me, step by step, how to extract data from ODS to a non-SAP system?
Is it possible to do it without programming effort? And is there volume limits for this kind of extraction?
The non-SAP system is an unix system.
Thanks in advance
Ella

Ella,
You can look at it from the concept of a BADI / Infospoke
Extract the data from the ODS to a Flat file / RDBMS using an infospoke. I am not sure as to how the infospoke loads data into the RDBMS ( did it very long ago ) but then you can push it into an RDBMS and I am sure it will be system neutral.
Hope this helps...
Arun
Assign points if it helps

How to extract data from custom made Idoc that is not sent

Hi experts,
Could you please advise if there is a way how to extract data from custom made idoc (it collects a lot of data from different SAP tables)? Please note that this idoc is not sent as target system is not fully maintained.
As by now, we would like to verify - what data is extracted now.
Any help, would be appreciated!

Hi,
The fields that are given for each segment have their length given in EDSAPPL table. How you have to map is explained in below example.
Suppose for segment1, EDSAPPL has 3 fields so below are entries
SEGMENT          FIELDNAME           LENGTH
SEGMENT1         FIELD1                   4
SEGMENT1         FIELD2                   2
SEGMENT1         FIELD3                   2
Data in EDID4 would be as follows
IDOC           SEGMENT                          APPLICATION DATA
12345         SEGMENT1                        XYZ R Y
When you are extracting data from these tables into your internal table, mapping has to be as follows:
FIELD1 = APPLICATIONDATA+0(4)        to read first 4 characters of this field, because the first 4 characters in this field would belong to FIELD1
Similarly,
FIELD2 = APPLICATIONDATA+4(2).
FIELD3 = APPLICATIONDATA+6(2).
FIELD1 would have XYZ, FIELD2 = R, FIELD3 = Y
This would remain true in all cases. So all you need to do is identify which fields you want to extract, and simply code as above to extract the data from this table.
Hope this was helpful in explaining how to derive the data.

How to extract certificates from IE for digital signature

hi
how to extract certificates from the cert store provided by Internet Explorer 6.0 and use it to read & verify the digital signatures present in the pc.this is needed in my web based application n i have no idea!!!
pls help me out
i have studied a lot about all JCA n JCE but the extraction part still baffles me!!!
my application will be java based so i can make an applet/ servlet/ jsp
drop your ideas as soon as u get time as i am stuck in the initial phase itself
priya_16

hi
i've the same problem. i've found this solution, but you need download a JCE Provider that allow you to read the explorer certificate store.
You can try this one: https://download.assembla.se/jceprovider/
and the code:
import se.assembla.*;
public class Listcerts {
     public static void list() throws Exception{
          java.security.Security.insertProviderAt(new se.assembla.jce.provider.ms.MSProvider(), 2);
          KeyStore ks = KeyStore.getInstance("MSKS","assembla");
          ks.load(null,null);
          X509Certificate cert=null;
          String alias=null;
          int count=0;
          for (java.util.Enumeration e=ks.aliases();e.hasMoreElements();){
                    alias=(String)e.nextElement();
                    cert=(X509Certificate)ks.getCertificate(alias);
                    System.out.println("\n Certificado alias"+alias+":");
                    System.out.println(cert);
               count++;
          System.out.println ("NUM CERTS="+count);
now, i need the same solution for Firefox browser XP
good luck
Message was edited by:
meteko

JDBC-XI-FILE scenario. How to extract data from more than one table in JDBC

Hi,
I was asked a question like in JDBC-XI-FILE scenario........ How to extract data from more than one tables (i.e from JDBC system) ?? What is the logic to do the same ??
I am not sure whether this is a valid question..........but any help in this regards is highly appreciated.
Regards
Kumar

HI,
Yes it can be possible ,please see the following links
JDBC Receiver with Oracle Stored Procedures
configuring jdbc adapter with multiple tables
RFC -> XI -> JDBC Scenario Updating Multiple Tables
/people/alessandro.berta/blog/2005/10/04/save-time-with-generalized-jdbc-datatypes
JDBC Adapter multiple Selects
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=jdbc%20with%20multiple%20tables&cat=sdn_all
Regards
Chilla..

How to extract data from info cube into an internal table using ABAP code

HI
Can Anyone plz suggest me
How to extract data from info cube into an internal table using ABAP code like BAPI's or function modules.
Thankx in advance
regds
AJAY

HI Dinesh,
Thankq for ur reply
but i ahve already tried to use the function module.
When I try to Use the function module RSDRI_INFOPOV_READ
I get an information message "ERROR GENERATION TEST FRAME".
can U plz tell me what could be the problem
Bye
AJAY

How to extract data from Essbase to Flat File using ODI

Hi,
Anyone know how to extract data from Essbase to Flat File using ODI?
Thanks in advance.
Regards,
Sumardi

Hi,
Have you read through :-
Oracle Data Integrator Adapter for Hyperion Essbase Getting Started - http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/odiess_getting_started.pdf
Oracle Data Integrator Adapter for Hyperion Essbase User's Guide - http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/odiess_users.pdf
If you have read them and are still have a problem at what stage are you having the issues?
Cheers
John
http://john-goodwin.blogspot.com/

How to Extract Hierarchies from ECC6.00 to BI7.0 ?

Similar Messages

Maybe you are looking for